Oracle XE wont startup

Hi all,
I had Oracle XE running on a Fedora Core3 system and it was all well till the power failed and now i am unable to start Oracle after a reboot. Sqlplus says listner not running (ora-12541) but "lsnrctl status" shows it to be running. What could possibly have gone wrong & how do i recover?
Thanks in advance.
--regards
Praveen
Problem solved - my DNS server was down, once started, Oracle started behaving.
Message was edited by:
praveen78

Hi,
>> Problem solved - my DNS server was down, once started, Oracle started behaving.
Maybe you should put direclty the IP adress.
Cheers

Similar Messages

Cant locate my hard drive...wont startup

hello
Ive been reading through problems where machines wont startup...only the flashing icons and clicking...still I cant find a solution...is my machine finally failing
Ive tried inserting the installation disk and reinstalling it but the destination window is empty [i dont see my disk]...please help with a fix...
Message was edited by: marAz14

marAz14 wrote:
Ive been reading through problems where machines wont startup...only the flashing icons and clicking...still I cant find a solution...is my machine finally failing ?
A flashing disk icon means the bootloader that starts up your Mac can't find a suitable startup disk. Something happened to the internal HDD to cause this, the damage may be repairable or not.
Ive tried inserting the installation disk and reinstalling it but the destination window is empty [i dont see my disk]...please help with a fix...
It can't see the disk for the same reason that the bootloader couldn't. Let's try to see if it is fixable before reinstalling everything and losing all your settings. Since you already are able to start up from the Install CD/DVD, go to the Utilities menu and select *Disk Utility*. There, check and see if the HDD device appears on the left column. Under and indented you should see the volume by name.
If the device does not appear, then it is really hosed and you will need a new one.
If it appears, with or without the volume, it means it is damaged but may be repairable. Click on the device and do a *Repair Disk*. If it says there are errors, repeat *Repair Disk* until it comes out clean with no more errors. After that, reboot and see if the Mac will start up correctly. When it does, run Disk Utility again (it is found inside the startup volume's Utilities folder) and do a *Repair Disk Permissions*. If all is well, you'll be a happy camper and your Mac will live to see another day.
If you can't get the *Repair Disk* procedure to come out without errors, it means that the damage is more severe and Disk Utility can't repair it. You can either get heavier duty tools, like TechTool Pro or Disk Warrior, or you can choose to format the HDD and reinstall afresh. Note that you will lose everything. If you decide to format and the formatting has errors, it also means the drive is permanently damaged and will need to be replaced.
Let us know how it turned out and welcome to Apple Discussions.

How to stop the oracle xe from startup in windows xp.

Hi ,
I've installed Oracle Database 10g XE on my windows xp desktop.When ever my machine is getting starting oracle xe is taking a lot of time for startup.
I would like to disable the oracle xe from my startup , i can start up or stop the db anytime later using the links in start menu.
Can any one let me know how to disable oracle xe from startup.If it was any other normal programs i would have done that from the msconfig program->Startup.
Any suggesstions/solutions would be very helpful.
Thanks,
Bhasker

Got the answer to my question from the posts in other categories
How to stop Oracle XE from starting at System Startup
Re: How to stop Oracle XE from starting at System Startup
oracle at startup
oracle at startup
Oracle 10g XE - default to off at system startup
Oracle 10g XE - default to off at system startup
Thanks,
Bhasker.

Oracle 11gr2 Cluster startup Sequences

Hi,
What is the Sequences of starting Oracle RAC 11gr2 services?

Hi,
The Oracle 11gR2 clusterware startup sequence starting by Oracle High Availability Services Daemon ohasd
see this link for more details :)
http://www.oracle-home.ro/Oracle_Database/RAC/11gR2-Clusterware-Startup-Sequence.html
Or
From Metalink ID 1053147.1: 11gR2 Clusterware and Grid Home

Disk Utility wont startup

I'm trying to start Disk Utility (under mac os 10.4.8, intel) but it wont startup. It bounces one time in the dock and then dissapers.
I tried a copy of an other computer, but the same problem. I Repaired Permissions in the terminal. I've reset my P ram.
This didn't work at all. Anyone an idea?

