Oracle9ias Discoverer configuration page doesnt display discoverer plus.

Oracle9ias Discoverer configuration page doesnt display discoverer plus. How do i make sure discoverer is completely installed.

Hi
Looks like you have two threads on this subject. Please see my reply on this thread: Oracle discoverer ver 9.0.2.39.02
Michael

Similar Messages

Oracle9iAS v2 Discoverer Services Configuration Page

Hi, i am trying to change communication protocol in discoverer plus since i could not connect to it outside of firewall(inside firewall it works fine). In the documentation it says that i need to go to em site's Oracle9iAS Discoverer Services Configuration Page and change the default communication protocol.
But when i go that page i do not see the link to Discover plus. I could only see(General Discover,Discoverer Viewer, and discoverer portlet provider links.
How can i have a discoverer portlet link appear on the configuration page? Any help is appreciated.
Below is a log file(i changed a url for security purpose):
Oracle JInitiator: Version 1.3.1.8
Using JRE version 1.3.1.8 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\TairProxy Configuration: no proxyJAR cache enabled
Location: C:\Documents and Settings\Tair\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0----------------------------------------------------
Downloading http://ga.adv.com:7779/discoverer/plus_files/disco5i.jar to JAR cachejava.util.zip.ZipException: ZIP file must have at least one entry at java.util.zip.ZipOutputStream.finish(Unknown Source) at java.util.zip.ZipOutputStream.close(Unknown Source) at oracle[i]Long postings are being truncated to ~1 kB at this time.

Hi
Looks like you have two threads on this subject. Please see my reply on this thread: Oracle discoverer ver 9.0.2.39.02
Michael

How to hide discoverer connection page after opening discoverer plus?

Hi,
I invoke the following url in browser window 1 to open Oracle DIscoverer Plus.
I notice the browser window 1 will open a window (say i call it browser window 2) to display the Oracle Discoverer Plus application.
Once the Oracle Discoverer Plus java applet is fully loaded, the browser window 1 will show the Connect to Discoverer Plus page.
I wonder if we can configure not to show this page as my users might confuse to see a few existing connections listed there and in fact if possible, I don't want user to see the list of connections.
Anyway to get rid of the page?
Please advise.
Thank you.

I am trying to use URL parameters to keep Discoverer Plus from launching a new window after login. I notice that what works in Discoverer Viewer does not work in Discoverer Plus.
The following works with Discoverer Viewer :
<iframe src="https://cohort50.spinsys.com:8251/discoverer/viewer?framedisplaystyle=embedded"
width="100%" height=100%></iframe>
After Viewer login the next page displays in the same window, just as I want it to.
Discoverer Plus behaves differently. If I try this with Discoverer Plus a new window is launched after successful login. I also tried adding the pluspopup=false parameter to the URL, but the problem remains.
Neither of the following two fragments prevent a new window from launching after successful login to Discoverer Plus :
<iframe src="https://cohort50.spinsys.com:8251/discoverer/plus?framedisplaystyle=embedded"
width="100%" height=100%></iframe>
<iframe src="https://cohort50.spinsys.com:8251/discoverer/plus?framedisplaystyle=embedded&_plus_popup=false"
width="100%" height=100%></iframe>
Does anybody have any advice for me? What must I do?

How to display binary file saved in BLOB column in Discoverer PLUS /VIEWER

HI, Friends,
I tried to display the binary file saved in the database in BLOB column with the *.doc or *.xls fomats, but it seemed not work at all. I can display them in discoverer DESKTOP, but not the web version PLUS or VIEWER. MY Discoverer PLUS/VIEWER version is 9.0.4.45.02 and the database is 9.2.0.4. Are there any special setting/configuration in somewhere (Discoverer administration/Applicaiton server/PLUS/VIEWER?)
Any help /information will be greatly appreciated.
Thanks a lot.

Hi,
Sorry but this feature is not available in the web version of 9.0.4.45. You will have to write your own mod_plsql function to download the file.
Rod West

Export to EXCEL 4m Discoverer Plus/Viewer doesnt retain Header Formatting ?

