Oracle WebLogic Server with Oracle Developer 10g

Hello Friends
Currently I have customize product with I am using Oracle Developer 10gR2 as Front End, AS10gR2 as Middle Tier and DB10g as Back End. Now I want to replace the Middle Tier by Oracle WebLogic. My question is to all of you that Is it possible? If yes then I would like to request all of you please share some configuration document or Metalink Note ID which can help me to configure it.
Thanks
Makshud

This link should answer your questions.
http://www.oracle.com/technology/products/jdev/htdocs/11/as_supportmatrix.html
I cant find your configuration listed.
thanks,
Anoop

Similar Messages

Combination: oracle 9i server with Oracle 10g client??

Hello, we are running R/3 4.6C on Windows cluster system (node1-DB instance and node2-Central instance) and on Oracle 9i server. We also have several dialog instances running Oracle client 9i. Hardware and software (sap, oracle, windows) - everything is 32bit.
We are replacing those several old application servers (=dialog instances) with new X86_64 hardware and Windows 64 bit + Oracle client 64 bit. The question is: is it possible (and also supported) to install Oracle client 10g 64bit on new application servers? We are not planning to upgrade DB server to Oracle 10g yet!! So, can we run DB server on oracle 9i 32bit and oracle client 10g 64bit on applicaton servers??
Thank you very much!
Best regards, Igor

Hello,
To Andreas:
A little puntualization:
the oracle client software version depends on the sap version and not on the oracle server version...as far as i remember, oracle client 10 is either supported for sap kernel 7.00 or the brtools 7.00, which means that you cannot use oracle client 10 with sap kernel 46D_EXT
This is correct for <i>UNIX</i> systems, not for windows.
On windows the client to be used is the same version as the RDBMS.
I think this also answers Igor question.
If you RDBMS software is 9i then you have to use the client 9i

Integrating BEA weblogic server with Oracle Advanced Queue

Hi all,
Does any one has experience in configuring Weblogic server interface/listen to Oracle AQ.

Hi all,
Does any one has experience in configuring Weblogic server interface/listen to Oracle AQ.

Oracle Mobile Server with SQLLite/Berkeley Db and dbsql

Hi all,
i am not sure if i am correct here but hopefully i am.
In the past we have had Oracle Mobile Server with Oracle Lite.
We decided to switch to new mobile Server because oracle webtogo is not longer supported and incompatible with windows 7. My administrator did migration of mobile server but migration utility reported that the available applications are incompatible.
So I decided to create a completely New Publication with a Java application. The new Publication contains only one publication Item. For the first tests I simply wanted to spool out the data contained in my local database.
In bin directory of sqlite folder i can find a utility named "dbsql". I understood it in this way that I can attach to an existing database file and take a look into that database.
If i call dbsql.exe BerkeleyTest all seems to be ok. But if i try to select some data from that file i only get the errormessage that databse is in wrong format or encrypted. What am i doing wrong there?
Am I right that the sql interface (I need that interface because I dont want to rewrite dataaccesslayer of my app) is only available in sqlite but not on "BerkeleyDb"?
Is anyone here to help me a little bit with my problem here?
Regards!
Martin

I do not know much about Oracle Mobile Server with Oracle Lite, does it use SQLite or BDB? I do know that databases created by SQLite cannot be read by Berkeley DB SQL (of which dbsql.exe is part of), and databases created by Berkeley DB SQL cannot be read by SQLite. Also, databases created by Berkeley DB outside of the SQL API cannot be read by the BDB SQL API. You can open BDB SQL databases with BDB outside of the SQL API, but I would not recommend that outside of a few BDB utilities described in the documentation. So if your BerkeleyTest database was created by SQLite or BDB outside of the SQL API, then it makes sense that dbsql.exe is returning an error when trying to read it.
Calling dbsql.exe BerkeleyTest does not open the database, that happens when the first operation is performed on it, which is why you did not get an error until you tried to select something.
Lauren Foutz

Using WebLogic Server with Oracle9i RAC

A new white paper has been posted to dev2dev -
"Using WebLogic Server with Oracle9i RAC" at
http://dev2dev.bea.com/products/wlserver81/whitepapers/wls_bea_hp.jsp
Abstract:
"This paper presents best practices when using WebLogic Server with Oracle Real Application Clusters. It includes an analysis of
various use-case and failure scenarios and proposes possible recovery solutions. This paper also includes an evaluation of
Transparent Application Failover, a product from Oracle that is functionally similar to WebLogic Server MultiPools."

