Oracle Warehouse Builder - 11g R2
Hi All,
Can you please share the installation specifications for OWB 11g R2?
Regards,
Pl check the documentation site - http://www.oracle.com/pls/db112/portal.portal_db?selected=6
HTH
Srini
Similar Messages
-
Problem with Starting with Oracle Warehouse Builder 11g Release 1
Hello,
I want to do the training modules for owb. I installed Oracle Databes 11g2 and was attempting to load all the demo files from the learning module Starting with Oracle Warehouse Builder 11g Release 1 (http://st-curriculum.oracle.com/obe/db/11g/r1/owb/owb11g_update_getting_started_intro/lesson1/less1_start.htm)
I get an error during the running of the tcl scripts in omb plus. Everything works until the last files in which an object cannot be found. I get the following error:
OMB02923: Attribute TIMES_CAL_MONTH_CODE of group SALES of operator SALES_OUT does not exist.
The only reference i can find to this is in the load_sales.tcl file from the zip-file and i have no idea what is going wrong. As a result 5 mappings are missing in the end result (all LOAD_.. mappings)
Can anyone assist me with this problem and provide a solution?
thank you in advanceAdditional information after looking at the tcl files and the data in OWB that was loaded.
The section where the error occurs connects two parts of a mapping, the OUTGRP1 and the SALES_OUT. THe SALES_OUT is based upon the cube Sales. This cube contains all the data that is being connected except for the 'TIMES_CAL_MONTH_CODE'. I have no idea based upon the code of the creation of the cube where they take the data from. None of the connected attributes is named specifically. The cube also contains the several groups, one of these is time. If you open the details of the group the list of input attributes lists the needed attribute but it is not listed seperatly like all the others that are connected for the mapping. Does anybody have an idea how to solve the problem based on this extra information and the code listed below.
Code connecting outgrp1 and sales_out:
OMBALTER MAPPING 'LOAD_SALES' \
ADD CONNECTION FROM ATTRIBUTE 'AMOUNT' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'AMOUNT' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'COST' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'COST' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'QUANTITY' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'QUANTITY' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT' \
ADD CONNECTION FROM ATTRIBUTE 'CHANNEL_SOURCE_ID' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'CHANNELS_SOURCE_ID' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'SUBCATEGORY_ID' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'PROMOTIONS_SOURCE_ID' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'PRODUCT_ID' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'PRODUCTS_SOURCE_ID' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'CITY_ID' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'CUSTOMERS_SOURCE_ID' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT' \
ADD CONNECTION FROM ATTRIBUTE 'FINISH_MONTH' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'TIMES_CAL_MONTH_CODE' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'
Code for creating the cube:
OMBCREATE CUBE 'SALES'\
SET PROPERTIES (BUSINESS_NAME, DESCRIPTION, DEPLOYMENT_OPTIONS)\
VALUES ('Sales Cube', 'Sales Cube', 'Deploy All')
OMBALTER CUBE 'SALES' ADD MEASURE 'AMOUNT'\
SET PROPERTIES (DATATYPE,PRECISION,SCALE,BUSINESS_NAME,DESCRIPTION)\
VALUES ('NUMBER',10,2,'Sales Amount','Sales Amount')
OMBALTER CUBE 'SALES' ADD MEASURE 'QUANTITY'\
SET PROPERTIES (DATATYPE,BUSINESS_NAME,DESCRIPTION)\
VALUES ('NUMBER','Sales Quantity','Sales Quantity')
OMBALTER CUBE 'SALES' ADD MEASURE 'COST'\
SET PROPERTIES (DATATYPE,PRECISION,SCALE,BUSINESS_NAME,DESCRIPTION)\
VALUES ('NUMBER',10,2,'Sales Cost','Sales Cost')
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'TIMES'\
SET REF LEVEL 'MONTH' OF DIMENSION 'TIMES' AT POSITION "1"
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'PRODUCTS'\
SET REF LEVEL 'PRODUCT' OF DIMENSION 'PRODUCTS' AT POSITION "2"
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'CHANNELS'\
SET REF LEVEL 'CHANNEL' OF DIMENSION 'CHANNELS' AT POSITION "3"
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'CUSTOMERS'\
SET REF LEVEL 'CITY' OF DIMENSION 'CUSTOMERS' AT POSITION "4"
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'PROMOTIONS'\
SET REF LEVEL 'SUBCATEGORY' OF DIMENSION 'PROMOTIONS' AT POSITION "5"
OMBALTER CUBE 'SALES' ADD COMPOSITE_DIMENSION 'SALES_COMP'\
SET REF DIMENSIONS ('PRODUCTS','CHANNELS','CUSTOMERS','PROMOTIONS');
OMBALTER CUBE 'SALES' IMPLEMENTED BY SYSTEM
puts "SALES defined" -
How to Install oracle warehouse builder repository
OS Enterprise linux for oracle
database 11G
I have installed oracle warehouse builder 11G .
