OracleADF and EBS compatibility

Dear colleagues,
I am witting an internal report for my company trying to put in black and white the advantages and disadvantages of OracleADF not only as a framework but as a solution.
Are OracleADF and EBS compatible? Sorry if the question is easy or silly, but I think that there are some things that should be taken to make it compatible if they are not fully compatible.
Thanks again for your time!!
Fern

Fern,
Search on the OAF forum OA Framework
We have discussed it a couples of times though to give you a summary, there are no standard guidelines, integration available for Ebiz with respect to ADF at present.
--Shiv

Similar Messages

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

How to Deploy 11g Forms and EBS Applications?

Dear All,
Just need to know some technical information regarding EBS.
Previously I have worked with Oracle forms and reports 6i and we used to deploy the application developed in this tool to publish using Application Server 9i/10g. I also have hands on experience on that.
Now after 4 years I am again trying to do some hands-on on later versions.
Just want to know that for Developer Suite 10g, If i developer the application it will be published using Application Server 10g? so that the user can access this application?
How EBS application is host and published?
Will really appreciate your kind help.
Thanks, Imran

How to Deploy 11g Forms and EBS Applications? Forms 11g is not certified with EBS 11i/R12
Just need to know some technical information regarding EBS.
Previously I have worked with Oracle forms and reports 6i and we used to deploy the application developed in this tool to publish using Application Server 9i/10g. I also have hands on experience on that.
Now after 4 years I am again trying to do some hands-on on later versions.
Just want to know that for Developer Suite 10g, If i developer the application it will be published using Application Server 10g? so that the user can access this application?
How EBS application is host and published?
Will really appreciate your kind help.Oracle Developer 10g comes as part of Oracle EBS installation, so no Oracle AS installation is required. You need need to install Developer 10g on your client to build forms/reports.
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
How To Bring Up 10G Forms Builder In R12 Environment? [ID 579318.1]
Thanks,
Hussein

Webcenter and ebs R12 integration

Hi,
We are having trouble with integration of WebCenter 11g PS3 with Oracle E-Business suite R12.1 in some of our ebs environments.
The step to set up E-Business suite portlet connection >WebCenter > Settings > Service Configuration > Portlet Producers > WRSP Producer failed with errors like :
Failed imports exist for producer /oracle/adf/portlet/E-Business Suite WSRP Producer_383c5156-9596-4eeb-a005-8b218dc41c33 which is currently not registered in this application.
A request to the producer URL "http://<host>:<port>/OA_HTML/portlets/WSRPServiceDescriptionService" resulted in a status 500 response with fault string "Internal Server Error (Caught exception while handling request: oracle.webdb.wsrp.server.ContainerRuntimeException: An internal error has occurred in method ConsumerRegistration.<init>())". The fault code given was "{http://schemas.xmlsoap.org/soap/envelope/}Server".
The attempt to register the producer with ID '{1}' for connection '/oracle/adf/portlet/E-Business Suite WSRP Producer_10ce66f7-704f-4512-be60-f297896a6eee' failed.
Also, tried with WLS command - same errors
wls:/ecm_domain/serverConfig> registerWSRPProducer('webcenter', 'E-Business Suite WSRP Producer', 'http://<host>:<port>/OA_HTML/portlets/WSRPBaseService?WSDL', timeout=100, server='WC_Spaces')
It basically timeout. If timeout increases, it takes longer to hit the same error.
This error is only occurring with setting connection to ebs running 2 apps nodes and on RAC database on 2 db servers. Anyone has integrated with ebs with RAC db and multiple apps servers successfully ? If so, what version of Webcenter and ebs ? I've logged an SR and has not progressed much in the last week or two.
I am not sure if this is the right forum, pls let me know if there are any other appropriate forum for this.
Thanks in adv,
Mary

Hi,
Were you able to resolve this issue?
Regards.

