Oracle Work Flow Mailer configuration to use O365 mailbox

Our mailboxes are now in O365 and we would now like to configure our Oracle 11g to use work flow mailer with Office 365 mailbox configuration. There has to be someone that has done this successfully that can share your configuration. Have not had too much
luck with support calls on both ends. I only found one other post in the Office 365 community and it did not give me enough info. to move forward.
We use the SMTP of the oracle server but the IMAP configuration using outlook.office365.com for incoming on port 993 has not been successful.  Anyone have any ideas or has done this successfully that can share?  Do we need SSL certificate configuration
on the Oracle side?

Hi,
Since this issue is more related to Office 365, I'd recommend you post your question in the Office 365 Community forum:
http://community.office365.com/en-us/default.aspx
The reason why we recommend posting appropriately is you will get the most
qualifiedpool of respondents,
and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • Work flow mailer become inactive each system bounce

    Dears ,
    RDBMS : 10.2.0.3.0
    Oracle Applications : 12.0.4
    i have a prblem with my work flow mailer,it becomes in active each time i restart the APPS,
    it start this way:
    1-i stopped the work flow mailer for more than 3 months,
    2-table WF_NOTIFICATIONS contain 400000 record in Mail status
    3-so to avoid sending the pending emails in the Outbound Queue to the employees.
    4-i used this action plan (from note736508.1);
    update WF_NOTIFICATIONS set mail_status = 'SENT' where mail_status = 'MAIL' ;
    sqlplus usr/passwd@db @wfntfqup APPSusr APPSpw FNDusr
    and then the problem appear?
    can any one help?
    or any notes may be?
    Thanks in advace.
    Regards,
    Omar

    Hi Omar,
    You can refer the following ML doc,may be this could be of any help
    [How To Automatically Restart the Workflow Mailer Processes Regularly|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443643.1]
    [What are the exact meaning for Workflow Notification Mailer startup modes Automatic, Manual and On Demand .?|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=845478.1]
    Thanks,
    Anchorage :)

  • Solution Manager : CHARM Work Flow - Mail sending

    Hi All,
    Can you please help me in CharM work flow - Mail sending?
    I have created a Action definition say "Z_SEND_MAIL_TO CHANGE_MANAGER : Sending Mail to Change Manger " and given process type as Smart Forms Mail.
    My Concern is in Condition Configuration.
    I want to give the start confition for Z_SEND_MAIL_TO CHANGE_MANAGER action as
    E0005ZDHFHEAD or E0004ZDHFHEAD or E0001ZDHFHEAD.
    How do I give more than once condition ata time for an action.
    Regards,
    SK

    Hi Team,
    Looking for the details as earliest. Thanks in advance.
    Regards,
    SK

  • Cc in work flow mail  is required..

    Hi,
       cc in work flow mail  is required.Please help me..
    Balaji.T

    In the function module SO_NEW_DOCUMENT_SEND_API1 if you see the table parameter RECEIVERS you have field COPY, you can mark it as 'X' for the user who should be copied to. Now since user can belong to any of the following categories. If you are using SAP inbox then use the first category.
    SAP user name of the recipient
    SAPoffice name of the recipient
    Shared distribution list
    Fax number in the form of structure SADRFD
    Internet address in the form of structure SADRUD
    Remote SAP name in the form of structure SADR7D
    X.400 address in the form of structure SADR8D
    You can directly invoke the function module whenever you want to send an eamil. I hope this answers your question.
    Regards,
    Kartik Nayak
    Message was edited by:
            KARTIK Nayak

  • Work flow mails are not coming to inbox but coming to out box in quality

    Hello,
    We are working on the implementation of Work flow for Purchase orders.
    Work flow customization is completed and even work flow is triggering when ever I create Purchase Order.
    Even Agent assignment also completed for work flow tasks via T code PTFC_CHG.
    This work flow is working fine in development.
    When I moved this workflow to quality I got a problem.
    Problem here is Work flow mails are not processing out of SAP Outbox to approvers  inbox even also after executing the program RSWUWFML2.
    When I triggered the PO in development the work item is moved to SAP out box as well as inbox. In quality It is not coming to SAP inbox.
    If I check in SOST,I will not see any of the entries related to work flow mails.
    Only above I can see in my SAP Outbox.
    So how can I Process these messages to approvers SAP Inbox.
    Any body please help me where the problem is
    With regards,
    Sudhakar

