Oracle XE installation problems in Windows XP
Hi all,
During installation I got following error mesage:
"Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience."
There was also request to send problem info to Microsoft.
Another problem was that I can't open XE GUI.
I got the famous "The page cannot be displayed" message.
It can't be a port problem because Apache Web-server happily used that address and port.
All help to solve these problems are welcome.
The SQLPlus problem you have reported is the #1 symptom of the DLL issue. Do a search on your machine and see if you can find a DLL called oraociei10.dll
If you do, check which directory it is in. The make sure that directory is not in your path.
Note that if this is the problem, then I do not think your install was successful, as the same problem also causes the install to fail. So this may also be why you cannot launch the home page.
Other reasons why the home page will not launch includes having a space in your Windows account user name - i.e what you logon to the machine with. This is also a known issue. The only workaround for this one is to deinstall, create a new Windows account user without a space (perhaps even oracle ?), logon as this user, and re-install.
I also have concerns about your statement that Apache uses the same port. Of course, you cannot have Apache and something else like Oracle Database XE share the same port. So if Apache was running during the install, the database port would have been moved, typically to 8081. If you had Apache shut down during the install, then the database would have been placed on port 8080 - but if Apache is now started and also listening on 808, then things are going to get ugly.
What is the URL that is being used for the Homepage, and is Apache running ?
Similar Messages
-
Oracle 8i Installation problem on Windows 2000
I had purchased a Oracle8i (MS/Windows NT CD (E-Commerce), part Number A94674-01 in the month of Jun 2000.
When I tried to install Oracle 8i personal edition of Windows 2000 ver.
The installation got completed smoothly. But after that I was not able to start my database and even Windows 2000 crashed after that. After every crash I reinstalled windows 2000 and oracle 8i but the result was same. My whole purpose of purchasing Oracle 8i on windows 2000 is getting defeated.
I would request you send me solution what to do ? Or replace my Oracle S/W. Its useless for me right now.
My M/C configuration is
Dell P-III (256 MB, 300 Mhz) with sound card.
20 GB Hard Disk of 7200 rpm.
The primary O/S is Windows 98.
The Hard disk is partitioned into no. Of logical drives.
They are like 2GB of each (C, D, E, F) and G 10 GB
C part ion has got Windows. And G has got windows 2000. There is enough space in all part ions.
I would appreciate if you can solve my problem as soon as possible.
Sincerely,
Shekhar
nullIF its a new installation remove the ORACLE key from the REGISTRY.
-
Oracle 11gR2 installation problem on Windows Server 2008 R2 datacenter
Hi
I am trying to install Oracle 11Gr2 64 bit on Windows server 2008 R2.The system configuration is "Intel Xeon, RAM 8.00 GB.
i
The installation is getting paused at the 8th step of Oracle installation.Neither i am getting any error message nor an entry is recorded in the Oracle inventory log.
It is showing a blank screen after the prerequiste checks are complete.
Request you to help me out in resolving the issue.
Thanks in advance for your cooperation.Hi Helios
Thanks for the response. The database is still not created to check in the Alert log .It is still in the phase of pre-requisite checks. I did not go with Silent installation.It is a plain single instance installation.
The installation screen is greyed out with out any message or error.
Please could you share if you have any thoughts on this. -
Oracle 8 installation problem on windows 2003 server
Hi!everyone
while installing i'm getting the message "could not delete the windows nt services". The error is coming for the service "OracleTNSListener".
any solution?...
any info whether oracle 8 support has been stopped for all platforms/specific ones ?...where do i get that info ?....
plz help..Hi!
