Oracle10gR2 on Windows Server 2003 (x64) - Tape Media Managers

I am having difficulty tracking down a 3rd-party Media Manager for use with our Oracle10g (Release 2) Database on a Microsoft Windows 2003 Server (Standard x64 Edition). Have looked into ARCserve, but their Oracle Agent does not support x64.
Any thoughts or recommendations?

Another tool: NetVault
http://www.bakbone.com/products/backup_and_restore/
Backup Oracle 9 with CommVault Galaxy & RMAN
Aron

Similar Messages

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

HP LaserJet Pro MFP M127fn - Windows server 2003 X64 Drivers Missing

Hi,
We have almost 80 Numbers HP 1212 MFP Printer which we are using in windows server 2003 X64 Operating System. Because of unavailablity of this model anymore, we are using HP Laserjet Pro MFP M127fn and the driver is missing for this operating system.
Anyone have Drivers or any other solutions ?

Hi Mike, Did you end up working your problem out? We have the same issue, prints fine from Windows 7x64 desktops via TCP, but it's a no-go on Server 2008R2. Cheers - John.

Cannot print to PDF Printer in Windows server 2003 x64 (Adobe 9 STD)

Hi everyone,
I'm running into a very odd issue. We are using Citrix Presentation Server 4.5 in our environment. Recently, I install the x64 bit version of Citrix on top of Windows Server 2003 x64.
The problem that we are experience right now is that when user open a WORD or EXCEL document and try to print to PDF. The SAVE AS windows shows up to allow users to save, but nothing happens afterward. In another word, no PDF file is created.
However, if I ask the user to right click on the file (in windows explorer) and choose Convert to PDF, then the conversion go through.
Do you know a fix for this?

You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.

Db 11gR1 11.1.0.7 Certified With EBS 12.1.1 on Windows Server 2003(x64)

Hi;
I just read this and want to share Steven Chan's good news :
Database 11gR1 11.1.0.7 Certified With EBS 12.1.1 on Windows Server 2003 (x64) for details please visit :
http://blogs.oracle.com/stevenChan/2009/10/database_11107_ebs1211_winx64.html
Regard
Helios
Edited by: helios on 26.Eki.2009 07:30

Hi,
Thanks for sharing the document, but I would suggest you change the link to the following as the link above points to the main blog link ;)
http://blogs.oracle.com/stevenChan/2009/10/database_11107_ebs1211_winx64.html
Regards,
Hussein

How to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 - Intel Xeon

I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
Thanks a lot!!!
I'm desperated!!

Hi,
reply to my own question:
In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
- Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
or
- Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
So I'll give it a try with 10g database server ;-)))
Regards,
Thomas Heß

HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

Hi everyone,
I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
Details:
Steps involved:
1. Install
Windows Server 2003 x64 SP2
2. Install
SQL Server 2005 x64 SP3
3. Install Hyperion 11.1.2 for 64bit Modules:
- Foundation
- EPMA
- Calculation Manager
- Essbase
- Planning
4. Configure Hyperion Modules using DB SQL Server 2005 x64
5. Install and Configure using DB SQL Server 2005 x64
Oracle RCU for 64bit
6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
Result:
Fails to start services for either Hyperion Products or Oracle BI.
Anyone can provide correct steps?

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

JDK 1.4.2 version for Windows Server 2003/x64 on Intel Xeon 64 bit processo

Hi,
I'm currently installing a SAP Netweaver Server on a Windows Server 2003/X64 (Intel Xeon CPUs).
The server requires a JDK 64 bit with minimum version 1.4.2_09. Version 1.5.0_00 and higher are not supported by SAP.
I have searched on the J2SE 1.4.2 download page and I haven't found any windows 64 bit except for Itanium processors.
SAP mention clearly on its web portal that it supports Windows Server 2003/X64 64bit with Sun JSE 1.4.2 64 bit.
Any help?
Thanks,
adaif

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

Migrating MOSS from windows server 2003 x64 sp2 to 2008 R2

Dear All,
I can't find too much data supporting this issue
all articles says restore farm / migrate IIS / copy and replace 12 hives
I don't believe this is so practical
I need more in depth details like how IIS will be migrated [Should I use web deployment tools]
what about customized solution that modifies the web.config file and deployed as farm solutions will IIS migration tool override the changes on it
Thanks for help

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Create 10g Database with ASM on Windows Server 2003 x64

I am running Windows 2003 Server Enterprise x64 on a Dell server and wish to install Oracle 10g 10.2 with ASM.
First, I performed a software only install. Then, I created several raw partitions on each of two SATA2 disks, and created a disk group - DGROUP1 - using two partitions from each disk. So far so good.
Next, I tried to use DBCA to create a general purpose database using ASM, and that is where the problem arose. I can use sqlplus to stop and start the ASM instance, but when I use DBCA to select ASM for storage I am asked for the SYS password for ASM. I enter it and get a message "Passwords cannot be verified because: Io exception: The network adapter could not establish the connection". If I ignore this I can go on to select my DGROUP1, but the installation ultimately fails due to "insufficient privileges".
Can anyone please help?