Pls tell about any link to install Repository in linux environment.go to <ORACLE_HOME>/owb/unifiedrepos
directory
then run the following order
sqlplus "/ as sysdba" @clean_owbsys.sql
sqlplus "/ as sysdba" @cat_owb.sql SYSAUX
sqlplus "/ as sysdba" @unlock_owbsys.sql
sqlplus "/ as sysdba" @reset_owbcc_home <DB_ORACLE_HOME>
IF OWB has been installed with Oracle11g DB installation.
Then from design center itself you can configure the workspace.
Most cases this will resolve your issue. -
Workflow Monitor on Warehouse Builder 11g r2
Hi everyone,
I'm developing an ETL process using Warehouse Builder 11g r2 on Oracle Database 11g r2.
I don't find any information about installation and use of Workflow Monitor with this last release.
Before I used OWB e DB 10g r2 where I can find Workflow Monitor+Application Server+ Midtier in "Companion CD".
In 11g r2 there aren't a CD like that, and i don't now how to proceed.
The solution i thought is to use Workflow Monitor from 10g r2 companion cd but i hope in a better
and "updated" solution.
Can anyone suggest me?
Thank you!Thank you so much for your answer, but my question is slightly different.
From .../owb/wf I've just installed Workflow 2.6.4.
What I need is Workflow Monitor, a tool where you can
see the execution of a process using a web browser. -
Oracle Datawarehouse Builder 11g
I've been trying to install Oracle Datawarehouse Builder 11g on a WinXP 32bit machine, however, when browsing to the Repository explorer a "page cannot be displayed error" is being displayed. Basically all I've done so far is step through the installation wizard. Basic troubleshooting (see link below) did not improve matters as much; and neither did a nifty google search.
Has anyone encountered similar issues and found a solution?
Setting Up the Oracle Warehouse Builder Project
http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_extend_knowledge/less1_setting_up/less1_setting_up.htmlOracle Warehouse Builder (OWB) is not part of the Oracle Business Intelligence Applications technology stack, to which this forum is dedicated.
Try posting this request to the Warehouse Builder forum.
Warehouse Builder
Warehouse Builder -
Problem in import of MetaData file in Oracle Warehouse Builder 9.2
My Problem is Related to Oracle WareHouse Builder.My system's configuration is following :-
Machine : P4
Operating System :Windows XP
ORacle : Version 9.2
Oracle WareHouse Builder 9.2
Ram :1GB
SGA Size :Approximately 650M
I have 2 MetaData files which I have to import into OWB.
First file's size is 9M.It got imported properly in 4 minutes without any error.
2nd File's Size is 30M.when
I start importing this MEtaData file.It goes upto 35% in Progress Bar.But after that it does not show any improvement.
I have left the machine running with this option upto 24 hours.
But nothing happened .It still shows only 35%.
I have checked log file/Trace file/Alert log files ,but there is no error in these files.
If any body have any solution about it,Please reply ASAP.I am stucked in this problem from last 7-8 days.
Waiting for reply
Thanks & Regards
Harvinder SinghThanks for your reply Igor.
As posted the OWB 10.1.0 software is running against a 9.2.0.8.0. database, so OWB still uses DBMS_JOB instead of DBMS_SCHEDULER in this database. In addition I already tested scheduling a simple job to run an OS command as suggested in note 365539.1 , and job scheduling is working fine.
There are no invalid objects in this database.
