Oracle9i AS Reports Server Installation - Service Failed to start

Hi All,
I have installed Oracle9i Apps Server on Win 2000. Installation was successful and the forms are configured correctly but REPORTS SERVICE FAILED TO START. Everytime, I try to start Rerports Service, it fails and the following lines are written to the REP60_Server.Log file in [OracleHome]/REPORT60/Server directory,
*** 2002-04-29 09:24:48 -- Server is starting up.
*** 2002-04-29 09:24:48 -- Daemon failed to listen to port
Does anyone has any idea of what is going on? Your help will be very much appreciated. Thank you.
Regards
The Oracle Reports Team
http://otn.oracle.com/

Have you made any changes to the TNSNAMES.ora in ORA_HOME/NET80/ADMIN using NET8. If you did, usually it screws up the entry for reports server because it is not the standerd format. Check the Report_server entry manually then try starting up reports server.
Hope this helps
Peace

Similar Messages

Server Locator Service Failed to Start

Received Event ID:4380 on single Exchange Server (once part of a DAG but no more - removed other servers and the DAG). Error reads: 'net.tcp://huntsvr.huntelectric.local:64337/Exchange.HighAvailability'. Error A TCP error (10013: An attempt was made to access
a socket in a way forbidden by its access permissions) occurred while listening on IP Endpoing=0.0.0.0:64337.
The above error is paired with the following error as well:
Event ID: 2121. The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions ..."
The above two errors are joined by this error:
Event ID: 4383. Microsoft Exchange Server Locator Service communication channel faulted. State: Faulted
And the next error appears as well:
Event ID: 4379. Microsoft Exchange Server Locator Service stopped.
These 4 errors repeat every minute. Any suggestions of where to find a resolution?
Thanks,
Michael

Hi Michael,
The above errors indicate the following two things:
1. An existing service is using port 64337.
2. Port 64337 is blocked by firewall.
I recommend you use the commands below to check if port 64337 is used by a program.
netstat -aon | findstr "64337"
tasklist | findstr "64337"
What's more, here is a thread for your reference.
Exchange 2010 SP3 RU1 event id 4380 and 4383 logged every minute
http://social.technet.microsoft.com/Forums/exchange/en-US/892721dc-f2cc-45da-ba5f-b24a9a2ef749/exchange-2010-sp3-ru1-event-id-4380-and-4383-logged-every-minute
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

IPod Service Failing to Start and Priveleges

Before
When iTunes 6.whatever was out, my iPod did not work at all, but I continued using iTunes for music.
iTunes 7
I plug my iPod in and got the common message "iPod is corrupted. Press restore to restore it", etc. It never works.
Why it doesn't work
It brings the message "Servie 'iPod Service' failed to start. Verify that you have sufficient privledges to start system services"
Any help? How do I get these 'priveleges'?
? Windows XP

I had been experiencing this error for a long time since iTunes 7 released. I tried different ways to resolve it. Untill today, I found a possible resolution and sucsessfully install iTunes 7.3.1.3. I think that might be helpful.
First, remove all previrous itunes and install the lates t release. You will stuck when trying to start iPod service. Open c:\program files\iPod\bin. You will see iPodService. Double click it. If you got an error about a .dll file (mine is setupapi.dll), remember it and you can continue....
2nd, put xp disk in dvd/cd-rom. Open C:\WINDOWS\system32 and locate the .dll file and rename it. This moment, your cd is running trying to rebuild the dll file just renamed.
3rd, when cd-rom stop running. Retry to start service again. Good luck, I hope you can resolve it.
I checked some microsoft KB for this error. This might happen when xp system been customized or dll file corrupted.

SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid

Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

The report server installation is not initialized. (rsReportServerNotActivated) (rsRPCError) Problem

hi all,
I just installed the reporting service and was configuring it.. and when i try to access it via the browser i get the following error :
"The report server installation is not initialized. (rsReportServerNotActivated) (rsRPCError)"
When i go to the configuration tool i see the initialized tab greyed out with an X. How can i fix this problem ?
Please help, i am open to ideas.