Wow, that's not good.
The first four bytes of a "Universal" Mach-O loadable object and/or executable should be (in hexadecimal representation, which is what the "0x" prefix signifies):
<pre>0xCAFEBABE</pre>
but instead, it's saying that the first four bytes are:
<pre>0xCC8B45D0</pre>
In other words, the internal data of the file has been altered or is otherwise incorrect so that it's unusable.
Before doing anything else, I would, if you haven't already done so, startup from your Install DVD/CD and use Disk Utility to make sure your disk directory checks out okay. Use the Verify/Repair Disk buttons to do this. How to repair this problem short of an Archive and Install is a bit tricky.
What exactly did you try copying from another Mac? That could work, but you need to make sure that you only copy it from a Mac of the same architecture: Intel-Mac to an Intel-Mac and PowerPC to a PowerPC Mac. Note that the Disk Utility application itself is most likely fine, there's no need to copy that. What you want to copy is the /System/Library/PrivateFrameworks/DiskImages.framework/. Copy that "DiskImages.framework" folder from another Intel-based Mac and put it into the /System/Library/PrivateFrameworks/ folder on your (damaged) Mac. Replace the existing copy. (You'll need to click the "Authenticate" button to enter your password in order to accomplish this). Then try launching Disk Utility to see if it will launch successfully.
Hope this helps....
Dual 2.7GHz PowerPC G5 w/ 2.5 GB RAM; 17" MacBook Pro w/ 2 GB RAM - Mac OS X (10.4.8)

Http service in the win nt services wont startup

http service in the win nt services wont startup either manually or automatic
please help.

My suggestion is to navigate to the Apache home and startup Apache manually. The console window will let you know if there is something wrong with the configuration files.
Frank

My macbook wont startup

my macbook wont startup, i have tried using the PRAM reset and I hear the second start up chime and then it says start up disk is full and the screen stays blue. What can I do?

Prior to this, were you getting messages indicating that your start up disk was "almost" full... suggesting you you clear up some space? Was your machine running very slow or possibly frequently crashing?

What happens in ORACLE internally during STARTUP UPGRADE ?

Everyone,
Could someone please explain/guide me What happens in ORACLE internally during STARTUP UPGRADE ?
Regards,
Sakthivel

Hi;
Please check below link
startup migrate, startup upgrade, startup restrict
startup migrate, startup upgrade, startup restrict
Regard
Helios

Oracle 11gR2 systemd startup script

I would like to write down the systemd startup script here for I can't find any on the internet. wish people don't have to browse around and find nothing.
everything on internet is about 9i and no systemd startup script example.
I hv tried several times that the script runs right and start up oracle at bootup.
Issuing systemctl and it returns the following
oracle.service loaded active exited Oracle database serverthe script is working on my Fedora 18 x86_64.
Please give your input if you find mistake, error, or anything wrong.
Thank you
oracle.service
[Unit]
Description=Oracle database server
After=syslog.target network.target
[Service]
Type=oneshot
User=oracle
Group=oinstall
RemainAfterExit=yes
ExecStart=/bin/oracle.sh;
[Install]
WantedBy=multi-user.targetoracle.sh
#! /bin/bash
# script used by oracle.service
ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=orcl
ORACLE_BASE=/home/oracle/app/oracle/product/11.2.0
$ORACLE_HOME/bin/lsnrctl start;
$ORACLE_HOME/bin/dbstart $ORACLE_HOME;

