Oracle10g RAC setup over OEL

Hi,
I want to perform setup of Oracle10gR2 RAC over OEL in my machine using vmware, which OEL version should I select ?
Regards
Edited by: user640001 on Feb 25, 2013 5:44 AM

Hi Friend,
Please look below URLs
Oracle 10g RAC On Linux Using VMware Server:
http://oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-centos-4-using-vmware.php
Oracle Database 11g Release 2 RAC On Linux Using VMware Server 2:
http://oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-ol5-using-vmware-server-2.php
Oracle Real Application Clusters (RAC) 11g Release 2 (x86 32-bit & 64-bit):
http://www.oracle.com/technetwork/server-storage/vm/rac-template-11grel2-166623.html
Hope it helps..
Thanks
LaserSoft

Similar Messages

Oracle10g RAC Cluster Interconnect issues

Hello Everybody,
Just a brief overview as to what i am currently doing. I have installed Oracle10g RAC database on a cluster of two Windows 2000 AS nodes.These two nodes are accessing an external SCSI hard disk.I have used Oracle cluster file system.
Currently i am facing some performance issues when it comes to balancing workload on both the nodes.(Single instance database load is faster than a parallel load using two database instances).
I feel the performance issues could be due to IPC using public Ethernet IP instead of private interconnect.
(During a parallel load large amount of packets of data are sent over the Public IP and not Private interconnect).
How can i be sure that the Private interconnect is used for transferring cluster traffic and not the Public IP? (Oracle mentions that for a Oracle10g RAC database, private IP should be used for heart beat as well as transferring cluster traffic).
Thanks in advance,
Regards,
Salil

You find the answers here:
RAC: Frequently Asked Questions
Doc ID: NOTE:220970.1
At least crossover interconnect is completely unsupported.
Werner

RAC setup on VMware Workstation is possible?

Hi,
Is it possible to create a RAC setup on VMware workstation(VMware-workstation-6.5.1-126130) or VMware server is mandatory for such a setup.
My planned RAC setup will as show below.
OS:Enterprise-R5-U2-Server-i386
Oracle clusterware:10201_clusterware_linux32
Oracle Database:10201_database_linux32
I am planning to store OCR and Voting disks on shared RAW devices and database files on ASM.
Thank You and Regards...

Yes its possible to install it over workstation. There is as such o difference in both the products except that server is free but workstation is paid. Otherwise, both are virual machine softwares.
HTH
Aman....

Oracle10g RAC vs Oracle9i RAC with WebLogic

Hello, I am planning on installing Oracle RAC on Redhat's Linux AS 3.0, while BEA's WebLogic will the application server.
What would you choose as the back end, Oracle9i RAC or Oracle10g RAC and why ?
Also, what release/patch-level (sp ??) of Linux A.S should be used ?
EMC's storage disk arrays sould be used. Is anyone aware of any I/O issues between Linux AS and EMC disks ?
Thank you for your thoughts.
Regards,
Tom

Sun would not recommend using Oracle 10g RAC without Sun Cluster. Setup for that configuration would be found in the Sun Cluster Data Service for Oracle 10g RAC and the Oracle installation manuals.
The installation of Oracle Clusterware alone would be documented in Oracle's manuals. If you have any problems with that, you are better off asking Oracle.
Regards,
Tim
---

Oracle10g RAC with Oracle clusterware

Hi,
We are installing Oracle10g RAC with Oracle clusterware with ASM on Solaris 10. Does anybody have a installation/configuration manual for this combination.
Thanks,
Murtuja

Sun would not recommend using Oracle 10g RAC without Sun Cluster. Setup for that configuration would be found in the Sun Cluster Data Service for Oracle 10g RAC and the Oracle installation manuals.
The installation of Oracle Clusterware alone would be documented in Oracle's manuals. If you have any problems with that, you are better off asking Oracle.
Regards,
Tim
---

Oracle 11gR2 RAC setup with ASM option running on two nodes . Seeking help

Hi ,
Recently we have migrated to 11gR2 extended RAC for one of our application using ASM . Its a two node RAC setup . We are using ASM Normal redundancy feature maintaining two failure group .
I need few clarification regarding our new DR set up .
We are planning to have EMC SRDF replication from any of node storage ( Either 1 or 2) to the DR disks .
Its stright to use when we use the normal file systems . In case of ASM , I am not sure how this replication will work ? and on which level the replication should happen ?
Do i need an ASM instance up and running on DR server , Which will recognize the disks as it is once DR disks are separated from prod replication and assigned to the server ?
What should be prerequisite on DR server before we can start the srdf replication (EMC) and make it work .
Thanks for All your Valuble suggestion .

