Oracle XE support for XMLA

I am about to use Oracle XE as a relational database for Mondrian OLAP Server and JPivot as a front end. I managed to install the schema and samples, and everything works fine except XMLA query. I would appreciate if one gets me an insight in Oracle XE support for XMLA.

I donot have a direct answer. However, I have not seen any discussion of intrinsic support for the "XML for Analysis" web service related to any Oracle database edition. Remember that XE does not support any Enterprise Edition-only features, nor any features from STandard Edition that require Java in the database.
Have you tried the configuration against Oracle Database Enterprise or Standard Edition? If so, how successful were you?
And - you mention that everything works fine except ... perhaps you could expand on the results of the except. IOS - What is going wrong, or what error message are you receiving.

Similar Messages

Oracle adf supported for json applications

Hi can u any one help to me
Oracle adf supported for json

Hi,
create a Jersey client and generate a JavaBean data control. This is how you get JSON clients integrated assuming the JSON client is a REST service.
Frank

When did Oracle drop support for this?

Hi
I have the 9.2.0.2 Windows installation of Oracle on a test PC here. On 9.2.0.2, the CREATE TABLESPACE statement fails when specifying the TEMPORARY clause. Instead I have to use CREATE TEMPORARY TABLESPACE. The difference of course is that the latter creates a locally managed temp ts while the former creates dictionary managed temp ts.
Does anyone know the exact version at which Oracle stopped support for CREATE TABLESPACE ... TEMPORARY - i.e. dictionary managed temporary tablespaces?
Thanks
Martin

Fredrik is correct. My system tablespace is locally managed. I tried his proposed tablespace creation and it did fail "ORA-12913: Cannot create dictionary managed tablespace". So there is the answer.
Thanks to both of you for the help.
Martin.

No Oracle SSO support for POSTing data to protected resource [yet]

Hi,
I am using OHS infront of JBOSS and redirecting all requests from OHS to JBOSS after SSO Authentication.
Everything works fine except that I get 500 error when I try to post data from HTML form.
When i click on a button on a JSP page that submits page with the Form Post, the request goes to the OHS and is not getting forwarded.
OHS log shows the following
127.0.0.1 - - [11/Sep/2007:08:57:23 -0400] "POST /Sample/protected/standard.do HTTP/1.1" 500 788
Proxy_error.log shows the followin error
[Tue Sep 11 08:57:23 2007] [error] [client 127.0.0.1] [ecid: 1189515443:10.6.2.137:268:5568:74,0] \n[OSSO] E09: No Oracle SSO support for POSTing data to protected resource [yet].\n
Any idea?
Thanks
Srikar.

This error does no occur in our dev or test environments, only production. A workaround for us was to disable SSO by commenting the line to load it in the file $ORACLE_HOME/Apache/Apache/conf/httpd.conf. The line to comment out looks like: include "/u01/app/oracle/product/mid/Apache/Apache/conf/mod_osso.conf" where the /u01/app... above is the expansion of $ORACLE_HOME/Apache/Apache/conf/mod_osso.conf.
We do not use SSO for our application, so this is not a problem. I next plan to try to figure out why this behaves like this, so I can keep all the server configurations consistent.
HTH,
Mark

Oracle 9iAS Support for WebUtil

Oracle 9iAS Support for WebUtil
With the official release of WebUtil soon approaching on 10g will this mean that WebUtil will be supported on a 9i achitecture as well?
I have successfully installed the beta version of webutil in a development environment and have been very impressed by its ease of use and functionality. However my bosses are concerened about deploying a beta release on our live 9iAS R2 setup until it is confirmed that Support will be available.
When will WebUtil be officialy released on 10g?
Will Oracle offer support for those using WebUtil on 9i?
Many thanks

Tim,
I'd like to give Grant the final word on this because he is more involved, but to my understanding and current information, WebUtil will be supported with Oracle Application Server 10g only.
Forms 9i and Forms 10g are not that different in that there is no real migration work needed. For this reason we plan to support Forms10g and Application Server 10g.
The release of WebUtil - again Grant will know better - should be anytime now.
Frank

Oracle 11g Support For WLS 10 and WLS 9.2

Hi,
Does anyone know where I can find out definatively when Weblogic 10 and 9.2 will officially support Oracle 11g ?
Any official BEA sources here.
Cheers
Simon

There is only one real answer here: test it and test it thoroughly. Asking this question here is pointless, you cannot trust anyone here to give you advice you can rely on. Whatever is said, you have to validate the claims anyway.
Or did you think that Oracle employees were going to answer your question? If so, you are sadly mistaken. Oracle charges money for giving technical support.

