Oracle web logic crashing other services on same server
Hello,
I have three servers in a cluster. Everything runs great. All of a sudden they can no longer speak to eachother on port 7001. But then they can again, and then they can't, then they can. QUICK hits. Also other services on the same boxes are taking hits as well including the ssh services that are running on all three. Again. Quick hits. Interestingly enough when the service does take a hit, it will continue to listen on port 22.....I haven't gotten a change to check bandwidth utilization, but those are gig switches, and I don't think these things are sending gigs worth of data to each other in bursts. Physical cabling is good between the servers and the switch. It's services on the box that are taking hits. When we restart web logic, everything is great for a few days and then this issue will start up again. Any input would be appreciated.
Thanks,
Dice.
Hi Dice,
I agree with Kalyan recommendation to assess the health of your cluster, so please do that.
That being said, your comment regarding Weblogic restart is very important as well. Did you also assess the health of your JVM garbage collection & CPU during these spikes? Global VM collections e.g. Full GC can be quite intrusive and cause JVM to hang. When JVM hangs, Weblogic Server Socket port (associated with that VM) may not reachable depending how long GC runs, what policy you use, capacity of your physical server, # of physical cores etc.
Please see of these QUICK hits that you refer actually correlate with Full GC cycles from one or more JVM's running from that host.
Please also share the specification of your JVM (vendor e.g. HotSpot vs. IBM vm vs. Jrockit, Heap size, 32-bit vs. 64-bit etc.) and physical host (speed & # of cores, OS etc.)
If system is fine for few days then start to degrade, then please look for some JVM leak patterns.... A JVM memory leak means OldGen/tenured space growing over time, so will GC elapsed time & frequency until you start to notice global impact & degradation.
Please share any data that you have on the above so we can rule that out.
If you are not using any monitoring at this point, I recommend at minimum that you enable verbose:gc so we can assess the health of your JVM's running from that host.
Thanks.
P-H
http://javaeesupportpatterns.blogspot.com
Similar Messages
-
Issue in calling web service from SoapUI 4.0.0 to Oracle web logic server10
Hi All,
I am trying to call a web service from soapUI 4.0.0 to Oracle Web logic server 10.3 in which primavera p6 war file is deployed..
getting an error::*this class does not support saaj 1.3*
setting the following system property in the Weblogic startup script:
-Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl does not work..
setting the following system property in the Weblogic startup script:
-Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl
even does not work..
how to resolve this error,plz help me its urgent..Have you tried submitting your help request on the SmartBear soapUI forum?
http://www.eviware.com/forum/viewforum.php?f=5
Or if a soapUI Pro user:
http://www.eviware.com/forum/viewforum.php?f=2
Best,
Alex -
Run Oracle Web Logic and Oracle Application Server 10g on same server
Since oracle has chosen to release adf faces 11g, before the SOA suite 11g is released, we are facing the challenge to run both Oracle Web logic and Oracle Application Server 10g on the same server.
If anyone have any experience in this setup or has knowledge of other feasable setups please let me know.
Regards.
JanWhat version of Oracle Application Server 10g are you installing?
If you are installing 10gR2 (v10.1.2.x) have you taken a look at point #70 in "Table 2 Additional Information for Certified Platforms" section here?
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
Thanks
Shail -
Hi All,
I have here a 6509-E chassis with a Sup720 in it and an ACE module also in it.
Our enviornment is getting oracle web-logic virtual servers via OVM. Our ERP team would like to be able to load-balance to the web servers located in the oracle OVM box. The Oracle OVM stuff, as near as I can make out uses java processes to direct traffic once it hits the box to the virtual web servers it contains. The java processes listen on different ports, thereby meaning there can be loads of web servers on the one box assuming the physical box has enough resources.
That said, I currently have three web servers all sitting on the one physical box.
For example:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
server1 = http://10.1.95.70:9999
server2 = http://10.1.95.70:9888
server3 = http://10.1.95.70:9777
The Company bought ACE modules a while ago and we'd like to be able to use them to load balance across the three servers (there are a lot more than three but this illustrates the point).
