Oracle XE 10g running on XP Professional SP2
Hi
I have installed Oracle XE 10g on XP Professional SP2. By default, it configured the port 8080 for the HTML DB.
When I do the netstat -a, I cannot see port 8080 is listening and I cannot open the HTML DB.
My oracle server is up and I can use it using SQLPlus
Can anybody tell me what proble I have, and the solution for the same?
Thanks & Regards
Manish
Hi
I want to install Oracle on this machine. In
product-specific Prerequisite checks I get:
Checking Network Configuration requirements ...
Check complete. The overall result of this check is:
Failed <<<<
Problem: The install has detected that the primary IP
address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on
systems with DHCP-assigned IP addresses; However,
before you can do this, you must configure the
Microsoft LoopBack Adapter to be the primary network
adapter on the system. See the Installation Guide
for more details on installing the software on
systems configured with DHCP.
How can I clear this error?
Regards
before you can do this, you must configure the
Microsoft LoopBack Adapter to be the primary network
http://www.google.com/search?hl=en&q=microsoft+loopback+adapter&btnG=Google+Search&meta=
or
See the Installation Guide
for more details on installing the software on
systems configured with DHCP.
Similar Messages
-
Oracle 10g on Windows XP Professional SP2
I have problem installing oracle 10 g on Windows XP Professional. When the installation goes to "Configuration Assistants", it shows three options, Oracle Net configuration Assistant, Oracle Database Configuration Assistant and iSQL *Plus Configuration Assistant. However, the status of "Oracle Net Configuration Assistant" keep showing "In progress.." for more than 6 hours. It seems the program is not responding, then I stopped the program, uninstall it and tried to install it again but the installation still stopped at "Configuration Assistants". I did the installation/uninstall 3 times already. Could anyone help and provide some solutions?
Thanks Eric Jenkinson for the reply.
I tried the link listed above and I have some troble installing the sample database. Here are some problems.
1) During the"completing database creation process" (About 85% finished), a window pops up and it said please see the following file for details.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\sample\emConfig.log
in tnhe log file I see the following in the last few lines
oracle.sysman.emcp.util.PlatformInterface serviceCommand
: Waiting for service 'OracleDBConsolesample' to fully start
: oracle.sysman.emcp.EMConfig perform
: C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\sample\emConfig.log
oracle.sysman.emcp.EMConfig perform
: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: start「database control」
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:569)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:181)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:150)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
at java.lang.Thread.run(Thread.java:534)
2) Then I tried to enter the Enterprise Manager Database control
by entering http://home:1158/em
However, the URL changed to
http://home:1158/em/console/database/instance/repDown
I opened the portlist.ini and got 1158
Enterprise Manager Console HTTP Port (sample) = 1158
(home is the PC name)
In the web page, it said the following
"Enterprise Manager is not able to connect to the database instance "
Anyone have any idea? Thank you so much. -
Oracle RAC 10g on Windows XP Professional
Hi All,
I read many articlaes that we can not install Oracle 10g RAC on Windows xp professional but the problem is I have a laptop where I am installing VMWARE with Unix O/S I can not upgrade my XP to Server edition as I do not have money o buy license.
Please help me what all files I need to change to make my XP one of the nodes os RAC 10g.Thanks for replying.
Can by downloading the kit,I will be able to install Oracle RAC?
My question was:
I have windows xp on my machine.I have vmware software also.I need to install Oracle RAC 10g on winxp and an guest opertaing system which will be linux.I want to test RAC by making 1 node on linux and one node on guest operating system winxp.
Problem is RAC can only be installed on Server edition.Can it be possible to do it on WinXP? -
Oracle Forms 10g run time problem
Hello.
I installed Oracle Dev 10g and I'm trying to use Oracle Forms.
I configured all files like this:
[steps in other post]
1. Install the Jinitiator
location: <devsuitehome>/jinit/jinit.exe
2. edit the following files:
a. <devsuitehome>/forms90/server/default.env
where you set forms90_path=add your path to your library files (*.pll)
b. <devsuitehome>/forms90/server/formsweb.cfg
where you set workingDirectory=path to your *.fmx files
3. at Forms Builder go to Edit/Preferences/Runtime
then at the Application Server URL click "Reset to Default"
4. before attempting to run your forms, run "Start OC4J Instance" first
start/programs/oracle developer suite/forms developer/start oc4j instance
After this, when I try to run the form, I don't get any error, but the browser opens and does nothing! Some times appears a small form to acces the data base, other don't, but it always stops!!
Any ideas?!?
Many thanks,
NunoMight also be worth turningon the Jinit console (you can do this from your windows Control Panel). And set the trace level to 5 (just press 5 when the jinit console appears).
Then check error messages.
Regards
Grant -
Oracle database XE 10g on Windows XP Professional SP2
I'm installing Oracle Database XE 10g on my computer but when i launch the exe I receive the message ' error reading set up inizialization file '.
help me pleasehi
can u plz describe little bit more. -
Oracle EM 10g - Running an OS Command
Hi,
While running an OS command thru oem notification rules i get the following error
Error calling c:/ws/message.bat: Timeout occurred running c:/ws/message.bat
in the alert details message.
Is there any way to solve this?Check my response to your related posting here:
Re: problem when trying to execute OS Command in Notification Method -
PLSQL 10g on Windows 7 Professional
Hi everyone,
I have installed Oracle Client 10g on Windows 7 Professional, but when I run PLSQL and type all of my user credentials my PLSQL window closes, but if I right click on the icon and choose run as administrator or run this program in compatibility mode works pretty well. Is there a way to make it work without having all these issues?Hi everyone,
I downloaded the version called Oracle 10g client from the Oracle website and I only choosed the options SQL Plus and Net Configuration Assistant to install, but after I make all the connection requirements to connect to Oracle, when I run SQL Plus Release 10.2.0.1.0 and type username and password it dissapear, but if I open SQL Plus using right click to run as administrator works fine.
