Oracle WMS login issue

Dear All,
We found that WMS can not support different people login the mobile device with the same user name at the same time. Oracle EBS support different people login the the system with the same user name. We think this is not reasonable. If there is some configuration or if there is something work around?
Is there any notes can prove this?
Thanks,
Jackie

We found that WMS can not support different people login the mobile device with the same user name at the same time. Oracle EBS support different people login the the system with the same user name. We think this is not reasonable. If there is some configuration or if there is something work around?
Is there any notes can prove this?What is the application release?
What is the issue you have? What is the error message?
Thanks,
Hussein

Similar Messages

Oracle Support Login Issue

Is there a 'My Oracle Support' email contact for login issues?
I last logged in right before Xmas. I tried logging in last week to look at the CPU contents, and I am getting an error "Sign-In Failed - User has not been properly initialized".
The 'forgot password' link worked, and it recognizes my email address, but I still cannot login.

Well, I got an email from my company oracle support contact yesterday... we've changed CSIs!
And they just noticed I migt be having trouble logging in!
So, I've logged in and filed a tar to -- at minimum -- give a little more appropriate feedback. Even something like "Account not authorized" would've given me something to work with...
thanks for {most of} your suggestions.

Oracle apps login issue

When i login as 'apps' user and execute the following command it shows error like this
set serveroutput on
declare
message varchar(20);
begin
message := 'hi';
dbms_output.put_line(message);
end;
Error starting at line 28 in command:
declare
message varchar(20);
begin
message := 'hi';
dbms_output.put_line(message);
end;
Error report:
ORA-06550: line 5, column 13:
PLS-00302: component 'PUT_LINE' must be declared
ORA-06550: line 5, column 1:
PL/SQL: Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
This same plsql works fine in 'applsys' user.
After executed in 'applsys' user it works in 'apps' user also.
How to solve this issue.
DB Version:
VERSION
11.1.0.7.0
your prompt respond would be highly appreciated
Thanks

876943 wrote:
immediately after login into the application we are getting this message
Welcome to Sourcing! Before you can begin using this product, your profile needs to be completed. Please contact your System Administrator to correct your profile.
We are on oracle apps 11.5.10.2Please see (Supplier Users With Long Job Titles And E-Mails See An Error Message When Login Into Sourcing. [ID 1276292.1]).
Thanks,
Hussein

