Oracle8i with Crystal Report 8 and ASP

Hai there
am new to Oracle8i.
am using Crystal Report 8 and 8.5, Windows NT, IIS, Oracle8i.
i created a simple query report in Crystal report 8 and coded a
asp todisplay at client browser but i cant view the report.
the CRviewer controle is displayed but no report
error:
Server has not yet been opened.
please help me
thanking you
raj

CR was released well before .NET framework 3.5. Mo test would have been done. Only option is to not install 3.5 or upgrade to CR 2008 which supports 3.5 framework. Also will require you to update your app to ASP.NET.

Similar Messages

Query Engine report error with Crystal Report 9 And MS SQL SErver 2000

Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...

Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...
Refer the above statement highlighted in BOLD. That statement is WRONG. Select what ???? Try any one of the below statement,
select ''
--or
select 0
--or
select null
Regards, RSingh

Problem with Crystal Report Viewer and Dual Monitors

Post Author: jtgoff
CA Forum: .NET
Hey Guys,
I'm running into another problem with the Crystal Report Viewer. Here's a little info before I get started, I'm developing a Windows App using WinForms in VS2005 and Crystal 11 Release 2. I'm referencing all the latest Crystal dlls from Service Pack 2 of Crystal 11 Release 2. The problem occurs when I drag my Windows Form that contains a Crystal Report Viewer onto my second monitor and try to scroll or resize it, when I try this the Report Document within the Viewer becomes glitchy, blocky, and un-readable. I drag it back onto my main monitor and perform the same actions and the Report appears perfectly fine. I notice this occurs after a number of Report Previews through my App. Initially when I start my App, I can drag the reports onto my second monitor and resize it and scroll through it no problem. However, after a number of Previews, I notice the problem occurs on my second monitor. This is a very strange bug that doesn't produce an error and appears to happen randomly. I was wondering if anyone has come across this problem, if so... Is there a solution for this?
Thanks in advance!

You can update the parameters using Crystal Viewer 2008. I had the same problem with the "CHANGE" button being grayed out.
Go to your Report -> Select Expert -> and now you have three choices: Record, Group, Saved Data. Put your select statement using your parameters in the Saved Data only (remove it from Record if already there).
It works awesome and even works on dynamic parameters!

Has any body work with Crystal Report XI and JDeveloper 10.1.3 ?

Hi All,
We want to use Crystal Report XI as our reporting tools and integrate it with our jsp/jspx application developed with JDeveloper 10.1.3.
Has any body succesfully done this kind of integration ?
Could you please share it with me ?
Thank you for your info,
xtanto