In the configuration of the ACE module, the rserver mode (real server) requires an IP to be assigned to the rserver, this is the real IP address of the actual server and is classes as 'serverside' I think:
eg
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
rserver host SVR_9999
description Real Server 9999
ip address 10.1.95.70
inservice
As the second web server also resides on that same IP, should it not also have the same IP? ie
rserver host SVR_9888
description Real Server 9888
ip address 10.1.95.70
inservice
When I try to enter in the ip address however it errors out with a duplicate:
ACE1/TEST_CTX(config)# rserver host SVR_9888
ACE1/TEST_CTX(config-rserver-host)# ip address 10.1.95.70
Error: Duplicate IP address or subnet
My question is: Is there a way I can use the ACE module to load balance to different web servers on the one IP address (assuming the rest of the configuration is fine)? Something that would achieve the following eg?
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
rserver host SVR_9999
description Real Server 9999
ip address 10.1.95.70:9999
inservice
rserver host SVR_9888
description Real Server 9888
ip address 10.1.95.70:9888
inservice
Many thanks in advance.
BradHi
You need to create one rserver and multipul serverfams with port number as follow.
rserver host SVR_1
description Real Server
ip address 10.1.95.70
inservice
rserver host SVR_2
description Real Server
ip address 10.1.95.70
inservice
serverfarm host SRV_9999
rserver SVR_1 9999
inservice
rserver SVR_2 9999
inservice
serverfarm host SRV_9888
rserver SVR_1 9888
inservice
rserver SVR_2 9888
inservice
serverfarm host SRV_9777
rserver SVR_1 9777
inservice
rserver SVR_2 9777
inservice
sticky ip-netmask 255.255.255.255 address both STICKY_9999
timeout 510
replicate sticky
serverfarm SRV_9999
sticky ip-netmask 255.255.255.255 address both STICKY_9888
timeout 510
replicate sticky
serverfarm SRV_9888
sticky ip-netmask 255.255.255.255 address both STICKY_9777
timeout 510
replicate sticky
serverfarm SRV_9777
class-map match-all VIP_9999
2 match virtual-address xxx.xxx.xxx.xxx tcp eq 9999
class-map match-all VIP_9888
2 match virtual-address xxx.xxx.xxx.xxx tcp eq 9888
class-map match-all VIP_9777
2 match virtual-address xxx.xxx.xxx.xxx tcp eq 9777
policy-map type loadbalance first-match SLB_ORACLE_9999
class class-default
sticky-serverfarm SRV_9999
policy-map type loadbalance first-match SLB_ORACLE_9888
class class-default
sticky-serverfarm SRV_9888
policy-map type loadbalance first-match SLB_ORACLE_9777
class class-default
sticky-serverfarm SRV_9777
policy-map multi-match ORACLE
class VIP_9999
loadbalance vip inservice
loadbalance policy SLB_ORACLE_9999
loadbalance vip icmp-reply
class VIP_9888
loadbalance vip inservice
loadbalance policy SLB_ORACLE_9888
loadbalance vip icmp-reply
class VIP_9777
loadbalance vip inservice
loadbalance policy SLB_ORACLE_9777
loadbalance vip icmp-reply
interface vlan xx
ip address yyy.yyy.yyy.yyy 255.255.255.0
service-policy input ORACLE
Regards,
Vashdev -
Error while running application under Oracle Web logic server 10.3
Hi all,
I am using Oracle Web logic server 10.3 to run reports(CR4E).when at the time of adding server in to crystal report application
i had taken Application Development Support Then at run time it is showing following error message
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException---- Error code:-2147467259 Error code name:failed
How to Solve these critical problem
Thanks ,
Amol PatilHi Rahul,
Server logs may contain JDK warnings such as the following if the jdk folder is an mklink.
*[WARN ][osal ] Could not add counter (null)\ for query*
*[WARN ][osal ] Failed to init virtual size counter.*
These are just warnings and do not affect any servers.
Workaround
To suppress these warnings, add the following line in the FRAMEWORK_LOCATION\provisioning\provisioning-plan\fusionapps_start_params.properties file
-Xverbose:osal=error
You can even try the solution provided in below link
http://hirt.se/blog/?p=169
Regards
Fabian -
Monitor loggedin user in Oracle Web Logic Server
Dear All,
We are using IPM (11.1.1.3.0) with Oracle Web Logic Server 10.3.3.0 (Embedde LDAP).