I cant get into it..
when i click on the initialize tab it goes no where.. since its greyed out.
This is what my rsreportserver:
<Configuration>
    <Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAPMlqBjowR0Wc2PsZTt8ubgQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAAANmAACoAAAAEAAAAKuZ9/RkgkVVFff8TowDacEAAAAA
BIAAAKAAAAAQAAAAYydq6zu5Vw/UKFYwQOsI8RgBAAC+zTe1u8S4v+Jr08+s9SEZiAUHrwpnpGMf
04ooFOQisqo7rVO5s7CRu2y81LGigD/AJY/gYJ7oGVui8NlMRYcPwqWp7152Foz4nmNVxbvI3Drd
hAN4k3Loi2NHXR8sP7wmBeOTDHenMR+5A0KcqXzf2q9w30wFpiC6qC7TR4ogCcDWGwCKw9UT6sMU
7WzPEtver6oMgGJYN6Otm0qf1hEEEZ8BGKzFRC3CWmm7lMi60EGIng53k/3QSu5UJ2P7J4S3dTor
eITJIfLTt+k/sRJn1gkrMP6PUGfuaAsl79AjOiDSaeluxWo/jqVwNJcKjHEpIQlaSBBOV/vD3Q1A
scKlYsUXh2lARG/AGvlS/+tWuDfF7H16eX5VFAAAAPX9eFGdbE4J/YNa1wqJn7XRfaC+
</Dsn>
    <ConnectionType>Default</ConnectionType>
    <LogonUser></LogonUser>
    <LogonDomain></LogonDomain>
    <LogonCred></LogonCred>
    <InstanceId>MSSQL.3</InstanceId>
    <InstallationID>{5dab2548-1d82-4cdf-85d8-febe60944ed7}</InstallationID>
    <Add Key="SecureConnectionLevel" Value="0"/>
    <Add Key="ProcessRecycleOptions" Value="0"/>
    <Add Key="CleanupCycleMinutes" Value="10"/>
    <Add Key="SQLCommandTimeoutSeconds" Value="60"/>
    <Add Key="MaxActiveReqForOneUser" Value="20"/>
    <Add Key="DatabaseQueryTimeout" Value="120"/>
    <Add Key="RunningRequestsScavengerCycle" Value="60"/>
    <Add Key="RunningRequestsDbCycle" Value="60"/>
    <Add Key="RunningRequestsAge" Value="30"/>
    <Add Key="MaxScheduleWait" Value="5"/>
    <Add Key="DisplayErrorLink" Value="true"/>
    <Add Key="WebServiceUseFileShareStorage" Value="false"/>
    
    
    
    <Add Key="WatsonFlags" Value="0x0428"/>
    <Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException"/>
    <Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException"/>
    <Service>
        <IsSchedulingService>True</IsSchedulingService>
        <IsNotificationService>True</IsNotificationService>
        <IsEventService>True</IsEventService>
        <PollingInterval>10</PollingInterval>
        <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
        <MemoryLimit>60</MemoryLimit>
        <RecycleTime>720</RecycleTime>
        <MaximumMemoryLimit>80</MaximumMemoryLimit>
        <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
        <MaxQueueThreads>0</MaxQueueThreads>
        <UrlRoot>http://oneilreports/reportserver</UrlRoot>
        <UnattendedExecutionAccount>
            <UserName></UserName>
            <Password></Password>
            <Domain></Domain>
        </UnattendedExecutionAccount>
        <PolicyLevel>rssrvpolicy.config</PolicyLevel>
        <WebServiceAccount>NT AUTHORITY\SYSTEM</WebServiceAccount>
        <IsWebServiceEnabled>True</IsWebServiceEnabled>
        <FileShareStorageLocation>
            <Path></Path>
        </FileShareStorageLocation>
    </Service>
    <Extensions>
        <Delivery>
            <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <FileShareConfiguration>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                    </FileShareConfiguration>
                </Configuration>
            </Extension>
            <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <RSEmailDPConfiguration>
                        <SMTPServer></SMTPServer>
                        <SMTPServerPort></SMTPServerPort>
                        <SMTPAccountName></SMTPAccountName>
                        <SMTPConnectionTimeout></SMTPConnectionTimeout>
                        <SMTPServerPickupDirectory></SMTPServerPickupDirectory>
                        <SMTPUseSSL></SMTPUseSSL>
                        <SendUsing>2</SendUsing>
                        <SMTPAuthenticate></SMTPAuthenticate>
                        <From></From>
                        <EmbeddedRenderFormats>
                            <RenderingExtension>MHTML</RenderingExtension>
                        </EmbeddedRenderFormats>
                        <PrivilegedUserRenderFormats></PrivilegedUserRenderFormats>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                        <SendEmailToUserAlias>True</SendEmailToUserAlias>
                        <DefaultHostName></DefaultHostName>
                        <PermittedHosts></PermittedHosts>
                    </RSEmailDPConfiguration>
                </Configuration>
            </Extension>
            <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
            <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <DocumentLibraryConfiguration>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                    </DocumentLibraryConfiguration>
                </Configuration>
            </Extension>
        </Delivery>
        <Render>
            <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.XmlDataRenderer.XmlDataReport,Microsoft.ReportingServices.XmlRendering"/>
            <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
            <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering"/>
            <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageReport,Microsoft.ReportingServices.ImageRendering"/>
            <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PdfReport,Microsoft.ReportingServices.ImageRendering"/>
            <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RemoteGdiReport,Microsoft.ReportingServices.ImageRendering" Visible="false" LogAllExecutionRequests="false"/>
            <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" LogAllExecutionRequests="false"/>
            <Extension Name="HTML3.2" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html32RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
            <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
            <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
        </Render>
        <Data>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
            <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
            