I don't understand how come older versions like 8.0 works fine on Windows 7, but the newest don't. -
Oracle Xe 10g Service dies using P6 V7
Anyone can help please.....
We are using Oracle XE 10g on a Windows 2003 SP2 server with Primavera P6 V7.0 (no service packs)
All installed OK and successfully connected to the database.
Overnight, it appears that the service died. Restarting both the listener and Oracle XE services enabled us to log back in OK. However, the service still just dies at seemingly random times. When we look at services it says they both running.
This is an extract from the listener.log (host name changed to protect the innocent!)
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ip address)(PORT=8080))(Presentation=HTTP)(Session=RAW))
24-OCT-2012 10:59:26 * service_update * xe * 0
24-OCT-2012 10:59:32 * service_update * xe * 0
24-OCT-2012 10:59:38 * service_update * xe * 0
24-OCT-2012 10:59:39 * service_update * xe * 0
24-OCT-2012 10:59:45 * service_update * xe * 0
24-OCT-2012 10:59:51 * service_update * xe * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
24-OCT-2012 10:59:54 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=8080))(Presentation=HTTP)(Session=RAW))
24-OCT-2012 10:59:55 * service_update * xe * 0
24-OCT-2012 11:00:01 * service_update * xe * 0
24-OCT-2012 11:00:03 * service_update * xe * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=8080))(Presentation=HTTP)(Session=RAW))
24-OCT-2012 11:00:07 * service_died * xe * 12537
24-OCT-2012 11:00:10 * service_register * xe * 0
24-OCT-2012 11:00:12 * service_update * xe * 0
24-OCT-2012 11:00:18 * service_update * xe * 0
This is an extract from alert_xe.log
Mon Nov 12 22:13:35 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_ckpt_5856.trc:
ORA-00221: error on write to control file
ORA-00206: error in writing (block 3, # blocks 1) of control file
ORA-00202: control file: 'D:\DATA\P6\DB\ORADATA\XE\CONTROL.DBF'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Mon Nov 12 22:13:35 2012
CKPT: terminating instance due to error 221
Mon Nov 12 22:13:35 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_q001_10032.trc:
ORA-00221: error on write to control file
Mon Nov 12 22:13:35 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_pmon_7696.trc:
ORA-00221: error on write to control file
Mon Nov 12 22:13:36 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_j000_8760.trc:
ORA-00221: error on write to control file
Mon Nov 12 22:13:36 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_dbw0_7404.trc:
ORA-00221: error on write to control file
Mon Nov 12 22:13:37 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_mman_4844.trc:
ORA-00221: error on write to control file
Mon Nov 12 22:13:37 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_reco_8956.trc:
ORA-00221: error on write to control file
Mon Nov 12 22:13:37 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_smon_9532.trc:
ORA-00221: error on write to control file
Mon Nov 12 22:13:37 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_lgwr_1072.trc:
ORA-00221: error on write to control file
Mon Nov 12 22:13:38 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_psp0_6528.trc:
ORA-00221: error on write to control file
Instance terminated by CKPT, pid = 5856
Dump file d:\data\p6\db\app\oracle\admin\xe\bdump\alert_xe.log
Any help much appreciated.
Peteruser11262980 wrote:
This is an extract from alert_xe.log
Mon Nov 12 22:13:35 2012
Errors in file d:\data\p6\db\app\oracle\admin\xe\bdump\xe_ckpt_5856.trc:
ORA-00221: error on write to control file
ORA-00206: error in writing (block 3, # blocks 1) of control file
ORA-00202: control file: 'D:\DATA\P6\DB\ORADATA\XE\CONTROL.DBF'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.You have a backup or other process running that tries to access (and lock) database files while db instance is up.
Possibly solutions may include: Shutdown database during/before backup, or exclude oradata folder (the whole file tree).
Mon Nov 12 22:13:35 2012
CKPT: terminating instance due to error 221Because control file could not be written to, CKPT has no alternative but to shut down to protect the database. -
Installin Oracle 10G on Windows XP Professional Virtual running
I have a Windows 7 Professional installed on my Laptop. I am trying to install Oracle 10 G on Windows XP Professional which comes with windows 7 Professional . Installation works fine but database administration page does not appear on reboot. Please let me know how to fix it please.
c:> emctl start dbconsole
-
Oracle Database 10g Express Edition installing on win2003 SP2
We are trying to install oracleXE on W2k3 SP2 and getting failed after diplaying "Publishing product information" at final stage. Noting is prompted after this step.
Many Thanks for the response. These are the few lines. Please let me know if you wish to view the complete log. plz share you mail id, so that i can share the complete log.