    Hi SP,
    I may be wrong, but on reading ur thread, I feel u r mis interpreting SAP Outbox with Outlook.
    Is it so, because u have mentioned about RSWUWFML2 and SOST, which comes into picture only if u r using an external mail like Outlook.
    If its Outlook, then there is no doubt that ur work item would get deleted from SAP Inbox and would be present only in Outlook.
    If its SAP Outbox, then u r not supposed to get ur work item in ur Outbox unless it is processed or executed thru ur SAP Inbox.
    Hope it helps.
    Aditya
    Edited by: Aditya Varrier on May 23, 2008 1:52 PM

  • Work flow mails not processing from SAP Outbox to Approvers

    Hello,
    We are working on the implementation of Work flow for Purchase orders.
    Work flow customization is completed and even work flow is triggering when ever I create Purchase Order.
    Even Agent assignment also completed for work flow tasks via T code PTFC_CHG.
    Problem here is Work flow mails are not processing out of SAP Outbox to approvers even also after executing the program RSWUWFML2.
    If I check in SOST,I will not see any of the entries related to work flow mails.
    For eg:If I creates a Purchase order it will trigger Release Strategy and I can see the message to Approvers,like "Please Approver PO..."
    Only above I can see in my SAP Outbox.
    So how can I Process these messages to approvers SAP Inbox.
    Any Pre Setting I have to do?
    With regards,
    SPK

    Hi SP,
    I may be wrong, but on reading ur thread, I feel u r mis interpreting SAP Outbox with Outlook.
    Is it so, because u have mentioned about RSWUWFML2 and SOST, which comes into picture only if u r using an external mail like Outlook.
    If its Outlook, then there is no doubt that ur work item would get deleted from SAP Inbox and would be present only in Outlook.
    If its SAP Outbox, then u r not supposed to get ur work item in ur Outbox unless it is processed or executed thru ur SAP Inbox.
    Hope it helps.
    Aditya
    Edited by: Aditya Varrier on May 23, 2008 1:52 PM

  • Toad Error after installed Oracle Work Flow Builder

    Hi,
    I have using Toad 9.6.1 version. I installed newliy Oracle Work Flow Bulider 10g. After installed when i trying to open Toad it is giving Access Vioalation Error.
    Please advice what may be the reason and how to correct it.
    Thanks

    Hi,
    Did you use exsisiting oracle_home while installing workflow builder? if yes then may be reinstallation of toad is the soluiton.
    Is toad throwing error at startup or when you fire any query? and what is complete error message...
    Thanks,
    JD

  • Oracle workflow notification mailer configuration error

    hi,
    i am trying to setup oracle wf notification mailer and trying to put a test email address so that all the emails go to that email address.
    but getting following message,
    FAILURE: javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.MessagingException: 530 5.7.0 Must issue a STARTTLS command first. p5sm5221427pbd.12
    my env:
    Oracle R12 on Oracle Linux 5.5
    smtp server: smtp.gmail.com
    imap server: imap.gmail.com
    outgoing and incoming: SSL enabled
    my sendmail in Oracle linux 5.5 works fine and using that i am able to sent email address to outside world.
    please advice on the above error that i am getting in notificaiton mailer configuration screen.
    thanks,