            
        </Data>
        <SemanticQuery>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>False</EnableMathOpCasting>
                </Configuration>
            </Extension>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>True</EnableMathOpCasting>
                    <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
                    <EnableUnistr>False</EnableUnistr>
                    <DisableTSTruncation>False</DisableTSTruncation>
                </Configuration>
            </Extension>
            <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
        </SemanticQuery>
        <ModelGeneration>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
            <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
        </ModelGeneration>
        <Security>
            <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
        </Security>
        <Authentication>
            <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
        </Authentication>
        <EventProcessing>
            <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
                <Event>
                    <Type>ReportHistorySnapshotCreated</Type>
                </Event>
            </Extension>
            <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
                <Event>
                    <Type>TimedSubscription</Type>
                </Event>
            </Extension>
            <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
                <Event>
                    <Type>SnapshotUpdated</Type>
                </Event>
            </Extension>
        </EventProcessing>
    </Extensions>
</Configuration>
any ideas.

THE REPORT SERVER INSTALLATION IS NOT INITIALIZED (rsReportServer NOT ACTIVATED)

HI ,i had my report server on SQL SERVER 2005,and for
reporting service i am using the sql server reporting services 2008R2,i created a report which i am supposed to display in Website ,i
created the rdl using the BIDS 2008 and , its throwing me an error because my report server is in 2005 and my rdl is in 2008 and i was using it in VS2008 Report viewer control,i was told that i am supposed to create rdl in 05 in order to get
it run ,but i dont want to create another one since it was pretty big and took lot of time to design it
Is there any way i can use the same rdl with that report server ,one of my collegue told that i can do in one way (using catalog of SQL server 2008 Reporting in sql server 2005 report server database i did'nt get that much as iam not aware of that
catalog stuff .and i tried to configure the report server once again and i am getting this new error
THE REPORT SERVER INSTALLATION IS NOT INITIALIZED (rsReportServer NOT ACTIVATED)
in ssrs 2005 there initialize but in ssrs2008 r2 i couldnt found that option so can any one please help me out with this .
thnaks in advance

GO TO report server configuration and go to Encryption keys and delete encryption keys and try to run the URL again, it works.
I had SSRS2008 two installations, the second one gave this problem, this solution helped resolve it. Thank you.

I'm installing the newest itunes 64 bit on my win 7 64 bit professional os. using the itunes installer it loads itunes part way and then i get an error message saying that bonjour service failed to start. i cant get itunes any further. i have to back out

I'm installing the newest version of Itunes over the last version on my laptop. win 7 pro os. it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services. I can't retry, ignore only cancel which un-installs all that it has installed and reverts me to the last version which i had. any idea?

it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services.
Sometimes we can get past that one by disabling the Bonjour Service prior to the install.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try another iTunes install. Does it go through properly this time?