Is there any work around to that? Basically I have to test an upgrade from 8i to 10g on a Windows Server 2003 w/ SP1. I am not sure on what platform that 8i database is running on because is at a third-party location. -
Oracle database 11g release 2 installation problem on windows 7 (64-bit)
First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges -
Lightroom 3.2 Installation Problem on Windows 7 64-bit
Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets. -
Oracle 8.1.7 installation problem on Window 2000 Professional
Hi everyone, I have a problem of intalling Oracle 8.1.7 on Window 2000 Professional. When I started to install Oracle 8.1.7 when I click install I get this error message
"Jrew has caused error in Javai.dll"
and restart the computer, I restarted again and again and the same problem occured, would you please tell me how I resolve this problem. Thanks in advance.
Mesfin
[email protected]
[email protected]Intel says there is a bug in oracle's OUI as well other swing based programs. The solution is to copy the CD to local drive and add -nojit as first parameter to JRE_MEMORY_OPTIONS e.g. JRE_MEMORY_OPTIONS="-nojit -mx32m"
This will enable OUI to run. Even after installing oracle Net80 conf. asst won't start due to same reason.
Go to HOME\admin\tools\ and edit netca.cl and netasst.cl to add same -nojit before -classpath.
Do this for every tool that gives this prob such DBA studio...
Ashish -
Oracle EBS R12 installation problem in Windows 2003
Hi,
I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
I had downloaded md5sum_windows.txt and also run this command :
md5sum --check md5sum_Windows.txt > md5sum_result.txt
In md5sum_result.txt, I am getting error for all files. Error message is as :
oraAppDB\Disk1\data\driver\Disk1.drv
: FAILED open or read
This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
Edited by: 855292 on Nov 26, 2011 1:58 AM
A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
Edited by: 855292 on Nov 26, 2011 2:00 AMI have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
For R12 (12.1.1) you need to download the following files:
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
Thanks,
Hussein -
10g R2 Client Installation Problem on Windows 2003 64 bit itanium
Hi,
When I click on the setup.exe, i am getting the following..and not getting setup screen
Using paramFile: E:\oracle_client\10g_winIA_client_102010\client\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The number of files bootstrapped for the jre is 528.
The number of files bootstrapped for the oui is 98.
what might be the problem, is this due to not having unzip software in the server.
Please help meJust check this link:
Oracle Installer crashes in Windows XP attempting to install 10g database
May be useful...
Amardeep Sidhu
http://www.amardeepsidhu.com -
ODBC: Oracle Universal Installer Crash on Windows 7 (Workaround found)
Clicking 'next' on first screen in the 10g installer makes the installer crash, showing a message 'Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle Support: "Unknown" "Unknown" "Unknown". Goal for the moment is just to install ODBC. The read me in the ODBC driver 10.2.0.2.0 .exe says: This section assumes the following: Oracle Universal Installer shipping with 10.2.0.0.0 has already been installed on your system. Presuming that 10.2.0.0.0 is referring to another ODBC installer, this exe is not available, so how to install this? Since the installer from 10g is crashing, tried older ones, without success. What is going on? Is it a windows setting somewhere? How to just simply install the Oracle ODBC? Really no problems installing any other software. Avoiding of space in pathnames does not make any difference. Selecting optionbutton 'basic installation' and 'advanced installation' in installer gui both crash when continuing with 'next' ('advanced' does not have any values in that stage).