Login issue in OIM11g due to oim credsmap error

We have OIM 11gR2PS1 installed on unix box. We have AD connector 11.1.1.5.0 installed on it .Also,peoplesoft recon connector PSFT_ER-11.1.1.5.0 is installed
In our scenario,we have webservice code in which using recon event we are creating users in OIM environment
This is hosted on same OIM server unix box.Inside webservice code we have refred oimclient.jar file to work with OIM APIs and Recon Service class.
When i tested webservice for first time it was unable to load OIM API classes as it was unable to find oimclient.jar in classpath.
So to resolve this issue i kept oimclient.jar in location- "WL_HOME/server/lib/" and also added following entry in setDomainEnv.sh to load oimclient.jar explicitly in classpath
CLASSPATH="WL_HOME/server/lib/oimclient.jar:${CLASSPATH}"
export CLASSPATH
and made entry in system-jazn-data.xml present in DOMAIN_HOME//config/fmwconfig/ as :
<grant>
            <grantee>
                <codesource>
                    <url>file:${domain.home}/servers/oim_server1/stage/*</url>
                </codesource>
            </grantee>
            <permissions>
   <permission>
               <class>oracle.security.jps.service.credstore.CredentialAccessPermission</class>
                     <name>context=SYSTEM,mapName=oim,keyName=*</name>
                     <actions>read,write</actions>
    </permission>
            </permissions>
        </grant>
After this change, webservice was working as expected and OIM related things were working fine.
But,when we tried to run schedule task "Active Directory Group Lookup Recon" for AD, we are getting error message as :
java.lang.LinkageError: loader constraint violation: loader (instance of com/thortech/xl/dataobj/tcADPClassLoader) previously initiated loading for a different type with name "com/thortech/xl/dataaccess/tcDataProvider"
So,to resolve this AD schedule task issue,we rolled back changes made for webservice in setDomainEnv.sh and system-jazn-data.xml file
and removed explicit classpath entry line of oimclient.jar from setDomainEnv.sh
But after restrating all admin and managed servers,we are currently facing issue in logging into OIM idenity/syadmin or design console with xelsyadm credentials
we have never made any changes of password for xelsyadm account or not made any change in any authenticatorproviders in weblogic console
we tried everything form reverting all changes to original setup without webservice or peoplesoft listener implementation
removed all explicit classpath entries or grant entry for oim credsmap from system-jazn-data.xml.
But still same issue persists
Any helpful suggestion is appreciated on this ASAP.
issue logs are:
TaskFlow Registration: TaskFlowDeployerThread.registerTaskFlowWithTask - Error while setting task display, this can happen with app loading issue, trying to load for 2
<Nov 11, 2013 11:24:20 PM EST> <Warning> <oracle.soa.services.workflow.worklist> <BEA-000000> <<.> Error while setting task display, this can happen with app loading issue, trying to load for 2>
<Nov 11, 2013 11:24:24 PM EST> <Error> <XELLERATE.ACCOUNTMANAGEMENT> <BEA-000000> <Class/Method: tcDefaultDBEncryptionImpl/initKeyStore encounter some problems: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=oim,keyName=.xldatabasekey" "read")
java.security.AccessControlException: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=oim,keyName=.xldatabasekey" "read")
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:372)
at java.security.AccessController.checkPermission(AccessController.java:559)
at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:458)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:518)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:544)
at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(CsfUtil.java:643)
at oracle.security.jps.internal.credstore.ldap.LdapCredentialStore.containsCredential(LdapCredentialStore.java:214)
at oracle.iam.platform.utils.config.OIMPrivilegedExceptionAction.run(CSFCredentialProvider.java:236)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.iam.platform.utils.config.CSFCredentialProvider.getPassword(CSFCredentialProvider.java:79)
at oracle.iam.platform.utils.config.standalone.StandAloneCryptoConfig.getPassword(StandAloneCryptoConfig.java:76)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.initKeyStore(tcDefaultDBEncryptionImpl.java:67)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.getCipher(tcDefaultDBEncryptionImpl.java:96)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.encrypt(tcDefaultDBEncryptionImpl.java:193)
at com.thortech.xl.crypto.tcCryptoUtil.encrypt(tcCryptoUtil.java:118)
at com.thortech.xl.crypto.tcCryptoUtil.encrypt(tcCryptoUtil.java:275)
at oracle.iam.platform.auth.impl.Authenticator.encrypt(Authenticator.java:188)
at oracle.iam.platform.auth.impl.Authenticator.authenticateWithPassword(Authenticator.java:161)
at oracle.iam.platform.auth.impl.Authenticator.authenticate(Authenticator.java:134)
at oracle.iam.platform.auth.providers.wls.OIMAuthLoginModule.login(OIMAuthLoginModule.java:46)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.GeneratedMethodAccessor951.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:784)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:203)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:698)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:696)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:695)
at javax.security.auth.login.LoginContext.login(LoginContext.java:594)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
at sun.reflect.GeneratedMethodAccessor961.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at com.sun.proxy.$Proxy16.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at com.sun.proxy.$Proxy34.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:338)
at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:252)
at weblogic.servlet.security.ServletAuthentication.login(ServletAuthentication.java:466)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at oracle.idm.common.login.SignInBean.handleWeblogicAuthn(SignInBean.java:131)
at oracle.idm.common.login.SignInBean.doLogin(SignInBean.java:97)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
<Nov 11, 2013 11:24:24 PM EST> <Error> <OIM Authenticator> <BEA-000000> <Error encrypting password>
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at oracle.idm.common.login.SignInBean.handleWeblogicAuthn(SignInBean.java:131)
at oracle.idm.common.login.SignInBean.doLogin(SignInBean.java:97)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.GeneratedMethodAccessor951.invoke(Unknown Source)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at com.sun.proxy.$Proxy34.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:338)
at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:252)
at weblogic.servlet.security.ServletAuthentication.login(ServletAuthentication.java:466)
... 72 more