"satyam" <[email protected]> writes:
Can I use WebLogic Application Server 6.0, the mid level server (not the express
or the enterprise version)
with VisiBroker 4.x ?If you have ejb support - then yes - although you may want to wait for
a future 6.0 rolling patch to get updated IDL generation.
andy

How to integrate Oracle Http Server with Weblogic

Weblogic supports Apache web server 2.0 and 2.2 to be a proxy server. Oracle Http Server (OHS) is based on Apache 2.0. I am trying to configure Weblogic to use OHS that comes with OAS install as proxy on Linux environment. I am unable to get the WLS plugin for Apache to work with OHS. When I tried to start the OHS, I got the following errors:
/oracle/product/10.1.3.1/OracleAS_3/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 1125 of /oracle/product/10.1.3.1/OracleAS_3/Apache/Apache/conf/httpd.conf:
Cannot load /oracle/product/10.1.3.1/OracleAS_3/Apache/Apache/libexec/mod_wl128_20.so into server: /oracle/product/10.1.3.1/OracleAS_3/Apache/Apache/libexec/mod_wl128_20.so: undefined symbol: apr_pool_cleanup_null
I checked the library, and I found in several places, such as /usr/lib.
The following is the configuration that I put in http.conf file:
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7001
MatchExpression /AIP
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7001
DebugConfigInfo ON
PathTrim /weblogic
</Location>
Anybody knows how to fix this?
Thanks.

You're right: Weblogic supports Apache web server 2.0 and 2.2 to be a proxy server but you are using Oracle Application Server 10.1.3.1.0 which is based on Apache *1.3* as you can read in "Oracle® HTTP Server Administrator's Guide"
10g (10.1.3.1.0) - Part Number B28948-01 - 1.1 Oracle HTTP Server Features, right under "Based on Apache - HTTP v1.1 Support" at
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28948/overview.htm#i1008837.
As far as I know, the only OHS based on Apache *2.0* is available as a standalone release: "Oracle HTTP Server (Apache 2.0) (10.1.3.3.0) for Linux x86" - 32bit. You can download it from http://www.oracle.com/technology/software/products/database/oracle11g/111060_linuxsoft.html (as_101330_apache2_lnx.zip).
I've tested it successfully.
Edited by: Virgil on Jan 15, 2009 3:08 AM

Configuring Apache HTTP Server with Oracle Weblogic Server plugin

Hello friends,
I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
*************************************************log****************************************************
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431>
================New Request: [GET /images/cab.gif HTTP/1.1] =================
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
secondaryJVMID: [NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Thanks

"One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
with server 3 going down it does 1-2-1-2-1...
An example configuration (with SSL off) looks as follows:
LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
<IfModule weblogic_module>
     ConnectTimeoutSecs 10
     ConnectRetrySecs 2
     DebugConfigInfo ON
     WLSocketTimeoutSecs 2
     WLIOTimeoutSecs 300
     Idempotent ON
     FileCaching ON
     KeepAliveSecs 20
     KeepAliveEnabled ON
     DynamicServerList ON
     WLProxySSL OFF
</IfModule>
<Location /LoadTest6>
     SetHandler weblogic-handler
     WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
</Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
"the plugin sometimes redirects to the other active node"
This is somewhat strange, do you have session binding turned off?
"and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

Oracle SOA Suite 11.1.1.5 and weblogic server with OEPE

Hello
Where can I find the installers for Oracel SOA Suite 11.1.1.5 and corresponding supported weblogic server with OEPE.
I want to install this on Debian and on Oracle Solaris 10 both, so better to have generic installers.
Few months ago, i could find them (2 months ago), but not now anywhere, not even on edelievery.
Where does oracle store all older version installers?
Regards