Hi friends,
I use Crystal Reoprt XI (release 1) with JDev 10.1.3, never try Crystal 10 with JDev.
Here is what I do :
1. Install CR XI on the same machine with JDev 10.1.3.
2. Modify CRConfig.XML on folder : C:\Program Files\Common Files\Business Objects\3.0\java on three places :
<JavaDir>D:\JDev1013\jdk\bin</JavaDir>
<Classpath>D:\JDev1013\jdbc\lib\ocrs12.jar;D:\JDev1013\jdbc\lib\ojdbc14.jar;D:\JDev1013\jdbc\lib\ojdbc14dms.jar;D:\JDev1013\jdbc\lib\orai18n.jar; .... [original classpath]
<JDBCURL>jdbc:oracle:thin:@oracle.sas.co.id:1521:ORCL</JDBCURL>
<JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
<JDBCUserName>myuserid</JDBCUserName>     <JNDIURL></JNDIURL>
3. Create the report using Crystal XI, USE JDBC CONNECTION, and it takes about 12-20 minutes to connect, don'y know why :)
( now the integration part )
4. Create a project for the report in our apps workspace (e.d : ViewController)
5. Copy these jar files below to D:\..\ViewController\public_html\WEB-INF\lib
(I got the files from Crystal Installation)
04/03/2006 09:27 AM 666,774 CrystalCharting.jar
03/26/2006 12:23 AM 2,163 CrystalCommon.jar
04/03/2006 09:27 AM 94,137 CrystalContentModels.jar
04/03/2006 09:30 AM 519,003 CrystalExporters.jar
04/03/2006 09:27 AM 60,468 CrystalExportingBase.jar
04/03/2006 09:26 AM 561,021 CrystalFormulas.jar
04/03/2006 09:26 AM 390,049 CrystalQueryEngine.jar
04/03/2006 09:28 AM 1,934,849 CrystalReportEngine.jar
04/03/2006 09:25 AM 413,455 CrystalReportingCommon.jar
09/08/2003 02:42 PM 3,915,966 icu4j.jar
04/03/2006 09:29 AM 135,232 jrcerom.jar
02/10/2006 10:39 AM 698,542 jsf-impl.jar
03/26/2006 12:23 AM 8,680 keycodeDecoder.jar
05/11/2004 07:22 PM 352,668 log4j.jar
03/26/2006 08:33 AM 474,429 MetafileRenderer.jar
04/03/2006 08:47 AM 369,503 rasapp.jar
04/03/2006 08:46 AM 784,065 rascore.jar
03/16/2006 09:35 AM 699,443 ReportViewer.jar
04/03/2006 09:25 AM 95,381 rpoifs.jar
04/03/2006 08:46 AM 21,128 serialization.jar
06/17/2006 01:41 PM 393,259 standard.jar
10/02/2003 06:29 PM 3,777 URIUtil.jar
02/28/2006 10:01 AM 48,279 webreporting-jsf.jar
03/07/2006 08:50 AM 778,348 webreporting.jar
02/20/2004 02:01 PM 1,010,806 xercesImpl.jar
02/20/2004 02:01 PM 124,724 xml-apis.jar
6. Right click the project, project properties, Libraries, Add Jar / Directories,
Add all the jar files from previous step.
7. Copy CRConfig.XML to folder D:\..\ViewController (project folder)
( this CRConfig.XML is the one that I have not modified, the original one. )
Please check, you must have this on the file :
<reportlocation>.</reportlocation>
8. Then create a Folder e.g : reports under WEB-INF :
D:\..\ViewController\public_html\WEB-INF\reports, then copy all reports created on step 3 on to this folder.
9. create a jsp to call the report, here is sample of my JSP :
<%@ page
contentType="text/html;charset=windows-1252"
isELIgnored="true" %>
<%@page import="com.crystaldecisions.reports.sdk.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.lib.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.exportoptions.*"%>
<%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.reportsource.*" %>
<%@page import="com.crystaldecisions.sdk.occa.report.data.*" %>
<%@page import = "java.util.*" %>
<%@page import = "view.util.JSFUtils" %>
<%@page import = "oracle.jbo.domain.Number" %>
<%
//Use the relative path to the report; the physical or full qualified URL cannot be used.
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/OrderID2.rpt";
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/test2.rpt";
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/invoice.rpt";
String reportName = "../reports/invoice.rpt";
String userName = "myuserid";
String password = "mypassword";
String compId = (String)JSFUtils.getFromSession("compId");
String docId = (String)JSFUtils.getFromSession("docId");
Number noDokumen = (Number)JSFUtils.getFromSession("noDokumen");
String status = (String)JSFUtils.getFromSession("status");
System.out.println("from rptInvoice.jsp " compIddocId + " " + noDokumen.toString()+status);
try
//Open report.
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(reportName, 0);
     session.setAttribute("reportSource", reportClientDoc.getReportSource());
// Conn info
ConnectionInfos oConnectionInfos = new ConnectionInfos();
ConnectionInfo oConnectionInfo = new ConnectionInfo();
oConnectionInfo.setUserName(userName); //Set username and password for the report's database
oConnectionInfo.setPassword(password);
oConnectionInfos.add(oConnectionInfo); //Add object to collection
//Create a Fields collection object to store the parameter fields in.
Fields oFields = new Fields();
// THE PARAMETERs.
//Integer numberValue = new Integer(2166);
//String stringValue = "IV";
//Set all of the parameter values using the utility function.
setDiscreteParameterValue(oFields, "Nomor_Invoice", "", new Integer(noDokumen.intValue()));
setDiscreteParameterValue(oFields, "Kode_Invoice", "", docId);
setDiscreteParameterValue(oFields, "Compid", "", compId);
setDiscreteParameterValue(oFields, "Status", "", status);
//System.out.println("from view-controller report jsp v2.2");
//Set the export options to export to the format of choice.
ExportOptions oExportOptions = new ExportOptions();
oExportOptions.setExportFormatType(ReportExportFormat.PDF);
ReportExportControl oReportExportControl = new ReportExportControl();
oReportExportControl.setExportOptions(oExportOptions);
oReportExportControl.setExportAsAttachment(false);
Object reportSource = session.getAttribute("reportSource");
oReportExportControl.setReportSource(reportSource);
oReportExportControl.setDatabaseLogonInfos(oConnectionInfos);
     oReportExportControl.setParameterFields(oFields);
//Export the report
oReportExportControl.processHttpRequest(
request, response, getServletConfig().getServletContext(), null);
catch(ReportSDKException e)
out.print(e);
%>
<%!
* Utility function to set values for the discrete parameters in the report. The report parameter value is set
* and added to the Fields collection, which can then be passed to the viewer so that the user is not prompted
* for parameter values.
private void setDiscreteParameterValue(Fields oFields, String paramName, String reportName, Object value) {
//Create a ParameterField object for each field that you wish to set.
ParameterField oParameterField = new ParameterField();
//You must set the report name.
//Set the report name to an empty string if your report does not contain a
//subreport; otherwise, the report name will be the name of the subreport
oParameterField.setReportName(reportName);
//Create a Values object and a ParameterFieldDiscreteValue object for each
//object for each parameter field you wish to set.
//If a ranged value is being set, a ParameterFieldRangeValue object should
//be used instead of the discrete value object.
Values oValues = new Values();
ParameterFieldDiscreteValue oParameterFieldDiscreteValue = new ParameterFieldDiscreteValue();
//Set the name of the parameter. This must match the name of the parameter as defined in the
//report.
oParameterField.setName(paramName);
oParameterFieldDiscreteValue.setValue(value);
//Add the parameter field values to the Values collection object.
oValues.add(oParameterFieldDiscreteValue);
//Set the current Values collection for each parameter field.
oParameterField.setCurrentValues(oValues);
//Add parameter field to the Fields collection. This object is then passed to the
//viewer as the collection of parameter fields values set.
oFields.add(oParameterField);
%>
10. have a try and HTH :)
xtanto.