Hi All,
I have tried out option of adding authwl.conf in java argument as mentioned. But,still same issue persists. I think it will be same whether we refer authwl.conf file from OIM_ORACLE_HOME/server/config or OIM_ORACLE_HOME/designconsole/config/ location.
We havent made any changes in USR table for xelsysadm user
Even system-jazn-data.xml is intact.
Actually,when i removed following classpath entry from setDomainEnv.sh file
CLASSPATH="WL_HOME/server/lib/oimclient.jar:${CLASSPATH}"
export CLASSPATH
Its working fine and i am not facing any login issue in OIM console.Also the Active Directory connector scheduled task are running fine without giving earlier error whic is becaus of explicit classpath addition in setDomainEnv.sh.This error was
java.lang.LinkageError: loader constraint violation: loader (instance of com/thortech/xl/dataobj/tcADPClassLoader) previously initiated loading for a different type with name "com/thortech/xl/dataaccess/tcDataProvider" .
This error was arising since i have explicitly mentioned oimclient.jar again in classpath and as OIM server also will load it at OIM server startup time. So it was finding two instance of tcDataProvider and was not able to decide to refer to which one of them.
But, I have to refer oimclient.jar in my webservice code to work.If we dont add classpath entry explicitly for oimclient.jar then it will throw error..that it is unable to load OIMClient class.
Webservice is deployed in OIM serveer . Is there any other way by which i can refer oimclient class in webservice code without causing this classpath conflict issue. ?
Also.is it correctthat for first time when we load Classpath explicitly like i did in my scenario,then it will always try to refer same classpath for that jar always.
For ex: in my env i made changes in setDomainEnv.sh and modifed classpath enrty as :
CLASSPATH="${OIM_ORACLE_HOME}/server/client/oimclient.jar:${CLASSPATH}"
export CLASSPATH
but this time it will start throwin the exception as :
<Nov 11, 2013 11:24:24 PM EST> <Error> <XELLERATE.ACCOUNTMANAGEMENT> <BEA-000000> <Class/Method: tcDefaultDBEncryptionImpl/initKeyStore encounter some problems: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=oim,keyName=.xldatabasekey" "read")
java.security.AccessControlException: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=oim,keyName=.xldatabasekey" "read")
Do i need to reinstall OIM setup to resolve this issue or is there any other way to refer oimclient.jar in my webservice code deployed in OIM env ?
Please suggest.
Thanks,
RPB

Worksapce login issue

Hi
I have installed Hyperion, and i think all is ok. All services are running.
My Hyperion is installed in:
Windows 2003 SP2
Oracle 11g
But when I run EPM System diagnostic I get a problem with login in the Workspace service/login.
This is the message that I get:
FAILED SSO Availability of login http://norhyperion:45000/workspace/browse/configInfo
Error: Could not login to workspace
Recommended Action: Check if all services run. Check user name and password
If I try to login to workspace in the page http://norhyperion:45000/workspace/browse/configInfo, I cannot login with the user(admin/password).
I try to login in the shared services page with this user, and all is working.
Any ideas what went wrong in my installation?
Thank You
NomrHyperion

Hi Norm,
This what I did when I had this issue.
First check if process manager and Workspace Agents are running. If you cant start process manager, or workspace agents, try to check the Listener and Oracle DB(if you are using Oracle) services if are running, if not started. If you still cant run the services, or have login issue, then you must reconfigure the Workspace and
Run EPM System Configurator
First reconfigure:
Hyperion Foundation
- Common Settings
- Configure Database
- Deploy Application Server
When this reconfiguration finish, run EPM System Configurator again, and reconfigure the rest of Workspace and Management Architect.
In my case I reconfigure:
Calculation Manager
Performance Management Architect
Workspace
After this I restart the server.
Then back to the first check again... check if Process Manager and Workspace Agents are running. If not:
Check the Listener and Oracle DB(if you are using Oracle) services if are running, if not started
Then try to start the Process Manager service(you can also try to start the Workspace agents in the menu. Windows -> Start Menu -> Oracle EPM System -> Workspace - > Start Workspace Agent Services
Try all this, then start the EPM System Diagnostic again and check if all services are ok(some times Essbase Studio is not started, start it on the menu -> Essbase Studio - Start server).
This is what I did to fix my problem, and fix all the problems Now all services and EPM are running.
Hope this can help you
JailBreak
IT Network Manager
If helpful Please award points
Thank You

Login issues with Mobile Theme 50

Hi All,
I have an APEX 4.2 application (Mobile Theme 50) which is running on Oracle 10g and is being accessed via iPads. Whenever you exit out of the application by clicking on the iPad button and go into any other App, Mail, Calendar etc, you are forced back to the login page, rather than allowing the user to continue from where they were . We have other APEX applications using a desktop theme that will happily let you check your mail and when you swap back to Safari your session is still there and you can continue on from the page you were on when you left.
Authentication is a requirement, but I was hoping that once they login and the session hasn't timed out, that they would be free to move about the iPad without having to login again.
Are there any setting or changes that can be made to change this behaviour?
Cheers
Mike

