Oracle8 / Oracle8i port on FreeBSD / NetBSD / OpenBSD

Hi All,
Since I could not locate a better place to put this question, I decided to put it here. Can anybody tell me if there is a plan to make Oracle available on any of the above mentioned BSD UNIX variants ? I have viewed some FreeBSD support sites where contributors have given info. on installing Oracle8 v8.0.5 on FreeBSD. However the Oracle8 port is the one for Linux.
Thanks in advance
null

改めて正しい情報を書かせていただきます。
引き続き相談に乗って下されば幸いです。
IPアドレス、ホスト名は*で消しています。
SIDは実際のものとは違う値に置換しています。
■9iの端末のtnsnames.ora
HWEQ =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = *.*.*.*)(PORT = 1521))
(CONNECT_DATA =
(SID = HWEQ)
■9iの端末でのtnspingの実行結果
C:\WINDOWS\system32>tnsping HWEQ
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 19-JUL-20
11 16:15:47
Copyright (c) 1997 Oracle Corporation. All rights reserved.
パラメータ・ファイルを使用しました:
C:\oracle\ora92\network\admin\sqlnet.ora
エイリアスを解決するためにTNSNAMESアダプタを使用しました。
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 10.111.1.41)(PORT = 1521))) (CONNECT_DATA = (SID = HWEQ)))
OK (30ミリ秒)
C:\WINDOWS\system32>
■8(接続に成功している別の端末)からのtnsping結果
C:\orant\BIN>tnsping80 svr1
TNS Ping Utility for 32-bit Windows: Version 8.0.5.0.0 - Production on
15-JUL-11
17:03:51
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=svr1)(PORT=1521))
OK (90ミリ秒)
Edited by: user9189718 on 2011/07/19 16:28

Similar Messages

  • Oracle port for FreeBSD?

    Hi all!
    Can someone please tell me if Oracle (e. g. 9i) is going to make a port for FreeBSD of the Oracle server?
    Regards.

    This has been discussed on the freebsd-databases mailing list (www.freebsd.org, search the mailing lists). The LINUX version will install using the LINUX emulation port, and I think that 9i and 10g have both been installed. Another method is to install on a LINUX box that has the installation directories NFS mounted from a FreeBSD box using the same names. In both cases the installation is, of course, unsupported by Oracle if that's what you're really looking for.
    I haven't done this, since my interest in Oracle is at work where they use RH LINUX (ES 3?).

  • Flash player 9 beta FreeBSD NetBSD firefox blows

    In Ubuntu I was able to install flash player 9.0.21.78 beta
    and I was able to run Wubbzy in www.nickjr.com using firefox.
    In NetBSD I did the same install and it started to verify it
    under KDE 3.5 using firefox 1.5 at
    www.adobe.com/products/flash/about/ but then firefox blew up.
    In FreeBSD I did the same install and it started to verify it
    under KDE 3.5.5 using firefox 2.0.0.1 at
    www.adobe.com/products/flash/about/ but then firefox blew up.
    In NetBSD and FreeBSD using flash 7.0.68.0 and 7.0.69.0
    respectively the flash about test URL works fine but my daughter
    can't play her Wubbzy on www.nickjr.com.

    just a follow up.
    Does anyone have any idea why the beta flash player 9 can not
    be installed into opera on mac intel?
    Or there is something wrong with my installation?
    please help,
    Thanks

  • Oracle 8i on FreeBSD? Will it work?

    Hi!
    I am about to install Oracle8i on a FreeBSD Server, but will it work?
    I have downloaded the version for Linux...
    Any suggestions?
    Thanks in advance!
    Thomas Rokamp

    If you buy an App in the Mac App Store, it will not run on your iPad. If you buy an iPad App on your Mac via iTunes, you can sync that to your iPad, but you can't run that on your Mac. You will have to buy 2 versions to run it on both.

  • Compiling /usr/ports/java/jdk15 error

    Topic: compiling /usr/ports/java/jdk15 error
    From: Vizion <[email protected]>
    Hi
    I am compiling the FreeBSD port onto FreeBSD 5.3 and do not have enough experience to identify the cause of the error. I have raised the question on the [email protected] mailing list but so far noone has been able to help. Thanks in advance
    Can anyone please advise what to do next--
    Here is the output:
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:220:
    <identifier> expected
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:220:
    unclosed character literal
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:221:
    ')' expected
    private static final class Aliases
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:380:
    <identifier> expected
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:380:
    unclosed character literal
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:381:
    ')' expected
    private static final class Classes
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:419:
    <identifier> expected
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:419:
    unclosed character literal
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:420:
    ')' expected
    private static final class Cache
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:220:
    cannot find symbol
    symbol : class TM
    location: class sun.nio.cs.StandardCharsets
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:220:
    cannot find symbol
    symbol : class Java
    location: class sun.nio.cs.StandardCharsets
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:380:
    cannot find symbol
    symbol : class TM
    location: class sun.nio.cs.StandardCharsets
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:380:
    cannot find symbol
    symbol : class Java
    location: class sun.nio.cs.StandardCharsets
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:419:
    cannot find symbol
    symbol : class TM
    location: class sun.nio.cs.StandardCharsets
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:419:
    cannot find symbol
    symbol : class Java
    location: class sun.nio.cs.StandardCharsets
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    ../../../src/share/classes/java/io/ObjectStreamClass.java:869: warning:
    non-varargs call of varargs method with inexact argument type for last
    parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    return cons.newInstance(null);
    ^
    ../../../src/share/classes/java/io/ObjectStreamClass.java:949: warning:
    non-varargs call of varargs method with inexact argument type for last
    parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    readObjectNoDataMethod.invoke(obj, null);
    ^
    ../../../src/share/classes/java/io/ObjectStreamClass.java:977: warning:
    non-varargs call of varargs method with inexact argument type for last
    parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    return writeReplaceMethod.invoke(obj, null);
    ^
    ../../../src/share/classes/java/io/ObjectStreamClass.java:1006: warning:
    non-varargs call of varargs method with inexact argument type for last
    parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    return readResolveMethod.invoke(obj, null);
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:220:
    missing method body, or declare abstract
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:380:
    missing method body, or declare abstract
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:419:
    missing method body, or declare abstract
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:459:
    cannot reference this before supertype constructor has been called
    super("sun.nio.cs", new Aliases(), new Classes(), new Cache());
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:459:
    cannot reference this before supertype constructor has been called
    super("sun.nio.cs", new Aliases(), new Classes(), new Cache());
    ^
    /usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java:459:
    cannot reference this before supertype constructor has been called
    super("sun.nio.cs", new Aliases(), new Classes(), new Cache());
    ^
    ../../../src/share/classes/sun/misc/ProxyGenerator.java:335: warning:
    non-varargs call of varargs method with inexact argument type for last
    parameter;
    cast to java.lang.Class for a varargs call
    cast to java.lang.Class[] for a non-varargs call and to suppress this warning
    hashCodeMethod = Object.class.getMethod("hashCode", null);
    ^
    ../../../src/share/classes/sun/misc/ProxyGenerator.java:338: warning:
    non-varargs call of varargs method with inexact argument type for last
    parameter;
    cast to java.lang.Class for a varargs call
    cast to java.lang.Class[] for a non-varargs call and to suppress this warning
    toStringMethod = Object.class.getMethod("toString", null);
    ^
    ../../../src/share/classes/sun/security/jca/ProviderConfig.java:243: warning:
    non-varargs call of varargs method with inexact argument type for last
    parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    obj = cons.newInstance(new String[] { argument });
    ^
    ../../../src/share/classes/javax/xml/transform/TransformerException.java:329:
    warning: non-varargs call of varargs method with inexact argument type for
    last parameter;
    cast to java.lang.Class for a varargs call
    cast to java.lang.Class[] for a non-varargs call and to suppress this warning
    null);
    ^
    ../../../src/share/classes/javax/xml/transform/TransformerException.java:334:
    warning: non-varargs call of varargs method with inexact argument type for
    last parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    exception = (Throwable) meth.invoke(exception, null);
    ^
    ../../../src/share/classes/sun/net/www/protocol/http/HttpURLConnection.java:1186:
    warning: non-varargs call of varargs method with inexact argument type for
    last parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    return (IOException)ctr.newInstance(args);
    ^
    ../../../src/share/classes/com/sun/jmx/mbeanserver/StandardMetaDataImpl.java:637:
    warning: non-varargs call of varargs method with inexact argument type for
    last parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    result = meth.invoke(instance,null);
    ^
    ../../../src/share/classes/com/sun/jmx/mbeanserver/MBeanInstantiatorImpl.java:162:
    warning: non-varargs call of varargs method with inexact argument type for
    last parameter;
    cast to java.lang.Object for a varargs call
    cast to java.lang.Object[] for a non-varargs call and to suppress this warning
    moi= cons.newInstance(null);
    ^
    Note: * uses or overrides a deprecated API.
    Note: Recompile with -Xlint:deprecation for details.
    Note: Some input files use unchecked or unsafe operations.
    Note: Recompile with -Xlint:unchecked for details.
    21 errors
    12 warnings
    gmake[3]: *** [.compile.classlist] Error 1
    gmake[3]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make/java/java'
    gmake[2]: *** [all] Error 1
    gmake[2]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make/java'
    gmake[1]: *** [all] Error 1
    gmake[1]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make'
    gmake: *** [j2se-build] Error 2
    *** Error code 2
    Stop in /usr/ports/java/jdk15.
    david
    40 yrs navigating and computing in blue waters.
    English Owner & Captain of British Registered 60' bluewater Ketch S/V Taurus.
    Currently in San Diego, CA. Sailing May bound for Europe via Panama Canal.