Hi
Download wls1035_oepe111172 Generic Version from below link.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
Thanks,
--Vijay

Cold-Failover with Oracle Weblogic Server 10 R3

Hi ALL,
It is possible to configure cold-failover using Oracle Weblogic Server?/
- 2 instances with the same ip, if one fails the second will run
- Not comunication between nodes like in normal cluster
Thanks

Hello All,
Have anybody configured auto server migration for cold failover?
I have a few questions regarding this setup, any help is much appreciated.
1. for the floating ips to work, do I need 2 NICS and two cables on each server?
2. Do I have to configure 2 different ips on one interface, which will be used as node manager listen address's for each of the 2 machines?
3. What will be the listen address of each of these servers(primary server & failover server)? Is it the floating ip address? or empty (all local addresses)?
4. can we start both the primary server & failover server so when primary goes down, the failover will be quick?
Thanks,
Chandra

Oracle WebLogic Server Development Prebuilt VM: 64 bit or 32 bit?

Hi,
This is a question regarding "Oracle WebLogic Server Development" Prebuilt Virtualbox VM available for download here - http://www.oracle.com/technetwork/middleware/weblogic/downloads/weblogic-developer-vm-303434.html . Its description simply mentions that it has Oracle Linux 5.5 as the guest OS, but does not indicate what type of guest processor - 64-bit or 32-bit. Can someone who has tried it out please check this out and confirm?
Thanks!

Downloaded and got it running - it is 32-bit Linux.

Is Oracle Weblogic server 10.3 compatible with jdk 1.5.0?

When i point 1.5.0 JDK version to Oracle Weblogic server 10.3 "Bad version number in .class file" error is thrown while starting the server.
can any one help me to resolve this issue?
Edited by: user10643892 on Nov 23, 2008 10:40 PM

Hi, there.
You are right. The overview page has no clear statement on JDK. However, if you look into the supported operating system links, you'll find only JDK 6 is supported. Example for Solaris:
http://edocs.bea.com/platform/suppconfigs/configs/solaris/solaris10_103.html
Note that there is support for JDK 5 clients, which may be useful to you:
http://e-docs.bea.com/wls/docs103/notes/new.html#wp1090981
I hope this answers your question.
Cheers,
-Adrian

Oracle 11g compatibility with oracle 10g and 9i?

Hi All
I have some queries on 11g compatibility.
Is oracle 11g client compatible with oracle 10g client which is already installed on desktop?
If yes any changes to be done and where?
Is oracle 11g compatible with oracle 10g/9i on the same server where 10g/9i are installed?
Regards

Thanks Justin Thats right ...
Problem elaboration is as follows
We currently have an application which requires oracle 10g(10.2.0.3) client to connect to database from user desktops. As
part of new application development the oracle 11g clients need to be installed on all the user deskotps.
The complete application software along with oracle client 11g has to be roled out on these desktop as part of
implementaion of new application besides the existing application(The application software is packaged along with oracle
10g client).
We would like to understand if there is any software provided by oracle using which we can switch between different oracle
versions while accessing the respective applications simultaneously. Also are there any known bugs/issues in running
oracle 10g client and oracle 11g client together on the same user desktops with different oracle homes?

What do I need for Oracle Http Server with mod_plsql on Linux 64bit?

I am trying to get the OHS onto a linux box but I am not quite sure I am installing the correct thing!!
I currently have a windows box running the 10g Application server but everything seems to have changed since then and there seems to be several different things to do with the Fusion Middleware and stuff. I've tried to find an overview in plain english of what all these things are but all I can find are lots of marketing buzzwords!
All in need to to be able to run the OHS with the mod_plsql so I can run my apex application. I'd be greatfull if someone could point me in the right direction for what I need to install!
The box it is going on is a CentOS Linux 64bit machine. I've download and installed Oracle WebLogic Server 11g Rel 1 (10.3.3) using the generic installer for the 64 bit java but there seems to be no http server despite it saying there is! Most likely I am doing something wrong but the installer finishes successfully but nothing is running on port 7001.
Do I actually need the WebTier instead? Is that the best solution for running the OHS with mod_plsql? Do I need the WebLogic install as well? Unfortunately I am fairly new to Linux as well which isn't helping!!
thanks for any help
Robert

