Oracle9i Developer Suite Release 2 (9.0.2.0.1) for Windows (NT/2000/XP)
Hi,
I have problem while installing Oracle 9i DS. I have downloaded all the 10 files and follwed the directions given in that page..Those are:
Directions
Download the software (listed above) into a temporary directory.
1. Run file10.bat.
2. Run 90201iDS_Win32.exe
3. Run setup.exe (located in the \disk1 directory).
So, I have implemented the 1st two steps successfully. But in regarding the step3 I don't find where the setup.exe file is located it says it is in \disk1 directory but in the files mentioned i don't find any disk1 directory..
So, could you please tell me where is this disk1 located.
i will be very much thankful for your Help.
Thanks srinivas.
you should run the second step into a directory
c:\tata for exemple.
the second step will create in this directory 2 sub-directory : disk1 and disk2.
the setup.exe exist within the disk1 directory.
Similar Messages
-
Download Problem for Oracle9i Developer Suite Release 2
Hi,
I have been trying to download Oracle9i Developer Suite Release 2 from http://otn.oracle.com/software/products/ids/htdocs/winsoft.html
There are two zip files
1. A99230-01.zip (606,797,721 bytes)
2. A99231-01.zip (207,292,517 bytes)
I was able to download (2) completely and is able to extract files from the Zip format. But after trying 4-5 times downloading the (1) still I am unsuccessful.
After the files download reaches somewhere around 250,000,000 bytes it says the download is complete but when I try to open the Zip files, it says the Zip is invalid. Is there any problem with the Zip that is uploaded to this site. How can I solve this problem.
Is it possible for me to get the Free S/w on CDs like we used to get for forms 6i through OTN site? If so where should I register for the same?
thanks in Advance
Anil KrishnanIt seems that it is only possible to start download of two files at a time. If you try to start more, the system hangs up. If you are trying to download the version that is split in ten files, you have to do this one file at a time. If you are trying to download a single file, make sure that this is the ONLY download session that is running on your computer.
Yours sincerely
Niels Terp -
You say ("Directions"):
1.Download the software (listed above) into a temporary directory.
2.Run file10.bat.
3.Run 9.0.2.ids_win32.exe.
4.Run setup.exe (located in the \disk1 directory).
Steps 1 and 2 are OK.
Unfortunately, "9.0.2.ids_win32.exe" is just doing nothing!
In the DOS Box it says "This program cannot be run in DOS mode".
But trying to run it otherwise, it opens the DOS box and exits!
There are always problems with the split files.
Why don't you post the whole file as well?
Best regards
Jan GolkaI had a similar problem. To minimise the time on the download I tried to download all the files at one time. But when I started the download of file 3, the system just hang up. It seems that it is only possible to start download of 2 files at a time from the same webbrowser session. But if you start several instances of your browser it is possible to download all the files "at the same time". Of course the total download time will be the same, because all the browsers share the same bandwidth. But at least you don't have to watch your computer all the time. But it gave eksactly the same problem as you describe. When I took the time to download the files one at the time USING THE SAME WEBBROWSER SESSION everything worked fine !
I am well aware that this may be a coincidence, and I agree with you that these files should be packed in one big file !
Yours sincerely
Niels Terp -
Difficulty downloading Oracle9i Developer Suite
I'm having a terrible time trying to download the following file: A99230-01.zip (606,797,721 bytes)--Oracle9i Developer Suite Release 2 (9.0.2.0.1) for Windows (NT/2000/XP).
The smaller of the two files--A99231-01.zip (207,292,517 bytes)--came down the pipe with no trouble at all, but the larger one freezes at 99% completion and won't budge (I even left it to finish its business over the weekend but it was still stalled when I came back on Monday).
I've tried (and suffered the same fate) downloading the file to three different machines, all with high-speed connections, and I've spoken to our systems folks and there's no restriction on file sizes at their end.
Can someone help me?
Thanks in advance,
Paul BerryWe recommend the use of a download manager such as GetRight (getright.com)...give that a try.