    AHA!
    look here:
    http://lists.freebsd.org/pipermail/freebsd-java/2005-January/003381.html
    other posts in that thread mention a simple test, run "java -version" and if linprocfs isn't mounted, or if anything is not good with your linux emulation in general, then you'll get an error message.
    The file the poster mentions (he gets the path a little wrong but close enough it was obvious to find the right file) has comments that say it's machine generated, and it contains lines like he described, which just happen to be the same as that error message.
    I am about to manually comment out those lines and retry make install,
    but by rights this really suggests a clean start over from scratch since who knows what other files were generated badly?
    The file is:
    file:///usr/ports/java/jdk15/work/control/build/bsd-i586/gensrc/sun/nio/cs/StandardCharsets.java
    And the bad lines ar like this:
    It's the line in the middle that begins with "Java HotSpot(TM)..."
    ---snip---
    "cp1257",
    "cp5353",
    Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
    private static final class Aliases
    extends sun.util.PreHashedMap<String>
    private static final int ROWS = 512;
    private static final int SIZE = 141;
    ---snip---
    Enjoy. :)
    [email protected]
    ... posting from an IBM 8361-100 thin client hooked to my plasma tv with a wireless keyboard with touch pad, displaying an xfce4 desktop running on my freebsd box in the cellar...

  • Jdeveloper on Freebsd

    is here anyone use Jdeveloper on Freebsd?
    Any problem so far?
    Regards,

    Thanks for the reply. I installed & configured JDeveloper on FreeBSD last night, no problems at all. I had the java native port for FreeBSD already installed & configured (which uses the source from sun & linux 1.3.1 to bootstrap) and ShuJIT for just-in-time compiler.
    Performance is good, but have been too lazy to change the font.properties to avoid related errors. Needed to set permissions on the jdev file to execute, and needed to switch compiler from client to classic.
    All in all, the process took only a few minutes. I was just being paranoid. Thanks Glad to see it works. Feel free to post any issues you may have which are specific to FreeBSD. There shouldn't really be many, if any at all.
    Thanks,
    Rob

  • How does Arch compare to FreeBSD?

    Hi all,
    I'm very happy with Arch Linux, but I'm also interested in FreeBSD. I read a lot about FreeBSD (vs. Linux) in general and here's a summary: FreeBSD is faster, more coherent and easier to maintain. Linux supports more hardware and multimedia stuff and is for n00bs(just a common rant, don't pay attention to this).
    FreeBSD advocats are proud of the performance, but doesn't Arch and some other distro's offer equal or even better performance, especially with linux 2.6? And I'm also wondering what they mean with 'more coherent'. After some investigation, the only evidence for this are some vague statements that Linux is just a loosely assembled piece of software and that there's a distinct difference between the base system and third party apps(/usr/local/). I don't really see an advantage in having base and rest separated. Nor do I fully understand what they mean with loosely assembled. What really shocked me was that FreeBSD people don't seem to know Linux can also be easy to maintain. E.g. pacman, portage, abs, dpkg/apt, yum, apt-rpm,etc.
    Please don't take this as a flame or rant or anything like that. It's written from a Linux-user point of view, because, well, I am one. Don't get me wrong, I'm really interested in trying FreeBSD, but I'm just having a critical look at it. If I do someting, I want to do it for a reason. So what are your opinions about FreeBSD? Have I overlooked something or don't you agree with me at all? I'd love to hear your opinions. Sorry for my bad English.

    About the coherency : very simple put
    - Linux is just the kernel, the rest comes from GNU and other third parties. The distros assemble that.
    - *BSD is the whole OS, including kernel and everything in /usr (but not /usr/local )
    A little more detailed : FreeBSD prvides next to the kernel also the C-library, all the programs like "ls" "cp" etc. and, more importantly, if there are kernel functions that require user land tools, they are automaticallly in the OS. However, there are programs in the core OS that are not written by the *BSD teams - most prominently gcc.
    And to demonstrate that further : all the extra packages that are available for the BSD's usually get installed into /usr/local - like KDE and Gnome - to demonstrate that these packages are not part of the core OS. But they are so easily installed, though.
    In general I rather compare one of the BSD's with a specific Linux distro - not with Linux in general - especially since then you actually compare whole OS's.
    Apart from the coherency : if you feel comfortable with Arch you will feel comfortable with the BSD's. The simple configuration and boot process are very similar. In fact, AL was inspired by the BSDs (if I interpret the various documentations correclty :-) ). Also, I think the percentage of BSD users (former or current) in the Arch community is very high. I myself use FreeBSD and OpenBSD quite a bit - and if it wasn't for AL, a linux kernel may be booted very rarely at home ;-)

  • Any JDeveloper on FreeBSD

    Currently running NetBeans on FreeBSD. Anyone running JDeveloper on FreeBSD(4.4)? Any tips? Am I missing something, or is there some way to search these forums?
    Thanks in Advance.
    -Don

    Thanks for the reply. I installed & configured JDeveloper on FreeBSD last night, no problems at all. I had the java native port for FreeBSD already installed & configured (which uses the source from sun & linux 1.3.1 to bootstrap) and ShuJIT for just-in-time compiler.
    Performance is good, but have been too lazy to change the font.properties to avoid related errors. Needed to set permissions on the jdev file to execute, and needed to switch compiler from client to classic.
    All in all, the process took only a few minutes. I was just being paranoid. Thanks Glad to see it works. Feel free to post any issues you may have which are specific to FreeBSD. There shouldn't really be many, if any at all.
    Thanks,
    Rob