Before you decide to use EMC replication give considerable thought to the fact that you are introducing a single point of failure.
Hardware snapshot replication is very fast. That is all it is. If you database crashes because of corruption on disk ... your replica will be equally corrupt.
What is fast can not do what DataGuard does ... verify quality. If the point is DR. Go with DataGuard unless EMC is willing to, in writing (not verbally) give you a guarantee (in hard cash) to cover all costs if they replicate bad blocks and it causes an outage.
And just so no one thinks I'm picking o EMC ... the same weakness exists with all of the other storage vendor's products.

How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

Document on 10g RAC setup on solaris using vmware

Hi All,
I am planning to setup "Oracle 10g RAC setup on Solaris using vmware", but I am strucked up at installation of Soaris 10 in VMWare.
Can any body please help/provide me the document on Solaris 10 installation for RAC setup .
The main problems I am having during the SOlaris 10 setup is
1) Setting up the static public and private addresses required for RAC
2) Partitioning the disk space.
Thanks in advance,
Mahipal Reddy

Refer these,
http://www.scribd.com/doc/15650880/Install-Rac-on-Solaris-Vmware
http://www.disperu.com/using-vmware-server-install-10g-rac-on-solaris/
http://nayyares.blogspot.com/2008/11/step-by-step-rac-10g-r2-solaris-10.html
Thanks
Edited by: Cj on Dec 13, 2010 2:38 AM

Linux flavors for oracle 10gR2 RAC setup

Hi,
Oracle10gR2
Which are the alternate Linux flavors (most similar to RHEL 5.5) that can be used for Oracle10gR2 RAC setup ??
Regards

Hi,
while there other Linux versions are also vertified, best is to use Oracle Linux http://www.oracle.com/us/technologies/linux/index.html
This is based on RHEL (you also have a 5.5. version).
Regards
Sebastian

Why we need CRS in Oracle10g RAC

When i am having third party cluster solution like Veritas(SFRAC for Oracle), why its not possible to configure Oracle10g RAC with Veritas without CRS ?????
Its possible in Oracle9i but why not in Oracle10g ????

because ASM is there !!!
in 10g you do not have to use raw devices to store data files : you just use the ASM instance which comes free and provides the performance of the raw devices with the management capabilities of any filesystem
you only need to configure raw devices for the OCR and Voting Disk (but this is really simple !!! compared to the management problem of storing datafiles on raw (no autoextend , mapping and so on)

ORA-12504 in an Oracle 9.2.0.1 RAC setup

Hi I keep getting the following error when connecting to either nodes in a RAC setup:
ORA-12504: TNS:listener was not given the SID in CONNECT_DATA
I tried different permutations for the tnsnames.ora but keep getting this error. Does anybody know how to fix this problem?
Here's my tnsnames.ora entries:
LISTENERS_dotbk =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL= TCP)(Host= srvrwin.corp.wassup.com)(Port= 1521))
(ADDRESS = (PROTOCOL= TCP)(Host= srvrtwo.corp.wassup.com)(Port= 1526))
LISTENER1_dotbk1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL= TCP)(Host= srvrwin.corp.wassup.com)(Port= 1521))
LISTENER2_dotbk2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL= TCP)(Host= srvrtwo.corp.wassup.com)(Port= 1526))
dotbk1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL= TCP)(Host= srvrwin.corp.wassup.com)(Port= 1521))
(CONNECT_DATA = (SERVICE_NAME = dotbk1)(INSTANCE_NAME = dotbk1))
dotbk2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL= TCP)(Host= srvrtwo.corp.wassup.com)(Port= 1526))
(CONNECT_DATA = (SERVICE_NAME = dotbk2)(INSTANCE_NAME = dotbk2))