IPhoto 6 and Camera Compatibility

I recently upgraded my OS to 10.5.8 from 10.4... I know very late. I had no intention until the upgrade to my iPhone 3GS required it. Regardless, I am running IPhoto 6.0.6 and it has worked fine. I own a Canon T1i EOS Rebel digital camera. Up until the conversion to Leopard, I would plug the camera into the port and iPhoto would open up and transfer the pics without an issue. Today, I tried to upload pictures, the USB cord was secure on both sides and nothing happened. I turned the camera on and off twice to see if by starting it up connected would change things, nothing did. I ensured that the battery is charged in the camera and that the sleep setting was not tampered with thus not allowing it to transfer.
I am suspicious about the upgrade to Leopard causing this incompatibility issue with my camera. When I did a search on the apple website, the page about iPhoto 6 and camera compatibility is a dead link. So a couple of questions if someone would be kind enough to help me out with:
1) Is the import of pictures not occuring because of an incompatibility issue between my camera and iPhoto 6 suddenly? Or is incompatibility between 10.5.8 and iPhoto 6?
2) What is the best solution? Upgrade to iLife '11? Or will that require upgrading to Snow Leopard as well? Or is it better to buy the $129 bundle of Snow Leopard, iLife and iWork for compatibility issues?
3) Lastly, is there a webpage on apple that shows these compatibility issues? For instance, if I upgrade one thing in the future, all the other software suites that need updating as well?
Thanks in advance to whomever can help me.
Cheers,
-Tod

1) Is the import of pictures not occuring because of an incompatibility issue between my camera and iPhoto 6 suddenly? Or is incompatibility between 10.5.8 and iPhoto 6?
Neither. The usual cause for this issue can be a damaged plist file, a setting on the camera or Mac or minor directory damage on the card.
Plist file: Can you access the card with Image Capture (in your Applications Folder)? If so, you might try trash the iPhoto plist file, if not try trash the Image Capture plist file as well.
Settings: What's set to happen when you connect the camera? With iPhoto 6 that's in the Image Capture. Your camera has two modes for talking to the Mac: Mass Storage and PTP. What one are you set to? Try the other one.
Directory Damage: Have you tried using a USB Card Reader? Can the Mac see the card in that?
Regards
TD

DB vault and ebs R12

Hi All,
i am in the process of implementing database vault 11gR1 and ebs r12 12.1.1 in our test environment and like to know if anyone has implemented EBS r12 with the Vault before. If you do please share articles and/or doc regarding the implementation. what kind of policies and or permissions you would apply to
DBA, sys, system, apps users.
Thanks in advance!
regards,

Hello,
There is a note about this:
* Integrating Oracle E-Business Suite Release 12 with Oracle Database Vault 10.2.0.3 (OracleMetalink Note 566841.1)
* Oracle Database 10g Release 2 Vault Administrator's Guide
Please also refer to this link:
http://blogs.oracle.com/stevenChan/2008/05/oracle_database_vault_10203_ce.html
Kind regards
Mohamed
Oracle DBA