Oracle 11g support for JDK 1.4

Dear All,
We are planning to migrate from Oracle 10.2.0.3 to Oracle 11.2.0.2. However our application server JDK version is in JDK1.4 and we use ojdbc4.jar for JDBC connectivity.
Please let me know, to migrate to Oracle 11g requires JDK1.5 and ojdbc1.5 or can we continue to stay at JDK1.4 and uses ojdbc4.jar to connect to Oracle11g.
Help Appreciated.

There is only one real answer here: test it and test it thoroughly. Asking this question here is pointless, you cannot trust anyone here to give you advice you can rely on. Whatever is said, you have to validate the claims anyway.
Or did you think that Oracle employees were going to answer your question? If so, you are sadly mistaken. Oracle charges money for giving technical support.

When will Oracle end support for Version 7

We have several servers running Oracle 7.3.4 and we are making upgrade plans.
Could anyone tell us when support for version 7 will end.
Thanks

Java 7 has already been dead for quite a while. While you could still use it for Java apps on your system, Apple blocked its use in browsers long ago. You have to install version 8 if you need Java support for the web.

Oracle ADF support for MS Office and PDF

Hello,
We are required to read from / write to MS Word, MS Excel or PDF in our ADF application.
Does ADF support this with any inuilt feature?
If not, what are the 3rd party libraries that we may need to use?
Regards,
Amar

inbuilt support for MS Excel .
<af:commandButton text="Export To Excel" immediate="true">
<af:exportCollectionActionListener type="excelHTML" exportedId="table"
filename="export.xls" title="ADF Faces Export"/>
</af:commandButton>
Edited by: -CHS on Jul 12, 2011 2:40 PM
http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_exportCollectionActionListener.html
for pdf can be used jasper report
http://www.theregister.co.uk/2006/10/24/jasperreports_tutorial/

Oracle.DataAccess support for DBProviderFactory

I have a .NET solution that requires connection to several different database backends. We are abstracting our database code to use the DBProviderFactory, which allows us to change providers without having to write specific code to each of the .NET providers. Code for SQLClient would work the same as OLEDB or Microsoft native Oracle Driver.
I want to be able to use the new Oracle.DataAccess component in the ODP but it does not seem to comply to the System.Data.Common.DBProviderFactory interfaces.
I have not seen any reference to this from Oracle they are stating that the ODP provider is compliant.
How can I use the Oracle.DataAccess objects through the DBProviderFactory?

Hi,
Support for ADO.NET 2.0 will be in beta in the next couple weeks, and is due out sometime in May.
Cheers,
Greg

Oracle's support for Z 39.50

Hi,
(1) I would like to know if Oracle 9i DB comes with any kind of built in support for Z39.50 protocol.
(2) If the answer is NO, can we achieve the same by installing some other software on the DB server ? Is this kind of setup a proven ( secure and efficient) way of exposing my DB to external search queries over the Internet ?
I also would like to know what is Oracle's official stand on this.
Thanks in advance,
Best Regards,
Karthik

Oracle Workflow is required to be installed in an Oracle database. However, the Business Event System could be used to communicate with non-Oracle databases if they can take event messages from AQ queues.

Oracle 10g support for EM64T and Windows 64-bit

Is there support for this configuration either in a patch release for 10g or is it planned for the near future?

Hi,
Oracle 10gR1 is certified for Tru64 UNIX 5.1b.
Certification of Oracle 10gR2 for Tru64 UNIX 5.1b.is planned for 1st quarter 2006.
If it does not support directly, is there a patch available etc..No idea, perhaps can you create an iTAR to post the question.
But if you read the metalink note 283751.1 Pre-Install checks for 10gR1 RDBMS (10.1.x) - Tru64 Platforms, you can see that no workaround provide...
Nicolas.
Message was edited by:
N. Gasparotto
Adding metalink note reference.

Oracle's Support for Virtual Iron customers

Please refer to the blog entry at:
http://blogs.oracle.com/virtualization/2009/07/oracle_vm_blog_whats_safe.html
Lot's of chatter out there today about VMware's migration program. Below are a few points for customers to consider…
1. Oracle is dedicated to the on-going support of Virtual Iron customers and has enhanced the support offering beyond what was previously available from Virtual Iron. Oracle is pleased to be able to offer its Lifetime Support program for Virtual Iron products, which will extend sustaining support for these products and the Virtual Iron Enterprise Edition products indefinitely. Please refer to the Lifetime Support Policy: Oracle Technology Products on the specific support options for Virtual Iron products. In addition, Oracle has retained Virtual Iron support personnel, so that people who provided support prior to the acquisition will continue to do so going forward.
2. Our intent is to seamlessly combine Virtual Iron's technology with Oracle VM to deliver a product that is unique in the industry both in breadth of functionality, and also depth of features specifically designed to make the full application stack easier to deploy, manage, and support in a virtual environment. Through the combination of Virtual Iron's technology with Oracle VM, customers will be able to benefit from an optimized, efficient application infrastructure with low operating costs. In the meantime, existing customers can be assured that they are fully supported, 24x7 through a world-class support organization.
3. Oracle VM is a free download. Virtual Iron customers can download and start using Oracle VM today. Oracle VM supports both Oracle and non-Oracle software, and delivers more efficient performance than other virtualization products. Moreover, there's no license cost for Oracle VM. You can benefit from complete virtualization and operating system stack with Oracle Enterprise Linux and Oracle VM that permits dramatically faster and easier deployment of enterprise software.
4. Compare. Oracle VM support pricing.
For more information, you can visit:
* Learn more about Oracle and Virtual Iron
* Oracle VM