  • Nginx + php-fpm problem

    Hello there.
    I just setup nginx with mysql and php-fpm to my archlinux install and i need help.
    i checked all over internet and try every solution, none still work.
    i have a blank page problem
    this is working correctly:
    <?php
    phpinfo();
    ?>
    short tags are enabled and php short tags are also working.
    i try to install phpbb, the install page load, once the install done.. blank page.
    i tryed a working backup of phpbb from my old server.. blank page, same with my phpnuke backup, blank page.
    i tryed chown to root:root and http:http, and chmod rwx for group user and other, i dont think it is a permission problem.
    Probably a little stupid error on my end but i can't find it, i tryed everything.
    my nginx.cong
    #user html;
    worker_processes 1;
    #error_log logs/error.log;
    #error_log logs/error.log notice;
    #error_log logs/error.log info;
    #pid logs/nginx.pid;
    events {
    worker_connections 1024;
    http {
    include mime.types;
    default_type application/octet-stream;
    #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
    # '$status $body_bytes_sent "$http_referer" '
    # '"$http_user_agent" "$http_x_forwarded_for"';
    #access_log logs/access.log main;
    sendfile on;
    #tcp_nopush on;
    #keepalive_timeout 0;
    keepalive_timeout 65;
    #gzip on;
    server {
    listen 80;
    server_name localhost;
    #charset koi8-r;
    #access_log logs/host.access.log main;
    location / {
    root /usr/share/nginx/html;
    index index.html index.htm;
    #error_page 404 /404.html;
    # redirect server error pages to the static page /50x.html
    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
    root /usr/share/nginx/html;
    # proxy the PHP scripts to Apache listening on 127.0.0.1:80
    #location ~ \.php$ {
    # proxy_pass http://127.0.0.1;
    # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
    #location ~ \.php$ {
    # root html;
    # fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
    # fastcgi_index index.php;
    # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
    # include fastcgi_params;
    # deny access to .htaccess files, if Apache's document root
    # concurs with nginx's one
    #location ~ /\.ht {
    # deny all;
    # another virtual host using mix of IP-, name-, and port-based configuration
    #server {
    # listen 8000;
    # listen somename:8080;
    # server_name somename alias another.alias;
    # location / {
    # root html;
    # index index.html index.htm;
    server {
    listen 80;
    listen clan-ws.net:80;
    server_name clan-ws.net www.clan-ws.net;
    autoindex on;
    root /srv/http/;
    index index.html index.htm index.php;
    location ~ \.php$ {
    #fastcgi_pass 127.0.0.1:9000;
    fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
    fastcgi_index index.php;
    # include fastcgi.conf;
    include fastcgi_params;
    # include /etc/nginx/fastcgi_params;
    # HTTPS server
    #server {
    # listen 443;
    # server_name localhost;
    # ssl on;
    # ssl_certificate cert.pem;
    # ssl_certificate_key cert.key;
    # ssl_session_timeout 5m;
    # ssl_protocols SSLv2 SSLv3 TLSv1;
    # ssl_ciphers HIGH:!aNULL:!MD5;
    # ssl_prefer_server_ciphers on;
    # location / {
    # root html;
    # index index.html index.htm;
    php-fpm.conf
    ; FPM Configuration ;
    ; All relative paths in this configuration file are relative to PHP's install
    ; prefix (/usr). This prefix can be dynamicaly changed by using the
    ; '-p' argument from the command line.
    ; Include one or more files. If glob(3) exists, it is used to include a bunch of
    ; files from a glob(3) pattern. This directive can be used everywhere in the
    ; file.
    ; Relative path can also be used. They will be prefixed by:
    ; - the global prefix if it's been set (-p arguement)
    ; - /usr otherwise
    ;include=/etc/php/fpm.d/*.conf
    ; Global Options ;
    [global]
    ; Pid file
    ; Note: the default prefix is /var
    ; Default Value: none
    pid = /run/php-fpm/php-fpm.pid
    ; Error log file
    ; If it's set to "syslog", log is sent to syslogd instead of being written
    ; in a local file.
    ; Note: the default prefix is /var
    ; Default Value: log/php-fpm.log
    ;error_log = log/php-fpm.log
    ; syslog_facility is used to specify what type of program is logging the
    ; message. This lets syslogd specify that messages from different facilities
    ; will be handled differently.
    ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
    ; Default Value: daemon
    ;syslog.facility = daemon
    ; syslog_ident is prepended to every message. If you have multiple FPM
    ; instances running on the same server, you can change the default value
    ; which must suit common needs.
    ; Default Value: php-fpm
    ;syslog.ident = php-fpm
    ; Log level
    ; Possible Values: alert, error, warning, notice, debug
    ; Default Value: notice
    ;log_level = notice
    ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
    ; interval set by emergency_restart_interval then FPM will restart. A value
    ; of '0' means 'Off'.
    ; Default Value: 0
    ;emergency_restart_threshold = 0
    ; Interval of time used by emergency_restart_interval to determine when
    ; a graceful restart will be initiated. This can be useful to work around
    ; accidental corruptions in an accelerator's shared memory.
    ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;emergency_restart_interval = 0
    ; Time limit for child processes to wait for a reaction on signals from master.
    ; Available units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;process_control_timeout = 0
    ; The maximum number of processes FPM will fork. This has been design to control
    ; the global number of processes when using dynamic PM within a lot of pools.
    ; Use it with caution.
    ; Note: A value of 0 indicates no limit
    ; Default Value: 0
    ; process.max = 128
    ; Specify the nice(2) priority to apply to the master process (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool process will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; process.priority = -19
    ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
    ; Default Value: yes
    ;daemonize = yes
    ; Set open file descriptor rlimit for the master process.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit for the master process.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Specify the event mechanism FPM will use. The following is available:
    ; - select (any POSIX os)
    ; - poll (any POSIX os)
    ; - epoll (linux >= 2.5.44)
    ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
    ; - /dev/poll (Solaris >= 7)
    ; - port (Solaris >= 10)
    ; Default Value: not set (auto detection)
    ;events.mechanism = epoll
    ; When FPM is build with systemd integration, specify the interval,
    ; in second, between health report notification to systemd.
    ; Set to 0 to disable.
    ; Available Units: s(econds), m(inutes), h(ours)
    ; Default Unit: seconds
    ; Default value: 10
    ;systemd_interval = 10
    ; Pool Definitions ;
    ; Multiple pools of child processes may be started with different listening
    ; ports and different management options. The name of the pool will be
    ; used in logs and stats. There is no limitation on the number of pools which
    ; FPM can handle. Your system will tell you anyway :)
    ; Start a new pool named 'www'.
    ; the variable $pool can we used in any directive and will be replaced by the
    ; pool name ('www' here)
    [www]
    ; Per pool prefix
    ; It only applies on the following directives:
    ; - 'slowlog'
    ; - 'listen' (unixsocket)
    ; - 'chroot'
    ; - 'chdir'
    ; - 'php_values'
    ; - 'php_admin_values'
    ; When not set, the global prefix (or /usr) applies instead.
    ; Note: This directive can also be relative to the global prefix.
    ; Default Value: none
    ;prefix = /path/to/pools/$pool
    ; Unix user/group of processes
    ; Note: The user is mandatory. If the group is not set, the default user's group
    ; will be used.
    user = http
    group = http
    ; The address on which to accept FastCGI requests.
    ; Valid syntaxes are:
    ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
    ; a specific port;
    ; 'port' - to listen on a TCP socket to all addresses on a
    ; specific port;
    ; '/path/to/unix/socket' - to listen on a unix socket.
    ; Note: This value is mandatory.
    ;listen = 127.0.0.1:9000
    listen = /run/php-fpm/php-fpm.sock
    ; Set listen(2) backlog.
    ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
    ;listen.backlog = 128
    ; Set permissions for unix socket, if one is used. In Linux, read/write
    ; permissions must be set in order to allow connections from a web server. Many
    ; BSD-derived systems allow connections regardless of permissions.
    ; Default Values: user and group are set as the running user
    ; mode is set to 0666
    listen.owner = http
    listen.group = http
    listen.mode = 0660
    ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
    ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
    ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
    ; must be separated by a comma. If this value is left blank, connections will be
    ; accepted from any ip address.
    ; Default Value: any
    ;listen.allowed_clients = 127.0.0.1
    ; Specify the nice(2) priority to apply to the pool processes (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool processes will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; priority = -19
    ; Choose how the process manager will control the number of child processes.
    ; Possible Values:
    ; static - a fixed number (pm.max_children) of child processes;
    ; dynamic - the number of child processes are set dynamically based on the
    ; following directives. With this process management, there will be
    ; always at least 1 children.
    ; pm.max_children - the maximum number of children that can
    ; be alive at the same time.
    ; pm.start_servers - the number of children created on startup.
    ; pm.min_spare_servers - the minimum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is less than this
    ; number then some children will be created.
    ; pm.max_spare_servers - the maximum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is greater than this
    ; number then some children will be killed.
    ; ondemand - no children are created at startup. Children will be forked when
    ; new requests will connect. The following parameter are used:
    ; pm.max_children - the maximum number of children that
    ; can be alive at the same time.
    ; pm.process_idle_timeout - The number of seconds after which
    ; an idle process will be killed.
    ; Note: This value is mandatory.
    pm = dynamic
    ; The number of child processes to be created when pm is set to 'static' and the
    ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
    ; This value sets the limit on the number of simultaneous requests that will be
    ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
    ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
    ; CGI. The below defaults are based on a server without much resources. Don't
    ; forget to tweak pm.* to fit your needs.
    ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
    ; Note: This value is mandatory.
    pm.max_children = 5
    ; The number of child processes created on startup.
    ; Note: Used only when pm is set to 'dynamic'
    ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
    pm.start_servers = 2
    ; The desired minimum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.min_spare_servers = 1
    ; The desired maximum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.max_spare_servers = 3
    ; The number of seconds after which an idle process will be killed.
    ; Note: Used only when pm is set to 'ondemand'
    ; Default Value: 10s
    ;pm.process_idle_timeout = 10s;
    ; The number of requests each child process should execute before respawning.
    ; This can be useful to work around memory leaks in 3rd party libraries. For
    ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
    ; Default Value: 0
    ;pm.max_requests = 500
    ; The URI to view the FPM status page. If this value is not set, no URI will be
    ; recognized as a status page. It shows the following informations:
    ; pool - the name of the pool;
    ; process manager - static, dynamic or ondemand;
    ; start time - the date and time FPM has started;
    ; start since - number of seconds since FPM has started;
    ; accepted conn - the number of request accepted by the pool;
    ; listen queue - the number of request in the queue of pending
    ; connections (see backlog in listen(2));
    ; max listen queue - the maximum number of requests in the queue
    ; of pending connections since FPM has started;
    ; listen queue len - the size of the socket queue of pending connections;
    ; idle processes - the number of idle processes;
    ; active processes - the number of active processes;
    ; total processes - the number of idle + active processes;
    ; max active processes - the maximum number of active processes since FPM
    ; has started;
    ; max children reached - number of times, the process limit has been reached,
    ; when pm tries to start more children (works only for
    ; pm 'dynamic' and 'ondemand');
    ; Value are updated in real time.
    ; Example output:
    ; pool: www
    ; process manager: static
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 62636
    ; accepted conn: 190460
    ; listen queue: 0
    ; max listen queue: 1
    ; listen queue len: 42
    ; idle processes: 4
    ; active processes: 11
    ; total processes: 15
    ; max active processes: 12
    ; max children reached: 0
    ; By default the status page output is formatted as text/plain. Passing either
    ; 'html', 'xml' or 'json' in the query string will return the corresponding
    ; output syntax. Example:
    ; http://www.foo.bar/status
    ; http://www.foo.bar/status?json
    ; http://www.foo.bar/status?html
    ; http://www.foo.bar/status?xml
    ; By default the status page only outputs short status. Passing 'full' in the
    ; query string will also return status for each pool process.
    ; Example:
    ; http://www.foo.bar/status?full
    ; http://www.foo.bar/status?json&full
    ; http://www.foo.bar/status?html&full
    ; http://www.foo.bar/status?xml&full
    ; The Full status returns for each process:
    ; pid - the PID of the process;
    ; state - the state of the process (Idle, Running, ...);
    ; start time - the date and time the process has started;
    ; start since - the number of seconds since the process has started;
    ; requests - the number of requests the process has served;
    ; request duration - the duration in µs of the requests;
    ; request method - the request method (GET, POST, ...);
    ; request URI - the request URI with the query string;
    ; content length - the content length of the request (only with POST);
    ; user - the user (PHP_AUTH_USER) (or '-' if not set);
    ; script - the main script called (or '-' if not set);
    ; last request cpu - the %cpu the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because CPU calculation is done when the request
    ; processing has terminated;
    ; last request memory - the max amount of memory the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because memory calculation is done when the request
    ; processing has terminated;
    ; If the process is in Idle state, then informations are related to the
    ; last request the process has served. Otherwise informations are related to
    ; the current request being served.
    ; Example output:
    ; pid: 31330
    ; state: Running
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 63087
    ; requests: 12808
    ; request duration: 1250261
    ; request method: GET
    ; request URI: /test_mem.php?N=10000
    ; content length: 0
    ; user: -
    ; script: /home/fat/web/docs/php/test_mem.php
    ; last request cpu: 0.00
    ; last request memory: 0
    ; Note: There is a real-time FPM status monitoring sample web page available
    ; It's available in: ${prefix}/share/fpm/status.html
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;pm.status_path = /status
    ; The ping URI to call the monitoring page of FPM. If this value is not set, no
    ; URI will be recognized as a ping page. This could be used to test from outside
    ; that FPM is alive and responding, or to
    ; - create a graph of FPM availability (rrd or such);
    ; - remove a server from a group if it is not responding (load balancing);
    ; - trigger alerts for the operating team (24/7).
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;ping.path = /ping
    ; This directive may be used to customize the response of a ping request. The
    ; response is formatted as text/plain with a 200 response code.
    ; Default Value: pong
    ;ping.response = pong
    ; The access log file
    ; Default: not set
    ;access.log = log/$pool.access.log
    ; The access log format.
    ; The following syntax is allowed
    ; %%: the '%' character
    ; %C: %CPU used by the request
    ; it can accept the following format:
    ; - %{user}C for user CPU only
    ; - %{system}C for system CPU only
    ; - %{total}C for user + system CPU (default)
    ; %d: time taken to serve the request
    ; it can accept the following format:
    ; - %{seconds}d (default)
    ; - %{miliseconds}d
    ; - %{mili}d
    ; - %{microseconds}d
    ; - %{micro}d
    ; %e: an environment variable (same as $_ENV or $_SERVER)
    ; it must be associated with embraces to specify the name of the env
    ; variable. Some exemples:
    ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
    ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
    ; %f: script filename
    ; %l: content-length of the request (for POST request only)
    ; %m: request method
    ; %M: peak of memory allocated by PHP
    ; it can accept the following format:
    ; - %{bytes}M (default)
    ; - %{kilobytes}M
    ; - %{kilo}M
    ; - %{megabytes}M
    ; - %{mega}M
    ; %n: pool name
    ; %o: ouput header
    ; it must be associated with embraces to specify the name of the header:
    ; - %{Content-Type}o
    ; - %{X-Powered-By}o
    ; - %{Transfert-Encoding}o
    ; %p: PID of the child that serviced the request
    ; %P: PID of the parent of the child that serviced the request
    ; %q: the query string
    ; %Q: the '?' character if query string exists
    ; %r: the request URI (without the query string, see %q and %Q)
    ; %R: remote IP address
    ; %s: status (response code)
    ; %t: server time the request was received
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %T: time the log has been written (the request has finished)
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %u: remote user
    ; Default: "%R - %u %t \"%m %r\" %s"
    ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
    ; The log file for slow requests
    ; Default Value: not set
    ; Note: slowlog is mandatory if request_slowlog_timeout is set
    ;slowlog = log/$pool.log.slow
    ; The timeout for serving a single request after which a PHP backtrace will be
    ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_slowlog_timeout = 0
    ; The timeout for serving a single request after which the worker process will
    ; be killed. This option should be used when the 'max_execution_time' ini option
    ; does not stop script execution for some reason. A value of '0' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_terminate_timeout = 0
    ; Set open file descriptor rlimit.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Chroot to this directory at the start. This value must be defined as an
    ; absolute path. When this value is not set, chroot is not used.
    ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
    ; of its subdirectories. If the pool prefix is not set, the global prefix
    ; will be used instead.
    ; Note: chrooting is a great security feature and should be used whenever
    ; possible. However, all PHP paths will be relative to the chroot
    ; (error_log, sessions.save_path, ...).
    ; Default Value: not set
    ;chroot =
    ; Chdir to this directory at the start.
    ; Note: relative path can be used.
    ; Default Value: current directory or / when chroot
    ;chdir = /srv/http
    ; Redirect worker stdout and stderr into main error log. If not set, stdout and
    ; stderr will be redirected to /dev/null according to FastCGI specs.
    ; Note: on highloaded environement, this can cause some delay in the page
    ; process time (several ms).
    ; Default Value: no
    ;catch_workers_output = yes
    ; Limits the extensions of the main script FPM will allow to parse. This can
    ; prevent configuration mistakes on the web server side. You should only limit
    ; FPM to .php extensions to prevent malicious users to use other extensions to
    ; exectute php code.
    ; Note: set an empty value to allow all extensions.
    ; Default Value: .php
    ;security.limit_extensions = .php .php3 .php4 .php5
    ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
    ; the current environment.
    ; Default Value: clean env
    ;env[HOSTNAME] = $HOSTNAME
    ;env[PATH] = /usr/local/bin:/usr/bin:/bin
    ;env[TMP] = /tmp
    ;env[TMPDIR] = /tmp
    ;env[TEMP] = /tmp
    ; Additional php.ini defines, specific to this pool of workers. These settings
    ; overwrite the values previously defined in the php.ini. The directives are the
    ; same as the PHP SAPI:
    ; php_value/php_flag - you can set classic ini defines which can
    ; be overwritten from PHP call 'ini_set'.
    ; php_admin_value/php_admin_flag - these directives won't be overwritten by
    ; PHP call 'ini_set'
    ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
    ; Defining 'extension' will load the corresponding shared extension from
    ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
    ; overwrite previously defined php.ini values, but will append the new value
    ; instead.
    ; Note: path INI options can be relative and will be expanded with the prefix
    ; (pool, global or /usr)
    ; Default Value: nothing is defined by default except the values in php.ini and
    ; specified at startup with the -d argument
    ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
    ;php_flag[display_errors] = off
    ;php_admin_value[error_log] = /var/log/fpm-php.www.log
    ;php_admin_flag[log_errors] = on
    ;php_admin_value[memory_limit] = 32M
    php.ini
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; display_startup_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; error_reporting
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; log_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.bug_compat_42
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.bug_compat_warn
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It's been
    ; recommended for several years that you not use the short tag "short cut" and
    ; instead to use the full <?php and ?> tag combination. With the wide spread use
    ; of XML and use of these tags by other languages, the server can become easily
    ; confused and end up parsing the wrong code in the wrong context. But because
    ; this short cut has been a feature for such a long time, it's currently still
    ; supported for backwards compatibility, but we recommend you don't use them.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on NT, not valid in Windows 95).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.