Property(S): RESOURCES = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\
Property(S): DE = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\de\
Property(S): DEFAULTS = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\admin\defaults\
Property(S): DELX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\delx\
Property(S): DEMO = C:\oraclexe\app\oracle\product\10.2.0\server\demo\
Property(S): DEMO1 = C:\oraclexe\app\oracle\product\10.2.0\server\nls\demo\
Property(S): DIRPROPERTY1 = D:\
Property(S): DOC1 = C:\oraclexe\app\oracle\product\10.2.0\server\doc\
Property(S): DOC3 = C:\oraclexe\app\oracle\product\10.2.0\server\precomp\doc\
Property(S): ODP.NET1 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\
Property(S): DOC6 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\doc\
Property(S): DesktopFolder = C:\Documents and Settings\All Users\Desktop\
Property(S): ENLX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\enlx\
Property(S): ES = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\es\
Property(S): ESLX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\eslx\
Property(S): FLASH_RECOVERY_AREA = C:\oraclexe\app\oracle\flash_recovery_area\
Property(S): FR = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\fr\
Property(S): FRLX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\frlx\
Property(S): FavoritesFolder = C:\Documents and Settings\-oper-lrajesh\Favorites\
Property(S): FontsFolder = C:\WINDOWS\Fonts\
Property(S): GIFS = C:\oraclexe\app\oracle\doc\dcommon\gifs\
Property(S): GlobalAssemblyCache = D:\
Property(S): HELP = C:\oraclexe\app\oracle\product\10.2.0\server\precomp\help\
Property(S): HELP1 = C:\oraclexe\app\oracle\product\10.2.0\server\sqlplus\admin\help\
Property(S): HELP2 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\help\
Property(S): ODBC = C:\oraclexe\app\oracle\product\10.2.0\server\odbc\
Property(S): HELP3 = C:\oraclexe\app\oracle\product\10.2.0\server\odbc\help\
Property(S): HTML = C:\oraclexe\app\oracle\doc\dcommon\html\
Property(S): HTML2 = C:\oraclexe\app\oracle\product\10.2.0\server\odbc\html\
Property(S): SCHEMA1 = C:\oraclexe\app\oracle\product\10.2.0\server\demo\schema\
Property(S): HUMAN_RESOURCES = C:\oraclexe\app\oracle\product\10.2.0\server\demo\schema\human_resources\
Property(S): IMG = C:\oraclexe\app\oracle\doc\img\
Property(S): IMG_TEXT = C:\oraclexe\app\oracle\doc\img_text\
Property(S): INCLUDE = C:\oraclexe\app\oracle\product\10.2.0\server\plsql\include\
Property(S): OCI = C:\oraclexe\app\oracle\product\10.2.0\server\OCI\
Property(S): INCLUDE2 = C:\oraclexe\app\oracle\product\10.2.0\server\OCI\include\
Property(S): OLEDB = C:\oraclexe\app\oracle\product\10.2.0\server\oledb\
Property(S): INCLUDE3 = C:\oraclexe\app\oracle\product\10.2.0\server\oledb\include\
Property(S): INSTALL3 = C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\install\
Property(S): ORACLEXE = C:\oraclexe\
Property(S): ProgramFilesFolder = C:\Program Files\
Property(S): ISMyCompanyDir = C:\Program Files\My Company Name\
Property(S): ISMyProductDir = C:\Program Files\My Company Name\My Product Name\
Property(S): IT = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\it\
Property(S): ITLX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\itlx\
Property(S): LOG1 = C:\oraclexe\app\oracle\product\10.2.0\server\log\
Property(S): IWINRBB09 = C:\oraclexe\app\oracle\product\10.2.0\server\log\iwinrbb09\
Property(S): JA = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\help\ja\
Property(S): JA1 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\ja\
Property(S): JA2 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\help\ja\
Property(S): JALX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\jalx\
Property(S): JDBC = C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\
Property(S): JLIB = C:\oraclexe\app\oracle\product\10.2.0\server\jlib\
Property(S): JLIB1 = C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\jlib\
Property(S): KO = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\ko\
Property(S): KOLX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\kolx\
Property(S): LDAP = C:\oraclexe\app\oracle\product\10.2.0\server\ldap\
Property(S): LIB = C:\oraclexe\app\oracle\product\10.2.0\server\OCI\lib\
Property(S): LIB1 = C:\oraclexe\app\oracle\product\10.2.0\server\precomp\lib\
Property(S): LIB2 = C:\oraclexe\app\oracle\product\10.2.0\server\opmn\lib\
Property(S): LIB3 = C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\lib\
Property(S): LIB4 = C:\oraclexe\app\oracle\product\10.2.0\server\LIB\
Property(S): LIB5 = C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\
Property(S): LIB6 = C:\oraclexe\app\oracle\product\10.2.0\server\oledb\lib\
Property(S): LOG = C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\log\
Property(S): LOG2 = C:\oraclexe\app\oracle\product\10.2.0\server\config\log\
Property(S): LocalAppDataFolder = C:\Documents and Settings\-oper-lrajesh\Local Settings\Application Data\
Property(S): SLAX = C:\oraclexe\app\oracle\product\10.2.0\server\slax\
Property(S): MESG = C:\oraclexe\app\oracle\product\10.2.0\server\slax\mesg\
Property(S): MESG1 = C:\oraclexe\app\oracle\product\10.2.0\server\oledb\mesg\
Property(S): MESG10 = C:\oraclexe\app\oracle\product\10.2.0\server\opmn\mesg\
Property(S): MESG11 = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\mesg\
Property(S): MESG13 = C:\oraclexe\app\oracle\product\10.2.0\server\sqlplus\mesg\
Property(S): MESG15 = C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\mesg\
Property(S): MESG2 = C:\oraclexe\app\oracle\product\10.2.0\server\plsql\mesg\
Property(S): MESG3 = C:\oraclexe\app\oracle\product\10.2.0\server\nls\mesg\
Property(S): MESG4 = C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\mesg\
Property(S): MESG5 = C:\oraclexe\app\oracle\product\10.2.0\server\odbc\mesg\
Property(S): XDK = C:\oraclexe\app\oracle\product\10.2.0\server\xdk\
Property(S): MESG6 = C:\oraclexe\app\oracle\product\10.2.0\server\xdk\mesg\
Property(S): ORACORE = C:\oraclexe\app\oracle\product\10.2.0\server\oracore\
Property(S): MESG7 = C:\oraclexe\app\oracle\product\10.2.0\server\oracore\mesg\
Property(S): MESG8 = C:\oraclexe\app\oracle\product\10.2.0\server\ldap\mesg\