Can you please let me know how to monitor user login sessions (which user login at what time to the system, when he last loggedin) from Web Logic Server ?
Also let me know whether it is possible to create a monthly report of each user login duration and how can I do it.
Thank You>
For Oracle Forms and Reports 11g Release 2 (11.1.2), download Oracle WebLogic Server 11g (10.3.5) from OTN or
>
from http://docs.oracle.com/cd/E23104_01/download_readme_cr2/download_readme_cr2.htm#BABDBHCJ
Oracle Fusion Middleware 11g Software
http://www.oracle.com/technetwork/middleware/weblogic/downloads/index.html -
Oracle Web Logic Server requirement
Dear All
Currently my system use jboss now I want to change to use ORACLE WEB LOGIC SERVER, Thus I would like the per-requisite on capability as cpu, ram, server ...
Please clarify me, otherwise provide me the advantages on it
ThanksHi,
Please check the below link for system requirements to install Weblogic.
Preparing for Installation - 11g Release 1 (10.3.6)
Thanks,
Sharmela -
Change from jboss to Oracle Web Logic Server
Dear all
Currently, we have used the jboss for start T24 Browser, ATM, ... Now we want to change it to ORACLE WEB LOGIC SERVER
Could you please guide me detail as per-requisist , license , how to configure, where could i download to test it?
ThanksHi,
Please follow the below steps :-
1)In order to install Weblogic it depends on the type of OS bit version.
If you would install it on a 32 bit version then it has embedded JDK in it but if you use 64 bit then you need first either install Sun JDK or Jrockit JDK 64 version and download the Generic jar and install it.
Java 64 bit could downloaded from the below URL :-
http://www.oracle.com/technetwork/java/javase/archive-139210.html
Note :- Java 8 is not supported or certified with Weblogic.So request you to either use Java 6 or Java 7 depending upon the version of Weblogic and its certification.
====
2)Could you please refer to the below certification matrix to verify if the OS is supported with Weblogic on which the configuration would be done :-
Oracle Fusion Middleware Supported System Configurations
Either you could use Weblogic 12C or Weblogic 10.3.1 to 10.3.6 depeding upon your requriement.
3)Please follow the below link where all the Weblogic installers could be downloaded :-
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
"Accept the License " to download the installers.
4)Regarding License it would be better to check with Oracle SAN for you account or contact Oracle Support depending upon the region you belong to by following the below URL :-
http://www.oracle.com/us/support/contact/index.html
Regards,
Prakash. -
Oracle Map Viewer Application on Oracle Web Logic
We have developed an application using map viewer, Oracle 10g and deployed it in Oracle AS 10g. It was running fine and OK. Now we switched over the same application to Web logic10.3, using map viewer 10.1.3.3, Oracle db11g, JDeveloper 11g. We could deploy successfully on Web logic. The problem encountered is that During the map display (mapviewer.run()), an exception “Map viewer cannot process your map request. Check map viewer log for details.” is coming. We checked Map viewer log file and found no comments.
If your web server is working and the forms server is running type:
http://ip addr:port/dev60html/runform.htm
You need to put the ip address or name of your server in and the port number apache is running on (leave blank if this is 80).
This gives you the Oracle Forms start screen.
cheers
tony -
Is it mandatory to install oracle web logic server along with EM?
Hello All, I am a new user for EM. i was going through the EM installation with OBE. I found that Web logic server installation is thier along with EM but my question is if i am not monitoring my application (which is SAP) with the help of EM then is it compulsory to install web logic server. i want EM only for Database Monitoring.
Thanks in advance.
Regards,
AjayHello Rob,
Thank you very much for the answer. I had a check in installation guide from oracle documentation and i came to know that it is a prerequisite for oracle 11 release.
Thanks & Regards,
Ajay -
Installing BOE XI 3.1 and Data Services on same server, recommended or not?
I am fairly new to the BusinessObjects world.
I have been told that it is not recommended that both BOE and Data Services exist on the same server. I was just wondering if
there is any documentation (best practice) or technical reason why these two could not coexist on the same server so that I can provide that to our server administrators.