    rune0077 wrote:
    Try this solution:
    https://wiki.archlinux.org/index.php/Ng … gh_FastCGI
    That isn't exactly my problem. The server responds with no body (so no blank html document)
    root@server ~# curl -vH "Host: ███████" localhost/test.php
    * Hostname was NOT found in DNS cache
    * Trying ::1...
    * connect to ::1 port 80 failed: Connection refused
    * Trying 127.0.0.1...
    * Connected to localhost (127.0.0.1) port 80 (#0)
    > GET /test.php HTTP/1.1
    > User-Agent: curl/7.36.0
    > Accept: */*
    > Host: ███████████
    >
    < HTTP/1.1 200 OK
    * Server nginx/1.6.0 is not blacklisted
    < Server: nginx/1.6.0
    < Date: Tue, 20 May 2014 20:11:02 GMT
    < Content-Type: text/html
    < Transfer-Encoding: chunked
    < Connection: keep-alive
    < Vary: Accept-Encoding
    <
    * Connection #0 to host localhost left intact
    When I do set SCRIPT_FILENAME to $document_root$fastcgi_script_name, it responds with "No input file specified."
    Spider.007 wrote:If there are no errors; tell us what your access-logs tell. Enable them in fpm and tell us if the request ends up there. Also; nginx can also log the upstream ip-address; if you add that to the access-logs you'll at least know if the problem is nginx, or fpm
    The nginx log message:
    127.0.0.1 - - [20/May/2014:14:15:50 -0600] "GET /test.php HTTP/1.1" 200 5 "-" "curl/7.36.0"
    I'll try to find a way to make php-fpm more verbose and I'll edit this post with the error when I do. At the moment it's only logging startups/shutdowns.
    Last edited by phillips1012 (2014-05-20 20:23:40)