SQL 2012 R2 - SSRS with the Report Server Web Service URL, can't access

Hello:
I am installing Dynamics CRM 2013. When I am on RS Configuration manager; I am running into the SSRS (SQL 2012 on Server 2012)SQL issue, can't access the
http://servername/:80/ReportsServer or
http://servername/:Reports web pages
The database server has SSRS native mode installed, it is using a domain account for the service credentials. This account also has permission to log on a service in the GPO
Account is a domain admin and is a local administrator
SQL server is 2012 R2 on Windows Server 2012. User base is less than 60 people and they have SharePoint 13 on the same SQL server. Server more than enough resources.
Any assistance would be appreciated.
Thanks..Dan

Hi DCas1,
According to your description, you could not access
http://servername/:80/ReportsServer or http://servername/:Reports web pages from Reporting Services configuration manager, SSRS in configured in native mode and the account you used is a local administrator.
In Reporting Services, URLs are used to access the Report Server Web service and Report Manager. Before we can use either application, we need to configure at least one URL each for the Web service and Report Manager. If we are using the Reporting Services
Configuration tool to create or modify the URLs, we can accept the default values for a URL or specify custom values. When we create a report server URL, we must specify the following parts: Host name, port and Virtual directory. In order to improve the efficiency
of troubleshooting, I need to ask several questions:
Since the default URL is http://<computername>/reportserver, did you type the URLs manually? or the URLs configured in Reporting Services configuration manager are
http://servername/:80/ReportServer and
http://servername/:Reports?
Could you provide detailed information of error log(default location: %programfiles%\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles)?
For more information about Configuring a URL, please refer to the following documents:
http://msdn.microsoft.com/en-us/library/ms159261(v=sql.110).aspx
http://msdn.microsoft.com/en-us/library/bb630447(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

HT1926 Installation fails because Apple Mobile Device Service failed to start?

When I attempted to update ITunes, it failed at the starting services point because "Apple Mobile Device Service failed to start". The ignore button would not work. Retry did not fix it. I have deleted all ITunes from my computer, restarted, and attempted a new install. Same problem. Help.

The frequently suggested repair steps listed in comments at http://support.apple.com/kb/HT1923 and http://support.apple.com/kb/HT1926 did not work for me yesterday when I attempted for an entire day to fix this commonly reported problem with the newest iTunes update. I now realize that I overlooked one step listed in http://support.apple.com/kb/HT1923.
My computer has a Windows 64 bit operating system. I should have paid attention to this instruction:
"If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\ "
Tonight, I removed those previous version files from the Program Files (x86) directory and executed the rest of the steps listed. Success resulted. If you are struggling like I did to install the iTunes newest update on a Windows 64 bit operating system, you might benefit to recheck that you followed the instruction listed above.

ITunes 9.0 install problem: iPod service fails to start, installer quits

Hi,
I tried to upgrade my iTunes from 8.XXX(I think it was latest 8) to 9.0 but run into this problem where the installer tries to start the iPod service and fails. The installer can not continue any more and it has to be rolled back. I uinstalled 8.xx and tried again but same result. I also tried the suggestion in another thread about stopping the AppleMobileDevice service and removing the folder but it did not help. This is the error message:
"Product: iTunes -- Error 1920. Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services."
I am logged in as the admin so I do have sufficient privileges.
Is any one having the same problem? How do I make it work? I am using Win XP-Pro SP3 32bit.
Thanks
null

katkeys12 wrote:
I also unistalled the itunesbabd quicktime and now I can't get it to download. It keeps sticking. I am concerned that my library is gone. I have no way of backing my files, laptop.
I was finally able to make it work. I did the following steps:
1. Delete/unistall every thing related to Apple/iTunes
2. Delete itunes folder if its still there.
3. open MSCONFIG->General->check off 'Load Startup Items'->click 'ok'
4. Reboot
5. Install iTunes
6. You can turn on Load Startup Items after iTunes installs.
Hope this help. Thanks for all the help. It sure was annoying!!!!

Error during iTunes 10 installation - iPod Service failed to start

Hi Everyone,
I am getting this error during installation of iTunes 10(Windows XP).
+*"Service (iPod Service)failed to start.Verify that you have sufficient priveleges to start system services."*+
*Can any of you please help?* I ignored it first and continued with the installation. Then tried to update iphone to iOS 4.1 which crashed. I had to go to Apple store to get my iphone restored. I am having trouble installing itunes and cannot restore data from backup.
I tried uninstalling itunes and deleted all itunes data as suggested by the guy at the Apple store. Still not working. Will appreciate if someone can help resolve this error. Thanks.