OTN -
Problem installing Oracle9i Developer Suite
When I try to install Oracle9i Developer Suite in my Windows ME system, the Universal Installer prompt me the following error message:
"Unable to setup inventory. You may not have proper permissions".
Does anyone know how to solve this problem.
I'm new to Oracle, sorry if this is a stupid question.
Thanks and regards
Ken"Unable to setup inventory. You may not have proper permissions".
Yes, this error is infuriating.
In the case of a first-time installation of Oracle9i Database Release 2 Enterprise Edition on AIX 5.3, the answer was to -
1. Cancel the installation process.
2. On the server -
cd /etc
rm oraInst.loc oratab
3. Restart the installation process.
I don't know how applicable this solution is to Oracle9i Developer Suite, but would guess the problem is something similar. -
How to know Oracle Developer Suite Release Number?
Hi,
I have installed 11.5.10 CU2 on Windows XP SP2.
I have below dirs after installtion:
(1) D:\orclapps\orclappsappl
(2) D:\orclapps\orclappscomn
(3) D:\orclapps\orclappsdata
(4) D:\orclapps\orclappsdb\9.2.0
(5.1) D:\orclapps\orclappsora\8.0.6
(5.2) D:\orclapps\orclappsora\iAS
Following note 391564.1. I want to know Oracle Developer Suite Release to choose appropriate patch as per point 3.3. How can i know Developer Suite Release Number.
Thanks.We discussed this in the forum before, please see these threads/docs, it should be helpful.
how to find the developer version
how to find the developer version
How to Obtain Oracle Forms Version in Oracle Applications 11i from Command Line [ID 392793.1]
Thanks,
Hussein -
Hello to all,
I download Oracle9i Developer Suite, but I'm having problems to install. When I downloaded, there were 10 files,
File 1 (100,000,000 bytes)
File 2 (100,000,000 bytes)
File 3 (100,000,000 bytes)
File 4 (100,000,000 bytes)
File 5 (100,000,000 bytes)
File 6 (100,000,000 bytes)
File 7 (100,000,000 bytes)
File 8 (100,000,000 bytes)
File 9 (14,133,760 bytes
File 10 (418 bytes)
This is what the Directions says
1. Download the software (listed above) into a temporary directory.
2. Run file10.bat.
3. Run 9.0.2.ids_win32.exe.
4. Run setup.exe (located in the \disk1 directory).
My question is: where do I get the 9.0.2.ids_win32.exe and setup.exe? because I don't see anywhere on the page. Any ideas?
Any help is greatly appreciate it
Thanks in advanced
NatoHi vkw,
Thank you for the answer.
I ran the bat file to extract the other 9 files and I got the 90201iDS_Win32.exe.
I have two questions:
Could you please tell me how did you put the files on the CDs?
How did you get the setup.exe file? because on the directions on how to install says to run setup.exe (located in the \disk1 directory).
Coud you please be so kind to tell me how to do it?
Thanks in advanced
Nato -
Oracle9i Developer Suite software availibility
Hi all.
Please let me know from where can i download "Oracle9i Developer Suite"
I have tried from below link
http://www.oracle.com/technetwork/developer-tools/discoverer/downloads/index-095113.html
getting option "Oracle9i Discoverer Administrator and Discoverer Desktop version 9.0.2 "
When i click on the above link its show only 10.1.2.0.2 Developer Suite software available, 9.0.2 is missing.
With Regards
T.KHi;
AFAIK this version is not avaliable at net anymore(You can try your chance by checkin e-delivery).
If this version is a must than for your issue i suggest rise SR or try to connect wiht oracle local office
Regard
Helios -
Hi Friends;
Finally Oracle E-Business Suite Release 12.2.2 Media Pack is available at e-delivery site.
For a now it has been published for linux x86-64.
Setup size almost 83G
Here is the some notes:
New Installation Customers who do not have access to My Oracle Support will not have access to key documents needed to perform a New Installation of Oracle E-Business Suite Release 12.2. This Part Number includes Document files which should be referred to when a ‘Document xxxxxx.1′ is referenced within the Documentation.