  • Nginx with php-fpm, connection with php-fpm.sock failed

    I am feeling stumped, trying to setup NGINX for the first time on Arch. Followed the wiki a few times and keep getting hung up in the same spot. I followed the instructions to install NGINX in a chroot, then went on to setup php-fpm. I have not tried setting up any sites, just trying to get to the point of showing the "it works" page, before I moved to setting up a site.
    The error I am getting on the page
    Sorry, the page you are looking for is currently unavailable.
    Please try again later.
    error in log
    2013/03/07 13:04:05 [crit] 1868#0: *1 connect() to unix:/run/php-fpm/php-fpm.sock failed (2: No such file or directory) while connecting to upstream, client: MYIP, server: SERVERIP, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/run/php-fpm/php-fpm.sock:", host: "SERVERIP"
    SERVERIP: is the IP of the server and shows properly in the log, same with MYIP
    Here are my configs
    /srv/http/etc/nginx.conf
    #user http;
    worker_processes 1;
    #error_log logs/error.log;
    #error_log logs/error.log notice;
    #error_log logs/error.log info;
    #pid logs/nginx.pid;
    events {
    worker_connections 1024;
    http {
    include mime.types;
    default_type application/octet-stream;
    #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
    # '$status $body_bytes_sent "$http_referer" '
    # '"$http_user_agent" "$http_x_forwarded_for"';
    #access_log logs/access.log main;
    sendfile on;
    #tcp_nopush on;
    #keepalive_timeout 0;
    keepalive_timeout 65;
    #gzip on;
    server {
    listen 80;
    server_name SERVERIP;
    include fpm.conf;
    #charset koi8-r;
    #access_log logs/host.access.log main;
    location / {
    root /usr/share/nginx/html;
    index index.html index.htm;
    #error_page 404 /404.html;
    # redirect server error pages to the static page /50x.html
    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
    root /usr/share/nginx/html;
    # proxy the PHP scripts to Apache listening on 127.0.0.1:80
    #location ~ \.php$ {
    # proxy_pass http://127.0.0.1;
    # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
    #location ~ \.php$ {
    # root html;
    # fastcgi_pass 127.0.0.1:9000;
    # fastcgi_index index.php;
    # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
    # include fastcgi_params;
    # deny access to .htaccess files, if Apache's document root
    # concurs with nginx's one
    #location ~ /\.ht {
    # deny all;
    # another virtual host using mix of IP-, name-, and port-based configuration
    #server {
    # listen 8000;
    # listen somename:8080;
    # server_name somename alias another.alias;
    # location / {
    # root html;
    # index index.html index.htm;
    # HTTPS server
    #server {
    # listen 443;
    # server_name localhost;
    # ssl on;
    # ssl_certificate cert.pem;
    # ssl_certificate_key cert.key;
    # ssl_session_timeout 5m;
    # ssl_protocols SSLv2 SSLv3 TLSv1;
    # ssl_ciphers HIGH:!aNULL:!MD5;
    # ssl_prefer_server_ciphers on;
    # location / {
    # root html;
    # index index.html index.htm;
    /srv/http/etc/nginx/fpm.conf  - this is the file in the wiki that says php.conf
    location ~ \.(php|html|htm)$ {
    fastcgi_pass unix:/run/php-fpm/php-fpm.sock;
    fastcgi_index index.php;
    include fastcgi.conf;
    /etc/php/php-fpm.conf
    ; FPM Configuration ;
    ; All relative paths in this configuration file are relative to PHP's install
    ; prefix (/usr). This prefix can be dynamicaly changed by using the
    ; '-p' argument from the command line.
    ; Include one or more files. If glob(3) exists, it is used to include a bunch of
    ; files from a glob(3) pattern. This directive can be used everywhere in the
    ; file.
    ; Relative path can also be used. They will be prefixed by:
    ; - the global prefix if it's been set (-p arguement)
    ; - /usr otherwise
    ;include=/etc/php/fpm.d/*.conf
    ; Global Options ;
    [global]
    ; Pid file
    ; Note: the default prefix is /var
    ; Default Value: none
    pid = /run/php-fpm/php-fpm.pid
    ; Error log file
    ; If it's set to "syslog", log is sent to syslogd instead of being written
    ; in a local file.
    ; Note: the default prefix is /var
    ; Default Value: log/php-fpm.log
    ;error_log = log/php-fpm.log
    ; syslog_facility is used to specify what type of program is logging the
    ; message. This lets syslogd specify that messages from different facilities
    ; will be handled differently.
    ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
    ; Default Value: daemon
    ;syslog.facility = daemon
    ; syslog_ident is prepended to every message. If you have multiple FPM
    ; instances running on the same server, you can change the default value
    ; which must suit common needs.
    ; Default Value: php-fpm
    ;syslog.ident = php-fpm
    ; Log level
    ; Possible Values: alert, error, warning, notice, debug
    ; Default Value: notice
    ;log_level = notice
    ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
    ; interval set by emergency_restart_interval then FPM will restart. A value
    ; of '0' means 'Off'.
    ; Default Value: 0
    ;emergency_restart_threshold = 0
    ; Interval of time used by emergency_restart_interval to determine when
    ; a graceful restart will be initiated. This can be useful to work around
    ; accidental corruptions in an accelerator's shared memory.
    ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;emergency_restart_interval = 0
    ; Time limit for child processes to wait for a reaction on signals from master.
    ; Available units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;process_control_timeout = 0
    ; The maximum number of processes FPM will fork. This has been design to control
    ; the global number of processes when using dynamic PM within a lot of pools.
    ; Use it with caution.
    ; Note: A value of 0 indicates no limit
    ; Default Value: 0
    ; process.max = 128
    ; Specify the nice(2) priority to apply to the master process (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool process will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; process.priority = -19
    ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
    ; Default Value: yes
    ;daemonize = yes
    ; Set open file descriptor rlimit for the master process.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit for the master process.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Specify the event mechanism FPM will use. The following is available:
    ; - select (any POSIX os)
    ; - poll (any POSIX os)
    ; - epoll (linux >= 2.5.44)
    ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
    ; - /dev/poll (Solaris >= 7)
    ; - port (Solaris >= 10)
    ; Default Value: not set (auto detection)
    ; events.mechanism = epoll
    ; Pool Definitions ;
    ; Multiple pools of child processes may be started with different listening
    ; ports and different management options. The name of the pool will be
    ; used in logs and stats. There is no limitation on the number of pools which
    ; FPM can handle. Your system will tell you anyway :)
    ; Start a new pool named 'www'.
    ; the variable $pool can we used in any directive and will be replaced by the
    ; pool name ('www' here)
    [www]
    ; Per pool prefix
    ; It only applies on the following directives:
    ; - 'slowlog'
    ; - 'listen' (unixsocket)
    ; - 'chroot'
    ; - 'chdir'
    ; - 'php_values'
    ; - 'php_admin_values'
    ; When not set, the global prefix (or /usr) applies instead.
    ; Note: This directive can also be relative to the global prefix.
    ; Default Value: none
    ;prefix = /path/to/pools/$pool
    ; Unix user/group of processes
    ; Note: The user is mandatory. If the group is not set, the default user's group
    ; will be used.
    user = http
    group = http
    ; The address on which to accept FastCGI requests.
    ; Valid syntaxes are:
    ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
    ; a specific port;
    ; 'port' - to listen on a TCP socket to all addresses on a
    ; specific port;
    ; '/path/to/unix/socket' - to listen on a unix socket.
    ; Note: This value is mandatory.
    ;listen = 127.0.0.1:9000
    listen = /run/php-fpm/php-fpm.sock
    ; Set listen(2) backlog.
    ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
    ;listen.backlog = 128
    ; Set permissions for unix socket, if one is used. In Linux, read/write
    ; permissions must be set in order to allow connections from a web server. Many
    ; BSD-derived systems allow connections regardless of permissions.
    ; Default Values: user and group are set as the running user
    ; mode is set to 0666
    listen.owner = http
    listen.group = http
    listen.mode = 0666
    ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
    ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
    ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
    ; must be separated by a comma. If this value is left blank, connections will be
    ; accepted from any ip address.
    ; Default Value: any
    ;listen.allowed_clients = 127.0.0.1
    ; Specify the nice(2) priority to apply to the pool processes (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool processes will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; priority = -19
    ; Choose how the process manager will control the number of child processes.
    ; Possible Values:
    ; static - a fixed number (pm.max_children) of child processes;
    ; dynamic - the number of child processes are set dynamically based on the
    ; following directives. With this process management, there will be
    ; always at least 1 children.
    ; pm.max_children - the maximum number of children that can
    ; be alive at the same time.
    ; pm.start_servers - the number of children created on startup.
    ; pm.min_spare_servers - the minimum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is less than this
    ; number then some children will be created.
    ; pm.max_spare_servers - the maximum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is greater than this
    ; number then some children will be killed.
    ; ondemand - no children are created at startup. Children will be forked when
    ; new requests will connect. The following parameter are used:
    ; pm.max_children - the maximum number of children that
    ; can be alive at the same time.
    ; pm.process_idle_timeout - The number of seconds after which
    ; an idle process will be killed.
    ; Note: This value is mandatory.
    pm = dynamic
    ; The number of child processes to be created when pm is set to 'static' and the
    ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
    ; This value sets the limit on the number of simultaneous requests that will be
    ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
    ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
    ; CGI. The below defaults are based on a server without much resources. Don't
    ; forget to tweak pm.* to fit your needs.
    ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
    ; Note: This value is mandatory.
    pm.max_children = 5
    ; The number of child processes created on startup.
    ; Note: Used only when pm is set to 'dynamic'
    ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
    pm.start_servers = 2
    ; The desired minimum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.min_spare_servers = 1
    ; The desired maximum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.max_spare_servers = 3
    ; The number of seconds after which an idle process will be killed.
    ; Note: Used only when pm is set to 'ondemand'
    ; Default Value: 10s
    ;pm.process_idle_timeout = 10s;
    ; The number of requests each child process should execute before respawning.
    ; This can be useful to work around memory leaks in 3rd party libraries. For
    ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
    ; Default Value: 0
    ;pm.max_requests = 500
    ; The URI to view the FPM status page. If this value is not set, no URI will be
    ; recognized as a status page. It shows the following informations:
    ; pool - the name of the pool;
    ; process manager - static, dynamic or ondemand;
    ; start time - the date and time FPM has started;
    ; start since - number of seconds since FPM has started;
    ; accepted conn - the number of request accepted by the pool;
    ; listen queue - the number of request in the queue of pending
    ; connections (see backlog in listen(2));
    ; max listen queue - the maximum number of requests in the queue
    ; of pending connections since FPM has started;
    ; listen queue len - the size of the socket queue of pending connections;
    ; idle processes - the number of idle processes;
    ; active processes - the number of active processes;
    ; total processes - the number of idle + active processes;
    ; max active processes - the maximum number of active processes since FPM
    ; has started;
    ; max children reached - number of times, the process limit has been reached,
    ; when pm tries to start more children (works only for
    ; pm 'dynamic' and 'ondemand');
    ; Value are updated in real time.
    ; Example output:
    ; pool: www
    ; process manager: static
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 62636
    ; accepted conn: 190460
    ; listen queue: 0
    ; max listen queue: 1
    ; listen queue len: 42
    ; idle processes: 4
    ; active processes: 11
    ; total processes: 15
    ; max active processes: 12
    ; max children reached: 0
    ; By default the status page output is formatted as text/plain. Passing either
    ; 'html', 'xml' or 'json' in the query string will return the corresponding
    ; output syntax. Example:
    ; http://www.foo.bar/status
    ; http://www.foo.bar/status?json
    ; http://www.foo.bar/status?html
    ; http://www.foo.bar/status?xml
    ; By default the status page only outputs short status. Passing 'full' in the
    ; query string will also return status for each pool process.
    ; Example:
    ; http://www.foo.bar/status?full
    ; http://www.foo.bar/status?json&full
    ; http://www.foo.bar/status?html&full
    ; http://www.foo.bar/status?xml&full
    ; The Full status returns for each process:
    ; pid - the PID of the process;
    ; state - the state of the process (Idle, Running, ...);
    ; start time - the date and time the process has started;
    ; start since - the number of seconds since the process has started;
    ; requests - the number of requests the process has served;
    ; request duration - the duration in µs of the requests;
    ; request method - the request method (GET, POST, ...);
    ; request URI - the request URI with the query string;
    ; content length - the content length of the request (only with POST);
    ; user - the user (PHP_AUTH_USER) (or '-' if not set);
    ; script - the main script called (or '-' if not set);
    ; last request cpu - the %cpu the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because CPU calculation is done when the request
    ; processing has terminated;
    ; last request memory - the max amount of memory the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because memory calculation is done when the request
    ; processing has terminated;
    ; If the process is in Idle state, then informations are related to the
    ; last request the process has served. Otherwise informations are related to
    ; the current request being served.
    ; Example output:
    ; pid: 31330
    ; state: Running
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 63087
    ; requests: 12808
    ; request duration: 1250261
    ; request method: GET
    ; request URI: /test_mem.php?N=10000
    ; content length: 0
    ; user: -
    ; script: /home/fat/web/docs/php/test_mem.php
    ; last request cpu: 0.00
    ; last request memory: 0
    ; Note: There is a real-time FPM status monitoring sample web page available
    ; It's available in: ${prefix}/share/fpm/status.html
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;pm.status_path = /status
    ; The ping URI to call the monitoring page of FPM. If this value is not set, no
    ; URI will be recognized as a ping page. This could be used to test from outside
    ; that FPM is alive and responding, or to
    ; - create a graph of FPM availability (rrd or such);
    ; - remove a server from a group if it is not responding (load balancing);
    ; - trigger alerts for the operating team (24/7).
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;ping.path = /ping
    ; This directive may be used to customize the response of a ping request. The
    ; response is formatted as text/plain with a 200 response code.
    ; Default Value: pong
    ;ping.response = pong
    ; The access log file
    ; Default: not set
    ;access.log = log/$pool.access.log
    ; The access log format.
    ; The following syntax is allowed
    ; %%: the '%' character
    ; %C: %CPU used by the request
    ; it can accept the following format:
    ; - %{user}C for user CPU only
    ; - %{system}C for system CPU only
    ; - %{total}C for user + system CPU (default)
    ; %d: time taken to serve the request
    ; it can accept the following format:
    ; - %{seconds}d (default)
    ; - %{miliseconds}d
    ; - %{mili}d
    ; - %{microseconds}d
    ; - %{micro}d
    ; %e: an environment variable (same as $_ENV or $_SERVER)
    ; it must be associated with embraces to specify the name of the env
    ; variable. Some exemples:
    ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
    ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
    ; %f: script filename
    ; %l: content-length of the request (for POST request only)
    ; %m: request method
    ; %M: peak of memory allocated by PHP
    ; it can accept the following format:
    ; - %{bytes}M (default)
    ; - %{kilobytes}M
    ; - %{kilo}M
    ; - %{megabytes}M
    ; - %{mega}M
    ; %n: pool name
    ; %o: ouput header
    ; it must be associated with embraces to specify the name of the header:
    ; - %{Content-Type}o
    ; - %{X-Powered-By}o
    ; - %{Transfert-Encoding}o
    ; %p: PID of the child that serviced the request
    ; %P: PID of the parent of the child that serviced the request
    ; %q: the query string
    ; %Q: the '?' character if query string exists
    ; %r: the request URI (without the query string, see %q and %Q)
    ; %R: remote IP address
    ; %s: status (response code)
    ; %t: server time the request was received
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %T: time the log has been written (the request has finished)
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %u: remote user
    ; Default: "%R - %u %t \"%m %r\" %s"
    ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
    ; The log file for slow requests
    ; Default Value: not set
    ; Note: slowlog is mandatory if request_slowlog_timeout is set
    ;slowlog = log/$pool.log.slow
    ; The timeout for serving a single request after which a PHP backtrace will be
    ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_slowlog_timeout = 0
    ; The timeout for serving a single request after which the worker process will
    ; be killed. This option should be used when the 'max_execution_time' ini option
    ; does not stop script execution for some reason. A value of '0' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_terminate_timeout = 0
    ; Set open file descriptor rlimit.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Chroot to this directory at the start. This value must be defined as an
    ; absolute path. When this value is not set, chroot is not used.
    ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
    ; of its subdirectories. If the pool prefix is not set, the global prefix
    ; will be used instead.
    ; Note: chrooting is a great security feature and should be used whenever
    ; possible. However, all PHP paths will be relative to the chroot
    ; (error_log, sessions.save_path, ...).
    ; Default Value: not set
    ;chroot =
    ; Chdir to this directory at the start.
    ; Note: relative path can be used.
    ; Default Value: current directory or / when chroot
    ;chdir = /srv/http
    ; Redirect worker stdout and stderr into main error log. If not set, stdout and
    ; stderr will be redirected to /dev/null according to FastCGI specs.
    ; Note: on highloaded environement, this can cause some delay in the page
    ; process time (several ms).
    ; Default Value: no
    ;catch_workers_output = yes
    ; Limits the extensions of the main script FPM will allow to parse. This can
    ; prevent configuration mistakes on the web server side. You should only limit
    ; FPM to .php extensions to prevent malicious users to use other extensions to
    ; exectute php code.
    ; Note: set an empty value to allow all extensions.
    ; Default Value: .php
    ;security.limit_extensions = .php .php3 .php4 .php5
    security.limit_extensions = .php .html
    ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
    ; the current environment.
    ; Default Value: clean env
    ;env[HOSTNAME] = $HOSTNAME
    ;env[PATH] = /usr/local/bin:/usr/bin:/bin
    ;env[TMP] = /tmp
    ;env[TMPDIR] = /tmp
    ;env[TEMP] = /tmp
    ; Additional php.ini defines, specific to this pool of workers. These settings
    ; overwrite the values previously defined in the php.ini. The directives are the
    ; same as the PHP SAPI:
    ; php_value/php_flag - you can set classic ini defines which can
    ; be overwritten from PHP call 'ini_set'.
    ; php_admin_value/php_admin_flag - these directives won't be overwritten by
    ; PHP call 'ini_set'
    ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
    ; Defining 'extension' will load the corresponding shared extension from
    ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
    ; overwrite previously defined php.ini values, but will append the new value
    ; instead.
    ; Note: path INI options can be relative and will be expanded with the prefix
    ; (pool, global or /usr)
    ; Default Value: nothing is defined by default except the values in php.ini and
    ; specified at startup with the -d argument
    ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
    ;php_flag[display_errors] = off
    ;php_admin_value[error_log] = /var/log/fpm-php.www.log
    ;php_admin_flag[log_errors] = on
    ;php_admin_value[memory_limit] = 32M
    In php-fpm.conf I have modified the permissions to be 0666 and I am still hitting the no such file or directory. But it is created.
    ls -la /run/php-fpm/
    total 4
    drwxr-xr-x 2 root root 80 Mar 7 13:05 .
    drwxr-xr-x 17 root root 520 Mar 7 10:59 ..
    -rw-r--r-- 1 root root 4 Mar 7 13:05 php-fpm.pid
    srw-rw-rw- 1 http http 0 Mar 7 13:05 php-fpm.sock
    Not getting what I am missing here, can someone help shed some light or smack me in the correct direction. Thanks.
    edit:
    Also verified that it is for sure running in the chroot
    ps -C nginx | awk '{print $1}' | sed 1d | while read -r PID; do ls -l /proc/$PID/root; done
    lrwxrwxrwx 1 root root 0 Mar 7 14:06 /proc/313/root -> /srv/http
    lrwxrwxrwx 1 http http 0 Mar 7 14:06 /proc/314/root -> /srv/http
    edit2:
    I just rebooted the box and was going over everything again to see if I missed anything or anything was not matching the wiki and the only extra info I could dig out of my box was new error in the logs relating to the nginx.pid
    2013/03/07 18:10:41 [notice] 411#0: signal process started
    2013/03/07 18:10:41 [alert] 387#0: unlink() "/run/nginx.pid" failed (13: Permission denied)
    ls -la /srv/http/run/
    total 12
    drwxr-xr-x 2 root root 4096 Mar 7 14:02 .
    d--x--x--x 9 root root 4096 Mar 7 11:07 ..
    -rw-r--r-- 1 http http 4 Mar 7 18:12 nginx.pid
    It appears to have the proper permissions and it is not in /run/
    ls -la /run/nginx.pid
    ls: cannot access /run/nginx.pid: No such file or directory
    Going to try setting it up again on another box to see if I catch what I did wrong on this one, but will be leaving this one as is to make sure I figure out what happened. Is it that my chroot is bad? That is really the only thing I can think of that is really any different than other NGINX installs I have done, which have always been on a Debian based system.
    Last edited by vwyodajl (2013-03-07 18:24:55)