Thanks in advance for the assistance.
-Abel DuranHello,
you can do that for Test and Integration Environmenr but i would not recommend it on Production.
I noticed that not the RAM utilization is the "problem" with DS its more the Disk I/O. If you have the Filestore from BOE on the same physikal Disk as the JobServer from DS your Reportviewieng could be a bit slower.
Regards
-Seb. -
Problems with Oracle Web Logic 10.3.6, certificates and proxies
Good morning.
We are trying to establish a SSL connection using Apache Cxf and WebLogic Server 10.3.6.
For that, we are passing through a proxy. Using Apache Tomcat, the test is ok, we can connect to the endpoint correctly. But in WebLogic 10.3.6, we have problems with the certificates.
In our code, we are loading the certificates programatically.
The web-services-config.xml is the following:
<?xml version="1.0" encoding="UTF-8"?>
<beans
xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd http://cxf.apache.org/configuration/security http://cxf.apache.org/schemas/configuration/security.xsd http://cxf.apache.org/transports/http/configuration http://cxf.apache.org/schemas/configuration/http-conf.xsd http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-2.5.xsd"
xmlns:http="http://cxf.apache.org/transports/http/configuration"
xmlns:sec="http://cxf.apache.org/configuration/security" xmlns:jaxws="http://cxf.apache.org/jaxws"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.springframework.org/schema/beans">
<jaxws:client address="@SNE.SNE_WS_URL@"
serviceClass="com.bankia.sne.ws.clientes.buzonAPESNE.APESNEBuzonWSTipoPuerto"
id="puertoAPESNEBuzonWS" />
<http:conduit name="@SNE.SNE_WS_URL@">
<http:client Connection="Keep-Alive" AutoRedirect="true"
ProxyServerType="HTTP" ProxyServerPort="@SNE.PROXY_PORT@"
ProxyServer="@SNE.PROXY_HOST@" />
<http:proxyAuthorization>+
<sec:UserName>@SNE.PROXY_USER@</sec:UserName>
<sec:Password>@SNE.PROXY_PASSWORD@</sec:Password>
</http:proxyAuthorization>
<http:tlsClientParameters>
<sec:cipherSuitesFilter>
<!-- these filters ensure that a ciphersuite with export-suitable or
null encryption is used, but exclude anonymous Diffie-Hellman key change
as this is vulnerable to man-in-the-middle attacks -->
<sec:include>.*EXPORT.*</sec:include>
<sec:include>.*EXPORT1024.*</sec:include>
<sec:include>.*WITHDES_.*</sec:include>
<sec:include>.*WITHNULL_.*</sec:include>
<sec:exclude>.*DHanon_.*</sec:exclude>
</sec:cipherSuitesFilter>
</http:tlsClientParameters>
</http:conduit>
</beans>
That's the code used for establish the CXF connection:
private void configuraConexion(Buzon buzon){
try {
LOGGER.debug("Configurando conexión con el sevicio Web para el buzón con id " + buzon.getId() + " ...");
Client client = ClientProxy.getClient(puertoAPESNEBuzonWS);
HTTPConduit httpConduit = (HTTPConduit) client.getConduit();
TLSClientParameters tlsParams = httpConduit.getTlsClientParameters();
Certificado certificado = buzon.getCertificado();
byte[] bytes = certificado.bytesCertificado();
CertificadoSerializable certSerializado = (CertificadoSerializable)Serializador.desserializar(bytes);
//Cargamos el truststore de disco
TrustManagerFactory trustFactory = TrustManagerFactory.getInstance(TrustManagerFactory.getDefaultAlgorithm());
KeyStore truststore = KeyStore.getInstance(Propiedades.getProperty(KEY_SERVICIO_WEB_ALMACEN_TRUSTSTORE));
String contrasenia = Propiedades.getProperty(KEY_SERVICIO_WEB_TRUSTORE_PASSWORD);
// -- provide your truststore
File ficheroTruststore = null;
String rutaTrustore = Propiedades.getProperty(KEY_SERVICIO_WEB_TRUSTORE_RUTA) Propiedades.getProperty(KEY_SERVICIO_WEB_NOMBRE_TRUSTSTORE);
LOGGER.debug("rutaTrustore --> " + rutaTrustore);