The first document to review is the “READ FIRST – Document 1320300.1, Oracle E-Business Suite Release Notes, Release 12.2.html”. This is your starting point for performing a New Installation.
Documents included under the Documents directory:
Check first:- Document 1320300.1, Oracle E-Business Suite Release Notes, Release 12.2.html
Document 389422.1, Recommended Browsers for Oracle E-Business Suite Release 12.html
Document 1155883.1, Oracle E-Business Suite Desktop Client Hardware and Software Requirements.html
Document 1314621.1, Oracle E-Business Suite NLS Release Notes, Release 12.2.html
Document 1330701.1, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Linux x86-64.html
Document 1330702.1, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Oracle Solaris (64-bit).html
Document 1330703.1, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for IBM AIX (64-bit).html
Document 1330704.1, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for HP-UX Itanium.html
Document 1355068.1, Oracle E-Business Suite 12.2 Patching Technology Components Guide.html
Document 1376618.1, Oracle E-Business Suite Technology Stack Release Notes for Release 12.2.2.html
Document 1469456.1, DATAINSTALL AND HRGLOBAL APPLICATION 12.2 SPECIFICS.html
Document 1506669.1, Oracle E-Business Suite Release 12.2.2 Readme.html
Document 1560906.1, Applying the Release 12.2.2 AD and TXK Release Update Packs.html
This information&entery is avaliable at Oracle E-Business Suite Release 12.2 Supplemental Documentation – REVIEW FIRST V39664-01 at e-delivery site.
Enjoy it
Oracle E-Business Suite Release 12.2.2 Media Pack v1 for Linux x86-64-bit avaliable NOW! | Helios's Blog
Regard
HeliosHi Friends;
Thanks for inputs... Still there is no input at Steven Chan blog yet
Anyway
@Hussein Sawwan
We know very well who is the fastest gun in forum so well And yes let the fun begins
@Asif
Thanks for input man
@Nayas
Let us know how the installation goes
Regard
Helios -
Hi,
Ive just been trying to download your Oracle9i Database Release Enterprise/Standard/Personal Edition for Windows NT/2000/XP for my home computer, but it wont even download properly. The Disk 1 file, "92010NT_Disk1.zip", intializes, and downloads in less than a second, saying all 67.7kb is complete, taking into consideration the file is over 600mb big. When i open the *.zip file, its absolutely empty. I tried the links for Disk 2 and Disk 3, and they are working perfectley.
Whats going on?
Is there a bug on my side, or OTN's?
Will this be fixed soon?
Or should i download an older version?
A little feed back would be grately appreciated, due to the fact i cant find the latest version of Oracle anywhere else on the World Wide Web.
Thank you for your time.
- File: 92010NT_Disk1.zip
- Date/Time: 03/09/02 11:30PM
- Internet Browser: IE 6.0.2600.0000
- O/S: Windows 2000
PS: Your "Preview" Button didnt seem to work for me either.Hi Peter,
I downloaded the same zip files as you did for my home pc. The first zip file was not able to be unzipped by winzip. So I had to download the fisrt zip file again from OTN and the second time it was fine. I got all three zip files extracted and ran the setup.exe. Everything was fine till this point.
My problem is that Oracle 9i release 2 personal edition is not for XP home edition. I couldn't get the database correctly configured.
Li -
Please help locate Designer 6i Release 2 for Windows NT/2000/XP on OTN!
Hi,
Our Oracle Designer 6i Release 2 for Windows NT/2000/XP CD is damaged.
Is there a ZIP file for Oracle Designer 6i Release 2 for Windows NT/2000/XP
exist on OTN? Please provide the URL.
Thanks for your help.Are you sure that you want 6i R2? R2 as I remember is pretty buggy. You really ought to upgrade to at least 6i R4.11. Given that you are already on 6i, this is a fairly painless upgrade.