Hello,
Hi Mahmoud, sorry I haven't had time to build a sample app, I might be able to knock up a sample this evening.
This appears to be an iPad specif problem. Tested it on a Samsung and it is fine. There is also one other subtle difference on the iPad itself, that is when you save the URL as a bookmark it always opens within Safari so you can open other apps, then go back into the apex app within Safari and your session is happily running. If you save the URL to the Home screen it opens in a full screen mode (with no minimise options) and you cannot jump out of it unless you are ready to login again.
After a bit more Googling I found that in the default Page Template for Theme 50 it has the following Meta Tag in the Header.
<meta name="apple-mobile-web-app-capable" content="yes" />
From what I can gather this will default the application to run in full screen mode.
I made a copy of the page template and removed this tag and it now always runs within Safari. (After removing the link from the iPad home screen and creating a new one....Some odd cache problems seem to happen)
It would be good to have the full screen mode running as it looks neater and obviouly gives you a bit more screen real estate, but removing the meta tags appears to solve the constant login issues....Our users can decide which they prefer.
Cheers
Mike

ADF Application and Oracle Portal Login Page

We have developed ADF application and deployed it in Oracle AS 10.1.2 along with the custom JAAS module, which is working fine with the application custom login page. As a next page, I want to use Oracle Portal login page for the authentication and authorization.
How can I accomplished it? Any idea?
Thanks,
AP

Shay,
1. I created blank ADF project
2. I copied myreport.jsp file (this one was generated by Oracle Report Builder) under ..ViewController/public_html directory
3. Created directory 'lib' under ViewController/public_html/WEB-INF/lib
4. Copied reports_tld.jar file under the directory created in 3.
5. Created simple jspx page with the af:link (btw af:goLink does not exists in JDev 12c), set 'destination' to myreport.jsp
After the steps above I could not even compile the application, many problems too many to list here, Basically JDev is trying to build the project with .jsp file generated in Report Builder and is unable to.
So to be sure we are on the same page: I am trying to embed JSP report files generated by Report Builder into ADF project, then create EAR file and deploy on standalone WLS. Finally execute JSP web only report.

Need help in understanding Oracle WMS

Hi,
We are planning to implement Oracle WMS in our company. Currently we are using High Jump software for all our warehouses. Some of the warehouse functions as Cross Dock or some as Storage. Can some body give me some inputs for the following so that i can prepare a doc and present it to my upper management.
1. Some articles/training material which talks about complete functionalities in Oracle WMS( I would like to know more about Warehousing, Yard management and Customer Reporting)
2. Is there any document which talks about the advantages of Oracle WMS over HighJump WMS? (I did search in web for 2-3 days but couldn't find much info)
It would be really help if anybody help me to find outmore info on Oracle WMS.
Thanks everyone.

Hi,
If you are still looking for information and have a CSI for My Oracle Support, you might consider posting your question to the Logistics Community which is a venue for current customers to discuss WMS:
https://communities.oracle.com/portal/server.pt/community/logistics/264
Best regards,
Catherine
Logistics Community Manager

Ovi Download and Login Issue

"Ovi Download and Login Issue" i have nokia 5530xm, I am unable to login through ovi app it says sign in failed check your username and password. And when i browse the web it logs in but when itry to download it take back to main page. Please light on this issue. Thanks for help.
If you like my post or think it was useful then please hit the star button. Thanks :-)

now whenever i plug in my ipod to sync i get an offer to download and install or just download a something for itunes that i am not quite sure what it is.
hmmm. can you post a screenshot of the box containing the offer?
there's instructions on how to do that in the following user tip:
hudgie: Taking screenshots to help with problems

Oracle 11g - Date Issue?

Oracle 11g - Date Issue?
=====================
I hope this is the right forum for this issue, if not let me, where to go.
We are using Oracle 11g (11.2.0.1.0) on (Platform : solaris[tm] oe (64-bit)), Sql Developer 3.0.04.
Our NLS_DATE_FORMAT = 'DD-MON-RR'
Using 'RR' in the format forces two-digit years less than or equal to 49 to be interpreted as years in the 21st century (2000–2049), and years 50 and over, as years in the 20th century (1950–1999). Setting the RR format as the default for all two-digit year entries allows you to become year-2000 compliant. For example:
We have a date '01-JUN-31' in our source system. It treat this date as 01-JUN-2031' instead of '01-JUN-1931'. One century forward.
Do we able to resolve using NLS_DATE_FORMAT change?
How do we resolve this issue?
Thanks in helping.

