OracleAS Metadata Repository

Hi Everyone,
I inherited a system that is currently OAS 10.1.2.2 and looking into applying 10.1.2.3 patchset. I am reading about applying the 10.1.2.3 metadata Repository update. I was wondering if there is a way to determine if 10.1.2.2 metadata Repository update has been applied? I tried ldapsearch command but it returns nothing. Any ideas?
Thank you.
Troy

You may wanna note that,
- This patchset 3 10.1.2.3 does not require portal 10.1.4. This patch set brings up your OAS components to 10.1.2.3 version from 10.1.2.0.2 level.
- For those who are using portal 10.1.2.0.2 version, this patch set upgrades it to 10.1.2.3 as well - when they apply it on the portal repository.
- For those users whose portal version is 10.1.4.0.0, it upgrades it to 10.1.4.2 version - when they apply it on its portal repository.
- Metadata Repository upgrade is required in each case.
- It has been a standard practice from Oracle Support to ask you to upgrade to the latest supported version of that release number - for almost all of your problems. For 10g Release 2, 10123 and for portal 10142 are the latest supported versions which you get after this upgrade.
Therefore, for all of your problems regarding any component on your OAS or on portal, Oracle Support would recommend highly to first get up to the latest supported version. Then they will recommend individual patches or fixes on top of it.
hope that helps!
AMN

Similar Messages

  • What is OracleAS Metadata Repository home

    Hi Guys
    i was upgrading the portal .. during the upgrade i need to specify OracleAS Metadata Repository home MRUA script. what is this OracleAS Metadata Repository home . please help me to let me know what is this home is
    1. Oracle Internet Directory Home
    2. Oracle MRCA Home
    3. Oracle Portal Home
    4. Oracle Infra Database Home
    i am new to this world please help me in this.
    Thanks

    It depends upon the topology of your environment.
    - Do you have an infrastructure which has both an Identity Management and a Metadata Repository? If that is the case, MRep Home is your infra-home.
    - if the MRep is installed separately from Id Mgmt, then its home will be where it is installed.
    - Also, if you are using the default Portal home then it resides in the Metadata Repository. If you are using a Customer DB to launch your portal from, then the Portal Repository will be in that DB.
    Tell us about your architecture a little bit and it will be easier to answer.
    Hope that helps!
    AMN

  • Can not start opmn after change OracleAS Metadata Repository Listener Port

    Hello,
    I installed OracleAS metadata Repository Listener Port, And i change the port of the listener, then flowwoing the manual was needed start teh OID component
    But I won´t start