    this is the latest log file for recreating the repos,
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-migrate' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateFromDBControl' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateToCentralAgent' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateFromCentralAgent' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateToDBControl' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-config' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'UPDATE_EMAIL' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'dbcontrol' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'db' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'create' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'drop' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: ORACLE_HOME value: /u01/oracle/VIS/db/tech_st/11.1.0
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
    CONFIG: isCRSInstalled: false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: EM_HOME value: /u01/oracle/VIS/db/tech_st/11.1.0
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SID value: VIS
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
    CONFIG: isCRSInstalled: false
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter SYS_PWD.
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user:
    Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Jun 14, 2011 10:48:02 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: PORT value: 1528
    Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter SYS_PWD.
    Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:07 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: DBSNMP
    Jun 14, 2011 10:48:07 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:20 AM oracle.sysman.emcp.ParamsManager setParam
    Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: MAIL_SERVER_NAME value: smtp.gmail.com
    Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: CONFIRMATION ANSWER value:
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: CONFIRMATION ANSWER value: yes
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter LOG_FILE.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.EMConfig addEMCALogFile
    CONFIG: ORACLE_BASE :/u01/oracle/VIS/db/tech_st/11.1.0
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /u01/oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/emca/VIS/emca_2011_06_14_10_47_51.log.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
    CONFIG: isCRSInstalled: false
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'CHECK_CONFIG' set to true
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: DBSNMP
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbid
    CONFIG: No dbid available. Will query db to extract it.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBID value: 305783605
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'db' set to true
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.EMDBPreConfig invoke
    CONFIG: Passed repository configuration check
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
    CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter PORTS_FILE.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil getAllOracleHomeLoc
    CONFIG: /etc/oraInst.loc and /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc are not the same. Getting list of homes from /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Homes to scan for used ports: [u01/oracle/VIS/apps/tech_st/10.1.3, /u01/oracle/VIS/apps/tech_st/10.1.2, /u01/oracle/VIS/db/tech_st/11.1.0]
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/apps/tech_st/10.1.3
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil getProperties
    CONFIG: Error reading file /u01/oracle/VIS/apps/tech_st/10.1.3/sysman/config/emd.properties
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getAgentPort
    CONFIG: Cannot parse EMD_URL correctly. No port identified
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: null from /u01/oracle/VIS/apps/tech_st/10.1.3/sysman/config/emd.properties
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Cannnot parse EMD_URL correctly. No port identified
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/apps/tech_st/10.1.2
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: 1157 from /u01/oracle/VIS/apps/tech_st/10.1.2/sysman/config/emd.properties
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/db/tech_st/11.1.0
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking JMS port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking RMI port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking HTTP port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getAgentPort
    CONFIG: Cannot parse EMD_URL correctly. No port identified
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: null from /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Cannnot parse EMD_URL correctly. No port identified
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil getProperties
    CONFIG: Error reading file /u01/oracle/VIS/db/tech_st/11.1.0/install/staticports.ini
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getFreePorts
    CONFIG: /u01/oracle/VIS/db/tech_st/11.1.0:localhost.localdomain:null:VIS:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: AGENT_PORT_VIS value: 3938
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBCONTROL_HTTP_PORT_VIS value: 1158
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: JMS_PORT_VIS value: 5540
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: RMI_PORT_VIS value: 5520
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.EMDBPreConfig getFreePorts
    CONFIG: Ports assigned for SID: VIS : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
    CONFIG: File: /u01/oracle/VIS/db/tech_st/11.1.0/localhost.localdomain_VIS/sysman/emd/agntstmp.txt:localhost.localdomain does not exists.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
    CONFIG: ORA-12541: TNS:no listener
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12541: TNS:no listener
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2682)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:193)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
         at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
         at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
         at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
    Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
    Refer to the log file at /u01/oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/emca/VIS/emca_2011_06_14_10_47_51.log for more details.
    Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2689)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:193)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
         at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
         at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
         at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)

  • Work Flow Manger Configuration Wizard

    Hi,
    Im getting an error while configuring Work Flow Manager, Snap shot of an issue has been attached and also error log has been mentioned below.
    [Error] [12/5/2014 5:09:21 PM]: System.Management.Automation.CmdletInvocationException: The token provider was unable to provide a security token while accessing 'https://<ServerName>:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned
    message: '<HEAD><TITLE>Tunnel or SSL Forbidden</TITLE></HEAD>
    <BODY BGCOLOR="white" FGCOLOR="black"><H1>Tunnel or SSL Forbidden</H1><HR>
    <FONT FACE="Helvetica,Arial"><B>
    Description: 9355 is not an allowed port for Tunnel or SSL connections</B></FONT>
    <HR>
    <!-- default "Tunnel or SSL Forbidden" response (403) -->
    </BODY>
    Please kindly suggest for the above issue.
    Thanks in advance
    Suman

    While using the configuration wizard, did you tick the checkbox to open the FW Ports automatically for all the default ports mentioned in the configuration wizard. And it is worth checking that those default ports mentioned in configuration wizard are not
    in use. You can verify this in FW Settings of the server.
    Also make sure that setup account is the administrator on the server.
    -Prashant