And the only reason that I wouldn't go ahead and upgrade to Designer 10g is if you are still supporting Oracle Forms in client/server mode. -
Dear all;
I just downloaded 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 on my local pc...I am trying to run the install.bat after unzipping the file however, the black pop-up window comes up and disappears almost immediately. Does anyone know what is causing this. Also all help is appreciated with the installation. Kindly note, I have read the installation manual and it is not really helpful.this is the content of it
@echo off
REM ====================================
REM ODAC 11.2.0.2.1 XCOPY INSTALL SCRIPT
REM ====================================
REM
REM This batch file installs components in an Oracle Instant Client Home
REM
REM ====================
REM MODIFICATION HISTORY
REM ====================
REM
REM 11/15/10 - change version number to 11.2.0.2.1
REM 06/30/10 - change version number to 11.2.0.1.2
REM Add ODP.NET 4 and ASP.NET 4 components
REM 08/21/09 - change version number to 11.1.0.7.20
REM 08/21/09 - remove component odp.net 1.x
REM 01/22/08 - Handle directory names with spaces
REM 01/22/08 - Fixed oracle.key file generation so that products that rely on
REM it can reference the appropriate registry location
REM 01/22/08 - Log all xcopy operations to the install.log in the destination
REM directory
goto :ParseArgs
REM **********************
REM INSTALL ALL COMPONENTS
REM **********************
:InstallAll
REM installing everything so set DEP to false or else dependencies such as
REM basic client will get installed needlessly by each component
set DEP=false
call :basic %1 %2 %3 %4
call :odp.net20 %1 %2 %3 %4
call :odp.net4 %1 %2 %3 %4
call :asp.net %1 %2 %3 %4
call :asp.net4 %1 %2 %3 %4
call :oledb %1 %2 %3 %4
call :oramts %1 %2 %3 %4
goto :EOF
REM ************************
REM INSTALL ASPNET Providers
REM ************************
:asp.net
REM echo Please wait... installing Oracle Providers for ASP.NET
if {%DEP%} == {true} (
call :odp.net20 %1 %2 %3 %4
echo *************************************** >> %2\install.log
echo Installing Oracle Providers for ASP.NET >> %2\install.log
echo *************************************** >> %2\install.log
REM copy the files
xcopy asp.net %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM pass in false for dependency because odp.net2x files are not copied over yet
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat asp.net %3 false
call configure.bat asp.net %3 false
popd
echo.>> %2\install.log
echo ************************************** >> %2\install.log
echo Oracle Providers for ASP.NET installed >> %2\install.log
echo ************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Providers for ASP.NET installed in an Oracle Instant Client Home.
goto :EOF
REM **************************
REM INSTALL ASPNET Providers 4
REM **************************
:asp.net4
REM echo Please wait... installing Oracle Providers for ASP.NET 4
if {%DEP%} == {true} (
call :odp.net4 %1 %2 %3 %4
echo ***************************************** >> %2\install.log
echo Installing Oracle Providers for ASP.NET 4 >> %2\install.log
echo ***************************************** >> %2\install.log
REM copy the files
xcopy asp.net4 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM pass in false for dependency because odp.net4 files are not copied over yet
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat asp.net4 %3 false
call configure.bat asp.net4 %3 false
popd
echo.>> %2\install.log
echo **************************************** >> %2\install.log
echo Oracle Providers for ASP.NET 4 installed >> %2\install.log
echo **************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Providers for ASP.NET 4 installed in an Oracle Instant Client Home.
goto :EOF
REM *******************
REM INSTALL ODP.NET 2.0
REM *******************
:odp.net20
REM echo Please wait... installing Oracle Data Provider for .NET 2.0
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ******************************************** >> %2\install.log
echo Installing Oracle Data Provider for .NET 2.0 >> %2\install.log
echo ******************************************** >> %2\install.log
REM copy the files
xcopy odp.net20 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat odp.net20 %3
call configure.bat odp.net20 %3
popd
echo.>> %2\install.log
echo ******************************************* >> %2\install.log
echo Oracle Data Provider for .NET 2.0 installed >> %2\install.log
echo ******************************************* >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Data Provider for .NET 2.0 installed in an Oracle Instant Client Home.