Yasmin -
Problem in DB Link creation ( Oracle warehouse builder 3i )
I am facing a problem in DB Link creation.
Backend: Oracle 8i Server on my machine
DW Software: Oracle warehouse builder 3i ( client , repository asistant.....)
Operating system: Windows NT 4 SERVICE PACK 6
I wants to use the scott database( default database given by oracle ) as my input source.
How can I create the DB LINK ( for scott database) ?
How can I create the DB LINK ( for any other database) ?
Should I need to add anything in Setting of"ODBC DATASOURCE ADMINISTRATION"
==================
Settings done:
==================
DB Link Name :scott
Host name
Host name: my machine's ip address
port number: 1521
oracle sid: prashant ( my oracle sid)
user name:scott
password:tiger
==================
Gives error:
==================
Testing...
Failed.
ORA-02085 Database link %s connects to %s
*Cause: a database link connected to a database with a different name.
The connection is rejected.
*Action: create a database link with the same name as the database it
connects to, or set global_names=false.
Please change it to false by doing :
first option:
Log in the database with DBA privilege and use the command:
alter system set GLOBAL_NAMES = false
second option:
Change the GLOBAL_NAMES to false in database system parameter file, init.ora
==================
Options tried:
==================
1. I tried to change GLOBAL_NAMES = false but still not able to create the DB LINK.
2. As per suggestion of one the friend
"A file named "Logon.Properties" under the directory $OWB_HOME/wbapp
in this file please set the property
OWBSingleUserLockUsage = false"
I tried the same but it is still not working.
How should I proceed further.
I am expecting URGENT FEEDBACK.
Reply me on : [email protected]
From
PrashantI solved the problem.
Procedure I followed :
UNINSTALL ORACLE WRAEHOUSE BUILDER SOFTAWARE.
'GLOBAL_NAMES = FALSE' in init.ora file.
RESTARTED MY MACHINE.
INSTALL THE ORACLE WRAEHOUSE BUILDER SOFTAWARE. -
Oracle Warehouse Builder 10.1.0.4 on Windows 2008 - 64 bits
Hi Gurus.
I'm currently working with a customer who wants to migrate all their database-servers to Windows 2008 on 64-bits processors. They're using Oracle Database Enterprise Edition 10g Release 2 (10.2.0.4) and Oracle Warehouse Builder (10.1.0.4). The OWB-clients will still run on Windows XP. I've used the "Certify"-funcionality on Metalink, but it doesn't really answer my questions. (It does* ansver some of my questions, but it also raises a few new ones....)
My main question is: Can you run serverside OWB 10.1.0.4 on Enterprise Edition 10.2.0.4 for Windows 2008 64-bits?
Thanks in advance:-)
Best regards
Helge
Edited by: user613304 on Mar 6, 2009 11:10 PMNo.
Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
The desupport notice is available on Metalink (Note 376384.1).
The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics. -
Oracle warehouse builder - OWB & Oracle 10g Db on SuSE
hi folks,
i have Oracle 10g db on my laptop; and it runs great!
but since i am trying to gain skills in data warehousing and business inteligence, and after reading about oracle warehouse builder, i decided to install it on my laptop as well.
but i can not get my head around the docs for installing OWB.
is the only requirement for OWB to have an OWB_ORACLE_HOME environment variable on linux? how do we start OWB service automatically?
has anyone installed OWB with oracle on the same pc?
i would appreciate your comments.
thanks in advance,
NicolasThanks Andreas,
i have printed and followed the advice on these documents.
that is how i have got confused about this OWB_ORACLE_HOME.
i would very much appreciate if could provide me with some brief description of which environment variables are needed for OWB installation.
regards,
nicolas -
Oracle Applications Release 12 and Oracle Warehouse Builder 10gR2
Hi
I'm trying to deploying process flows to Workflow but I get the following error:
RPE-02054: The version of Oracle Workflow is incompatible with this Control Center. Required 2.6.3, but found 2.6.0.
Comment I found on another thread: "As far Workflow Versions with Oracle Applications is concerned, it is always 2.6.0. Workflow is not identified with its 2.6.x versioning in Oracle Applications. The 2.6.x.x versioning is purely for Workflow Standalone."
