Oracle9i Installation on SuSe Linux 7.3 Professional Edition
Hi,
I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following statement is mentioned as below ):
"The following executables must present in the /usr/bin directory : make, ar, ld, nm"
But after the Linux insalltion I found that only make executable is present and other doesn't. My doubt is, if I continue with the Oracle Installtion without these files does the installer cause any problems? If so how do I get these executables, as these executables doesn't exist in the "Software Installation" listing of SuSe 7.3 Professional edition?
Another doubt is, Does SuSe 7.3 Professional edition suitable for Oracle 9i Database server? I checked the Kernal version, it seems to be OK.
Please help.
Thanks in advance
Sriram Subbiah
Hi,
I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following statement is mentioned as below ):
"The following executables must present in the /usr/bin directory : make, ar, ld, nm"Thats compiler, linker and linktool, install "binutils"!
Sincerly,
Christine
Similar Messages
-
I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
But this massage pop up when I used my browser first time before start database.
Actually when I clicks on yes to start database.
The web browser you are using is not optimized for this release of Oracle enterprise manager. It is recommended that you use one of the following:
* Microsoft Internet Explorer version 5.5, 6.0 or higher
* Netscape Navigator version 7 and higher
*Mozilla version 1.3.1 and higher
Dose any one know hoe to upgrade mozilla or install internet explorer 5.5, 6.0 or higher or SLES 8.
Regards,
DYou can download package for your distribution (for example) from http://www.mozilla.org or directly from SuSE ftp server ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586
IE for linux does not exist. -
9i and 9ias installation on SuSE linux 7.3
Hi,
Are there any known issues involved in installation of 9i
and 9ias on SuSE linux 7.3 ??
Also please let me know what are the workarounds for those
problems and where the patches may be downloaded from ??
I am asking this question because SuSE 7.3 is not yet
certified by oracle.
Thanks,For the database, look at
http://www.suse.com/en/support/oracle/db/9i_73.html -
R12 EBS Installation on Suse Linux 9.0
Dear Friends,
I am doing a dual installation of oracle 12 ebiz on suse linux 9.0 and i my installation hangs on with the following message , having checked metalink, forum notes , i have run the autoconfig and the autoconfig on the application tier
fails (i have pasted the below this )
Login Page
checking URL = http://bhmlx40.uat.itvplc.ads:8010/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : shmlx43
sDbDomain : uat.plc.ads
sDbPort : 1531
sDbSid : PROD
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@shmlx43.uat.plc.ads:1531:PROD
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=shmlx43.uat.plc.ads)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=PROD)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=shmlx43.uat.plc.ads)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=PROD.uat.plc.ads)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
Can you please help me to resolve the above problem , if someone has come across this problem
Thanks in advance
Kind regards
SriThanks John, hsawwan
The problem was actually , i was doing a dual node installation , i didnt have valid entry of my database server on the application server , i mean the fully qualified domain name , i have changed it and the installation went fine . I am having another problem now . I cant login to the user login page from my windows box
as it ends up with page not displayed message . Once the installation was done
I had an option of connecting to the URL directly from the installation page itself which went fine but i cant connect the same URL from my windows box , i have made valid entry under hosts file on the window box and i believe it should work
I am not sure why its not working . I am sure that Apache is up Can one of you help me with this problem
kind regards
Sri -
Oracle 8i installation on SUSE Linux 7.0 and 8.0
I have not been able to install Oracle 8i (8.1.6) on SUSE linux 8.0 as well as 7.0. The Universal installer starts but stops after showing a lot of messages. Any suggestion/help?
The configuration of my machine is: Intel P3 733 MHz on Intel 815 original motherboard, 256MB RAM, 40 GB Harddisk
-
Unable to continue the installation in suse linux
hi,
this sudheer
my system environment as follows;
operating system:open suse11.0
Java devloper kit:jdk1.6.0 for linux
processor:amd 64
hard disk:250 gb
DBMS:maxdb 7.6
1.i have extraced the file of IBMjava2-JRE-1.4.2_12 amd64.tgz into opt folder.
but i used default jdk 1.6.0 which is came from the open suse11.0.