goto :EOF
REM *****************
REM INSTALL ODP.NET 4
REM *****************
:odp.net4
REM echo Please wait... installing Oracle Data Provider for .NET 4
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ****************************************** >> %2\install.log
echo Installing Oracle Data Provider for .NET 4 >> %2\install.log
echo ****************************************** >> %2\install.log
REM copy the files
xcopy odp.net4 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat odp.net4 %3
call configure.bat odp.net4 %3
popd
echo.>> %2\install.log
echo ***************************************** >> %2\install.log
echo Oracle Data Provider for .NET 4 installed >> %2\install.log
echo ***************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Data Provider for .NET 4 installed in an Oracle Instant Client Home.
goto :EOF
REM *************
REM INSTALL OLEDB
REM *************
:oledb
REM echo Please wait... installing Oracle Provider for OLEDB
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ************************************* >> %2\install.log
echo Installing Oracle Provider for OLE DB >> %2\install.log
echo ************************************* >> %2\install.log
REM copy the files
xcopy oledb %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat oledb %3
call configure.bat oledb %3
popd
echo.>> %2\install.log
echo ************************************ >> %2\install.log
echo Oracle Provider for OLE DB installed >> %2\install.log
echo ************************************ >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Provider for OLEDB installed in an Oracle Instant Client Home.
goto :EOF
REM **************
REM INSTALL ORAMTS
REM **************
:oramts
REM echo Please wait... installing Oracle Services for MTS
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ********************************** >> %2\install.log
echo Installing Oracle Services for MTS >> %2\install.log
echo ********************************** >> %2\install.log
REM copy the files
xcopy oramts %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat oramts %3
call configure.bat oramts %3
popd
echo.>> %2\install.log
echo ********************************* >> %2\install.log
echo Oracle Services for MTS installed >> %2\install.log
echo ********************************* >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Services for MTS installed in an Oracle Instant Client Home.
goto :EOF
REM ***********************************
REM INSTALL Basic Oracle Instant Client
REM ***********************************
:basic
REM echo Please wait... installing Basic Oracle Instant Client
echo ************************************** >> %2\install.log
echo Installing Basic Oracle Instant Client >> %2\install.log
echo ************************************** >> %2\install.log
REM copy the files
xcopy instantclient_11_2 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
call configure.bat basic %3
popd
echo.>> %2\install.log
echo ************************************* >> %2\install.log
echo Basic Oracle Instant Client installed >> %2\install.log
echo ************************************* >> %2\install.log
echo.>> %2\install.log
REM echo Basic Oracle Instant Client installed.
REM echo.
REM echo Please prepend %2 and %2\bin to system path environment variable
goto :EOF
REM =======================
REM Parse Script Arguments
REM =======================
:ParseArgs
if /i {%1} == {} goto :Usage
if /i {%2} == {} goto :Usage
if /i {%3} == {} goto :Usage
if /i {%1} == {-h} goto :Usage
if /i {%1} == {-help} goto :Usage
REM install dependencies or not - default is true
set DEP=true
if /i {%4} == {false} set DEP=false
if NOT EXIST %2\*.* (
mkdir %2 > NUL 2>&1
echo ****************** >> %2\install.log
echo ODAC install files >> %2\install.log
echo ****************** >> %2\install.log
REM /R to overwrite readonly files at destination
REM /Y to overwrite an existing file without prompting
xcopy configure.bat %2 /R /Y /F >> %2\install.log
xcopy unconfigure.bat %2 /R /Y /F >> %2\install.log
xcopy uninstall.bat %2 /R /Y /F >> %2\install.log
echo.>> %2\install.log
if /i {%1} == {basic} goto :basic
if /i {%1} == {odp.net20} goto :odp.net20
if /i {%1} == {odp.net2} goto :odp.net20
if /i {%1} == {odp.net4} goto :odp.net4
if /i {%1} == {asp.net} goto :asp.net
if /i {%1} == {asp.net2} goto :asp.net
if /i {%1} == {asp.net4} goto :asp.net4
if /i {%1} == {oledb} goto :oledb
if /i {%1} == {oramts} goto :oramts
if /i {%1} == {all} goto :InstallAll
goto :Usage
:Usage
echo.