Oracle Warehouse Builder Client: 10.2.1.31
Oracle Warehouse Builder Repository: 10.2.0.1.0
Oracle Applications Release 12
Any help would be appreciated.May be the excerpt from the other thread is a response I posted.
So, when you say, deploying process flows to Workflow, I do not understand what you are doing exactly? If this involves the Oracle Warehouse Builder you may want to explain a little more in detail since I do not understand how OWB works with Workflow. But as far as I have heard, it is Workflow standalone that is packaged with OWB but you are deploying into Oracle Applications.
What is the version of Oracle Workflow Builder you are using?
Is the steps you are doing certified to be done with Oracle Applications R12?
Thanks -
Oracle Warehouse Builder 10.1.0.4
Hi All,
I am searching for Oracle Warehouse builder 10.1 release which is compatible with Oracle database 10gR2 on solaris x86 server.
I have found softwares for solaris sparc but nothing seems available for oracle 10gR2 on solaris x86.
OWB 10.1.0.3 is compatible with oracle database 10gR1 and owb 10.1.0.4 and owb 10.1.0.5 are only compatible with 10gR2.
Currently we are facing some problem with Owb 10.2.0.1 so we have to relay on owb 10.1 release.
Can any one help me to find link for downloading
OWB 10.1.0.4 or 10.1.0.5 for solaris x86 server...
ThanksI am still unable to find any owb 10.1.x.x release for solaris x86 environment.
Do any one have any link for this??
Message was edited by:
Fkhalid -
ORA-06502 pl/sql in Oracle warehouse builder
Hi,
I have a problem with using Name and Address operator in Oracle Warehouse builder. When I mapped a table which has more than 7735 rows to another table.
I will get the error "ORA-06502: PL/SQL: numeric or value error: character string buffer too small".
How can I solve this problem?
Thanks a lot!The problem is happening again.
When it happens, if I quit and I start again Oracle XE, the problem does not happen at first, but happens again after a while (the duration before the error is not always the same). If I increase the number of lines that are printed for the result of a request, I can induce the error; if I decrease the number of lines, the error is not happening.
Here is one of the request (that request returns about 5000 rows) that cause the error, and the complete error message:
ORA-06502: PL/SQL : erreur numérique ou erreur sur une valeur: tampon de
chaîne de caractères trop petit
Translation: buffer for the strings is too small.
select code_pers, nom, prenom, titre, sexe,
date_naissance, pays_nationalite.code_pays_iso,
fonction_institution, code_institution,
complement_adresse_institution, complement_tel_institution,
adresse1_perso_debut, adresse2_perso_rue, adresse3_perso_zip_ville,
pays_adresse.code_pays_iso,
tel_perso, email, site_web, fax,
lower(substr(langue_courrier, 1, 2)),
case
when (adresse_courrier_preferee = 'P') then 'p'
when (adresse_courrier_preferee = 'I') then 'i'
else null
end,
contact_rapide, discipline,
case
when (voeux = 'Vrai') then 'o'
when (voeux = 'Faux') then 'n'
else null
end,
nb_plaquettes, nb_affiches, date_modif
from personne2 join pays2 pays_nationalite
on personne2.nationalite = pays_nationalite.NOM_PAYS
join pays2 pays_adresse
on personne2.pays_perso = pays_adresse.NOM_PAYS -
Confuse about Configuring Oracle Warehouse Builder
newbie here... i am abit confuse on how to configure the Oracle Warehouse builder...
I have 2 database... 1 source and 1 new one...
I understand that i have to install the Runtime Repository in the database computer and the Target Schema through the client's computer...
so all this while... i am just confuse about what to install into the source database and what to install into the new database...
Please help...Location is a logical entity in your OWB design that can be either a database schema, a flat file location, an SAP application location etc. Once you complete your design and are ready to deploy the design into the runtime environment, you will have to 'register' the locations by providing the physical details of your location to OWB (user name/password, database, hostname etc.).
I am a bit confused by your configuration - are the source and the target in two separate schemas or in the same schema? Your posts are somewhat contradictory.