Property(S): MIGRATE_DIR = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\migrate\
Property(S): MSVC = C:\oraclexe\app\oracle\product\10.2.0\server\OCI\lib\MSVC\
Property(S): ORACLE_CORPORATION = C:\Program Files\Oracle Corporation\
Property(S): MY_PRODUCT_NAME = C:\Program Files\Oracle Corporation\My Product Name\
Property(S): MyPicturesFolder = C:\Documents and Settings\-oper-lrajesh\My Documents\My Pictures\
Property(S): NLLX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\nllx\
Property(S): ODE = C:\oraclexe\app\oracle\product\10.2.0\server\ODE\
Property(S): _0.2.0 = C:\oraclexe\app\oracle\product\10.2.0\
Property(S): WindowsVolume = C:\
Property(S): ORACLE_XE = C:\Program Files\Oracle Corporation\Oracle XE\
Property(S): OUI = C:\oraclexe\app\oracle\product\10.2.0\server\cfgtoollogs\oui\
Property(S): OWM = C:\oraclexe\app\oracle\product\10.2.0\server\owm\
Property(S): PRODUCT = C:\oraclexe\app\oracle\product\
Property(S): PT_BR = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\pt-BR\
Property(S): PUBLIC3 = C:\oraclexe\app\oracle\product\10.2.0\server\oramts\public\
Property(S): PUBLISHERPOLICY = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\PublisherPolicy\
Property(S): PersonalFolder = C:\Documents and Settings\-oper-lrajesh\My Documents\
Property(S): PrimaryVolumePath = D:\
Property(S): ProgramFiles64Folder = D:\
Property(S): ProgramMenuFolder = C:\Documents and Settings\All Users\Start Menu\Programs\
Property(S): SAMPLE = C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\SAMPLE\
Property(S): SAMPLE2 = C:\oraclexe\app\oracle\product\10.2.0\server\admin\sample\
Property(S): SAMPLES = C:\oraclexe\app\oracle\product\10.2.0\server\OCI\samples\
Property(S): SCRIPTS1 = C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\
Property(S): SEEDDB = C:\oraclexe\app\oracle\product\10.2.0\server\config\seeddb\
Property(S): SRVM = C:\oraclexe\app\oracle\product\10.2.0\server\srvm\
Property(S): SendToFolder = C:\Documents and Settings\-oper-lrajesh\SendTo\
Property(S): StartMenuFolder = C:\Documents and Settings\All Users\Start Menu\
Property(S): StartupFolder = C:\Documents and Settings\All Users\Start Menu\Programs\Startup\
Property(S): System16Folder = C:\WINDOWS\system\
Property(S): System64Folder = D:\
Property(S): SystemFolder = C:\WINDOWS\system32\
Property(S): SourceDir = C:\DOCUME~1\-oper-lrajesh\Local Settings\Temp\1\_is15\
Property(S): TRACE = C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\trace\
Property(S): TRACE1 = C:\oraclexe\app\oracle\product\10.2.0\server\oramts\trace\
Property(S): TRACE2 = C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\trace\
Property(S): TempFolder = C:\DOCUME~1\-oper-lrajesh\Local Settings\Temp\
Property(S): TemplateFolder = C:\Documents and Settings\All Users\Templates\
Property(S): USERPROFILE = C:\Documents and Settings\-oper-lrajesh\
Property(S): VC71 = C:\oraclexe\app\oracle\product\10.2.0\server\OCI\lib\MSVC\vc71\
Property(S): WindowsFolder = C:\WINDOWS\
Property(S): XA = C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\XA\
Property(S): XE2 = C:\oraclexe\app\oracle\flash_recovery_area\XE\
Property(S): XML = C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\xml\
Property(S): XXLX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\xxlx\
Property(S): ZHLX = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\zhlx\
Property(S): ZONEINFO = C:\oraclexe\app\oracle\product\10.2.0\server\oracore\zoneinfo\
Property(S): newfolder1 = C:\Documents and Settings\All Users\Start Menu\Programs\Oracle Database 10g Express Edition\
Property(S): newfolder2 = C:\Documents and Settings\All Users\Start Menu\Programs\Oracle Database 10g Express Edition\Get Help\
Property(S): _781042AB71DC4D58AEFDC83AFA6603C3 = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\delx\
Property(S): _7DB1B2C8944C4054BCC8C4500F37049C = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\enlx\
Property(S): _C47544281E2F4507BDADF8C3ECB1568E = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\eslx\
Property(S): _91B054F49ECC497AB485FC09F4A586A2 = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\frlx\
Property(S): _33DB7C9A5200482CB2F5310F002805A1 = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\itlx\
Property(S): _7CD34E90D6F04BC88D98DE349DFF3CFD = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\jalx\
Property(S): _4394EB4FE2AD4AC3977E96E14A074BE8 = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\kolx\
Property(S): _B93C978070284B47AB72A0BBF9AE0206 = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\nllx\
Property(S): _4CBEF1293D584608B7C996039CB10472 = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\xxlx\
Property(S): _35AF789A79614E4FB411E8DD5E191A99 = C:\oraclexe\app\oracle\product\10.2.0\server\ctx\data\zhlx\
Property(S): _125D15172A3E408AB30DF25DFACDA298 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\help\ja\
Property(S): _1D715EB43CA34692A8A7182FA7817BEC = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\de\
Property(S): _2CAB3BBCB9354C9387FC313D7A2C1EEB = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\es\
Property(S): _3904DD47B9F6426CAAC171797F64E1B3 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\fr\
Property(S): _DF56685F21CB4558BCD9A5B88ED4151E = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\it\
Property(S): _C5DE329B16584BAE9DE223D4510192D7 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\ja\
Property(S): _12900F77D1294A7EAFA13ADF5B599D1C = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\ko\
Property(S): _863AA42463B64FC2B896AE7A2D729BA1 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\pt-BR\
Property(S): _A62C1E6B40CC4EAB83EF4114BE8F5533 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\zh-CHS\
Property(S): _2AD8F73997334D64A411704F544084F7 = C:\oraclexe\app\oracle\product\10.2.0\server\ODP.NET\Resources\zh-CHT\
Property(S): ProductState = -1
Property(S): TRANSFORMSATSOURCE = 1
Property(S): TRANSFORMSSECURE = 1
Property(S): TRANSFORMS = |C:\DOCUME~1\-oper-lrajesh\Local Settings\Temp\1\_is15\1033.MST
Property(S): RecacheTransforms = C:\DOCUME~1\-oper-lrajesh\Local Settings\Temp\1\_is15\1033.MST
Property(S): PackageCode = {32D9C15A-C7C5-4D45-AAE0-B5DB53447098}
Property(S): ___________3 = ?,?????????