Well, you have two options:
- Use the OHS from the OFM WebTier Utilities distro. (To use 11.1.1.3 version, you need both the 11.1.1.2 and 11.1.1.3 distros)
- Use the OHS from the DB Companion Disk distro.
WebLogic Server is a Java EE application with an HTTP server included, but not intended to be used as a replacement of OHS/Apache. It doesn't support mod's...
HTH,
--olaf

Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start

I am trying to run .portal file using "Run on server" option in Workshop for weblogic.
After doing this, its trying to start the server Oracle weblogic server v10.3 at localhost and then publish my module.
Server view status shows as "State" as "Starting" and "Status" as "Synchronizing". When status reaches 82% it gets stopped there for a long time, and when 83% comes up, I can see the "State" as "Stopped" and "Status" as "Republish". And then an error window with title as "Problem Occured" and contents saying, Starting server- Oracle weblogic server v10.3 at localhost (Time of error: ...) Details >> Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start. Server did not start after 480s.
But the console tab (when I give the startup & Deployment option as "Launch Weblogic server in eclipse console) shows,
<Sep 8, 2011 6:15:03 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
e changed to STARTING> (final step alone I pasted)
Before this I can see, WLS Start mode = Development, setting Classpath ,
<Sep 8, 2011 5:56:36 PM IST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\user_projects\domains\myPortalDomain\servers\AdminServer\logs\Ad
minServer.log is opened. All server side log events will be written to this file
.>
When I checked Adminserver file its having,
<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315487671986> <BEA-160151> <Registered library Extension-Name: wlp-groupspace-app-lib, Specification-Version: 10.3, Implementation-Version: 10.3.0.1 (EAR).>
And many more similar entries...
Also there is Adminserver.logxxx file which is having,
####<Sep 8, 2011 5:33:58 PM IST> <Warning> <JDBC> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315483438048> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
####<Sep 8, 2011 5:33:58 PM IST> <Info> <JDBC> <CINTNCHEOLY0GX7> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315483438267> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.
     at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
     at com.pointbase.net.netJDBCConnection.a(Unknown Source)
     at com.pointbase.net.netJDBCConnection.<init>(Unknown Source)
     at com.pointbase.net.netJDBCDriver.getConnection(DashoA10*..:170)
     at com.pointbase.net.netJDBCDriver.connect(DashoA10*..:94)
     at com.pointbase.jdbc.jdbcUniversalDriver.getConnection(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.connect(Unknown Source)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:316)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:217)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
     at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2282)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
And many more entries like the above...
I even tried startup & Deployment option as "Start weblogic server in Expressmode" and still same error I am getting and this time instead of in eclipse console, I can see command prompt and here also showing "Server state changed to STARTING"
FYI, I created domain with runtime JRocket 1.6.0_05.
I even tried to clean build the portal project and publish using clean option. Still same problem coming :(
FYI, my system is having 1 GB RAM only and bit slow. Could this be a problem or something else? Please suggest.
Thanks in advance.
Edited by: gopikrish on Sep 8, 2011 6:20 AM

Hi Gopikrish
The root cause for your error is, it is not able to start the Pointbase database. Looks like you configured a domain with default pointbase database. In the domain\bin\ one of the starup scripts like startWeblogic.cmd, you should see some lines that start the pointbase database.
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093
Instead of starting from Workshop, go to the domain root folder and start the weblogic using the command like startWeblogic.cmd (or .sh on unix). This should start the pointbase and then start the portal domain. Portal domain does need this backend pointbase database to store all the portal meta data and has datasources configured for this.
Do you have a Clustered Portal domain, with one of the managed servers located in the remote machine. If yes, and if you use default Pointbase database, you need to change something like pointbase db should not be localhost but the name of the machine where you have the admin server running.
Either way, the issue is not able to stat the pointbase db and thus serve not starting.
Thanks
Ravi Jegga

Oracle WebLogic Server with Oracle Developer 10g

Similar Messages

Maybe you are looking for