Hi,
I am trying to export reports from Discoverer Plus and Viewer to XCEL
but the Header's Formatting like Bold and Background Color etc are
not being exported as seen in Plus.
Could you please advice on how to make this happen.
Thanks,
VJ

i tried this option..but the problem is as follows
Excel Export:+ The header comes like this
Report Name Company Name Date : 22-APR-10 Page: 1
Column1     Column2     Column3     Column4                     Column5                                     Column6                                                     Column7
122124     9752          7 METRO NORTH     716 MIDWEST REGION     DODGE CITY/ANDERSON TOYOT      LEXUS OF ROCKFORD
122124     9752          7 METRO NORTH     716 MIDWEST REGION     DODGE CITY/ANDERSON TOYOT      LEXUS OF ROCKFORD
122124     9752          7 METRO NORTH     716 MIDWEST REGION     DODGE CITY/ANDERSON TOYOT      LEXUS OF ROCKFORD
HTML Export:+ The header comes like this
Report Name                                 Company Name
Date : 22-APR-10                            Page: 1
Column1     Column2     Column3     Column4                     Column5                                     Column6                                                     Column7
122124     9752          7 METRO NORTH     716 MIDWEST REGION     DODGE CITY/ANDERSON TOYOT      LEXUS OF ROCKFORD
122124     9752          7 METRO NORTH     716 MIDWEST REGION     DODGE CITY/ANDERSON TOYOT      LEXUS OF ROCKFORD
i.e the export to HTML is retaining the format but it is putting the heading into multiple cells..there by making it look bad when opened in Excel.
Wheras in EXCEL export it doesnot retain formatting like Bold,etc it merges all the cells of teh first row and is putting it there which is much better to view.
Is there anything we can do about it ??
Thanks

Discoverer Plus - Problem with Page Orientation when printing pdf's

Hi,
When printing pdf's in Disco Plus I have a problem:
My workbooks are a mixture of landscape and portrait pages.
I am printing the entire workbook and then using cutepdf to produce a pdf.
If I print to paper I get the correct landscape/portrait settings.
If I print to pdf then landscape pages appear vertically when I view on screen so that the text is running from bottom to top of the page.
So it is picking up th portrait/landscape settings from the individual worksheets but cutepdf has not realised that the pages are landscape so they appear on the screen vertically.
This was not a problem on discoverer desktop so I am confident that this is not a problem with cutepdf.
Any thoughts?
Justin

Thanks 2257648922,
Version details are as follows:
OracleBI Discoverer 10g (10.1.2.3)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
Discoverer Model - 10.1.2.55.26
Discoverer Server - 10.1.2.55.26
End User Layer - 5.1.1.0.0.0
End User Layer Library - 10.1.2.55.26
Oracle Database 10g Release 10.2.0.4.0 - Production
Copyright © 1999, 2005, Oracle. All rights reserved.
So I assume that means my version doesn't have the bug you mention.
Any other thoughts would be appreciated.
Justin

Can't Display large total in Discoverer Plus

I am trying to display a large total (billions) in Discoverer Plus, however instead of displaying the actual number it displays "#######################". The number I am trying to display is 1,234,567,890. Other totals display fine, however they are only in the millions, not billions.
I am in Discoverer Plus so I can't change the cell/column size. I have also tried changing the font size to a much smaller size.
Any suggestions?
Currently Displays
Col_A
1,000
1,513
3,643
Total: ################
Need Displayed
Col_A
1,000
1,513
3,643
Total: 1,234,567,890

Thanks for the info John.
I'm using Discoverer Plus and don't have Discoverer Desktop, although our admin does. If he makes the change on Desktop will the change be reflected on Discoverer Plus as well?
I have tried a few different formatting changes in Discoverer Plus however my Discoverer Plus is down right now and can't get in to see if the change you recommended is available in Plus.
Again, thanks for the help...it is much appreciated.

Logo To be Displayed on Discoverer plus (Web Server Access)

HI All,
I Am Developing a report in which ,i have to insert a logo(.bmp) into the report title and i did that by entering "FORMAT TITLE" menu and iserted a .bmp file.
But the problem is this ,the logo thus inserted is not visible on Discoverer Plus (Web Based Access).
Please help me out to resolve the same.

Hi,
Based on your description, I understand that DEVICES tab disappears from Remote Web Access website after RemoteApp
configured. If anything I misunderstand, please don’t hesitate to let me know.
à
But now I cannot figure out how to get to my server's Dashboard, because when I go to my main web acess site (that ends with "/Remote"), the server is not listed
under devices.
Did all users encounter the same issue when access RWA? Please open Dashboard and navigate to USERS tab, then
click the problematic user account and select View the account properties. In Properties of this user account, please navigate to Anywhere Access, then please check if Computer option was checked in
Show selected links on Remote Web Access. Meanwhile, please also use an administrator user account to check if this issue still exists.
In addition, please follow the path: C:\ProgramData\Microsoft\Windows Server\Logs\WebApps folder and check
RemoteAccess log file if find more clues.
Hope this helps.
Best regards,
Justin Gu

