Oracle warehouse builder and windows vista

Hello All, I need to install oracle warehouse builder on PC with Windows Vista but Oracle Setup close installation program because it find JavaVirtualMachine (JRE) rel.6.0 but it need max jre 5.2.
How i can do for installing oracle warehouse builder ver. 10.2.1 ????
thanks for your answer
Marco Frosini

Hi,
I guess Marco confused the Installer message
==============
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2 . Actual 6.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Prog
ram Files\Oracle\Inventory\logs\installActions2007-07-08_12-43-29PM.log
Please press Enter to exit...
===========================
As I see it, It checkes the OS version, which is 6.0 for Vista (an internal version no), however, the installer supports only till 5.2. By my understanding its not the JRE version, but the OS version.
Besides this small misinterpretation, Has anybody found any way of installing OWB on Vista ?? I have Vista business on a HP laptop, and I NEED to run OWB...
All help is greatly appreciated...
regards
raghav..

Similar Messages

  • Oracle 10g XE and Windows Vista

    I bought a laptop with an excitement; and installed oracle 10g XE, now I can't run the oracle on this Windows Vista? Any guidance and suggestion would be much appreciated.
    I couldn't dare to install linux fedora on this laptop which has Windows Vista for a dual boot sytem because I read all negative things in google about the dual bootying system of fedora and windows vista. Any suggestion and guidance would be one again would be very much appreciated.
    [email protected]

    I have a problem with Oracle XE installed on my laptop 1GB RAM with Windows Vista :).
    It installed ok, but when I run my program (Visual Foxpro 9) it stays 30 seconds up to a minute to make a few selections.
    The same program on my laptop works fine with other databases installed on windows xp or windows 2003 server.
    Also, from other computers I can connect to Oracle XE on Windows Vista and make those selections fine.
    I uninstalled Oracle XE from my laptop.
    I downloaded Oracle Database 10g Release 2 (10.2.0.3) Enterprise/Standard Edition for Microsoft Windows Vista and I installed it.
    It's the same problem.
    On my laptop, my program (VFP9 - connects through ODBC) or PLSQL Developer freeze when I do a select from a table with 72053 rows (the result has 2000 rows).
    If I connect from another computer, where I installed Oracle Instant Client from Oracle Database 10g Client Release 2 (10.2.0.3) for Vista, the select runs instantaneously :)
    My head hurts very much at this time.
    We bought the laptop with Vista OEM for presentations :) - it's unusable at this point :)

  • Oracle Forms Builder in Windows Vista

    Hi.
    I have Windows Vista and when treatment to connect to me with Forms Builder vers. Forms [32 Bit] Version 9.0.4.0.19 generates to me east error according to the tests that I did has something to see with OCI_7 can help me please.
    The error is:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01009: missing mandatory parameter
    Thank you.
    Harold Hernan Gonzalez Potes
    Colombia

    Forms Builder vers. Forms [32 Bit] Version 9.0.4.0.19 is not certified to work with Vista. See
    http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html

  • Oracle 10g R2 and Windows Vista

    Hello,
    Our company has chosen Oracle as our DB standard and I'll have to migrate a medium-sized database running on Windows from MS-SQL Server to Oracle 10g R2. But I need to do an evaluation on my desktop. Is Oracle 10g already available on Windows Vista? If not, what are the plans?
    Note: can I do the evaluation on Windows XP professional? I'd prefer Windows Vista Premium because I have it running on a much faster machine.
    Your advice will be appreciated.
    Ellie

    Only Oracle Express Edition is currently supported on Windows Vista.
    Furthermore, Vista Premium won't be a supported edition anyway.
    Take a look to the Oracle Statement Of Direction
    Nicolas.

  • Oracle 10g Express and Windows Vista

    I am new to Express and this forum. I have been searching the Oracle site to see when Express will be Vista ready. I found some info that there are some tweeks that you can do to trick it to working on Vista. I would like to know when there will be an official release that is Vista compatible. Thanks PM

    Well, I posted this and then I did find a document that talks about the 10g Release 2 supports VISTA with some exceptions. Thanks PM

  • Installed Oracle Warehouse Builder which broke SQL Developer

    Version 1.5.4 build MAIN-5940
    SQL Developer worked fine. I installed Oracle Warehouse Builder and now SQL Developer cannot make a connection when I click on a connetion in the connectons window. When I look at the properties of the connection they look fine and when I click the "test" button I get a success message. When I click the "connect" button it appears to connect. However, When I click a connection on the navigator window I get this error message
    Invalid connection information specified.
    Verify the URL format for the speicified driver.
    Vendor Code 0
    I reinstalled SQL Developer but no help.

    Don't know OWB, but I asume it installs some version of client, which could be picked up by sqldev.
    If the problem really is that client, here's something that usually does it: trick sqldev by changing your ORACLE_HOME within a batch file inside sqldev's folder. This would force using the supplied thin driver:
    set ORACLE_HOME=%CD%
    start sqldeveloper.exeHope that helps,
    K.