    Might sound stupid, but do you have php-fpm running?
    Means, is there a php-fpm process on your box, and does the socket exist like in:
    └» ps -ef|grep php-fpm
    root 3045 1 0 Mär04 ? 00:00:09 php-fpm: master process (/etc/php/php-fpm.conf)
    http 13534 3045 0 18:22 ? 00:00:10 php-fpm: pool www
    http 13545 3045 0 18:22 ? 00:00:08 php-fpm: pool www
    http 22807 3045 0 19:46 ? 00:00:01 php-fpm: pool www
    tom 27863 28055 0 20:16 pts/1 00:00:00 grep --colour=auto php-fpm
    └» ls -l /run/php-fpm/php-fpm.sock
    srw-rw---- 1 http http 0 4. Mär 22:24 /run/php-fpm/php-fpm.sock
    EDIT: somehow missed your output regarding the php-fpm socket. Ignore above then, I have no idea about chroot, I use LXC.
    Last edited by teekay (2013-03-07 19:24:04)

  • Which BSD would an Arch User like?

    Hey guys,
    I'm thinking of dropping Arch for a while, its starting to restrict me.... I've looked into other distros, nothing seems to appeal at all. So I thought I should round out my Unix education..... I've never used BSD, so I thought I'd try one of those.
    Of NetBSD, FreeBSD, and OpenBSD, which is the one that's going to be most "archesque"? Has anybody had any good or bad experiences with any of these? Which is best for a desktop/development system? Where's a good place to start learning them? How hard is installation and configuration? Are there any other BSD variants I should try?
    Before you flame me, I'm not leaving Arch for good, you know this is my home, I'm just thinking of experimenting a bit... you know, an open marriage sort of thing... Sometimes you need to take a vacation to realize how good home is and stuff. To be honest, I'm a little annoyed with some of the recent changes here. Thought if I tried something else I'd realize how good I had it on Arch. ;-)
    Thanks,
    Dusty

    You could hobble over to http://www.bsdnexus.com where we put together a thing, trying to list the advantages of each BSD.
    As Greg Lehey, author of, "The Complete FreeBSD," has stated, each system's main idea can be found in their slogan.
    FreeBSD (my personal favorite, so keep that in mind as you read).
    The Power to Serve is its slogan. It's probably the fastest on x86 at least, and has a wider collection of ports than any of the others.  It's probably the easiest of them to get working as a desktop, and is probably the most powerful as a server.  If you choose it, start with the 6.0, not the older versions. 
    Most things are compiled from source, which takes awhile.  (This is true for all of them, though there are often precompiled packages available). 
    I'm going to push my page http://home.nyc.rr.com/computertaijutsu/FreeBSD5x.html which has a few tips for Linux users. 
    (I'm writing this from a BSD box actually).
    NetBSD
    Slogan, Of course it runs NetBSD.  It's quite portable, though I think truth be told, last time I checked, Debian had more archs than Net.  Its portability results in a very clean code base.  Fewer packages, a bit slower than Free (imho).  It has its own quirks.
    (I'll push another page of mine, though it's aimed more at the FreeBSD user, http://home.nyc.rr.com/computertaijutsu/netbsd.html )
    OpenBSD is perhaps a bit harder to install and its slogan is something like only one security hole in 10 years.  Its emphasis is on security-it's probably the slowest, and may have the fewest number of ported applcations.   However, many people can and do use it as their desktop.