newbieRyan wrote:
I would like to write down the systemd startup script here for I can't find any on the internet. wish people don't have to browse around and find nothing.
everything on internet is about 9i and no systemd startup script example.Really??!?!?!
I googled 'start oracle on linux startup" and the very first hit is pretty much the standard reference on the subject: http://www.oracle-base.com/articles/linux/automating-database-startup-and-shutdown-on-linux.php
I hv tried several times that the script runs right and start up oracle at bootup.
Issuing systemctl and it returns the following
{code}
oracle.service loaded active exited Oracle database server
{code}
the script is working on my Fedora 18 x86_64.
Please give your input if you find mistake, error, or anything wrong.
Thank you
oracle.service
{code}
[Unit]
Description=Oracle database server
After=syslog.target network.target
[Service]
Type=oneshot
User=oracle
Group=oinstall
RemainAfterExit=yes
ExecStart=/bin/oracle.sh;
[Install]
WantedBy=multi-user.target
{code}
oracle.sh
{code}
#! /bin/bash
# script used by oracle.service
ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=orcl
ORACLE_BASE=/home/oracle/app/oracle/product/11.2.0
$ORACLE_HOME/bin/lsnrctl start;
$ORACLE_HOME/bin/dbstart $ORACLE_HOME;
{code}

Laptop wont startup when I turn it on..white screen comes up but wheel just keeps turning

Hi my laptop wont startup after I turn it on..The white screen with the apple comes up and the wagon wheel just keeps on turning.

What cat flavor does your Mac have? Lion? Mountain Lion? Older cats?

G5 Wont Startup

Hey Guys!
So I have a G5 tower that wont startup. Heres whats going on:
-When I try to start it up normally it gets to the spinning grey wheel then turns off.
-Resetting the PRAM does nothing. I might need a new PRAM battery but I'm not sure if that explains the symptoms. I ordered a new one though, should be here soon.
-When I try to boot off a Tech Tool Pro DVD I get a kernel panic screen, that says You need to restart your computer. Hold down the Power button blah blah blah... The text on the screen ends with BSD process name corresponding to current thread:kernel_task
-Tried to boot off the Tech Tool DVD with the HD unplugged, same error.
-When I try to start up in safe mode it stays on the spinning grey wheel for a couple of minutes, then turns off.
-In single user mode ran fsck -y and it returns:
disk0s3: I/O error.
Invalid node structure
(4,275)
**Volume check failed
/dev/rdisk0s3 (hfs) EXITED WITH SIGNAL 8
and then says
'PowerManagement emergency overtemp signal. Going to sleep!'
Over and over.
-I reset the nvram in open firmware earlier, which did nothing, but now when I try to start up in open firmware the screen just stays black and nothing happens.
-Earlier, booting in verbose mode would return some errors, then shut down immediately, but now its just goes to a black screen as well.
-Resetting the PMU didn't do anything.
-Switched the RAM around, so I'm pretty sure its not a problem with the RAM, or the RAM slots.
Any ideas on what's going on or what I should do next? Or should I just wait for the new PRAM battery? Thanks for helping!

Any areas I should concentrate on?
CPU heatsinks, Video card, RAM, Fans, Power supply.
about a foot away from my 10' sub. Could that have caused the damage?
I wouldn't think so, at least yet.
So how would I go about fixing the HD? TDM maybe?
Yes, but I think we have to take care of the heat issue first.

My MacBook Air wont startup after login

my MacBook Air wont startup after login???

Try to boot your computer in Safe Mode: restart and hold the shift key down.
This can take some time, so be patient.
Explanation here: http://support.apple.com/kb/ht1564
If thyis leads to the computer booting, you can restart without holding the shift key down.

Lightroom CC wont startup after installation on mac

lightroom CC wont startup after installation on both my mac's, it only hows a splash screen at startup.
I have tried to restart the computer
Anybody know what to do ?