Can not display Chinese on discoverer plus

i have moved this thread to this forum from discoverer.
Dear,
ebs 12.0.6
OS OUL5x64
AS 10.1.2.3
using bi 10.1.2.3 with discoverer
Discoverer Version:Server 10.1.2.55.26
when connect to the viewer like
http:10.10.10.10:7778/viewer
it could display the Chinese character correctly
when connect
http:10.10.10.10:7778/plus
the Chinese became square boxes.
Please advise how to fix this error.
Regards,
Tom

Hi Huusein,
i found these file in application tier, they were all upper case.
ALBANWTJ.ttf
-rw-rw-r-- 1 oracle oinstall 18777080 Dec 29 2006 ALBANWTK.ttf
-rw-rw-r-- 1 oracle oinstall 18676032 Dec 29 2006 ALBANWTS.ttf
-rw-rw-r-- 1 oracle oinstall 18788548 Dec 29 2006 ALBANWTT.ttf
copied them over and restart the opmnctl stopall and then startall but the discoverer/plus could not display Chinese, i then renamed it to lower case according with doc # Doc ID: 340944.1
and restart the opmnctl again but it still could not display Chinese in discoverer/plus
these files (5) from the doc 340944.1 but my actual from appl Tier only has 4 files with all upper case.
AlbanWTJ.ttf
AlbanWTK.ttf
AlbanWTS.ttf
AlbanWTT.ttf
ALBANYWT.ttf
can you please give me some suggestions.
Regards,
Tom

Discoverer plus (Java Applet doesnt load)

hi
i have a problem with discoverer when i try to use discoverer plus
i can connect me via discoverer desktop without problems and view my business area....
the problem occurs when i clic in the conexion link... the browser open me a new browser and it can´t load the applet of JAva
*****the load of the applet of Java has failed*****
ha fallado la carga del applet de Java ( in spanish)
If i open my Java console i get the follow message:
cargar: clase oracle.disco.DiscoApplet no encontrada.
java.lang.ClassNotFoundException: oracle.disco.DiscoApplet
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
How can i solve this problem? I review logs files in EM (section Discoverer but dont tell me valuable information
Any help will be apprecciate.
Alex

Dear Mr. Ramirez
I apologize, please, to speak with you in English, I would prefer to speak in Spanish or Portuguese but these forum demands the English.
I'm facing now the same problem taht you faced on apr-2006, see:
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@4cd580, refcount=1
network: Connecting https://www.MYOCSPORTAL.com/disco/plus_files/plugin/images/download.jpg with proxy=DIRECT
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: httpCompression = true
network: Connecting https://www.MYOCSPORTAL.com/disco/plus_files/disco5i.jarjar with proxy=DIRECT
network: Connecting https://www.MYOCSPORTAL.com/disco/plus_files/oracle/disco/DiscoApplet.class with proxy=DIRECT
network: Connecting https://www.MYOCSPORTAL.com/disco/plus_files/oracle/disco/DiscoApplet.class with proxy=DIRECT
load: class oracle.disco.DiscoApplet not found.
java.lang.ClassNotFoundException: oracle.disco.DiscoApplet
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source
... follows a lot of jav lines...
I'm using a 10g platform, with discover and web forms. Also a OCS 10g platform.
The clients are based on JRE 1.5.0_10, IE sp2, windows XP professional sp2.
I've been working with this annoying problem for a week, and Oracle support team had spinning around the trouble without a valuable working idea.
Certainly, you've solved this situation - I hope so!
Please, can I count on you for any suggestion that can solve my problem?
Thanks in advance for any reply
Best regards
Adilson Brites
Message was edited by:
user546151

Discoverer Plus/Viewer from menu item in Oracle Applications errors.

Starting Discoverer Plus/Viewer from menu item in Oracle Applications R12 errors.
Here is some general config information that is suspected to be the issue.
1. Running Oracle Applications R12 over HTTPS.
2. Running Discoverer Plus/Viewer over HTTP.
3. Calling menu item that calls a function to start Plus/Viewer.
Function Definition called by the menu item is listed blow.
Properties Tab: Type=SSWA jsp function Context Dependence=Responsibility
Form Tab: Parameters="mode=DISCO"
Web HTML Tab: HTML Call=OracleOasis.jsp
Fact: Starting Discoverer Plus using a URL works fine in the browser. The login page comes up and I can look in to Plus.
The page that dose a redirection to start the Plus applet or Viewer web page fails with this error in IE 7.
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
Thank you for your time.