Problem with Crystal Report XI and Regional Settings

Dear All,
I am working on Crystal Report XI under Chinese Windows 2000 Professional and Chinese Visual Foxpro 9.0.
I created a User defined Function Library under VFP9.0 as an ActiveX with a function that return a String. I could saw the function in CR XI and the function works fine when returning English. When the function returning a Chinese String, CR XI gives different result. The Chinese text returned from the function only works when my regional settings (control panel -> regional settings) is set to Chinese Taiwan otherwise it shows "??????".
It is queer, the text object always correct, shows Chinese text, no matter what regional settings is. I did try my best in VFP to convert the string to double byte, unicode, etc but it stilll doesn't work.
Could anyone help me please. Thank you.
Regards,
Antony

If you have the correct font, it will actually say "MS Arial Unicode" in any of the font drop downs - CR Designer, MS Word or any other software. So, you'll have to ensure that the font is installed.
Ludek

ODBC Connectivity with Crystal Reports 2009 and MySQL

Hi,
I'm hoping someone can help me. We are currently running Crystal Reports CR Developer version 9.2.2.693 with an ODBC connection (ODBC 3.51 driver) to a My SQL database, version 4.0.18.*
We want to upgrade to Crystal Reports 2008, CR Developer version 12.0.0.683, however when I try to run reports to the current database, I get the following error:
*Database Connector Error: 2300:[MySQL][ODBC 3.51 Driver][mysqld-4.0.18-nt]You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near .client where 0=1 at line 1 [Database Vendor Code: 1064] *
Has anyone encoutered this before? Do I need to get a different rev. ODBC driver? Thanks in advance for your help.

Thanks for your suggestion, but since the same query works when I use Crytal Reports 9 to the same MySQL database, I don't think that's the issue. I wonder if it has to do with the driver.