I'm having the same issue and the log out and back in trick is not working for me.
I've just installed and when I try and launch the application, i see the splash screen for a split second and then the application crashes.
It is happening on both of my Retina MacBook Pros.
One is: Late 2013 Retina 15" MBP - 2.6 i7 - 16GB RAM - 1TB SSD - NVIDIA GeForce GT 750M 2GB
The other is Early 2013 Retina 15" MBP - 2.7 i7 - 16GB RAM - 256 SSD - NVIDIA GeForce GT 650M 1GB
Same behavior on both.
I've uninstalled and reinstalled. I've trashed pref files. Not sure what else to do.

Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.

hi, please help.
Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.
i saved these files to a folder on the destop and then turned the computer off. oops!!! now computer wont start up
How do i put the startupitems back to this folder or beter yet get into the computer to fix this.
Please please help!!!

Reinstall OS X, either from disc or a recovery partition. You don't mention which version of OS X you're running so I don't know which it will be.

(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7

제품 : ORACLE SERVER
작성날짜 : 2003-06-02
(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7
====================================================================
PURPOSE
이 자료는 O/S startup 시에 Oracle RDBMS 서비스를 자동으로 startup하
는 방법에 대한 자료이다.
Explanation
sun solaris 부팅 시 oracle DB를 auto startup하도록 하는 데 관련된 화일들이다.
/etc/inittab : o/s의 초기화 과정을 조절하는 화일
/etc/rc2 : 부팅 run-level 2 에서 사용되는 스크립트
/etc/rc0 : 부팅 run-level 0 에서 사용되는 스크립트
/etc/rc2.d/S99dbstart : /etc/init.d/dbstart 에 대한 symbolic link
/etc/rc0.d/K01dbshut : /etc/init.d/dbshut 에 대한 symbolic link
/var/opt/oracle/oratab : 시스템에 설치된 오라클 인스턴스에 대한 정보.
(참고)
/etc/init.d/dbstart, dbshut 화일은 super user(root)로 생성하시고,
symbolic link도 super user로 만드시기 바랍니다.
이 화일들은 super user가 owner가 되도록 하고, super user(root)만이
실행 가능하도록 해야 합니다.
1. 먼저 vi /etc/inittab 화일을 열어보십시오.
ap::sysinit:/sbin/autopush -f /etc/iu.ap
fs::sysinit:/sbin/rcS >/dev/console 2>&1 </dev/console
is:3:initdefault:
p3:s1234:powerfail:/usr/sbin/shutdown -y -i5 -g0 >/dev/console 2>&1
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
s1:1:wait:/usr/sbin/shutdown -y -iS -g0 >/dev/console 2>&1 </dev/console
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
s3:3:wait:/sbin/rc3 >/dev/console 2>&1 </dev/console
s5:5:wait:/sbin/rc5 >/dev/console 2>&1 </dev/console
s6:6:wait:/sbin/rc6 >/dev/console 2>&1 </dev/console
fw:0:wait:/sbin/uadmin 2 0 >/dev/console 2>&1 </dev/console
of:5:wait:/sbin/uadmin 2 6 >/dev/console 2>&1 </dev/console
rb:6:wait:/sbin/uadmin 2 1 >/dev/console 2>&1 </dev/console
sc:234:respawn:/usr/lib/saf/sac -t 300
co:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` console login: " -T
sun
-d /dev/console -l console -m ldterm,ttcompat
s1부터 s6까지 os file들에 대해 위와 같이 device redirection이 연결되어
있으면 됩니다.
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