Property(S): ________p_3 = ?,???? %p?
Property(S): _Modify = &Modify
Property(S): ARPNOMODIFY = 1
Property(S): ARPPRODUCTICON = ARPPRODUCTICON.exe
Property(S): ARPURLINFOABOUT = http://www.oracle.com
Property(S): AvailableSpaceInDrive = 0
Property(S): Avvia__p_adesso. = Avvia %p adesso.
Property(S): Avvia__p_adesso.1 = Avvia %p adesso.
Property(S): BUILDTYPE = 87
Property(S): DWUSINTERVAL = 30
Property(S): DWUSLINK = CE9C27889E6CD79FFEACD0AF1EFB978FE98BA78FCE1CC08FCEABB7D8FE3CF788DECCE0FFD9AC
Property(S): DefaultUIFont = Tahoma8
Property(S): HOSTNAME = localhost
Property(S): ISSCRIPT_ENGINE_VERSION = 11.0.0.28844
Property(S): ISSCRIPT_VERSION_MISSING = The InstallScript engine is missing from this machine. If available, please run ISScript.msi, or contact your support personnel for further assistance.
Property(S): ISSCRIPT_VERSION_OLD = The InstallScript engine on this machine is older than the version required to run this setup. If available, please install the latest version of ISScript.msi, or contact your support personnel for further assistance.
Property(S): ISVROOT_PORT_NO = 0
Property(S): IS_COMPLUS_PROGRESSTEXT_COST = Costing COM+ application: [1]
Property(S): IS_COMPLUS_PROGRESSTEXT_INSTALL = Installing COM+ application: [1]
Property(S): IS_COMPLUS_PROGRESSTEXT_UNINSTALL = Uninstalling COM+ application: [1]
Property(S): IS_PROGMSG_XML_COSTING = Costing XML files...
Property(S): IS_PROGMSG_XML_CREATE_FILE = Creating XML file %s...
Property(S): IS_PROGMSG_XML_FILES = Performing XML file changes...
Property(S): IS_PROGMSG_XML_REMOVE_FILE = Removing XML file %s...
Property(S): IS_PROGMSG_XML_ROLLBACK_FILES = Rolling back XML file changes...
Property(S): IS_PROGMSG_XML_UPDATE_FILE = Updating XML file %s...
Property(S): IS_SQLSERVER_AUTHENTICATION = 0
Property(S): IS_SQLSERVER_USERNAME = sa
Property(S): Ja__ReadMe_Datei_jetzt_anzeigen. = Ja, ReadMe-Datei jetzt anzeigen.
Property(S): Ja__ReadMe_Datei_jetzt_anzeigen.1 = Ja, ReadMe-Datei jetzt anzeigen.
Property(S): Ja___p_jetzt_starten. = Ja, %p jetzt starten.
Property(S): Ja___p_jetzt_starten.1 = Ja, %p jetzt starten.
Property(S): MTSNOI = 1
Property(S): MTSPORTNUM = 2030
Property(S): Manufacturer = Oracle Corporation
Property(S): NLS_LANG = ENGLISH_UNITED KINGDOM.WE8MSWIN1252
Property(S): NewProperty1 = 0
Property(S): NewProperty10 = 0
Property(S): NewProperty11 = 0
Property(S): NewProperty12 = 0
Property(S): NewProperty13 = 0
Property(S): NewProperty14 = 0
Property(S): NewProperty15 = 0
Property(S): NewProperty16 = 0
Property(S): NewProperty17 = 0
Property(S): NewProperty18 = 0
Property(S): NewProperty19 = 0
Property(S): NewProperty2 = 0
Property(S): NewProperty3 = 0
Property(S): NewProperty4 = 0
Property(S): NewProperty5 = 0
Property(S): NewProperty6 = 0
Property(S): NewProperty7 = 0
Property(S): NewProperty8 = 0
Property(S): NewProperty9 = 0
Property(S): Oui__je_d_sire_lancer__p_maintenant. = Oui, je désire lancer %p maintenant.
Property(S): Oui__je_d_sire_lancer__p_maintenant.1 = Oui, je désire lancer %p maintenant.
Property(S): Oui__je_souhaite_lire_le_fichier_Lisez_moi. = Oui, je souhaite lire le fichier Lisez-moi.
Property(S): Oui__je_souhaite_lire_le_fichier_Lisez_moi.1 = Oui, je souhaite lire le fichier Lisez-moi.
Property(S): PROGMSG_IIS_CREATEAPPPOOL = Creating application pool %s
Property(S): PROGMSG_IIS_CREATEAPPPOOLS = Creating application Pools...
Property(S): PROGMSG_IIS_CREATEVROOT = Creating IIS virtual directory %s
Property(S): PROGMSG_IIS_CREATEVROOTS = Creating IIS virtual directories...
Property(S): PROGMSG_IIS_CREATEWEBSERVICEEXTENSION = Creating web service extension
Property(S): PROGMSG_IIS_CREATEWEBSERVICEEXTENSIONS = Creating web service extensions...
Property(S): PROGMSG_IIS_EXTRACT = Extracting information for IIS virtual directories...
Property(S): PROGMSG_IIS_EXTRACTDONE = Extracted information for IIS virtual directories...
Property(S): PROGMSG_IIS_EXTRACTDONEz = Extracted information for IIS virtual directories...
Property(S): PROGMSG_IIS_EXTRACTzDONE = Extracted information for IIS virtual directories...
Property(S): PROGMSG_IIS_REMOVEAPPPOOL = Removing application pool
Property(S): PROGMSG_IIS_REMOVEAPPPOOLS = Removing application pools...
Property(S): PROGMSG_IIS_REMOVESITE = Removing web site at port %d
Property(S): PROGMSG_IIS_REMOVEVROOT = Removing IIS virtual directory %s
Property(S): PROGMSG_IIS_REMOVEVROOTS = Removing IIS virtual directories...