qwe16235 wrote:
Our source is Oracle data base, where S_date is defined as DATE. Why did you say STRING , when it defined as DATE data type?I doubt you source is an Oracle database. You may have it stored in an Oracle database, but it cam form somewhere else, and was very likely inserted into the table as a string, wherever it came from. Given a string that resembles a date, Oracle will try to convert it to a date using the nls_date_format parameter for the session (which can either be set in the session or inherited form the database). Perhaps this will help explain:
SQL> create table t (conv_type varchar2(10), dt date);
Table created.
SQL> alter session set nls_date_format = 'dd-mon-rr';
Session altered.
SQL> insert into t values ('Implicit', '01-jun-31');
1 row created.
SQL> insert into t values ('Explicit', to_date('01-jun-1931', 'dd-mon-yyyy'));
1 row created.
SQL> commit;
Commit complete.
SQL> select conv_type, to_char(dt, 'dd-mon-yyyy') dt
2 from t;
CONV_TYPE DT
Implicit 01-jun-2031
Explicit 01-jun-1931So, unless you are really inserting dates, not strings that look like dates, you are going to have problems.
John

Pl-Sql Oracle Function Concurrency Issue

Hi All,
Issue - pl-sql Oracle Function performance issue, when muliple users are accessing the function
Detail -
Oracle 11g / Linux Server
I have developed a pl-sql oracle function to retrieve information from 3 tables, output as a particluar type array.
Single request is getting processed within 2.2 seconds, but when multiple request are sent concurrently <tested with 50>, time taken for each output is different.
BreakUp of Response times:-
8 messages took - 2.2 sec
+8 messages took - 4.4 sec
++8 messages took - 6.6 sec....etc
I'm looking for any DB tunning parameter, which will help to resolve this issue.
My only aim is to expose developed function to multiple users, who all can access it concurrently, but response should limit within 2.2 seconds.
Any thoughts + guidance is higly appreciated.
Thanks
Preetam Singh

Supporting data insert statements:
=======================================================================================================================
REM INSERTING into EXPERTISE
Insert into EXPERTISE (USH_USER_NAME,USH_SKILL_SET1,USH_SKILL_SET2,USH_SKILL_SET3,USH_SKILL_SET4,USH_SKILL_SET5,USH_SKILL_SET6,USH_SKILL_SET7,USH_SKILL_SET8,USH_SKILL_SET9,USH_SKILL_SET10,USH_SKILL_SET11,USH_SKILL_SET12,USH_SKILL_SET13,USH_SKILL_SET14,USH_SKILL_SET15,USH_SKILL_SET16,USH_SKILL_SET17,USH_SKILL_SET18,USH_SKILL_SET19,USH_SKILL_SET20) values ('A','ENGLISH','FRENCH','HINDI',null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into EXPERTISE (USH_USER_NAME,USH_SKILL_SET1,USH_SKILL_SET2,USH_SKILL_SET3,USH_SKILL_SET4,USH_SKILL_SET5,USH_SKILL_SET6,USH_SKILL_SET7,USH_SKILL_SET8,USH_SKILL_SET9,USH_SKILL_SET10,USH_SKILL_SET11,USH_SKILL_SET12,USH_SKILL_SET13,USH_SKILL_SET14,USH_SKILL_SET15,USH_SKILL_SET16,USH_SKILL_SET17,USH_SKILL_SET18,USH_SKILL_SET19,USH_SKILL_SET20) values ('B',null,'GERMAN','CHINIESE','HINDI',null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into EXPERTISE (USH_USER_NAME,USH_SKILL_SET1,USH_SKILL_SET2,USH_SKILL_SET3,USH_SKILL_SET4,USH_SKILL_SET5,USH_SKILL_SET6,USH_SKILL_SET7,USH_SKILL_SET8,USH_SKILL_SET9,USH_SKILL_SET10,USH_SKILL_SET11,USH_SKILL_SET12,USH_SKILL_SET13,USH_SKILL_SET14,USH_SKILL_SET15,USH_SKILL_SET16,USH_SKILL_SET17,USH_SKILL_SET18,USH_SKILL_SET19,USH_SKILL_SET20) values ('C','ENGLISH',null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null);
=======================================================================================================================
==================================================================
REM INSERTING into WORKING
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('A','MON','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('A','TUE','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('A','WED',null,null);
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('A','THU','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('A','FRI','09:00','12:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('B','MON','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('B','TUE','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('B','WED','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('B','THU','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('B','FRI','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('C','MON',null,null);
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('C','TUE','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('C','WED','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('C','THU','09:00','18:00');
Insert into WORKING (NAME,WEEKDAY,DAYSTARTTIME,DAYENDTIME) values ('C','FRI','09:00','12:00');
==================================================================
=====================================================================================================================
REM INSERTING into SCHEDULE
Insert into SCHEDULE (APPOINTMENTDATE,APPOINTMENTSTART,APPOINTMENTEND,STATUS,NAME) values (to_timestamp('11-FEB-12 10.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-FEB-12 10.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-FEB-12 11.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),'MEETING','A');
Insert into SCHEDULE (APPOINTMENTDATE,APPOINTMENTSTART,APPOINTMENTEND,STATUS,NAME) values (to_timestamp('11-FEB-12 10.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-FEB-12 10.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-FEB-12 11.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),'TRAINING','B');
Insert into SCHEDULE (APPOINTMENTDATE,APPOINTMENTSTART,APPOINTMENTEND,STATUS,NAME) values (to_timestamp('13-FEB-12 10.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-FEB-12 10.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-FEB-12 11.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),'MEETING','A');
Insert into SCHEDULE (APPOINTMENTDATE,APPOINTMENTSTART,APPOINTMENTEND,STATUS,NAME) values (to_timestamp('11-FEB-12 10.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-FEB-12 11.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-FEB-12 11.30.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),'MEETING','B');
=====================================================================================================================
Edited by: 910614 on Feb 10, 2012 9:29 AM