위와 같이 설정하면 run-level 2일 경우 /sbin/rc2 스크립트가 실행된다.
/sbin/rc2 는 /etc/rc2.d 디렉토리에 들어있는 스크립트를 실행한다.
만약 스크립트가 S 로 시작하면 /sbin/rc2 는 이 스크립트에 startup 파라미
터를 부여하고 여기서 지정된 프로세스를 실행시킨다.
따라서 /etc/rc2.d/S99dbstart 화일을 사용하여 dbstart를 실행한다.
shutdown 과정도 거의 비슷하다. /etc/inittab 에 다음과 같은 라인을 보자.
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
이것은 /sbin/rc0 를 실행시키는데 /sbin/rc0 는 /etc/rc0.d 디렉토리에
들어있는 스크립트를 실행시킨다.
스크립트 이름이 K 로 시작하면 이것은 stop 파라미터를 갖고 실행되어서 이
스크립트에 지정된 프로세스를 정지시킨다.
따라서 /etc/rc0.d/K01dbshut 스크립트는 stop 파라미터를 갖고 실행되며
이 스크립트는 $ORACLE_HOME/bin/dbshut 스크립트를 실행시켜서 오라클을
shutdown 시킨다.
2. 그 다음에 vi /etc/rc2 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 2에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
set `/usr/bin/who -r`
if [ x$9 = "xS" -o x$9 = "x1" ]
then
echo 'The system is coming up. Please wait.'
BOOT=yes
3. 그 다음에 vi /etc/rc0 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 0에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
echo 'The system is coming down. Please wait.'
# make sure /usr is mounted before proceeding since init scripts
# and this shell depend on things on /usr file system
/sbin/mount /usr > /dev/null 2>&1
# The following segment is for historical purposes.
# There should be nothing in /etc/shutdown.d.
if [ -d /etc/shutdown.d ]
then
for f in /etc/shutdown.d/*
if [ -s $f ]
then
/sbin/sh ${f}
fi
fi
4. /etc/init.d/dbstart 와 /etc/init.d/dbshut 스크립트를 만들어야 합니다.
그 내용은 각각 다음과 같이 한 줄로 작성합니다.
/etc/init.d/dbstart 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbstart
/etc/init.d/dbshut 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
5. /etc/rc2.d/S99dbstart 화일을 /etc/init.d/dbstart에 대한 link로 생성합니다.
ln -s /etc/init.d/dbstart /etc/rc2.d/S99dbstart
6. /etc/rc0.d/K01dbshut 화일을 /etc/init.d/dbshut에 대한 link로 생성합니다.
ln -s /etc/init.d/dbshut /etc/rc0.d/K01dbshut
7. /var/opt/oracle/oratab 화일을 엽니다.
oratab 화일은 일반 텍스트 화일로서 시스템에 설치된 오라클 인스턴스에 대한
정보를 가지고 있는데 보통 3개의 필드로 이루어져 있으며,
첫번재 필드는 ORACLE_SID, 두번째 필드는 ORACLE_HOME, 세번째 필드는 Y 또는
N으로 구성되어 있습니다. 해당 인스턴스를 auto startup 시키려면 세번째
필드가 반드시 Y로 세팅되어 있어야 합니다.
아래에 예를 참조하세요.
ORA805:/oracle4/ora8/app/oracle/product/8.0.5:Y
ORA815:/oracle4/ora8i/app/oracle/product/8.1.5:Y
(주)
만약, <$ORACLE_HOME>/bin/dbstart 수행에 오류가 있으면 기존의 dbstart 화
일을 다른 path에 rename하고, 아래 내용만 가지고 <$ORACLE_HOME>/bin/ 아래
에 dbstart 화일을 다음과 같이 만든다.
svrmgrl <<EOF
connect internal
startup
exit
EOF
Example
none
Reference Documents
none

Hi Frank,
This is a bug in 9.0.1. It is fixed in 9.2 and
backported to 9.0.1.2 (rdbms 9.0.1.2 patch). Note that you
need to specify the sdo_indx_dims=2 in the parameter clause.
As a workaround in 9.0.1.0 you could do:
(1) remove the z coordinate (as you mentioned),
(2) set the srid to null (instead of 8307) both in
the geometries as well as the index metadata,
(3) set geodetic=false in the create-index parameters.
Hope that helps,
Ravi.

Oracle XE wont startup

Similar Messages

Maybe you are looking for