if (rutaTrustore!=null){+
ficheroTruststore = new File(rutaTrustore);
URL url = null;
if(ficheroTruststore == null || !ficheroTruststore.exists()){
url = Localizador.getResource(Propiedades.getProperty(KEY_SERVICIO_WEB_NOMBRE_TRUSTSTORE));
ficheroTruststore = new File(url.getPath());
truststore.load(url.openStream(), contrasenia.toCharArray());
}else{
truststore.load(new FileInputStream(ficheroTruststore), contrasenia.toCharArray());
LOGGER.info("[ServicioWSBuzonAPESNEImpl.configuraConexion] Fichero truststore.pks recuperado de "+ficheroTruststore.getPath());
trustFactory.init(truststore);
TrustManager[] tm = trustFactory.getTrustManagers();
tlsParams.setTrustManagers(tm);
//Cargamos el Keystore de base de datos
KeyStore keyStore = KeyStore.getInstance(Propiedades.getProperty(KEY_SERVICIO_WEB_TIPO_ALMACEN_KEYSTORE));
keyStore.load(null, certificado.getContrasenia().toCharArray());
keyStore.setKeyEntry(certificado.getAlias(), certSerializado.getClavePrivada(), certificado.getContrasenia().toCharArray(), certSerializado.getCadena());
// set our key store+
// (used to authenticate the local SSLSocket to its peer)
KeyManagerFactory keyFactory = KeyManagerFactory.getInstance(KeyManagerFactory.getDefaultAlgorithm());
keyFactory.init(keyStore, certificado.getContrasenia().toCharArray());
KeyManager[] km = keyFactory.getKeyManagers();
tlsParams.setKeyManagers(km);
httpConduit.setTlsClientParameters(tlsParams);
LOGGER.debug("Conexión configurada satisfactoriamente");
}catch (Exception e) {
LOGGER.error("Error al configurar la conexión del servicio Web", e);
throw new WSBuzonException("Error al configurar la conexión del servicio Web: " + e.getMessage());
We don't know how to solve this issue? Please, could you help us?
Thanks in advance,
Jaime.
Edited by: j2eedevelopment on 10-jul-2012 10:05Hi Zack, thanks for the answer.
I've cleaned the code below.
Our problem is the following: we wan't to use many keystores, in function the user who is connected in the application. For that reason, we wan't to give the keyStore from Java Client, because we've saw that, in WebLogic, you can select one keystore, but only one. For that reason, we wantto change the keystore in run time execution, dinamically.
The problem we have found are the following:
1) If we configure WebLogic with the correct keystore and trustore, we are not able to change keysotre and trustore in runtime execution, so we have to us always the same keystore and we don't want this.
2) Also, I'm trying now to use JaxWS instead Apache Cxf, and I've tried to put the ssl properties of the system with the following code:
System.setProperty(JAVAXNETSSLTRUST_STORE, trustore);
System.setProperty(JAVAXNETSSLTRUST_STORE_PASSWORD, trustStorePassword);
System.setProperty(JAVAXNETSSLKEY_STORE, keyStore);
System.setProperty(JAVAXNETSSLKEY_STORE_PASSWORD, keyStorePassword);
System.setProperty(JAVAXNETSSLKEY_STORE_TYPE, keyStoreType);
Thanks in advance,
Jaime. -
Oracle Web Logic/Transaction/BSSV/Fusion TRAINING
Hi, I'm an Oracle JD Edwards EnterpriseOne CNC Consultant. I am working with a client that has become my primary client that is using Oracle Fusion, Transaction Server, XPI Server, and Business Services Server. I have very little experience working with Oracle Fusion, XPI Server and Transaction server. However, this client uses all these servers as a large part of there business and I will eventually be responsible for supporting all these servers.
So, I have been trying to find the best source and classes (s) that would best help me 1.) understand how all these different servers/components work together, and 2.) get training on how to setup and manage/administer these servers.