    Roberto,
    The tail of OIDCTL.log is:
    09/02/23 19:14:44 Start process
    oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
    09/02/23 19:58:44 Start process
    oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
    09/03/02 16:02:43 Start process
    09/03/04 15:57:21 Start process
    And the tail for oidmon.log:
    2009/03/02:16:02:43 * oidmon_u47pacrm01.unitec.mx:0 *
    Updating Process Table...
    2009/03/04:14:52:11 * Killed process pid = 1345
    2009/03/04:14:52:11 * Monitor Process id = 1345 Terminated
    2009/03/04:14:52:11 * Sent SIGTERM to process id = 1374
    2009/03/04:14:52:11 * ODISRV Instance 1 deleted from registry
    2009/03/04:14:52:11 * Updating Process Table...
    2009/03/04:14:52:11 * Sent SIGTERM to process id = 1370
    2009/03/04:14:52:11 * OIDLDAPD Instance 1 deleted from registry
    2009/03/04:14:52:11 * Updating Process Table...
    2009/03/04:15:57:21 * Connecting to database, connect string is te04as
    2009/03/04:15:57:21 * [gsdsiConnect] ORA-0,
    2009/03/04:15:57:21 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:15:57:23 * [gsdsiConnect] ORA-0,
    2009/03/04:15:57:41 * Connecting to database, connect string is te04as
    2009/03/04:15:57:41 * [gsdsiConnect] ORA-0,
    2009/03/04:15:57:41 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:15:58:01 * Connecting to database, connect string is te04as
    2009/03/04:15:58:01 * [gsdsiConnect] ORA-0,
    2009/03/04:15:58:01 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:15:58:21 * Connecting to database, connect string is te04as
    2009/03/04:15:58:21 * [gsdsiConnect] ORA-0,
    2009/03/04:15:58:21 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:15:58:41 * Connecting to database, connect string is te04as
    2009/03/04:15:58:41 * [gsdsiConnect] ORA-0,
    2009/03/04:15:58:41 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:15:59:01 * Connecting to database, connect string is te04as
    2009/03/04:15:59:01 * [gsdsiConnect] ORA-0,
    2009/03/04:15:59:01 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:15:59:21 * Connecting to database, connect string is te04as
    2009/03/04:15:59:21 * [gsdsiConnect] ORA-0,
    2009/03/04:15:59:21 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:15:59:41 * Connecting to database, connect string is te04as
    2009/03/04:15:59:41 * [gsdsiConnect] ORA-0,
    2009/03/04:15:59:41 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:16:00:01 * Connecting to database, connect string is te04as
    2009/03/04:16:00:01 * [gsdsiConnect] ORA-0,
    2009/03/04:16:00:01 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:16:00:21 * Connecting to database, connect string is te04as
    2009/03/04:16:00:21 * [gsdsiConnect] ORA-0,
    2009/03/04:16:00:21 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:16:00:41 * Error connecting database. -1
    2009/03/04:16:00:41 * Error : Guardian Process terminated
    2009/03/04:16:50:45 * Connecting to database, connect string is te04as
    2009/03/04:16:50:45 * [gsdsiConnect] ORA-0,
    2009/03/04:16:50:45 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:16:50:47 * [gsdsiConnect] ORA-0,
    2009/03/04:17:18:36 * Connecting to database, connect string is te04as
    2009/03/04:17:18:36 * [gsdsiConnect] ORA-0,
    2009/03/04:17:18:36 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:18:38 * [gsdsiConnect] ORA-0,
    2009/03/04:17:18:56 * Connecting to database, connect string is te04as
    2009/03/04:17:18:56 * [gsdsiConnect] ORA-0,
    2009/03/04:17:18:56 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:19:16 * Connecting to database, connect string is te04as
    2009/03/04:17:19:16 * [gsdsiConnect] ORA-0,
    2009/03/04:17:19:16 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:19:36 * Connecting to database, connect string is te04as
    2009/03/04:17:19:36 * [gsdsiConnect] ORA-0,
    2009/03/04:17:19:36 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:19:56 * Connecting to database, connect string is te04as
    2009/03/04:17:19:56 * [gsdsiConnect] ORA-0,
    2009/03/04:17:19:56 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:20:16 * Connecting to database, connect string is te04as
    2009/03/04:17:20:16 * [gsdsiConnect] ORA-0,
    2009/03/04:17:20:16 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:20:36 * Connecting to database, connect string is te04as
    2009/03/04:17:20:36 * [gsdsiConnect] ORA-0,
    2009/03/04:17:20:36 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:20:56 * Connecting to database, connect string is te04as
    2009/03/04:17:20:56 * [gsdsiConnect] ORA-0,
    2009/03/04:17:20:56 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:21:16 * Connecting to database, connect string is te04as
    2009/03/04:17:21:16 * [gsdsiConnect] ORA-0,
    2009/03/04:17:21:16 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:21:36 * Connecting to database, connect string is te04as
    2009/03/04:17:21:36 * [gsdsiConnect] ORA-0,
    2009/03/04:17:21:36 * [oidmon]: Unable to connect to database,
    will retry again after 20 sec
    2009/03/04:17:21:56 * Error connecting database. -1
    2009/03/04:17:21:56 * Error : Guardian Process terminated
    -----

  • Problems Installing Oracle Metadata Repository into Existing Database

    Folks,
    I'm slowly going through the process of installing the Metadata Repository into a 10g database, using RepCA I've managed to determine all the DB parameters required for setting etc. The only thing RepCA now reports is missing is the Ultrasearch schema & packages.
    I've copied the ultrasearch dirs from the RepCA distribution and placed them in my $ORACLE home dir, I've also attempted to run the admin install script 'wk0setup.sql' which throws out several errors listed below. If anyone has successfully gone through this process on Solaris I would love to hear your about your experience & advice.
    Error 1. =================================================
    User is WKSYS
    ... loading ultrasearch_db.jar
    call sys.dbms_java.loadjava('-v -f -r -s -g PUBLIC $ORACLE_HOME/ultrasearch/lib/ultrasearch_db.jar', '((* wksys) (* public))')
    ERROR at line 1:
    ORA-29532: Java call terminated by uncaught Java exception:
    oracle.aurora.server.tools.loadjava.ToolsError: Error during loadjava: Failures
    occurred during processing. Check trace file for details
    Error 2 (File Doesn't exist at all) ==============================
    SP2-0310: unable to open file "/oracle/1020a/ultrasearch/admin/wk0launchq.pkh"
    Error 3 (Again the file doesn't exist at all) ========================
    SP2-0310: unable to open file "/oracle/1020a/ultrasearch/admin/wk0launchq.plb"
    ===========================================================
    Regards
    Austin