Info regarding Diswarrior 4 and Leopard compatibility

I emailed Alsoft regarding Diskwarrior 4 and Leopard compatibility. Here is the response I got.
+DiskWarrior 4.0 will successfully rebuild a disk that has Mac OS X 10.5+
+Leopard installed or a disk that has been attached to a computer running+
Leopard.
+However, some operating system functionality has changed within Leopard+
+itself. As such, there are some compatibility issues when running an+
+installed copy of DiskWarrior 4.0 while started up from Mac OS X 10.5+
+Leopard. Alsoft currently recommends that you do not run DiskWarrior 4.0+
+while the computer is started from Mac OS X 10.5 Leopard.+
+Instead, to run DiskWarrior, you should start up the computer from either:+
+1) A DiskWarrior 4.0 CD.+
+2) Any disk that starts up in 10.4.x and then run DiskWarrior 4.0.+
+An updated version of DiskWarrior that has complete Leopard+
+compatibility will be released soon as a free download for existing+
+owners of DiskWarrior 4.0.+
+-- What you can expect when running DiskWarrior 4.0 under Mac OS X+
+10.4.x and rebuilding a Leopard disk.+
+All features work as expected with one exception: FileVaults created+
+while started from Leopard are not visible to DiskWarrior 4.0 and cannot+
+be rebuilt (repaired).+
+-- What you can expect when running DiskWarrior 4.0 under Mac OS X 10.5+
+and rebuilding a Leopard disk.+
+While not recommended (and discouraged), if you do run DiskWarrior 4.0+
+while started from Mac OS X 10.5 you might encounter some problems such as:+
+1) There is a lengthy delay whenever DiskWarrior is determining which+
+drives are currently attached. This delay is dependent upon the number+
+of attached drives and may last up to 2 or 3 minutes. You will+
+experience this delay when first starting DiskWarrior, whenever a disk+
+is attached or detached while DiskWarrior is running but idle, and+
+whenever a rebuild is completed or canceled.+
+2) You cannot rebuild FileVaults or disk images.+
+3) In step 9 (comparing directories) of a rebuild, the progress bar+
+might get to 100% even though the comparison step is not finished.+
+4) When performing Check All Files and Folders the progress bar might+
+get to 100% even though the check is not finished.+
+5) After rebuilding a disk, DiskWarrior may report that some files or+
+folders have had their permissions changed. This is inaccurate and the+
+permissions have not been changed.+
+To repeat, an updated version of DiskWarrior that has complete Leopard+
+compatibility will be released soon as a free download for existing+
+owners of DiskWarrior 4.0.+
+-- What about DiskWarrior 3?+
+DiskWarrior 3 and earlier versions are not compatible with Mac OS X 10.5+
+(Leopard). Alsoft does not recommend running DiskWarrior 3 or earlier on+
+a disk that has Mac OS X 10.5 Leopard installed or a disk that has been+
+attached to a computer running Leopard.+
+-- Marc+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Marc Moorash, Alsoft Technical Support+
+Email: [email protected]+
So, it seems it will work but you need to run it from the disk or if you have it installed on a external drive running Tiger, it will work.
Thom

If you open your Tiger Address Book, select all cards, drag them to the desktop, it will make one big "mega-VCF" card with a name like "Alan Adams and 543 others.vcf" Dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine. They will all import just fine into your Leopard Address Book.
Try doing something similar with your iCal data, Open the application, choose your calendars one at a time, and select File > Export. That should make a big "mega-ics" calendar card with a name like "work.ics" or "home.ics, i.e., "originalcalendarname.ics" with all the events of that calendar. Then same drill: dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine.
Both generation methods create text files, which should import just fine into the Leopard applications.

Difference EBS 12 and EBS 12.04?

Hi all,
I was looking at new realise of EBS 12.04 now can be download.
I was installing and testing EBS 12 (over then 60.000 objects in datebases, jsp/applet UI have). Which differences is between
EBS 12 and EBS 12.04 ?
Thanks in advance
Gordan

From Steven Chan's Blog:
What's New in Release Update Pack 4?
As noted in my previous article about Release 12 Update 4, this RUP contains fixes for the following product families, with details in the corresponding Metalink Notes:
- Applications Technology (ATG_PF): Note 466974.1
- Business Intelligence (BIS_PF): Note 466634.1
- Customer Relationship Management (CC_PF): Note 467651.1
- Financials (FIN_PF): Note 469308.1
- Human Resources (FR_PF): Note 466091.1
- Support Diagnostic Tools (IZU): Note 403468.1
- Procurement (PRC_PF): Note 469316.1
- Projects (PJ_PF): Note 464581.1
- Supply Chain Management (SCM_PF): Note 469261.1
- Supply Chain Planning (SCP_PF): Note 469281.1
Apps Release 12.0.4 Rapid Install Now Available
http://blogs.oracle.com/schan/2008/04/02#a2575