  • Oracle Work flow/e-Biz Events

    Hi All,
    Need some info regarding Oracle Workflow and E-Business Suite R12 events.
    We have defined a business event in a E-Biz R12 and its subscription is of type ‘Launch Work Flow’ to launch a node(activity) of the work-flow. This activity is not the start node(activity) of the wf. Name of the activity is ‘Receive data’
    ‘Receive data’ is defined as an ‘receive-event’ type of activity. We’ll invoke the workflow from back-end, it will halt at the ‘Receive data’. When e-Biz event is raised, workflow will be resumed.
    We’ll be running different instances of work-flow. So, how do I inform e-Biz event to resume a particular instance of work flow?
    My assumption is:
    Work-flow (wf) instances are distinguish based on item-key while e-Biz event takes event-key as an input parameter when it is raised. E-Biz event will match the event-key with item-key of workflow and resume the correct instance of wf. Is it correct?
    All pointers are appreciated.
    Thanks,
    MK
    Edited by: MK on Apr 12, 2012 11:18 PM

    So to do this:
    1. Create an activity in the WF process so that it is a event-receiving activity and specify the event name that will make it resume
    2. Define the event and subscription in BES Studio. Create a subscription for the event so that it resumes/starts a workflow process
    3. Raise the business event by specifying its EVENT_KEY as the WF process item type
    When the BES gets the event it will identify the item type from the event subscription and will look for an activity waiting for an event and will resume that activity if the process item key corresponds to the event EVENT_KEY.
    Regards

  • Work flow & SRM configuration step by step guide

    Hello All....
    Please send me the Work flow DOcumnetation related to SRM/EBP
    Thanks in Advance and points rewarded.
    Arshad

    Hi Pravin,
    Can you please send me the config. Documents to me on my mail id.
    [email protected]
    Thank you in advance.
    Best Regards,
    Mahesh.

  • Work flow mail

    how to send mail for multiple user  in workflow?

    Hi,
       If your qurey is still unanswered, there are many ways to achieve that.
    one way of doing that is to create a multiline workflow container element and use it in the send mail step of the workflow.
    hope this will help you.
    Regards,
    Sam

  • Oracle work flow

    Hi all,
    I have a question about workflow, will therte be any settings in workflow which sends emails. Earlier in our application, when ever a request is made ,implemented or revoked we used to get emails in 5 - 10 mins.Now it's taking couple of hours.
    What couild be the reason for delay.
    As I could not find any forum for workflow, i am posting it in this forum.
    Thanks
    Raghu

    As I could not find any forum for workflow, i am posting it in this forum.
    Workflow

  • Work Flow Mail - Remove

    Hi,
    In the SAP PR / PO already approved, but the notification mail from SAP - Outlook mail display the Pending PR / PO Release.
    How stop this mails?  Pls advise.
    Thks
    Rajesh.

    Hi Rajesh,
    I think you have given wrong place send mail task in your workflow.
    After Approve/Reject Send mail task should be there, then that task subject of workitem will display in Outlook, Ex: " Your PO NO:12345678 has been Approved ".
    Thanks and Regards,
    Prabhakar Dharmala

  • Oracle Work Flows

    Hi,
    Did anybody try Oracle Workflows ?
    Thanks
    Raj

    Without understanding your requirements, it is impossible to say what the "best tool" would be. Oracle Workflow, however, comes to mind as a possibility.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

Maybe you are looking for

  • IP - Various problems with BEX Analyser - help would be nice

    Hi, we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below: 1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is

  • TS1702 Itunes says it cannot restore my magicjack to my iphone because it cannot be found, Duh!

    I updated my iphone to 6.0.1 and restored it, all my apps came back to my iphone except my majicjack phone. Itumes said that it could not be found, Duh! Where do I go from here. I went to itunes and found it, but it says that it is downloaded as of S

  • What is BIG, what is F  A   S    T  ?

    Aperture is a rather complex application and image files are getting larger. All of this can lead to slow downs and other problems. And this, in turn can lead to a bit of thrashing by folks who don't fully understand how Aperture (and Lightroom) work

  • Volume on new ipod.

    i recently sent in my ipod under the 6 months warranty, only to get one sent to me that works fine, except the volume is terribly messed up. It can be turned up a little but once you pass a certain point it stays there. the volume bar could show that

  • Tools to design of Case Report Form

    Hello, I have two questions What tools do we use to design the CRF's . Is that Adobe Designer, Adobe Framemaker>? or what r the other ones When Oracle clinical can internally design a CRF ( summing up the DCM's and DCI's) why do we need to design usi