If they are in two different schemas, you should:
1. Create a source module pointing to a source schema (you can then import data object structures from the source schema - i.e. you don't have to create source tables manually in OWB, but you can import them into the module automatically). This module will have a source location (for example SRC_LOC).
2. Create a target module where all your target objects will be (i.e. where the data will be loaded). This module will have a different location (TGT_LOC). In your target module you will also create the mappings.
3. When deploying, you will register SRC_LOC with the physical details of your source schema, while the target location will be registered with the physical details of the target schema. The code generated by OWB during deployment will make sure that the data is extracted from the source schema and inserted into the target schema (either by generating and using DB links or by qualifying the schemas in the extraction queries if source and target are in the same database instance).
On the other hand, if both source and target objects are in the same db schema, you can have all your objects in the same target module and you will only have to register the location of this target module when deploying (LOC_TGT).
That said, there can be a variety of reasons why there is no data in the target after you run the extract mapping that have nothing to do with locations, such as logical errors in the mapping (an inappropriate filter or a wrong join), insufficient privileges etc. I suggest you take a look in the runtime audit browser that should contain the error messages relative to your mapping.
Regards:
Igor -
Dear buddies,
I need to migrate my tables and data from SQL Server 2005 to Oracle 10g.
My boss's requirement is I must be able to redo it at any point of time. Meaning, I should be able to use the script at any point to recreate the tables and reload them independently without using SQL Server or the existing configurations.
Does OracleWarehouse Builder provide such scripts after the migration or in the process of migration, which can be reused independently?
There are about 7 SQL Server databases and each has around 270 tables. Some would be totally new and some would involve merging.
Please advice me.
Thanks.
NithHi everyone,
I tried to Just started like this
1 - Start - All programs - Oracle Home - Warehouse Builder - Administration - Repository Assitant - Basic Install -
2 - User Name=rep_user
password=rep_user
sysdba user name = sys
sysdba password = the password i gave during the database creation (using dbca)
hostname=localhost
port number = 1521
oracle service name = test6 (the name for the database & instance for which i just created)
When I click Next, this error pops us:
INS009: Unable to connect to the database with user SYS. jaba.sql.SQLException: IO Exception: The Network adapter could not establish the connection.
The remaining disk space for that drive is few gigs and I have created the database with the 16384.
Please advice on how I should go about this.
I have been struggling to perform my migration. I really hope someone would be able to guide me through.
OS: Windows 2003 Enter Edition
Oracle 10g
And I am not able to access anything from SQL Plus after I installed Oracle Warehouse Builder.
So, is the error I am facing something like to do with a bad installation? Do I need to uninstall my OWB or uninstall my oracle and OWB and reinstall them?
Please guide me.
Nith
Thanks a lot.
Nith -
Download Oracle Warehouse Builder for True64
The link for download
Oracle Warehouse Builder v9.2.0.2.8 for Tru64 is broken in the page http://otn.oracle.com/software/products/warehouse/index.htmlThanks, this is now fixed.
OTN
Maybe you are looking for
-
Setting up Listener Password for Oracle 9.2.0.7
I am looking for information on configuration needed for "stopsap" when password is set up for the 9i listener.
-
Exit from Webdynpro abap application in portal environment
Hi, I created one custom service in Webdynpro ABAP in ESS and also integrated in the portal environment I need to put Exit button in every page ( OVERVIEW, EDIT, REVIEW). When user click on 'EXIT' button from any one of page , it should return back t
-
ISync can't be launched ... what do I do?
Am having all kinds of problems right now, and am not sure where to turn! Missing Sync won't sync, and in the error log it says, "The synchronization engine is not enabled. Launch iSync and choose Preferences from the iSync menu. Make sure 'Enable sy
-
Error During Connection Pool Reserve Test
When using Oracle 9 XA Thin JDBC driver on WLS 6.1sp3, I receive the following error when a reserved connection is tested. Any ideas? Thanks, -jb <Jul 31, 2002 9:03:26 PM PDT> <Info> <JDBC Pool test> <A connection from pool dsn was tested during rese
-
Photoshop CS6 memory leak?
PS currently takes 1.7GB of memory AFTER I have closed all the files. I have no plugins. The only thing that helps is restarting PS. Any thoughts? thanks