DB and EBS cloning methods in exadata server

Hi
We are planning to migrate exadata server (Linux 5.3 OS) . My DB will be 11gR2 and EBS 12.1.2
My infrastructire will be like
1st Exadata server will hold PRD DB and application will be on sun linux server
2nd Exadat server will hold DR (only database) and DEV/UAT/TST instance (database) for these instance application will be on sun linux server.
this all sturecture will be with RAC and ASM.
As on DR server we are planning to have TST/DEV/UAT database and we use RMAN for DB backup. I would like to know the cloning (DB and EBS) methods (standards and customs) for existing environments. We want to clone my instance on daily basis from my runing DR site.
Kindly suggest some action plan.
Thanks
Krishna

Hi;
Please check below links
https://blogs.oracle.com/stevenChan/entry/ebs_exadata_whitepaper
https://blogs.oracle.com/stevenChan/entry/e-business_suite_exadata_v2
http://www.oracle.com/technetwork/database/features/availability/maa-ebs-exadata-197298.pdf
Is still have dubt please update here
Regard
Helios

Seagate ST9750420AS HDD and W700ds compatability issue

There seems to be a compatability issue with the Seagate 750GB drives (ST9750420AS) and the W700ds (and possibly other W series notebooks).
With the controller set to RAID in BIOS Windows 7 and possibly other OSs can not access the HDDs. This configuration results in a 7B "inaccessable boot device" error BSOD.
Testing revealed only the ST9750420AS with FW 0001SDM5 (the only FW avaible) results in the 7B BSOD regardless of the RAID driver version installed. I have not phiscally removed the Turbo memory device to see if it plays a role in the problem or not.
The W700ds (2757) system I have available to test is compatable with the following Seagate (drives with various FW versions):
ST9160823ASG
ST9500325AS
ST9500420ASG
ST9500420AS
ST9640320AS
These were tested with Widows XPP 32bit, Windows 7 64bit and Linux 64 bit, these were tested in both RAID and non RAID configurations.
And not compatable with:
ST9750420AS, tested with Windosw 7 x64 in RAID configuration.
Any comments, corrections or resolution welcom.
Thanks
JMG

Hi Jamessts,
Welcome to the HP Forums!
I have read your post on installing your HDD to your HP computer, and I would be happy to be of assistance!
To determine your product specifications, I will need to know what the Product and Model Number of your desktop is. The next piece of information I will need is the version of Windows you have on your computer.
Since you stated that the HDD works in another computer, I suggest following this resource: "Windows could not complete the installation..." solved by MarkBeacom. This should help in setting up your HDD for use on your computer.
Please post back with the results of your troubleshooting, and I will diligently follow up with you!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

[solved] Dependency hell with redland and redland-compat

It seems that redland and redland-compat are in conflict, but both are required.
I notice that the installed version of redland-compat provides redland, but the new version does not.
$ pacman -Qu
redland-compat 1.0.12-1
skype 2.1.0.81-5.1
$ sudo pacman -Su
:: Starting full system upgrade...
warning: skype: ignoring package upgrade (2.1.0.81-5.1 => 2.2.0.25-1)
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: audacity: requires redland
:: libreoffice: requires redland
$ sudo pacman -S redland
resolving dependencies...
looking for inter-conflicts...
:: redland and redland-compat are in conflict. Remove redland-compat? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: redland-compat-storage-virtuoso: requires redland-compat
:: soprano: requires redland-compat
Last edited by jlindgren (2011-04-28 03:41:39)