I just got off the phone with Apple tech support. The problem with that iPod Service is a problem with XP Service Pack 3, but can be fixed this way:
1. Right click on "My Computer", select "Properties"
2. Click on the Advanced tab.
3. in the Startup and Recovery section, click the Settings button.
4. Click the Edit byutton to edit your boot.ini file in notepad.
5. Look for "/noexecute=" in the file and change the word after the equals to "optin" (sorry - I don't remember what the original setting was anymore).
6. Save the file, close notepad, click the OK button on Startup and Recovery window, then reboot.
The warning message about the iPod Service should stop. Also, this helps with iPhones that are not recognized by Windows or iTunes after an install fails.

How to install report server as service in windows

OS : windows XP
oracle 10G isuite
Every time I am restarting my machine I have to start the report server using command rwserver server=repserver10G start in command prompt.
How to install the the report server as service in windows? so that it can be started automatically with machine restart.

You can create one batch file for this command and keep in startup scripts.
-Ammad

Report Server Windows Service SQLEXPRESS Error 107 on startup

Hi,
After reviewing the top related threads I didn't find what I'm looking for. People either gave up, or shut down the service. I'd like to solve this.
After investigating the problem on my server, I find the Report Server is doing just fine and this appears to be a transient error during boot as the other MSDN threads have indicated; evidently the SQL server is not yet ready when Reporting Services
looks for it.
While we could ignore this error, most of us would like to only see errors that are real, otherwise the real errors can get lost in the noise. So,
1) If the Report Server Windows Service were delayed during boot, would that stop the error event from occurring?
2) Assuming the answer to #1 above is yes, how do I delay the Report Server Windows Service?
Thanks.
Best Regards,
Alan

Hi Alberto, (again :-))
Thank you kindly for your quick response.
I had already read that TechNet article, so thanks for confirming I am on the right track. But that article, nor it's children articles, doesn't explain how to stop the error, unless I looked at the answer and didn't recognize it.
But I do recognize your alternative answer which I think is the solution I should use.
So, if you don't mind helping with some very basic instruction/confirmation:
Batch file content: I understand batch files themselves quite well. I wouldn't have known how to do the instruction you gave without your help. Thanks again. After the step above when I want to start the service,
am I correct that the next line in the batch file would be:
Net start ReportServer
I looked at Properties for the 'SQL Server Reporting Services' and that's the service name that was listed. It also changed in the Administrative Tools > Services panel when I stopped and started the Report Server from the Reporting Services Configuration
Manager. (SVRTFS\MSSQLSERVER) (SVRTFS being the name of the server I am working with)
Batch file activation: Would you mind just confirming for me the
best way to have the batch file run on server boot. What's the
best place to save the batch file and what's the best way to ensure the batch file runs at the appropriate time?
You mentioned powershell. Is there a reason that would be better than a regular batch file? I'm still beginning and don't quite understand the difference between powershell and not powershell.
But I do want this process to be automatic which is where I think you are driving me.
Thanks.
Best Regards,
Alan

Installation fails mobile device service fails to start

I have tried uninstalling several times. Downloaded a version of iTunes from a year ago and I still get the same error msg mobile device service fails to start. I don't feel skilled enough to start playing with the register. Very annoyed that apple asked me to upgrade and since then I have wasted hours trying to fix this and just seem to get nowhere.
I have tried repair and deleting in the correct order and running as admin etc etc. No luck this is an aweful upgrade apple must be aware there is a problem.
I am on windows 7 64 bit

Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed component for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2

MDM Server Window Service failed after adding server password

After adding MDM server password, MDM server window service can't start up. We have to use clix command to start the server. Is there anyway to fix window service problem?

Hi Jean,
From the version number it sounds like you're using version 5.5 SP4, right? The Console application was significantly changed in SP5 and you would no longer see the locked server icon... If you unmount the server from the Console, and re-mount it, isn't there an option on the context menu for the tree (right-click on the server node) to provide the password? Did you try "Connect to Server" or "Start Server" on this context menu?
Thanks... I don't know if I can help you with your problem, but I will try!
-Cleopatra
Message was edited by: Author - found the option on the context menu to provide the password to the server
Cleopatra Von Ludwig
Message was edited by:
Cleopatra Von Ludwig

Oracle9i AS Reports Server Installation - Service Failed to start

Similar Messages

Maybe you are looking for