Hi Martin
Thanks for the reply. I used ASMTOOLG to stamp the disks and then used DBCA and followed the description hereo create the disk group DGROUP1:
http://www.databasejournal.com/features/oracle/article.php/3571371
At one point, DBCA prompted me to run "localconfig add", which I did.
If it is a missing password file that is the problem, is it possible to create one to put things right?
Charles

Windows Server 2003 x64 IIS Issue

To All,
I have recently installed IIS on my Windows 2003 x64 Server and I am encountering the "%1 is not a valid Win32 application." error message when I attempt to register my website.
These are the troubleshooting tasks that I had performed so far without any success:
1). Downloaded and installed both dotnetfix.exe & NetFx64.exe Redistribution files from the Microsoft site.
Please view the pasted screen-shot of my current IIS configurations in the Web Service Extensions below.
Bob.
Robert Brindle. MCSE, MCSA & MCP/Cisco CCNP & CCNA.

This one may help.
http://forums.asp.net/t/983377.aspx?+is+not+a+valid+Win32+application+Exception+from+HRESULT+0x800700C1+
or I'd ask them over here.
Microsoft IIS forums
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Fresh Install 10.1.3.4 - Windows Server 2003 x64; - Oracle Client question

Hi,
as preparation for a server migration I have been going through all of the steps to perform a fresh install of OBIEE.
I have worked through the 'Quick Installation Guide', but referring to the full Install and Configuration Guide, but I have come up to an area where I need clarification please....
After using the SAACCT.Oracle.sql script I am now at the step; -
"Using the Oracle Net Configuration tool,create an Oracle Service to the current S_NQ_SCHED database....."
At which point I realised - following through the Quick Installation guide to the letter - I had not installed the Oracle Client Software....
My questions are; -
1. Is the Oracle Client a pre-req which is an 'unwritten' requirement for install of OBIEE - if not how do you create an oracle service to the S_NQ_SCHED database?
2. The full guide says 'IF' (hence the reason I ask the above) you install an Oracle Client alongside the OBIEE software then you must do it first as it can change java versions - I haven't - do I have to scrap my entire install or is there a 'fix' for putting the client on after the event
3. The guide points me at the 'System Requirements and Supported Platforms' document to know which clients are compatible with OBIEE - I can see nothing in the guide on this - can anyone advise please?
thanks for your help,
Robert.

Hi Paul,
I am not seeing the network/tools combination of folders anywhere, nor do I have shortcuts that you describe, is the client definitely part and parcel of the 10.1.3.4 install - can you give me one specific executable to search for - preferably the Net Configuration Assistant?
thanks again,
Robert.

Windows Server 2008 x64 and Crystal Reports Server Embedded

We're attempting to certify our software with Windows Server 2008 x64 and want to know the best way to configure both the server and client of Crystal Reports Server Embedded. Currently, our software is certified against Windows Server 2003 x86, and we install Crystal Reports Server Embedded XI Release 2 (no SP) on the application server, and we deploy the Crystal Reports .NET merge modules for XI Release 2 (no SP) on any client machines.
I believe I am correct in stating that no version of Crystal Reports Server Embedded officially supports Windows Server 2008 x64 (based on some other forum postings) until SP1 comes out (which I don't think has happened at this point). If that is true, we can live with installing the RAS on a separate Windows Server 2003 x64, if that's even possible. With that said, can we even get our Windows Server 2008 x64 running with the latest Crystal Reports 2008 .NET merge modules? We've tried many different configurations between CR XI R2 SPs and CR 2008 for both client and server and have very little luck (either it won't install correctly because of x64 or missing .cabs, etc.) on both the client and server side of things.
Can someone suggest the optimal configuration when Windows Server 2008 x64 is in the mix, noting that we can use a secondary Windows Server 2003 (x64 preferred but can fallback to x86)? Or do we have to wait for Crystal Reports Server Embedded 2008 SP1 to be released, and if so, does anyone know of the date?
Thanks,
Ross Beehler

CRSE 2008 is a 32 bit app, it works on 64 bit OS's but all parts must also be running in 32 bit mode.

Windows server 2008 R2 x64 Authentication failure while try to access Windows server 2003 R2

Hello,
I try to access Windows Server 2003 R2 Standard from Windows Server 2008 R2 x64 standard using integrated windows authentication . And because my application tries to read SQL server i'm getting and error that user is not trusted. Then I tried to open a
simple shared folder on 2003 and none of the users is able to do it. Both servers are part of common workgroup in the same IP range. Using domain is not an option. Migrating 2003 to 2008 is not an option either. The specific DB provider I have to use
supports only windows authentication, so creating user into SQL server is not an option too. I have tested many applications and cases which requires/uses windows authentication and non of the manage to connect.
Any help is very welcome because things are urgent!
Authentication failure

That method in workgroup mode may be a problem.
Authentication in SQL Server
Might ask them over here.
SQL Server forums on
MSDN
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Adding Windows 7 x64 drivers to Windows Server 2003 printserver

Hello,
I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
If anyone could offer any advice on how to get this setup working that'd be great, thanks
Marijn

Hello,
I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
If anyone could offer any advice on how to get this setup working that'd be great, thanks
Marijn

Oracle10gR2 on Windows Server 2003 (x64) - Tape Media Managers

Similar Messages

Maybe you are looking for