  • Oracle Warehouse Builder - Connectivity

    Hi,
    I would like to Know that How can I Connect to an Ms Sql Server
    from Oracle Warehouse Builder and do the ETL , I heard that It
    can Talk to MS sql Server Directly.

    Hi,
    The gateway that Oracle provides for this purpose is Pure
    Integrate.In pure integrate define a project(as we do in
    warehouse builder).Then configure your ODBC source(it supports
    SQl server, MS Access and variuos other Databases).Once defined
    and configured take export of the project and import in
    warehouse builder.
    In OWB then You can keep on adding various modules and other
    object in the imported Projects.The imported project will have
    source module as configured in Pure integrate.With this you
    don't need to export SQl server objects as flat files.

  • Oracle Warehouse Builder 10.1.0.4 on Windows 2008 - 64 bits

    Hi Gurus.
    I'm currently working with a customer who wants to migrate all their database-servers to Windows 2008 on 64-bits processors. They're using Oracle Database Enterprise Edition 10g Release 2 (10.2.0.4) and Oracle Warehouse Builder (10.1.0.4). The OWB-clients will still run on Windows XP. I've used the "Certify"-funcionality on Metalink, but it doesn't really answer my questions. (It does* ansver some of my questions, but it also raises a few new ones....)
    My main question is: Can you run serverside OWB 10.1.0.4 on Enterprise Edition 10.2.0.4 for Windows 2008 64-bits?
    Thanks in advance:-)
    Best regards
    Helge
    Edited by: user613304 on Mar 6, 2009 11:10 PM

    No.
    Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
    The desupport notice is available on Metalink (Note 376384.1).
    The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.

  • Oracle Applications Release 12 and Oracle Warehouse Builder 10gR2

    Hi
    I'm trying to deploying process flows to Workflow but I get the following error:
    RPE-02054: The version of Oracle Workflow is incompatible with this Control Center. Required 2.6.3, but found 2.6.0.
    Comment I found on another thread: "As far Workflow Versions with Oracle Applications is concerned, it is always 2.6.0. Workflow is not identified with its 2.6.x versioning in Oracle Applications. The 2.6.x.x versioning is purely for Workflow Standalone."
    Oracle Warehouse Builder Client: 10.2.1.31
    Oracle Warehouse Builder Repository: 10.2.0.1.0
    Oracle Applications Release 12
    Any help would be appreciated.

    May be the excerpt from the other thread is a response I posted.
    So, when you say, deploying process flows to Workflow, I do not understand what you are doing exactly? If this involves the Oracle Warehouse Builder you may want to explain a little more in detail since I do not understand how OWB works with Workflow. But as far as I have heard, it is Workflow standalone that is packaged with OWB but you are deploying into Oracle Applications.
    What is the version of Oracle Workflow Builder you are using?
    Is the steps you are doing certified to be done with Oracle Applications R12?
    Thanks

  • Oracle Warehouse Builder 10g R2 and Reviewers Guide

    Are there any plans to provide the 'Oracle Warehouse Builder 10g Reviewers Guide' as published in August 2004 in the future also for OWB 10gR2?

    Not sure about a full blown Reviewers Guide, but the following tutorial contains most of the info from the previous reviewers guide:
    http://www.oracle.com/technology/obe/admin/owb10gr2_gs.htm
    Hope this helps,
    Scott

  • Discoverer and Oracle Warehouse Builder

    Discoverer 3.1 or 3.1 can catch hierchies from Oracle Warehouse Builder 2.0 or 2.1.
    What are the requisites?
    Excuse my English, i'm chilean.
    Please send me e-mail to
    [email protected]

    Doc URL http://technet.oracle.com/docs/products/warehouse/doc_index.htm
    Doc Name
    Discoverer Bridge Users Guide (361KB)

  • Problem in import of MetaData file in Oracle Warehouse Builder 9.2

    My Problem is Related to Oracle WareHouse Builder.My system's configuration is following :-
    Machine : P4
    Operating System :Windows XP
    ORacle : Version 9.2
    Oracle WareHouse Builder 9.2
    Ram :1GB
    SGA Size :Approximately 650M
    I have 2 MetaData files which I have to import into OWB.
    First file's size is 9M.It got imported properly in 4 minutes without any error.
    2nd File's Size is 30M.when
    I start importing this MEtaData file.It goes upto 35% in Progress Bar.But after that it does not show any improvement.
    I have left the machine running with this option upto 24 hours.
    But nothing happened .It still shows only 35%.
    I have checked log file/Trace file/Alert log files ,but there is no error in these files.
    If any body have any solution about it,Please reply ASAP.I am stucked in this problem from last 7-8 days.
    Waiting for reply
    Thanks & Regards
    Harvinder Singh