VB2005 with Crystal Report XI and MS Access - Database Connector Error:

Post Author: jvaldeziii
CA Forum: .NET
"Database Connector Error:"
does anybody there whose got an idea with this problem?
Im using VB2005 and im trying to show a report using CR XI with a Ms Access database...
Whenever i used a CRAXDRT.Report.SQLQueryString? my application has an error "Database Connector Error"
but whenever i omit this single line of code CRAXDRT.Report.SQLQueryString?
crxReport.SQLQueryString = "Select * from tblPersonal where EMP_ID like '0%'"
Or either i replace it with a CRAXDRT.Report.RecordSelectionFormula?
crxReport.RecordSelectionFormula = "{tblPersonal.IDNo} like '*'"
it works fine and it show the report and data...
But?? i have to use more flexible filter condition like "SQLQueryString" like using LEFT OUTER JOIN or even just a simple query string in sql query...
but using "SQLQueryString" gives me a head ache to figure it myself... I got this frustrating error in my application... "Database connector error"
thats why i need help... please anybody has a good idea to resolve this problem "Database connector error" please refer to my code if there's something missing or lacking in my code...
Here's my sample code:
Private Sub frmCrystalReport_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Try
ChildFormAutoSizeFit(Me)
Me.Cursor = Cursors.WaitCursor
Me.MdiParent = frmMain
crxApp = New CRAXDRT.Application
crxReport = crxApp.OpenReport(reportPath & "\EmployeeRecord.rpt", CrystalDecisions.Shared.OpenReportMethod.OpenReportByDefault)
crxDataBase = crxReport.Database
crxTables = crxDataBase.Tables
For Each crxTable In crxTables
crxTable.Location = DataSource
crxTable.SetLogOnInfo("Provider=Microsoft.Jet.OLEDB.4.0;Data source=" & reportPath, "myEmpDB.mdb", "UserName", "myPassword")
Next crxTable
'Note1: this line crxReport.SQLQueryString gives me the headache "Database Connector Error"
crxReport.SQLQueryString = "Select * from tblPersonal"
'Note2: this line crxReport.RecordSelectionFormula works fine
'crxReport.RecordSelectionFormula = "{tblPersonal.IDNo} like '*'"
AxCRViewer1.ReportSource = crxReport
AxCRViewer1.ViewReport()
crxDataBase = Nothing
crxTable = Nothing
crxTables = Nothing
crxReport = Nothing
crxApp = Nothing
Catch ex As Exception
MsgBox(ex.ToString())
Finally
Me.Cursor = Cursors.Default
End Try
End Sub
Please anybody there who can resolve this problem or even just a good idea to share?? Please...
A lot of appreciation to someone or anybody who can help with this... thanks in advance....

Post Author: Argan
CA Forum: .NET
You may want to move/ask this question in the "Other" sdk forum since this is not the CR.NET SDK, but actually RDC/COM SDK.
You are using the RDC in .NET, which is unsupported/untested so there is no way to know if it is a .NET specific issue or an issue with the RDC.
One of the COM folks may be of more help in that forum.
Good luck with your project.

Detail sections not displayed with Crystal Reports 2010 Runtime (SP1 also)

I have migrated a VB app from RDC 9 to Crystal Reports 2010 and I'm experiencing a very strange issue.
In a report with 6 nested groups, the detail part is splitted in 7 section, and the whole detail has the "keep together" flag activated. At runtime, some detail sections are not displayed. There is no suppress condition on the detail section. The missed sections are those near bottom of the page. I suppose that when there is no room to print the section on the page and it should go on the next page, Crystal forget to display it.
I exported the report in Crystal format and reopened with Crystal Reports designer and the missed section are displayed.
The same report is displayed correctly using RDC 9.
If I show the group tree and select the missed section group, the section is correctly displayed on a separate preview page.
I've some screenshot to better demonstrate the problem.
I hoped SP1 will resolve the issue but unfortunately it didn't.
Pier Alberto Guidotti