    Hi guys,
    I have used copy of that package from Oracle Identity Management installation, version 10.1.4.0.1 and have been able to complete manual Ultra Search installation. It's valid in dba_registry. After that I did run RepCA and metadata schemas have been created successfully in existing database, version 10.2.0.2. Be careful about database version, only 10.2.0.2 is certified with Oracle Identity management, so you need to run patch for upgrade to 10.2.0.2.
    Hope this helps.
    Dali
    Message was edited by:
    dallyz7

  • Kernel Parameter Settings for OracleAS Metadata Repository

    OS: SuSE Linux Enterprise Server 9
    Ref:
    http://download-west.oracle.com/docs/cd/B15790_07/install.1012/install/reqs.htm#BCFGGCGE
    2 (a) Using any text editor, create or edit the /etc/sysctl.conf file and add or edit lines similar to the following:
    kernel.shmall = 2097152
    kernel.shmmax = 2147483648
    kernel.shmmni = 4096
    # semaphores: semmsl, semmns, semopm, semmni
    kernel.sem = 256 32000 100 142
    fs.file-max = 131072
    net.ipv4.ip_local_port_range = 10000 65000
    kernel.msgmni = 2878
    kernel.msgmax = 8192
    kernel.msgmnb = 65535
    I do not have sysctl.conf file under /etc.
    I have changed some required values from
    /proc/sys/kernel/msgmnb -- enter 65535, it was lower value b4
    /proc/sys/kernel/msgmni -- enter 2878, it was lower value b4
    /proc/sys/net/ipv4/ip_local_port_range --- enter 10000 65000 ,I added only 10000, it was 1000 b4.
    Is it ok to change like that?
    where is the sysctl.conf file?
    Regards,
    D

    2 (a) Using any text editor, create or edit the /etc/sysctl.conf

  • Can I install Metadata Repository for 10.1.2.0.2 on Oracle 10.2.0 database

    Does any one know if the Metadata Repository of OracleAS 10.1.2.0.2 can be install on an existing Oracle 10.2.0 database ?
    The MRCA tool is giving me this message "Oracle Metadata Repository cannot be loaded into this version of the database. Please see the installation guide for more information on supported database versions ...."
    Kim

    According to the Installation Guide, Oracle9i Release 2 (9.2.x) and Oracle Database 10g Release 1 (10.1.x) are supported. See the following for more specific information:
    http://download-west.oracle.com/docs/cd/B14099_19/sol.1012/repca.1012/repca/intro.htm#CHDEAJFB