    Thanks for your reply Igor.
    As posted the OWB 10.1.0 software is running against a 9.2.0.8.0. database, so OWB still uses DBMS_JOB instead of DBMS_SCHEDULER in this database. In addition I already tested scheduling a simple job to run an OS command as suggested in note 365539.1 , and job scheduling is working fine.
    There are no invalid objects in this database.
    Yasmin

  • Problem in DB Link creation ( Oracle warehouse builder 3i  )

    I am facing a problem in DB Link creation.
    Backend: Oracle 8i Server on my machine
    DW Software: Oracle warehouse builder 3i ( client , repository asistant.....)
    Operating system: Windows NT 4 SERVICE PACK 6
    I wants to use the scott database( default database given by oracle ) as my input source.
    How can I create the DB LINK ( for scott database) ?
    How can I create the DB LINK ( for any other database) ?
    Should I need to add anything in Setting of"ODBC DATASOURCE ADMINISTRATION"
    ==================
    Settings done:
    ==================
    DB Link Name :scott
    Host name
    Host name: my machine's ip address
    port number: 1521
    oracle sid: prashant ( my oracle sid)
    user name:scott
    password:tiger
    ==================
    Gives error:
    ==================
    Testing...
    Failed.
    ORA-02085 Database link %s connects to %s
    *Cause:   a database link connected to a database with a different name.
    The connection is rejected.
    *Action:   create a database link with the same name as the database it
    connects to, or set global_names=false.
    Please change it to false by doing :
    first option:
    Log in the database with DBA privilege and use the command:
    alter system set GLOBAL_NAMES = false
    second option:
    Change the GLOBAL_NAMES to false in database system parameter file, init.ora
    ==================
    Options tried:
    ==================
    1. I tried to change GLOBAL_NAMES = false but still not able to create the DB LINK.
    2. As per suggestion of one the friend
    "A file named "Logon.Properties" under the directory $OWB_HOME/wbapp
    in this file please set the property
    OWBSingleUserLockUsage = false"
    I tried the same but it is still not working.
    How should I proceed further.
    I am expecting URGENT FEEDBACK.
    Reply me on : [email protected]
    From
    Prashant

    I solved the problem.
    Procedure I followed :
    UNINSTALL ORACLE WRAEHOUSE BUILDER SOFTAWARE.
    'GLOBAL_NAMES = FALSE' in init.ora file.
    RESTARTED MY MACHINE.
    INSTALL THE ORACLE WRAEHOUSE BUILDER SOFTAWARE.

  • Oracle Warehouse Builder

    Dear buddies,
    I need to migrate my tables and data from SQL Server 2005 to Oracle 10g.
    My boss's requirement is I must be able to redo it at any point of time. Meaning, I should be able to use the script at any point to recreate the tables and reload them independently without using SQL Server or the existing configurations.
    Does OracleWarehouse Builder provide such scripts after the migration or in the process of migration, which can be reused independently?
    There are about 7 SQL Server databases and each has around 270 tables. Some would be totally new and some would involve merging.
    Please advice me.
    Thanks.
    Nith

    Hi everyone,
    I tried to Just started like this
    1 - Start - All programs - Oracle Home - Warehouse Builder - Administration - Repository Assitant - Basic Install -
    2 - User Name=rep_user
    password=rep_user
    sysdba user name = sys
    sysdba password = the password i gave during the database creation (using dbca)
    hostname=localhost
    port number = 1521
    oracle service name = test6 (the name for the database & instance for which i just created)
    When I click Next, this error pops us:
    INS009: Unable to connect to the database with user SYS. jaba.sql.SQLException: IO Exception: The Network adapter could not establish the connection.
    The remaining disk space for that drive is few gigs and I have created the database with the 16384.
    Please advice on how I should go about this.
    I have been struggling to perform my migration. I really hope someone would be able to guide me through.
    OS: Windows 2003 Enter Edition
    Oracle 10g
    And I am not able to access anything from SQL Plus after I installed Oracle Warehouse Builder.
    So, is the error I am facing something like to do with a bad installation? Do I need to uninstall my OWB or uninstall my oracle and OWB and reinstall them?
    Please guide me.
    Nith
    Thanks a lot.
    Nith

  • Oracle Warehouse Builder Problem

    Hello All,
    I have just installed oracle warehouse builder 10g on windows 2000 system.
    My database is oracle 10gR2
    While connecting Oracle Repository Assistant, when I provide sys user/password and other credentials i got following error:
    INS0003: OWB Repository Installation cannot continue without DBA privileges. Connect as DBA and use option Create a New Warehouse Builder Repository to continue the process.
    Sys user is already having sysdba rights. I have tried to login with another dba account but still same error.
    Any help??

    Hello,
    I have found the solution to this problem.
    Metalink note: 332371.1
    There ware problem with compatibility of OWB10.1 with Oracle database release 10.2...
    I have installed oracle 10gR1 and now it is working.

Maybe you are looking for