Could you please give me your thoughts on what sources/classes I should focus on? I went out to the Oracle University website but there are like a million different classes out there and I have no idea which one or ones to focus on.
Any help would be greatly appreciated!
Thanks,
JonokKarol wrote:
Hello DBA's
Just to understnad soemthing?
What's WebLogic? is't like HTTP? it replaces HTTP? I mean Is the New WebServer fro ORACLE?
And Fusion MiddleWear?
thxs if you can briefly answerWebLogic Server (WLS) is the new version of application server and replacement to Oracle Application Server (OAS). OAS stopped at Java J2EE 1.4. WLS handles JEE 1.5 and higher.
Fusion Middleware is the new set of "servers" based on WLS that replace and extend the functionality started with OAS. Fusion Middleware is the 11g brand. Oracle Application Server is the 10g brand.
Fusion Middleware breaks out all the components so yuo can pick and choose what you want and install each separately. OAS did all the install in one unified lump and you would only configure what you wanted.
To get to Oracle Application Server, you would go through an HTTP server. You can still do that with WebLogic Server, although it is not necessary as WLS understands basic HTTP well enough to accept requests directly.
So you had Forms Server 10g based on OAS, and now you have Forms Server 11g based on WLS.
And Discoverer 10g in OAS Enterprise Edition, becomes Discoverer 11g add-on to WLS.
And so on. -
We have purchased 10 user oracle weblogic licenses, in the oracle e-delivery site i can find a single file for installation it is not specified as per processor or per user. How can we mention 10 user during installation.
user12874468 wrote:
We have purchased 10 user oracle weblogic licenses, in the oracle e-delivery site i can find a single file for installation it is not specified as per processor or per user. How can we mention 10 user during installation.For many years now, Oracle has not enforced the license limits. You are free to go above those limits at any time.
However, if you do not have self-control, Oracle is free to ask for additional funds when they do their periodic audit. -
Web Logic Server Administration Console
Hi All,
I loged into Admin Console of Oracle Web Logic Server Administration Console
For DeployingP6WebServices::
Created aWebLogicdomain for the WebServices application.
DeployingP6WebServicesintotheWebLogicdomain. giving an error:
In Deployments Tab which is left corner:Deployed a WAR File but while starting all rquests its giving me the java error
javax.servlet.ServletException: [HTTP:101249]
[weblogic.servlet.internal.WebAppServletContext@d025b9 - appName: 'p6ws', name: 'p6ws.war', context-path: '/p6ws', spec-version: 'null']:
Servlet class org.apache.cxf.transport.servlet.CXFServlet for servlet cxf could not be loaded
because the requested class was not found in the classpath .
java.lang.ClassNotFoundException: org.apache.cxf.transport.servlet.CXFServlet.
Please help me its urgentcheck in the documentation http://www.oracle.com/technetwork/indexes/documentation/index.html , select your primavera version, and check document called: tested_configuration, check if you are using the right weblogic and jdk version for your primavera p6 version.
Maybe you are looking for
-
Unable to connect offcard terminal with jcop simulator
Hi all, I have made a JavaCard applet, called DisplayApplet. I am using Eclipse with the JCOP tools plugin. But now I want to make use of an own Terminal that connects to the applet and communicates to it using APDUs. I don't have a smart card reader
-
How do I update Adobe Creative Suite Design Standard from CS5.0 to CS5.5?
How do I upgrade CS Design Standard from 5.0 to 5.5?
-
Slow reloading issue with Safari 5.1.2/Mac OS X 10.6.8
Hello, I am using Safari 5.1.2 on Mac OS X 10.6.8. I encountered 2 serious problems: 1. some web pages load real slow as slow as taking more than 2 minutes. This behavor seems related to Javascript enabling. If I go to preference/security to unch
-
Can I use sprites on images in Flash?
Hi, I'm designing a calculator-like application in Flash for a school IT project. I made the layout in photoshop, and want to lay out the buttons with sprites (was just on CSS so addicted to those things xD ). I've tried googling and have found somet
-
No administrator found for the task error message
Dear all, I got the message "No administrator found for the task" when the MSS user try to approve and overtime. When i double click on the error for details, it actually give WF notification:work item cannot be executed message no. 5W141. As got ove