Property(S): PROGMSG_IIS_REMOVEWEBSERVICEEXTENSION = Removing web service extension
Property(S): PROGMSG_IIS_REMOVEWEBSERVICEEXTENSIONS = Removing web service extensions...
Property(S): PROGMSG_IIS_ROLLBACKAPPPOOLS = Rolling back application pools...
Property(S): PROGMSG_IIS_ROLLBACKVROOTS = Rolling back virtual directory and web site changes...
Property(S): PROGMSG_IIS_ROLLBACKWEBSERVICEEXTENSIONS = Rolling back web service extensions...
Property(S): ProductCode = {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
Property(S): ProductName = Oracle Database 10g Express Edition
Property(S): ProductVersion = 10.2.1015
Property(S): REBOOT = Suppress
Property(S): RequiredSpaceInDrive = 0
Property(S): STANDARD_USE_SETUPEXE = This installation cannot be run by directly launching the MSI package. You must run setup.exe.
Property(S): S___deseo_consultar_el_archivo_L_ame. = Sí, deseo consultar el archivo Léame.
Property(S): S___deseo_consultar_el_archivo_L_ame.1 = Sí, deseo consultar el archivo Léame.
Property(S): S___deseo_lanzar__p_ahora. = Sí, deseo lanzar %p ahora.
Property(S): S___deseo_lanzar__p_ahora.1 = Sí, deseo lanzar %p ahora.
Property(S): SecureCustomProperties = ISALWAYSINSTALLELEVATED;ISSETUPDRIVEN;ARPSYSTEMCOMPONENT;ARPNOMODIFY;ARPNOREMOVE;INSTALLDIR
Property(S): Sim__desejo_executar_o__p_agora. = Sim, desejo executar o %p agora.
Property(S): Sim__desejo_executar_o__p_agora.1 = Sim, desejo executar o %p agora.
Property(S): Sim__quero_visualizar_o_arquivo_Leiame. = Sim, quero visualizar o arquivo Leiame.
Property(S): Sim__quero_visualizar_o_arquivo_Leiame.1 = Sim, quero visualizar o arquivo Leiame.
Property(S): Visualizza_il_file_Leggimi. = Visualizza il file Leggimi.
Property(S): Visualizza_il_file_Leggimi.1 = Visualizza il file Leggimi.
Property(S): Yes__I_want_to_launch__p_now. = Yes, I want to launch %p now.
Property(S): Yes__I_want_to_launch__p_now.1 = Yes, I want to launch %p now.
Property(S): Yes__I_want_to_launch__p_now.2 = Yes, I want to launch %p now.
Property(S): Yes__I_want_to_launch__p_now.3 = Yes, I want to launch %p now.
Property(S): Yes__I_want_to_launch__p_now.4 = Yes, I want to launch %p now.
Property(S): Yes__I_want_to_launch__p_now.5 = Yes, I want to launch %p now.
Property(S): Yes__I_want_to_view_the_ReadMe_file. = Yes, I want to view the ReadMe file.
Property(S): Yes__I_want_to_view_the_ReadMe_file.1 = Yes, I want to view the ReadMe file.
Property(S): Yes__I_want_to_view_the_ReadMe_file.2 = Yes, I want to view the ReadMe file.
Property(S): Yes__I_want_to_view_the_ReadMe_file.3 = Yes, I want to view the ReadMe file.
Property(S): Yes__I_want_to_view_the_ReadMe_file.4 = Yes, I want to view the ReadMe file.
Property(S): Yes__I_want_to_view_the_ReadMe_file.5 = Yes, I want to view the ReadMe file.
Property(S): ___ReadMe__________. = ?, ReadMe ??? ?????.
Property(S): ___ReadMe__________.1 = ?, ReadMe ??? ?????.
Property(S): ___ReadMe____________ = ???ReadMe ???????????
Property(S): ___ReadMe____________1 = ???ReadMe ???????????
Property(S): ___________ = ?,?????????
Property(S): ___________1 = ?,?????????
Property(S): ___________2 = ?,?????????
Property(S): ________p_ = ?,???? %p?
Property(S): ________p_1 = ?,???? %p?
Property(S): ________p_2 = ?,???? %p?
Property(S): ________p________ = ?????? %p ???????
Property(S): ________p________1 = ?????? %p ???????
Property(S): ________p_____________. = ?, ?? '%p'?(?) ???????.
Property(S): ________p_____________.1 = ?, ?? '%p'?(?) ???????.
Property(S): ARPINSTALLLOCATION = C:\oraclexe\
Property(S): ProductLanguage = 1033
Property(S): COMPANYNAME = KPMG
Property(S): INSTALLLEVEL = 1
Property(S): INSTALLSHIELDSETUPLANGUAGE = 1033
Property(S): ISSETUPDRIVEN = 1
Property(S): ISSETUPFILESCOMPLETED = Completed
Property(S): ISSETUP_UISEQUENCE_PROCESSED = 1
Property(S): ROOTDRIVE = D:\
Property(S): SETUPEXEDIR = C:\temp\fabric manager
Property(S): SUPPORTDIR = C:\DOCUME~1\-oper-lrajesh\Local Settings\Temp\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
Property(S): USERNAME = KPMG
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): ARPNOREMOVE = 1
Property(S): CURRENTDIRECTORY = C:\WINDOWS\system32
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 4636
Property(S): VersionDatabase = 200
Property(S): VersionMsi = 3.01
Property(S): WindowsBuild = 3790
Property(S): ServicePackLevel = 2
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): RemoteAdminTS = 1
Property(S): NetHoodFolder = C:\Documents and Settings\-oper-lrajesh\NetHood\
Property(S): PrintHoodFolder = C:\Documents and Settings\-oper-lrajesh\PrintHood\
Property(S): RecentFolder = C:\Documents and Settings\-oper-lrajesh\Recent\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 15
Property(S): PhysicalMemory = 2047
Property(S): VirtualMemory = 3152
Property(S): AdminUser = 1
Property(S): LogonUser = -oper-lrajesh
Property(S): UserSID = S-1-5-21-1965243242-631715425-1848903544-213045
Property(S): UserLanguageID = 2057
Property(S): ComputerName = UKWATAPP29
Property(S): SystemLanguageID = 2057
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): ColorBits = 16
Property(S): TTCSupport = 1
Property(S): Time = 10:45:57
Property(S): Date = 07/05/2009
Property(S): MsiNetAssemblySupport = 1.1.4322.2300
Property(S): MsiWin32AssemblySupport = 5.2.3790.3959
Property(S): RedirectedDllSupport = 2
Property(S): Privileged = 1
Property(S): DATABASE = C:\WINDOWS\Installer\3d91347.msi
Property(S): OriginalDatabase = C:\DOCUME~1\-oper-lrajesh\Local Settings\Temp\1\_is15\Oracle Database 10g Express Edition.msi
Property(S): UILevel = 2
Property(S): Preselected = 1
Property(S): ACTION = INSTALL
Property(S): ISStartupEvent = E4351944
Property(S): ff9ef67406aa11d5ab9800b0d02332eb = g
Property(S): CLEANUPUNINSTALLROLLBACK = Waiting
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): SOURCEDIR = C:\DOCUME~1\-oper-lrajesh\Local Settings\Temp\1\_is15\
Property(S): SourcedirProduct = {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
Property(S): ProductToBeRegistered = 1
MSI (s) (DC:0C) [10:45:57:884]: Note: 1: 1708
MSI (s) (DC:0C) [10:45:57:884]: Product: Oracle Database 10g Express Edition -- Installation operation failed.