Hi,
Check that the ICX system profiles are set correctly for your Discoverer configuration. In particular the ICX: Discoverer Launcher and ICX: Discoverer Viewer Launcher system profiles.
When IE displays an error is the URL displayed in the browser a correct Disco URL?
Rod West

Discoverer Plus associate with the Oracle Application Server Infrastructure

Hi Everyone,
I just install the Oracle BI (v 10.1.2.0.2) into my 2003 server so I could use the Discoverer Plus and Viewer. This is a stand alone BI installation (I guess, I have little knowledge about Discoverer plus or Oracle AS).
My question is how could I connect the Discoverer plus to my ODS database, so I could create report or view report.
and where to find the Oracle Application Server Infrastructure (or How do I know I have the Oracle Application Server Infrastructure?)
I read the Oracle BI Discoverer Configuration Guide, and it tell me to associate the Oracle BI with the Oracle Application Server Infrastructure to deploy the Discoverer. so I went to the BI Application Server Control page, the Infrastructure section, the Identity Management to configure the Internet Directory, so I could I have the public connection, but it didn't work.
Also do I real need the Oracle AS Infrastructure to make the Discoverer Plus work?
Thanks in advance
Kevin C
Kevin
Edited by: cmingl on Feb 11, 2010 1:30 PM

Hi Kevin,
Oracle AS Infrastructure is needed only if you are implementing SSO for Discoverer or using Public connection .
Else only Oracle AS Middle tier is sufficient to work with Discoverer Plus .
Regarding "how could I connect the Discoverer plus to my ODS database, so I could create report or view report"
You need to create the End User Layer (EUL) and then grant privilege to the EUL to users who will be creating the report .
Thanks,
Sutirtha

Chinese Characters in Discoverer Plus

Hi,
I am having the problem of outputting chinese characters in Discoverer Plus on the client browser. The chinese characters are represented by "box" when they are outputted to Discoverer plus. The chinese characters can be shown with the Report Builder. My database is running on UTF8 characterset.
I have done some configurations to output the chinese characters to the Report Builder. Besides, the chinese characters can be shown in the PDF reports generated from the Report Server. The configurations that I have done is to modify some of the files in ORACLE_HOME/bin/ and ORACLE_HOME/guicommon9/tk90/admin/.
How do I ouput the chinese characters in Discoverer Plus?
Thank you.
Cheers,
Joey

i have installed sqlplus and oracle db in the same PC under chinese win xp.
i found that if you spool the output to a text file, and type in dos-prompt, it still cannot display the chinese character properly. but if you open the text file by notepad, bingo, you can the chinese character.
i think that it is because dos-prompt application is non-unicode application. so it could not display unicode character properly.
as a result, if you want to display unicode character in non-unicode application (run sqlplus under dos-prompt), you have to set the NLS_LANG environment variable which match the character set of non-unicode application which your operating system assigned. in my case, it should be Big5. then oracle would do the conversion for you automatically, i.e. from unicode in DB to Big5 in client.
I either set the NLS_LANG environment variable in one of the 2 ways:
NLS_LANG=american_america.zht16big5 or
NLS_LANG=american_america.zht16hkscs
Regards,
KH

To visualize the report created using Discoverer Plus in Web

Hi,
I had created the report usingOracleBI Discoverer Plus Version 10.1.2.45.46c & able to visualize the report in OracleBI Discoverer Viewer Version 10.1.2.45.46c.
URL fo accessing the report is as:
http://machinename1:7777/discoverer/viewer
If i try to connect to from another machine (machine2) as
http://machinename1:7777/discoverer/viewer
i'm unable to connect & i get the error page can not be displayed.
Is it necessary to have the URL only with domain name as
http://machinename.domainname:portno/discoverer/viewer
I had already installed OWB, Oracle BI etc. If i had to create a domain then i have install all these & need to work from scratch.
Is there any way to access the report across the internet or web.
Plz do provide a solution for this issue.
Thx in Advance

Hi,
Check the Discoverer OBEs at:
http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/index.html
The lesson titled 'Creating a Business Intelligence Dashboard Using Discoverer Portlets' should answer your question.

Discoverer Plus Applet - Cant get login screen

Hi,
I have discoverer 4i set up on Linux and Win 2000 with 9ias 1.0.2.2.
The discoverer viewer works fine in both environment.
The discoverer plus works fine with WIN 2000.
However with Linux the applet does not bring the login screen. The applet continue to be displayed but is not navigable.
Thanks
Shailesh

Hi,
This happens due to the configuration of the browser and the java installed.
First make sure the configuration in the browser are set correctly, pop up blocker disabled, lan setting do not prevent access to the discoverer server and son on...
Try to remove any java version he has on the computer and install a fresh new JRE.
Now try again.
Tamir

Oracle9ias Discoverer configuration page doesnt display discoverer plus.

Similar Messages

Maybe you are looking for