This issue has been escalated for a fix. tracking number is TE5000325237. For anyone wanting to attach to this thread with a similar issue, please note the behavior as decribed in the TE below. If the description does not match your issue exactly, please create a new thread.
Description - Steps to Reproduce;
1) Run the report in the CR 2008 designer - note the second page
2) Run the report in VS2010 app using CRVS2010 SP1:
CrystalReportViewer1.ReportSource = <path to report>
3) Look at page 2 and compare to page 2 from the CR2008 designer (also, see attached compare.jpg file which is a screen shot of both views) - note missing group on page 2
4) Export to PDF, DO, RTF - same issue
5) Print to printer using the viewer print button - same issue
6) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
crReportDocument.PrintToPrinter(1, 1, 1, 2)
        MsgBox("Done")
7) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
Dim rcd As ISCDReportClientDocument
        rcd = crReportDocument.ReportClientDocument
        rcd.PrintOutputController.PrintReport()
        MsgBox("Done")
8) Export to RPT file format - view this export in the CR2008 Designer - report looks as it should
9) Add report to the .NET2010 project. trying to view the repor tin the .NET2010 IDE results in .NET crashing.
- Ludek

Crystal Reports export and print fails with SSL / https but works with http

Windows 2008 Server, 32-bit (IIS7)
ASP.NET 2.0
Ajax 1.0
Crystal Reports version 10.5.3700.0
http: printing works, export works
https: printing not working, only export to MS Excel and MS Word work.
I am able to generate reports using both http and https, and the toolbar icons are all showing. However, I am unable to print or export properly with SSL.
Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
A communication error occured. Printing will be stopped.
Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL. Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7? Everything works fine when I change the address from https to http.
Please let me know if I can help by providing further information. We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
Thank you.

Thanks Ludek. I got it by searching KB number.
Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting. I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
1: Crystal report export
            Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to PDF : nothing happened.
2: Print:
            Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
Please advise.
Thank you very much!

Problem with Crystal reports for Eclipse and Postgres-databases

Hi,
Is there a known problem when using a PostgreSQL-database to create a report with Crystal reports Plugin? When I drag a table, then occurs a error-windows, that the object can't created.
I have found a workaround for solving the problem. After new installing Eclipse Platform Version: 3.4.1 Build id: M20080911-1700 and Crystal reports Plugin 11.8.6.v1371 with JRE 1.6.0_01 the error message allways occurs, when I select a table from a PostgreSQL database (Version 8.2). After restarting eclipse you see the last selected tables in the field explorer and you can drag the table fields in the report. A repeated choice of the same table causes aliases for the table in the field explorer after restarting eclipse.
Error.log:
eclipse.buildId=M20080911-1700
java.version=1.6.0_01
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Command-line arguments: -os win32 -ws win32 -arch x86
Error
Tue Dec 16 14:03:53 CET 2008
Verursacht durch: java.lang.IllegalArgumentException
com.businessobjects.crystalreports.designer.core.ReportException: java.lang.IllegalArgumentException
at com.businessobjects.crystalreports.designer.core.ExceptionFactory.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.ExceptionFactory.create(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.data.TableElement.add(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.AddCommand.doCommand(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.C(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.CoreCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(Unknown Source) at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.runtime.Platform.run(Platform.java:880)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:455)
at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:257)
at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method) at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:362)
at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:288)
at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:171)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.IllegalArgumentException---- Error code:-2147467259 Error code name:failed at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source) at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
Best Regards
Arnold

Your issue appears to be a Crystal Reports for Eclipse report designer thing, and not a JRC runtime thing. The JRC runtime does support Type 4 JDBC drivers, but all modern PostgreSQL drivers are Type 4.
The current report designer is more restrictive than the JRC runtime - and PostgreSQL, being not on the supported platforms list, has never been tested with the embedded designer.
Unless there's anybody out there with experience with PostgreSQL and CR4E designer, who would be willing to share their experiences.
Sincerely,
Ted Ueda

Creating OLAP report with Crystal Reports and SQL Server Analysis Services 2005

Post Author: orahc_mao
CA Forum: Data Connectivity and SQL
Hi!
I am currently using the trial version of the Crystal Reports XI and I wanted to do an OLAP report. The problem is I cannot select a cube using "OLAP Connection Browser" (the popup window). I already selected Microsoft OLE DB Provider and entered the server name but still can't connect.
I don't think the problem is with SQL Server Analysis Services (2005) since Microsoft Excel - Import Data can detect the server as well as the cube I have created.
I also tried the "Database Expert" of Crystal Reports, created an OLE DB (ADO) connection with "OLE DB Provider for OLAP Services 8.0" driver, entered the server name, checked the integrated security and then I can readily select the database created at SQL Server Analysis Services. However, I still need the OLAP grid create the report but it goes back to my original problem... selecting a cube.
I hope somebody would help me with this issue.
Thanks a lot!
orahc_mao