2. i have decalred the environment variables as follows;
for java
export JAVA_HOME=/usr/lib/jvm/java-1.6.0
export PATH=/usr/lib/jvm/java-1.6.0/bin
for SAP Installation master
export SAPINST_JRE_HOME=/usr/lib/jvm/java-1.6.0/jre
export DISPLAY=water:0.0
3.i have created sapmnt folder in /
4. but during the third phase of instalation(unarchived files) solution manager
it is unable to continue
regards
sudheer koppalaHi Sudheer,
I am sorry but I guess you are using the wrong versions here
SAP does not support SUSE11 and also Java version should be 1.4.2.....
SAP only supports SUSE Linux Enterprise Server 10,SUSE Linux Enterprise Server 9,SUSE Linux Enterprise Server 8
Refer to SAP notes 171356 for SAP on Linux
1172419 for Java versions
These are highly useful
Let me know if you need any other info.
Rohit -
Steps on ecc6 installation in suse linux
hi sir/madams
i am new in ecc6 installation on linux systesm please provide a sap installation steps on suse linux...and thankul to all
regads
sureshCheck the install guide as above for ECC/ERP 6.0 and also be sure to check the following SAP notes:
Note 171356 - SAP software on Linux: Essential information
Note 1275776 - Linux: Preparing SLES for SAP environments
Depending on the version you running:
Note 1310037 - SUSE LINUX Enterprise Server 11: Installation notes
Note 958253 - SUSE LINUX Enterprise Server 10: Installation notes
Nelis -
Ecc 6.0 installation on suse linux 10 server
can anyone plz send me the step by step procedure of installing ecc 6.0 on suse linux 10
srjn_123 wrote:
can anyone plz send me the step by step procedure of installing ecc 6.0 on suse linux 10
Inappropriate Question.
If you have SAP OSS access, then please browse through service.sap.com/instguides --> SAP Business Suite --> ERP --> ERP 6.0
Read the Guides.
Thanks -
Please help with oracle9i installation on PCQ Linux 2004
hi all
please help,
installation of oracle9i hangs on PCQ Linux2004 ,
The installation starts with message
Initializing Java Virtual Machine from /tmp/OraInstall2005-03-02_11-04-34PM/jre/bin/java. Please wait...
After this message installation stops.I also have latest JDK version which jdk1.4
please helpYou said you upgraded the JRE to 1.4. Did you change the parameter JRE_LOCATION in oraparam.ini, to point to the newer jre? I found some info on this forum thread for this error (but this error occurs before the installation screens even come up. You didn't mention exactly what screen your error comes up on so I figured I would mention this just in case).
Re: install oracle9204 in redhat linux es 3
If you're on the screen after the installation summary screen, and it hangs while saying "Link pending, copying JRE" above the progress bar, I am also at this stage.
Although I haven't fixed the problem yet, someone mentioned that you need to install patch 2878462 to fix this problem. I haven't done this yet, but saw the write up here:
http://www.orafaq.com/forum/t/37572/0/
I can't figure out how to get the patch since I don't have a support contract. I don't understand how they can provide a free linux download and not give you access to the patchsets (on metalink)!!!! Anyone know how I can get the patchset without having a support contract and logging into metalink?
Anyone know if installing this patch solves the issue? -
Oracle 9i Installation on SuSE Linux 9.0
I am trying to install Oracle 9iR2 on SuSE 9.0
All pre-Installation Setup was done like i saw on Suse web pages (create Oracle-User, oinstall-usergroup etc.)
I login as root-user on the system and open a shell session (localy) as oracle user with :: sux oracle :: command.
I started runIstaller and got the welcome windows from oracle Installer. i can click on each button but the button next is not reacting so that i could go to the next window. Can you please tell me why the installer is not properly working?you have to unlock the numpad key on your keyboard.