MSI (s) (DC:0C) [10:45:57:884]: Attempting to delete file C:\WINDOWS\Installer\3d91348.mst
MSI (s) (DC:0C) [10:45:57:884]: Unable to delete the file. LastError = 32
MSI (s) (DC:0C) [10:45:57:900]: Cleaning up uninstalled install packages, if any exist
MSI (s) (DC:0C) [10:45:57:900]: MainEngineThread is returning 1602
MSI (s) (DC:D4) [10:45:57:916]: Destroying RemoteAPI object.
MSI (s) (DC:AC) [10:45:57:916]: Custom Action Manager thread ending.
=== Logging stopped: 07/05/2009 10:45:57 ===
MSI (c) (1C:40) [10:45:58:150]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (1C:40) [10:45:58:150]: MainEngineThread is returning 1602
=== Verbose logging stopped: 07/05/2009 10:45:58 === -
Running an exe from within Oracle WebLogic 10g R3 does not find dll
Hi,
I am facing a strange issue with Oracle WebLogic 10g R3.
I use the code as shown in Listing 1 below to run a windows based application exe (batch job) from within my web application hosted on Oracle WebLogic 10g Release 3.
Note that this code woks fine on Tomcat 6.x and OC4J (JDeveloper TP4).
The exec gets executed but the log of the exe program shows it could not load certain DLLs.
Note that these DLLs are in the same directoy as the Batch program and this directory is in the PATH.
Running through simple Java Program Successful*
When I run the same program from a java program it runs successfully. So this means some WebLogic environment does not get set properly.
Running directly BatchProg.exe rather than cmd.exe fails*
Also note that when I run the exe directly e.g. BatchProg.exe rather than through cmd.exe it gives me a error the system did not find the file specified.
CreateProcess error=2, The system cannot find the file specified with cause java.io.IOException: CreateProcess error=2, The system cannot find the file specified
Listing 1:*
String[] commandArgs = new String[|http://forums.oracle.com/forums/] { "cmd.exe", "/C", "BatchProg.exe \"param1\" \"param2\" " },null , l_workingDir)
Runtime rt = Runtime.getRuntime();
Process proc;
proc = rt.exec( commandArgs, envParams, workingDir );
ProcessIO errStream = new ProcessIO( proc.getErrorStream(), "ERROR");
ProcessIO outStream = new ProcessIO( proc.getInputStream(), "OUTPUT");
errStream.start(); // process any errors from the command
outStream.start(); // process any output from the command
System.out.println("Error=" +errStream);
System.out.println("Out" + outStream);
return (p_waitToFinish ? proc.waitFor() : this.SUCCESS);OK.
I have posted this on the WebLogic Forum.
Thanx. -
Connect to MS-SQL Server from a Oracle 10g running under Solaris
Hi,
I have the following problem. I want to access a MS-SQL server from an Oracle database (10g Enterprise licence) that is running on Solaris.
After googling a while, the following questions arise:
- Is it correct that the Oracle Transparant Gateway for the SQL Server is not available on Solaris platforms (but only on Windows)?
- Is it right, that the second possibility to solve this problem is to use an SQL-Server odbc driver for Solaris and access the SQL-Server over ODBC? And: Is this feature included in the Enterprise licence?
- If yes, which driver is good and cheap ;-)?
- Is there any other way to solve this problem?
Thanks
Aron
Message was edited by:
user583720I believe the Transparenet Gateway for SQL Server is available on Solaris. The problem is that you need a Unix based ODBC driver which you will also need to pay for.
We had this same problem and decided to run a windows based Heterogeneous Services gateway and routed through it instead of using the SQL Server transparent gateway. The Heterogenous severives gateway is NOT an add on product (as is Transparent Gateway). The drawback would be performance as I would expect the native MS SQL transparent gateway to perform better, but in our case it worked acceptably. -
Getting Error when running oracle form 10g
Hi all, i have a problem when i run oracle form 10g.
in the applet show like this :
Loading http://abc:8889/forms/java/frmwebutil.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 10.1.2.0
Loading http://abc:8889/forms/java/frmall_jinit.jar from JAR cache
Loading http://abc:8889/forms/java/jacob.jar from JAR cache
Loading http://abc:8889/forms/java/printtext.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.TextFieldItem.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.ButtonItem.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Can anybody help me how to solve this problem ?
Thanks,
IwanLoading http://abc:8889/forms/java/printtext.jar from JAR cache
This tells me you are using a 3rd party or locally developed Java Bean to perform some type of print function. Is this correct?