APPLICATION LOGIN ISSUE

We installed Vision on WINDOWS. IT was working fine but not sure what has changed...recently we see login issues...
When we bounce the system it works fine i can login using SYSADMIN (but any report i submit errors out).
When i go to othe PC and login as different user it works fine and can submit the report they run BUT can NOT see the out/log.
After some time if anyone tries to connect (put the login id and password) it just hangs there forever....
just crazy.... not sure what to do...really appreciate any help on this.
Thanks...Raj

When we bounce the system it works fine i can login using SYSADMIN (but any report i submit errors out).
When i go to othe PC and login as different user it works fine and can submit the report they run BUT can NOT see the out/log.Check the status of the CM and the application listener, are they up and running?
After some time if anyone tries to connect (put the login id and password) it just hangs there foreverAny errors in the alert_<SID>.log file? Any errors in Apache log files?

AD users login issue.

Hi All,
We are getting login issue on our UAT server. AD users are not able to login into share point,it again prompting login box after entering correct username and password.
When we add that user to local admin group then it works.

May be you are try it on same sharepoint machine. If you try some other machine it will work fine. You need to create a registry key for that. This is a known issue with sharepoint
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
DWORD DisableLoopbackCheck
Value. 1
http://support.microsoft.com/kb/896861

Login Issues: Win7, Skype 6.14

Hi
I've had login issues since just after I accepted a windows update last night. (no idea if that's just a coincidence?)
I've read thru several other posts here, tried re-installing skype several times (also re-installed an older version), checked compatability mode and still no joy. oh, I rebooted a few times too.
I'm trying to login using my skype username and password (I don't have a ms account) but the screen is just stuck there, it says signing in and the whirly thing (techy term lol) is just whirling round and round.
I luuuurv my skype, absolutely essential for me as I work from home, so I hope someone can help. Pleeeease
thanks
Solved!
Go to Solution.

ah, surprise, still no joy.
downloaded trillian too but that won't let me create an acount and just supplies error messages with no explanation to enable me to correct whatever the (well hidden) error is.
just think, i could be working in a cubicle instead of this high stress work from home life!
if skype access is my biggest stress i'm pretty sure I'm still happy doing what i do lol
added bonus - i'm often on the phone 3-4 hours a day so with no skype it's got very quiet here lol
(can ya tell i'm bored though with no one on skype to talk to? lol)

DRM login issue

Hi Experts,
I installed Hyperion DRM 11.1.2.1 in Windows 2008 server.
Created the DRM Schema and the objects using the generated scripts.
I have entered the repository admin ID(DRM_DB in my case) and password and saved the configuration.
Test connection is successful.
I can start and stop the application.
I can also open the URL: http://localhost/drm-web-client/Logon.aspx.
But when I am entering the admin ID and password, it is saying DRM-61025:unable to create user session. Reason: Login failed. Invalid username or password.
Please help if you have faced this problem. Let me know if you need more information.
Thanks,
NS

Hi,
DRM user login issue
Please go through the above URL and the solution, hope it will solve the issue.
Thanks

Oracle WMS login issue

Similar Messages

Maybe you are looking for