-
Content server installation on susi linux 9
Hi friends
this is first time i am installing content server on linux system . and i facing too many problems as iam really not aware of linux
anway can provide me step by step details to install and configure content server on linux operating systemHello!
I presume (taking the name of this forum) the original question was about SAP ContentServer?
This would be a rough description how to configure a SAP CS/CSC for FileSystemStorage
0) if linux is not your platform of choice (it would be mine) - take a different platform
1) read and understand SAP notes, especially 664384, 586895 and related
2) make sure you are using an enterprise linux (cf. service.sap.com/PAM)
3) your linux installation should (amongst others) contain
a) gcc (GNU c-compiler)
b) gdbm-devel
c) libexpat
in general this would be described as a development (with regard to software building) system by some linux distro's
4) retrieve the apache 2.0.x (for allowed x: cf service.sap.com/PAM) source code to build your own apache
5) be root user
6) create group sapsys
7) create user csadmin, primary group: sapsys
8) you may want to create an own filesystem for content, e.g. /SAP
9) as user csadmin build apache with option (amongst others) --prefix=/home/csadmin (presuming this is csadmin's HOME)
10) if you also need the cache server (you will as soon as you have more than 1 location, repeat 6, 7 and 9 for user cscadmin
11) as root (make sure you have X), execute sapinst from the installation master
12) installation almost as under Windoze - don't use AdminSecurity as it will not work with modern UNIXes (ContentServer wrongly assumes that /etc/passwd contains the crypted passwords and there's a note proposing to put it there - security alert in my humble opinion) - better to protect transaction csadmin
13) you should be all set
I hope I didn't forget anything - this was from memory.
Contact me if you have problems.
Good luck and best regards, Markus -
Can't install Oracle on SuSE Linux 9.3 Pro
Hi,
i try since three weeks to install Oracle 9.2 Release 2. My last Problem was,
that i didn't know how to log in as the created Oracle User. This Problem is solved.
But when i install Oracle as the Oracle User and try to configure the Administrator
Group, i get the error, that i don't have the specific permission to change that,
so i gave the Oracle User all Rights about every directory (chown oracle:dba / ).
After that the Installation proceed without any problem, but after the Installation,
the Database Configuration Assistant failed to install and two other Assistants, too.
So, i don't know where there problem is. I fulfilled every pre-installation Task, but
it still isn't possible for me, to install Oracle 9.2 on a SuSE Linux 9.3 Professional
System.
If anyone could help me along this Installation, i would be very thankful.
Thanks a lot
DanielBut when i don't give the oracle user all rights, it isn't possible to proceed with theinstallation
But if you give that rights then it's a security hole. According to your words I guess you have similar enviroment settings:
ORACLE_BASE=/
ORACLE_HOME=/<directory_name>
Why you not installing on deeper directory such as /opt or some your own directory? For example
ORACLE_BASE=/myoracledir
ORACLE_HOME=$ORACLE_BASE/<directory_name>
Then chown -R oracle:dba /myoracledir.
Then oracle will be owner just for /myoracle directory and all its subdirectories.
i just could look at the error details, but they didn't described the erroranyway.
That's not so true. Error log you could find in /tmp/OraInstallYYYY-MM-DD_HH_MI_SS.. -
MiniSAP WAS 6.10 and JAVA 1.4.1 (SUSE Linux 9.0)
Hello all!
I have some problems with the MiniSAP installation under
SUSE Linux 9.0.
I use the MiniSAP WAS 6.10, SAP DB 7.3 and the SAP Gui for the JE 6.10.
The Problem comes with the Java 1.4.1. In the documentation from the SAP CDs is the version IBMJava2-JRE-1.3-45 required.
If I try to run the SapGui i get many errors from Java (I think).
Anybody has a idea ?