  • Gnu readline with vi mode change visualization

    After a lot of searching how to get some kind of vi mode indicator working with GNU readline I've decided to hack readline myself. It's working fine for me and because I'm happy archlinux user I've decided to share my findings here, so maybe somebody will find it useful too.
    there is a patch to readline needed - I've created AUR package readline-vi-mode-changed-hook
    additional logic / configuration to provide your visualization
    To not double post what I've already wrote in more detailed way, here is the link to my personal blog where I've documented the whole thing.
    There are however few things still bugging me and maybe somebody will be able to help me with that. The particular thing which I would like to solve is to get escape sequence for changing cursor color working inside screen and tmux. I've found trick for screen but what is expectable is that when switching windows the cursor color is not reset by screen to last color set in particular window. Because cursor color sequence is not really a standard nor part of termcap / terminfo I feel it will not be so easy / possible ?
    Last edited by mirci (2010-10-11 19:26:06)

    Sara wrote:Am using this with GNU screen, and it works great (no change in cursor color, of course, but I think I actually prefer that, as it isn't inconvenient to look at the window title in DWM). Thanks for sharing the patch--I don't know how I ever lived without it
    Well I started with the window title as I use Xmonad, then I realized that looking up or down on screen isn't very convenient for me (mainly because of a big screen I have) but it's still fine, so I was thinking about visualization which would be closest to the prompt location, cursor color was natural choice however it is not very reliable in terminal multiplexers and in general. The latest and my favorite now is the change of prompt itself (eg. bold version).
    Anyway thanks for feedback, firstly when published this I thought nobody is using VI mode with readline judging based on almost no feedback at all. It's cool that at least somebody found this patch useful .
    lavandero wrote:
    Would you be interested in porting this to NetBSD editline (libedit)?
    Open/FreeBSD also use it, just in case that qualifies as incentive.
    I don't use any application which uses editline. I know it just in the meaning that it is implementing similar functionality as readline do. I guess then some applications usually can be compiled with readline or editline (if author thinks it can be useful based on different licenses and so on) ... does the *BSD systems do it that way ? Anyway I have editline in my mind if I would maybe implement some application where I would need readline functionality. Readline is fine but to be honest I found the source code of it not very nice. So to your question ... as I'm not user of the editline so far I am not planing to port this patch there anytime soon.
    Just out of my curiosity which let's say well known applications can be compiled against readline and editline, is it out of box provided by upstream or usually patches are done for it. How it works in *BSD then ? In my archlinux box I frequently use mainly 2 readline applications (bash, i/python).

  • Real HW S-ATA Raid card support in Solaris 10 x86?

    I am trying to find an SATA RAID controller (real HW raid, not the
    pseudo raid that comes on many mb) that works with Solaris 10 on x86.
    I thought maybe the LSI MegaRAID SATA 150-4 might. Solaris has an amr
    driver ported from FreeBSD according to the Solaris amr man page as
    well as some webpage at Sun. This card is supported with the amr
    driver on FreeBSD. However, the card is not correctly identified by
    Solaris 10 at install time. There is also an LSI driver for download
    for the MPT Fusion stuff and this card supposedly adheres to that
    architecture family but it also does not work (I did it as an ITU
    install addition).
    I am also wondering about the LSI MegaRAID SATA 300x-8 card. There is
    something in the LSI supplied itmpt driver that shows an 8-port
    SAS/SATA controller support but I am not sure if this one is it as I do
    not have the card.
    I am also wondering about the Adaptec 2410SA or 2810SA cards. On
    FreeBSD they are supported by the aac driver and Solaris has an aac
    driver that is ported from FreeBSD. Anyone have any experiences with
    these?
    The Areca 11x0 series has a Solaris (not yet bootable) driver from the
    factory (they emailed me a copy). I would prefer a bootable driver
    since my server only has the disks for the RAID (mirror plus hot swap).
    Any others that I need to look at ?
    Alternatively, how to coerce the system (by changing stuff :-) to recognize under the existing mpt / amr the LSI MegaRAID SATA 150-4 at boot time from CD during an install. It shares the PCI id of 1000 (PCI1000) but the subid (after PCI1000,) is different than the SCSI brethren that are supported
    Thanks
    Chad

    I'm trying to find a RAID SATA controller to use with Solaris 10 too....did you have any luck?

  • Realm authentication not working for usergroups

    Hi...
    I have a server running 10.4.3 (8F46). I'm running one web site, and also some AFP shares. This server is bound to our corporate Active Directory server.
    I'm positive the AD integration works because my AFP shares use AD users and groups for their permissions. All but one AFP share uses an AD group for permissions. AD users are in an AD group, and they can log in to the share. It works.
    Anyways.... I want my one web site to be protected, and I'd like only one AD group to be able to access it. I am familiar with Apache from FreeBSd and OpenBSD. In ServerAdmin, I created a web site, and it works. I then created a realm, and added one AD user to the users pane. From the browser, I can connect to the web site after I authenticate as the AD user (annoyingly, I have to prepend my AD domain and a backslash to my username). My AD user can connect and view the web page.
    When I add an AD group to the groups pane, none of the member users can authenticate properly. If I remove the above user from the user pane, and add a group (containing said user) to the group pane, that user can no longer log in.
    I've consulted the 10.4 server documentation; the WebServices pdf does not get into details with realm authentication, and covers it mostly in conjunction with WebDAV.
    I find it odd that an AD user can connect when specified as a user entry, but not from within a group. It's almost as if authenticating to AD groups is broken in Apple's implementation of Apache.
    Has anyone else set up authentication with websites? Ever done it with Active Directory?
    Thanks
    /eric

    This is not limited to Active Directory as I have been unable to use groups for realm authentication with OpenLDAP either (on 10.3.9).
    I assumed it would be fixed in 10.4 but I see it has not.

  • Help with aspx files

    This is not a Dreamweaver  problem but I fugured someone on thi site would have the solution. Its been driving me crazy for too long and just want to get the solution. When click on links on two sites that are aspx dirven the link attempts to dowload a FileDelivery.aspx file  Sometimes its a page its trying to serve up or its a PDF.  Now these are majore sites. One is my HR benfits page and another is my bank. I cannot find a solution. On my bank site it should serve up a pdf file and it won't. So the issue in on my end. I have IE and firefox.

    Welcome to Apple Discussions:
    The aspx file extension is for Microsoft Net. See here:
    http://filext.com/file-extension/ASPX
    It indicates that DreamWeaver might be able to open them.
    There is some hope, however because the above link does state:
    ProgramName MIMEType
    Active Server Page Extended
    Found in Multiple GNU/Linux Packages
    Found in Some FreeBSD/NetBSD Packages
    Perhaps some heavy dogpiling might turn up some BSD apps that will workl

Maybe you are looking for

  • Is it possible to use single quotes in a String

    Can we use single quotes and comma in side a string variable... Eg: String s=" a ' , ' b "; why am i asking was...... when this variable is sent to database, the table automatically recognizes the beginning single quotes and end single quotes to retr

  • Is anyone having difficulties with the new yahoo mail and mac 10.8.5?

    I am using an older intel based imac desktop...it is updated to 10.8.5    I use Safari to browse.   I use Yahoo for my email.  I know...don't say it.  Please.  LOL Anyway, it seems that Yahoo has changed their email system (again) and I am having all

  • Problem with the order of colums in query

    Hi! We work with SAP 2007 and patch 44. When we want to do a query, in the result, the colums aren't in same order that I have defined in the query. Someone have already met the same problem? Thank you to take in consideration my problem Best regards

  • My movies won't play. you can hear them but not watch

    Ok any video i put on my ipod 5th gen won't work. i can press play on it it will play the audio of that movie but not the video it just shows the artwork of that movie thats it. Help pleaseeeeee?

  • Pages won't show up in the area of iTunes where files are transferred.

    I want to pass Pages docs from my iMac to my iPad via iTunes and the sync cable but Pages doesn't show up in the bottom area. Only thing I'm thinking is that I have the box checked that allows the Cloud to sync with all my Pages documents. Could that