sl1pkn07@sL1pKn07 pacman.d]$ yaourt -S redland
Contraseña:
resolviendo dependencias...
verificando conflictos...
Objetivos (2): rasqal-0.9.25-1 [0,22 MB] redland-1.0.13-1 [0,18 MB]
Tamaño total de descarga: 0,00 MB
Tamaño total instalado: 3,44 MB
¿Continuar con la instalación? [S/n] s
(2/2) verificando la integridad de los paquetes [---------------------------------------------------------------------------------------] 100%
(2/2) verificando conflictos entre archivos [---------------------------------------------------------------------------------------] 100%
error: error al realizar la transacción (archivos en conflicto)
redland: /usr/lib/librdf.so.0 existe en el sistema de archivos
redland: /usr/lib/librdf.so.0.0.0 existe en el sistema de archivos
[sl1pkn07@sL1pKn07 pacman.d]$ yaourt -Qo /usr/lib/librdf.so.0
/usr/lib/librdf.so.0 es propiedad de redland-compat 1.0.12-3
[sl1pkn07@sL1pKn07 pacman.d]$
sorry. menssage in spanish

Custom Build AIA PIP between Siebel and eBS

Hi,
I have a project where in I am integrating Siebel and eBS systems.There are different process flow integrations that I need to integrate between these 2 systems.I know there is O2C PIP for integrating between these systems.But due to some reasons my company doesnt want to pursue using O2C PIP for integrations.So I would like to know
-> if there is any other PIP for this purpose OR
->If we can build a custom AIA PIP for this and what are the pros and cons of it and tasks we would need to do for successful integrations of different process flows? OR
->if there is any way in SOA suite that we can use to integrate between these systems for different process flows?I wanted to know how OracleASadapters (packaged based adapters) for Siebel can work in this case and pros and cons for using this adapters?
->if there is any other way,please let me know!
Thanks,
S

Hi,
I don't think we have any PIP other than O2C to integrate Siebel with Ebiz.
It is the matter of evaluating to what extent the out of the box PIP answers the integration requirement. As per my understanding no PIP suits 100% for any given business integration, it has to be tweaked for sure. It should be the architect decision comparing the effort of scratch development vs using PIP.
One has to understand the best practices for building AIA integration otherwise we end up making tightly coupled integration which make no sense of using AIA foundation pack. Read best practices of AIA development.
The core advantage of using AIA foundation pack is that enables the central hub of integration between any systems leaving a room for integration of other business applications. You can also build simple composites to integrate without following AIA principles but it is as simple as making P2P integration.
Thanks
Saikrishna Panuganti

RosettaNet and its Compatability with C-folders

Can I please get some info about RosettaNet and Its compatability with C-folders....
its urgent
regards
jay

I would imagine since SEEBURGER is involved in integration solutions
<i>For 20 years, SEEBURGER has been the expert in SAP business integration. More than 1,200 SAP customers both large and small utilize our B2B/EDI solutions and expertise to connect with their applications and trading partners.</i>
http://www.seeburger.com/index.php?id=sap&no_cache=1&sword_list[]=SAP
Unfortunately I have no way of testing but perhaps someone will see the new activity in the thread and pop in.

Backwards and upwards compatibility on essbase, EAC and Analyzer

we have running essbase/analyzer/EAC 7.1 environment and a running essbase/planning 9.3.1 environment.
It occurs to us that modifying the 9.3.1 environment with the EAS7.1 tool results in a essbase crash (without any information in the essbase log files).
Is there any information for essbase about upwards and backwards compatibility from 7.1 and 9.3.1.
Message was edited by:
Detlev

In addition to Nathan's comments this would be a platform that Oracle hasn't regression tested. So even if it were to appear to work if you encountered an issue Oracle would be justified and asking you to re-create the same issue on a supported platform.
In my opinion if this is a production application this is a risk you should not take.
If you are playing with an internal environment and want to learn more about Win2K8 that's one thing. Realizing most folks will give you the "It's not supported line" when you start asking why EPMA, FDM, and HFM do not work with IIS 7.x
Regards,
John A. Booth
http://www.metavero.com

OracleADF and EBS compatibility

Similar Messages

Maybe you are looking for