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.Does your printtext.jar Java Bean need to open an HTTP connection in order to print?
Have you been able to print in the past using this Java Bean? Where did you get the Java Bean?
RegisterWebUtil - Loading WebUtil Version 10.1.2.0Your form appears to be using WebUtil. Has it been successfully configured?
Honestly, you need to list the following minimum information when you post a question; it gives us all or most of the information we need to help you and it eliminates the need for us to ask for this information. Please always include:
* Forms Version (eg; 10.1.2.0.0 not 10g)
* Java Version
* Client OS version
* What you were doing when the error occured.
Craig... -
ORA-12514, 10g 2(beta) Oracle DBCA at install on winXP with sp2
Hello!
The error mesage ORA-12514 has appear during the instalation of 10g Release 2, at window "Configuration Assistant";
Oracle Net Configuration Assistant have status Succeeded, but during next tool name "Oracle database configuration assistant" at point "Create and start oracle...services' the I've received the ORA-12514 error!!
my pc name is: srvdzt43
my pc is: mydomain.prv
currently I'm logged with user "Administrator" on my pc, not on domain
i've installed Microsoft Loopback Adapter (ip= 10.10.10.10)
my ip addres and dns are entered by me, not automatically
my PC is an IBM thinkPad T43 at 512RAM, 2Gz, win XP with sp2
I post now, the console response and then, the tnsname.ora,listener.ora and sqlnet.ora:
C:\>tnsping srvdzt43
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 29-AUG-2
005 15:29:19
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=srvdzt43))(ADDRES
S=(PROTOCOL=TCP)(HOST=10.10.10.10)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=192.1
68.100.69)(PORT=1521)))
OK (0 msec)
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 29-AUG-2005 15:33
:47
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 29-AUG-2005 13:10:41
Uptime 0 days 2 hr. 23 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SRVDZT43.mydomain.prv)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 29-AUG-2005 15:35
:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
C:\>
------------sqlnet.ora--------------------------
# sqlnet.ora Network Configuration File: #C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
------------tnsnames.ora-----------------------------
# tnsnames.ora Network Configuration File: #C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
----------------listener.ora----------------------------
# listener.ora Network Configuration File: #C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = srvdzt43.mydomain.prv)(PORT = 1521))
I've select from Oracle Universal Installer the default setings (Enterprise option and orcl database name) ;
In Computer Management-> Services I have only "OracleOraDb10g_home1TNSListener"
service; The "Orcl" database services has been removed when I hit the "Abort" option (when I received ORA-12514 error);
Anyone can iluminate me with this problem?
A few months ago I've installed the 10g product version with no error!
Before I try to install 10g relese 2(beta), I read plenty of documentation about installing the new verision of 10g release 2, and I removed any trace from old 10g Oracle (directories, registry, environment variabile,etc)
The problem is that I can't install now even the old 10g version!
I've tried on another Pc (this PC, let's say "never hear before the word ORACLE" and have the same config winXP+sp2) ..and again the same ORA-12514 error appear!
Because I could install the old 10g on my T43 laptop a few mounths ago with no error, I think the only explanation is that the windows updates, which I 've upgrade my laptop in this time cause the Oracle instalation/create database services to crush!
Am I right...? what can I do? ... I realy need the ORACLE 10g to move on it, my old Oracle 9 databases, and continue my development work!
Thanks! Have a nice day!
XaMI see your tnsnames.ora does not contain an entry for service_name srvdzt43 , so EZCONNECT (or hostname) resolution is used, this is possible because service_name and hostname are the same.
There's a known problem with EZCONNECT connections, if a connect string is provided, but no password (throws ORA-12514), maybe there's something like that in the DB creation scripts.
I recommend you add a proper connect string into tnsnames.ora and try again. -
Oracle Enterprise 10g Installer Can Not Run in Suse Enterprise Server 11...
I downloaded Oracle Enterprise 10g in Suse Linux Enterprise Server 11. I followed all the pre-installation tasks.
Under database directory (/mnt/app/oracle/installfiles/database/), i did:
./runInstallerI got this message:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2010-02-23_06-55-40AM/installActions2010-02-23_06-55-40AM.log
This the log file's contents:
Using paramFile: /mnt/app/oracle/installfiles/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLin
ux-1.0, asianux-1 or asianux-2
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/Or
aInstall2010-02-23_07-01-15AM/installActions2010-02-23_07-01-15AM.log
I'm running Suse Linux on VM...
What should i do? I hope there is solution for it other than installing another linux flavor.On SUSE Linux Enterprise Server 10 and SUSE Linux Enterprise Server 11, the installation will pass the operating system prerequisite checks if you change each 10 or 11 to 9 in the /etc/SuSE-release file. Ensure that you replace the original values in the /etc/SuSE-release file after the Oracle installation is complete.
Original value: SUSE Linux Enterprise Server 11 (x86)
Changed value: SUSE Linux Enterprise Server 9 (x86)
Maybe you are looking for
-
Mountain Lion Notes Text Formatting
Hello, Does anyone know how to turn on Past and Match Style automaticlly so when you paste text from another source it DOES NOT keep the same font, color and style? I know how to manually do it however I would like make it a default option. Thanks, e
-
Problem linking to MobileMe album created in Aperture
I use multiple computers and I'm trying to sort out synchronising photo albums between them. On my main iMac I use Aperture and have created and published a number of photo albums to the gallery. I can view the albums from any machine via the Safari
-
I can't seem to figure this problem out, no matter what I put in root= of my kernel line for grub I can't get udev to work. fdisk -l: Disk /dev/hda: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders Units = cylinders of 16065
-
I can't video chat with other people.
I have a mid-2012 Macbook Pro (w/ out Retina). So when I can use Messages just fine, and chatting with people and all that, but when I try to video chat other people, the invites don't show up, and I can't send invites either.
-
I am trying to send emails to groups so that the email addresses are not visible to all the recipients. How can this be done?