Got my call and was unable to get all my questions answered (my fault had to cut call short), also I was unable to get the tech called back today so i am hoping that I can tomorrow.
Preliminary thoughts/answers seam to point that they will sell you additional licenses if you buy support for all of your existing boxes, plus the ones you want to add. Because I use single processor boxes I am trying to get them to license based on the cpu count instead of by the box. If by the box it doubles my cost.
We talked a great deal about the Oracle VM 2.2 that was released for download and how if compaired to Virtual iron. Oracle is not up to the Virtual Iron level yet but it made some big jumps and will be there pretty soon, by their account. I look forward to seeing the progress and the advances that they will surely incorperate with the huge influx of cash that Oracle will bring.
Stay tuned.

Oracle Hint support for ojdbc14.jar

hi I am just wondering if ojdbc14.jar oracle driver really supports oracle hint like /*+ PUSH_SUBQ */.
If I execute a query from Oracle SQL Developer I can really see the performance improvement in the query execution, but if I try to run the query from my java application using this oracle thin driver, I am not getting the performance improvement.
Can somebody help me if I need something else to enable support for Oracle hints in this driver?

user8711425 wrote:
hi I am just wondering And I'm just wondering if you really know what you are doing?
You claim to have tuned an SQL statement by use of the PUSH_SUBQ hint. How did you manage that, did you qualitatively say that performance improved, aand in which way?
If you had, I'd say you'd also be qualified to trace you session to see for yourself whether the hint was included or not, and whether it was actually applied or ignored.
Apart from that, he SQL is after all executed by the server. The driver just hands over the SQL, and I would be very surprised if hints were removed from the client side SQL.
But dunno, trace it if you are in doubt. And be very sure of what you are doing when using hints.
Regards
Peter

Oracle 9i Support for multi language is not working.. Giving question mark

HI,
We have an application which uses oracle 9i as the database. Riight now we are supporting only english and there is a requirement to support multiple languages like korean, chineese and japaneese.
But we are planning to migrate one part of the application to support multi languages. Means it may affect around 10 tables but with huge data. Totally we have around 100 tables.
How to enable the database for supporting multiple langugages.?
Is there any way to enable only the few tables supporting multiple languages. Because if we change the database level parameters for supporting languages, we may need to migrate entire tables. this will be a huge task.
Even if want to set the parameters for supporting multiple languages.. how to set it. Is it possible set it in the existing database or do we need to re-create the table with these prameters.
I have read in some documentation, that we can create table columns with nVarchar2 for supporting multi languages. I have created it. but if i copy some other language characters into those columns, it is giving question mark.
Is it possible to do search using text in native langugage like chineese..
Could somebody guide me on the above clarificationa and what would be the best approach..
Thanks in advance
Jino
Regards,
Jino George
Ext: 6520

You should not use any more Oracle 9.0.1 but at least Oracle 9.2.0.8 to get some extended support if you really cannot upgrade to 10g.
I don't have any Oracle 9.x database available but I've run successfully following test with Oracle 10.2.0.1 in character mode under Linux:
oracle@pbell:~$ export NLS_LANG=AMERICAN_AMERICA.AL32UTF8
oracle@pbell:~$ sqlplus / @nls
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 29 17:29:56 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> drop table t;
Table dropped.
SQL> select * from v$nls_parameters where parameter like '%SET%';
PARAMETER
VALUE
NLS_CHARACTERSET
WE8ISO8859P1
NLS_NCHAR_CHARACTERSET
AL16UTF16
SQL> create table t ( data nvarchar2(100));
Table created.
SQL> insert into t values(unistr('\76EE\7684\5730'));
1 row created.
SQL> select * from t;
DATA
目的地Try to make sure you have the right NLS_LANG setting on the client side (under Windows this is a registry setting).

Oracle XE support for XMLA

Similar Messages

Maybe you are looking for