Edited by: [email protected] on 8-jun-2010 6:36How to just simply install the Oracle ODBC?Probably what you're after is an oracle client install, no need to install a database if you just want ODBC. There is a small Express client on the XE download page, although I'm not sure if it includes ODBC drivers. The full 11g client software is at http://www.oracle.com/technology/software/products/database/oracle11g/112010_win32soft.html
There is a support note 781054.1, if you're on 64-bit hardware with some how-tos on getting to the 32 bit ODBC drivers. -
Installation problem on windows server 2008 r2 datacenter edition 64bit
hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus -
Oracle 10g Installation Problem on SUSE Linux 10
Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root 0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda10 2104376 73112 2031264 4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. ShroffHi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM -
Oracle 10g Installation Problem in HP-UX 11.31
Hi
I am installing ERP 2005 SR2 on HP-UX 11.31 OS with ORACLE database. When I am running ./RUNINSTALLER getting following error. Error Log as follows
Using paramFile: /oracle/stage/102_64/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.31
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2008-07-16_11-26-39AM/installActions2008-07-16_11-26-39AM.log
When I look into oraparam.ini file from given path found entries as follows
[Certified Versions]
#You can customise error message shown for failure through CERTIFIED_VERSION_FAILURE_MESSAGE
Solaris=5.6,5.7,5.8,5.9
Linux=redhat-2.1AS
HPUX=B.11.23
Decunix=V5.1A,V5.1
AIX=5.1.0.0
[HPUX-B.11.23-required]
#PATCHES required by JRE and Product, /usr/sbin/swlist -l patch gets list of patches on system
PATCHES=
#PACKAGES required by JRE and Product, /usr/sbin/swlist -l product gets list of packages on system
PACKAGES=
#Patch bundles required for Oracle.
#/usr/sbin/swlist -l bundle gives list of bundles.
#Each item should follow the format "bundle:version"
#ex.,GOLDBASE11i:B.11.11.0106.9,GOLDAPPS11i:B.11.11.0106.9
BUNDLE=
#Minimum swap space required by OUI, Increase it if your product installation so requires
SWAP_SPACE=250
TEMP_SPACE=250
BUNDLE_FAILURE_MESSAGE=Some patch bundles were not found on the system. Please verify if the system is at a higher bundle level.
Please let me know how to overcome this problem.
Regards
JayakarHi ,
If anyone come across this kind of errors don't try to perform any workaround which is not recommended by sap as later in post installation steps there will be errors so please go through below SAP note as it has some workarounds recommends by SAP
Note 980426 - Oracle 10.2 Software installation on new operating systems
Shanaka. -
PPStream installation problem on Windows 7
I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch -
Oracle 10g Installation issue on Windows 7
Hi,
I tried to install Oracle 10g downloaded from the below link on my laptop which runs in Windows 7.
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
The Oracle version is 10g release 2 for windows 7. I got this DB version no. for Windows 7 from this forum only. But still, I got the error message stated below and unable to install 10g.
------------------------------------------------------ Error --------------------------------------------------------------------------
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2010-10-22_07-37-48AM.log
Please press Enter to exit...
------------------------------------------------------ Error End -------------------------------------------------------------------
Could you please let me know how I can fix this issue? Or is there any other oracle 10g release/patch to fix this issue? I need to install only Oracle 10g and not 11g.
Also, I need to install Oracle Forms 10g too.
It would be great if you could guide me on installing these two softwares in my laptop.
Your help will be very much appreciated.
Thanks,
Arun
Edited by: 804404 on Oct 22, 2010 7:52 AMWelcome to the forums !
This issue has been discussed many times before. Pl use the search feature. The only versions supported in Win 7 (Professional or higher) are 10.2.0.5 and 11gR2. 10.2.0.5 is only available on My Oracle Support, while 11gR2 can be downloaded for free from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Re: Oracle for Windows 7
Re: which version of oracle works on windows 7
HTH
Srini
Maybe you are looking for
-
In the last 2 weeks I've downloaded Adobe Photoshop from this site 30 times. Every single time I when I try to extract it after it downloads I get the same error after about 20% of extracting saying some crap like my harddrive space my be full. I hav
-
Hi, I'm trying to generate and open a PDF file in a new window, but i'm having problems showing the file. My main doubt is what to return from the Action method: The button: <h:commandLink styleClass="commandLink" id="link1" target="_blank" action="#
-
Is error 502 telling me that itunes is down right now?
Is error 502 telling me that itunes is down right now?
-
Error Infoobject does not exists in Infoprovider
Hi Friends, I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the
-
When I open my e-mail messages, I get a big black box that states "More request cannot be completed. Service book information not found." Under this message is a small blue box with "OK" that I must click to remove it. Then my e-mail messages come th