Hello,
I don't recognize those variables as CR ones so it's likely something the original developer is setting in code.
You'll have to discuss with that person.
If your have SDK issues then post your question to one of the .NET or Java SDK forums.
Thank you
Don

Converted to Crystal Reports 2008 and now have an issue with deployment

Post Author: lwager
CA Forum: Deployment
I have converted my application to Crystal reports 2008 and I have that as a prerequisite in my set up program but everytime I try to install the software package on the client's machine I get this error when it is trying to install Crystal Reports
Verifying file integrity of C:\DOCUME1\lauriew\LOCALS1\Temp\VSD1B7B.tmp\CrystalReports 12.0\CRRuntime_12_0_mlb.msiWinVerifyTrust returned 0File trustedError: Setup has detected that the file 'C:\DOCUME1\lauriew\LOCALS1\Temp\VSD1B7B.tmp\CrystalReports 12.0\CRRuntime_12_0_mlb.msi' has changed since it was initially published.
Does anyone know why I am getting this error? Thanks in advance for your help.

I'm having the same problem ! Can someone help me with this problem ????

J2EE, RAS, JRC, and everything to do with Crystal Report XI

Hello,
We are actually trying to make the JAR files provided with Crystal Reports XI Developper Edition.
The goal is to be able to generate a .rpt file based on some RAW data that we will collect from our iSeries Server, therefore giving the .rpt equivalent of the text-only report created with our application on i5/OS.
For the moment we don't care about interfacing the data from the text-only proto-report on the iSeries, we just care about modelling the instance of an .rpt file in Java.
The trouble is that we manage to create the object with ReportClientDocument newDoc = new ReportClientDocument(), but then the newDoc instance of this object is not accessible (the method .isOpen() returns false).
We also tried to open an existing .rpt file with the same methods to no success.
If anyone has any idea, or lead that could allow us to work our way through this wretched APIs, I would be very grateful.

I'm not referring to Servlet threading issues.
I'll clarify.
You have two threads, both entering ReportClientDocument.open(...) method.
Thread 4 is waiting to acquire 'com.crystaldecisions.reports.queryengine.av@15214b9'
Thread 0 is waiting to acquire ''com.crystaldecisions.reports.queryengine.av@12e0415'
So I'm thinking ??? are they the same objects?
My specific question concerning the ReportClientDocument is that both are calling open - i.e., trying to open a new report. You wouldn't be trying to open different reports using the same ReportClientDocument - so was wondering if you've cached the RCD and trying to open two different reports at the same time on the same instance via different threads.
You'd normally tie a ReportClientDocument instance to a HTTP Session, to ensure each user gets their own copy.
Sincerely,
Ted Ueda

How to work with crystal reports and boe3.1

Hello!!! Forums,
Please suggest me some tutorials and sample code to work with crystal reports that can be viewed in boe3.1. What software to use to deveelop reports? How to view it in boe3.1?
Regards,
grace

At the top of the forums you will see posts that say read this first, read those first.
[BOE Enterprise|Read Before Posting - Where to find Business Objects .NET SDK Resources;
[Crystal Reports .NET|Read Before Posting - Where to find Crystal Reports .NET SDK resources;
Jason

Documents and threads to start with Crystal reports with BI

Hi,
I am a BI consultant and searching for documents and threads to gain knowledge on Crystal reports .Could any one pls send me the pointers for the same...
Kindly do the needful
Points are assured.
Thanks
James

You are in the right place for Crystal Reports and you may also want to look in the BI Forums.
A good place to start is the Help file for Crystal Reports Designer and download our sample reports. They don't use B1 as the data source but it will help to see how to use CR.
You need to specify specific questions and "how to's". Books have been written on how to use Crystal reports which is beyond the scope of this forum on one post.
Thank you
Don

Oracle8i with Crystal Report 8 and ASP

Similar Messages

Maybe you are looking for