Hi Carsten
Thanks for the response. My versions of OWB are the same it's just the database versions that are different.
I ended up opening an SR but since the version is so old there wasn't much help except to try and apply the 10.1.0.5 OWB patch and cross my fingers.
I think I'll just end up putting the new repository in a different Oracle 10g database.
Thanks again for your help.
-gary

RAC setup for R12

Hi,
I read docs about EBS R12.1 RAC setup that said:
The traditional and still widely-used configuration where the Concurrent (Parallel) Processing servers
are located on the database tier. Unless there is a network constraint, the recommendation now is
to place them on the application tier for greater flexibility and scalability.Right now we have a multi node setup (not yet on RAC) , the AppsTier is on node1 (including the Concurrent Managers which is the default setup), while the Db-Tier is on node2. Does this mean I do not need to transfer anymore the Concurrent Manager to the Db-Tier on node2?
Are Concurrent Managers also referred to as the Concurrent Processing servers?
If my Concurrent Managers are located on the AppsTier, How can I convert it to Concurrent Paralllel Processing servers? Can you please give me notes on how to setup this type of configuration?
Thanks a lot,
Msk

Hi,
Right now we have a multi node setup (not yet on RAC) , the AppsTier is on node1 (including the Concurrent Managers which is the default setup), while the Db-Tier is on node2. Does this mean I do not need to transfer anymore the Concurrent Manager to the Db-Tier on node2?You have the option of moving the CM to the database node, but it is not required here (recommended to keep it on the application tier node where you have it running now).
Are Concurrent Managers also referred to as the Concurrent Processing servers?Yes.
If my Concurrent Managers are located on the AppsTier, How can I convert it to Concurrent Paralllel Processing servers? Can you please give me notes on how to setup this type of configuration?See the docs referenced in this thread.
PCP Configuration
PCP Configuration
Regards,
Hussein

Solaris cluster, Oracle10g RAC

I just want to understand, which one is more favorable, most popular combination used by sun customers for Oracle10g RAC.
1) Solaris cluster + VERITAS Storage Foundation
2) Solaris cluster + QFS

Please refer to http://docs.sun.com/app/docs/doc/820-2574/fmnyo?a=view for the supported options for Oracle RAC data storage. This is important because if you stray outside these you will not be on a jointly Sun/Oracle supported configuration.
Therefore, if you want to put Oracle RAC (tablespace) data files on a cluster file system, you must use shared QFS as that is the only supported option open to you. Furthermore, you can only run sQFS on top of SVM/Oban or h/w RAID - we do not support running it on VxVM/CVM.
Regards,
Tim
---

RAC setup- Configure hostname in ODI agent

I have my Master & Work repositories hosted on a Oracle RAC environment. I have a standalone ODI agent which might installed in the same physical server or in a different server.
In a RAC setup, there are multiple hostnames for the same database. How do I make the ODI agent aware that it should look into a 2nd server (when the 1st host is down) when trying to connect to the repository ? I want to know where this should be configured in the agent setup.
Does this get automatically taken care of once I include both the hostnames in the JDBC URL of the repositories ?

All depends on the JDBC you're using...
JDBC Thin work with the Oracle listener,
and JDBC OCI (which need an Oracle Client on the machine) works with a TNS description (here you can define several HOST).
I had have several issues with the Thin on our RAC so we've changed for an OCI one...
regards,
Brice

Oracle10g rac installation steps in windows2008R2

Hello All ,
Grettings....
Is it possible to have oracle10g RAC in windows2008R2?
can i have the steps to install Oracle10g RAC in windows2008R2...
Thanks,
Edited by: user4487322 on Mar 30, 2011 2:53 AM

Hi,
a.) RTFM: otn.oracle.com/documentation
b.) RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) (Doc ID 811271.1)
https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=811271.1
Regards
Sebastian

Oracle10g RAC setup over OEL

Similar Messages

Maybe you are looking for