echo Usage:
echo install.bat component_name oracle_home_path oracle_home_name [install_dependents]
echo.
echo Example:
echo install.bat all c:\oracle myhome (install all components)
echo install.bat odp.net2 c:\oracle myhome true (install ODP.NET 2 and its dependent components)
echo install.bat odp.net4 c:\oracle myhome true (install ODP.NET 4 and its dependent components)
echo install.bat asp.net2 c:\oracle myhome true (install ASP.NET Providers 2 and its dependent components)
echo install.bat asp.net4 c:\oracle myhome true (install ASP.NET Providers 4 and its dependent components)
echo install.bat oledb c:\oracle myhome true (install OraOLEDB and its dependent components)
echo install.bat oramts c:\oracle myhome true (install ORAMTS and its dependent components)
echo install.bat basic c:\oracle myhome false (install Oracle Instant Client)
goto :EOF -
I have a Adobe Creative Suite 6 Design Standard and Teacher Edition download for Windows, can I change the platform to Mac?
You can request to swap languages/platforms for a latest version product if you follow the instructions at the following link:
http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l -
I purchased Adobe Creative Suite 3 Master Collection Design Across Media Upgrade for Windows at a business closing. What do I need to find out before I can use it?
I couldn't tell you what you purchased, and it might even be difficult for an Adobe employee to do so. The business could have a few options as far as what they might have purchased.
Your best bet, considering what little you paid, will be to hand it over to someone you might sell it to and let them try it out. If it works, then it works. -
Installing Oracle9i Developer Suite
The installation of Oracle I Developer Suite on a Windows Xp Professional OS with Oracle 9i Enterprise Edition already installed fails because of this specific error:
Oracle 9i AS cannot be installed into an existing Oracle 9i 9.2.0.1.0 or higher Oracle Home
I would be greatful if someone finds a solution to this problem , (" I have changed the oracle home in the installation from ora92 to oracle") the installation was successful but the connection from the form developer to the database failed " tns listen could not find the database")
thanxThere are separate TNSNAMES.ORA for each Oracle Home.
e.g. Oracle 9i Release 2 in c:\oracle\ora92\network\admin
and Oracle9i DS in C:\oracle\ora9ids\network\admin
Therefore, if you want to connect to an Oracle server using the same TNSNAME, you need to set Net Manager for both Oracle Homes.
Alternatively, you may copy the working TNSNAMES.ORA and copy and overwritten the other file in another Oracle Home.
Maybe you are looking for
-
Getting the error while deploying the HelloWorld BPEL process
Hi Folks... I installed the BPM of version soa_windows_x86_bpel_101310. I designed and rebuilt the HelloWorld BPEL process in Jdeveloper10.13.1. It is executed with out any errors. I tried to deploy it in BPEL console 10.1.3.1.0. Then I got the follo
-
Oracle AS 10.1.3.0 and Oracle AS 10.1.3.1
I have JDeveloper 10.1.2.0.2 and Oracle AS 10.1.3.0.0 installation on one machine. Can I install Oracle AS 10.1.3.1 on the same machine? Will they co-exist? Thanks!
-
Best design for HA Fileshare on existing Hyper-V Cluster?
Have a three node 2012 R2 Hyper-V Cluster. The storage is a HP MSA 2000 G3 SAS Block Storage with CSV's. We have a fileserver for all users running as VM on the cluster. Fileserver availability is important and it's difficult to take this fileserver
-
Pricing for LUMF at header level
HI all, I am creating a BOM using LUMF but when entered in sales order it is asking for a pricing condition for both Sub item and Header Item . I have checked with the Item Category TAP it is not relevant for pricing . Is there any other setting whic
-
Bug in which Premiere does not allow publishing of videos to YouTube over 15 minutes.
When I try to publish a video to YouTube over 15 minutes I get this error: "The video duration exceeds the maximum duration supported by the destination. Please reduce the duration of video and try again." Clearly YouTube's policies change over tim