Regards
René
e-mail: [email protected]Hello René,
I think you should download the latest SAP GUI for JAVA at: ftp://ftp.sap.com/pub/sapgui/java/630r4/PlatinGUI-Linux-630r4.jar
Regards
Gregor -
Experience on Labview and SUSE Linux Professional 64-bit
Hi!
Does anybody have any experience on running LabVIEW on SUSE Linux Professional 64-bit version? I'd appreciate any experiences about:
- installation
- development
- running applications
- compiling standalone applications
- etc
Regards.
Tomi
Tomi MailaHi Tomi,
There is currently no support for LabVIEW on 64-bit architectures, either on Windows or Linux. LabVIEW will still install and run properly if your operating system has a 32-bit compatibility mode.
The following is a KB that discusses the compatibility of NI products with 64-bit architectures with a Windows OS. Most of the statements will apply for a Linux OS as well.
KB 37NBEQSF: Are National Instruments Products Compatible with Windows XP 64-bit for AMD's x86-64 Te...
Hope this helps.
Kileen -
NetWeaver 2004s installation problem on Suse Linux
Hi,
I downloaded NetWeaver 2004s 90 days version from SDN and installed on Suse linux. I am not able to execute command to get the license after installation. Here is the line I executed
add user n4sadm
unpacking adm_env.tar.bz2
Changing password for n4sadm.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sdb
Changing password for sdb.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sqdn4s
unpacking sqd_env.tar.bz2
Changing password for sqdn4s.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_I.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_II.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_III.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPN4S.tar.bz2
Service visinet-gui on port 3601/tcp was deactivated...
Service cpq-tasksmart on port 3201/tcp was deactivated...
Service netxms-mgmt on port 4701/tcp was deactivated...
Service iwec on port 4801/tcp was deactivated...
Service tick-port on port 3200/tcp was deactivated...
Service netxms-agent on port 4700/tcp was deactivated...
Service iims on port 4800/tcp was deactivated...
Update the necessary information in sysctl.conf:
kernel.shmmax = 23136829430
kernel.shmall = 5242880
kernel.msgmni = 1024
fs.file-max = 32768
kernel.sem = 1250 256000 100 1024
Found interface: eth0 . Alias is eth0:0
ifconfig eth0:0 192.168.155.1 up
Ok
n4shost:n4sadm 35> /usr/sap/N4S/SYS/exe/run/saplicense -get
/usr/sap/N4S/SYS/exe/run/saplicense: Exec format error. Binary file not executable.
Can any one help me to complete the installation and execute the server successfully. I am very new to linux. Do i need to execute any other commands to complete my installation.Dear Rajasekhar,
this error simply comes, because the architecture of your computer is not the same as the one from the test drive. As I'm not sure, which architecture the N4S test drive uses, we simply have one of the following situations here. Either
your machine is x86_64 and the N4S is i386 or
your machine is i386 and the N4S is x86_64.
Please check!
Thanks,
Hannes
Maybe you are looking for
-
I have an iPad Air and want to downgrade to iOS 7. How does this work?
iOS 8.1 is really slow on my iPad Air so i want to downgrade to iOS 7. What should i do?
-
I can't believe Safari not capable of something IE and Firefox can...
So I have finally switched my father over to Mac I show him all this cool stuff the Mac operating system can do. I also show him how clever Safari is as a browser with the private browsing, tabs, and built in pop-up blocker, etc. So, with his new Mac
-
HOW TO REFER TO A PARTICULAR LINE IN A SCREEN FETCHED BY A MULTILINE QUERY
Hi, Can anyone help me with an answer for the following problem: I have a screen where multiple records are displayed by a query. I want to change certain columns in each record and re-insert as new new record in to the same table. Can anyone tell me
-
Phone won't turn on because if iTunes notification?
I recently got an updates on my settings on my iPhone so it's automatically updated and I agreed blah blah and eventually it said it needed to restart for the changes to take place, so obviously I did thinking all would be fine and now I can't access
-
IMAC Flash Player Quit Unexpectedly
Previously working fine and a couple days ago I get the message that Flash player quit unexpectedly