  • Errors running MRUA for Metadata Repository Upgrade to version 10.1.2.0.2

    Hi,
    I am encountering the following errors trying to run the MRUA for our Metadata Repository Upgrade on an AIX 5.3 box:
    <mrua_runs> ../mrua/mrua.sh -oracle_home /u01/oracle/product/9.2.0.8 -oid_host ourhost.domain.com -oid_ssl_port 3130
    Executing mrua.pl
    Running on UNIX
    OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.1
    Enter the password for SYS: <syspw>
    Enter the password for cn=orcladmin: <pwd>
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/oii/oiio/oiiol/OiiolTextLogger
    at oracle.ias.repqueries.RepositoryQueries.formatGlobalDBName(RepositoryQueries.java:603)
    at oracle.ias.mrua.RepQueries.getDBInfo(RepQueries.java:180)
    at oracle.ias.mrua.Util.getTheDBInfo(Util.java:50)
    at oracle.ias.mrua.MRUA.getInfoFromOID(MRUA.java:690)
    at oracle.ias.mrua.MRUA.driver(MRUA.java:297)
    at oracle.ias.mrua.MRUA.main(MRUA.java:193)
    MRUA detected an error at /mnt/MRUA/mrua/mrua.pl line 237.
    <mrua_runs>
    Before running the MRUA for the Metadata Repository:
    1. I have just recently completed a Middle Tier and Identity Mangement upgrade to 10.1.2.0.2 from version 9.0.4.1.
    2. I was able to successfully run the MRUA upgrade script for upgrading our Portal Repository (customer database).
    Our Metadata Repository database is at version 9.2.0.8. Has anyone seen these errors or had this problem?
    The MRUA CD that I have is labelled "Oracle Metadata Repository Upgrade Assistant and Utilities 10g (10.1.2.0.2) for AIX based systems".
    But in the errors I see "OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.1". Is something wrong there? Should it say 10.1.2.0.2?
    Any help would be greatly appreciated.
    Thanks.
    CV
    Hi,
    I have downloaded the 10.1.2.0.2 version of the MRUA and tried the upgrade again. This time I see the following errors:
    Executing mrua.pl
    Running on UNIX
    OracleAS Metadata Repository Upgrade Assistant 10.1.2.0.2
    Enter the password for SYS: <syspwd>
    Enter the password for cn=orcladmin: <pwd>
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/oii/oiio/oiiol/OiiolTextLogger
    at oracle.ias.repqueries.RepositoryQueries.formatGlobalDBName(RepositoryQueries.java:603)
    at oracle.ias.mrua.RepQueries.getDBInfo(RepQueries.java:180)
    at oracle.ias.mrua.Util.getTheDBInfo(Util.java:50)
    at oracle.ias.mrua.MRUA.getInfoFromOID(MRUA.java:784)
    at oracle.ias.mrua.MRUA.driver(MRUA.java:290)
    at oracle.ias.mrua.MRUA.main(MRUA.java:186)
    MRUA detected an error at /mnt/MRUA_downloaded/ohome/mrua/mrua.pl line 239.
    Thanks.
    CV
    Edited by: CV on Jul 28, 2009 1:37 PM

    Hi,
    Found out from Oracle that the "oracle/sysman/oii/oiio/oiiol/OiiolTextLogger" class is in the $ORACLE_HOME/oui/jlib/OraInstaller.jar file and as per their suggestion added the jar file to the $classpath list of jar files in the mrua.pl script. I tried running the MRUA again, and ran into the following errors:
    Exception in thread "main" java.lang.NullPointerException
    at oracle.ias.mrua.MRUA.formatHostPortSid(MRUA.java:1449)
    at oracle.ias.mrua.MRUA.getInfoFromOID(MRUA.java:794)
    at oracle.ias.mrua.MRUA.driver(MRUA.java:290)
    at oracle.ias.mrua.MRUA.main(MRUA.java:186)
    MRUA detected an error at /u01/oracle/mrua_runs/MRUA_downloaded/ohome/mrua/mrua.pl line 243.
    I am still troubleshooting. So if you have any ideas please let me know.
    Thanks.
    CV

  • Can Portal and OID Metadata Repository be shared?

    Hi
    I am designing a solution for my client which includes Portal and OID implementation. I was then posed the question whether the portal and oid metadata repository should be shared. Is there any best practice that anyone can share? Thanks!
    Regards
    Dave

    Hi Dave,
    I had faced this question once & I opted to use a separate Database for the Portal Schemas.
    I am not aware of any document that details the best practices - but, my deisgn was based on the fact that the Portal Schemas would grow in future based on the number of Portal Pages & Applications. Our Client had forecast hat they would be using Portal quite heavily & hence, a separate MR was the way to go for us.
    We just installed a new Oracle Database, used the Oracle Metadata Repository Creation Assistant & registered the database with Oracle Internet Directory. During the installation of Portal, the Oracle Universal Installer offers a choice of Metadata Repositories for the Portal Schema.
    Regards,
    Sandeep

  • Moving metadata repository

    Is it possible to move a repository from one instance to another on the same machine?

    Hi,
    you are not in the worst scenario but almost... :(
    Oracle infraestructure is a significant limitation. It is completely unsupported to change the hostname of a machine hosting an OracleAS Metadata Repository. This is because during the install the hostname is written to many different places in the Metadata Repository and as such it has not been possible to provide a script to change the hostname references within the repository.
    You are not in the worst scenario because the hostname in your case is the same, but takes into account that MDR is not intended to be moved (or migrated .. je!)
    Please read metalink note 458372.1 to see the differents scenarios
    Let me know if this help,
    Julio

  • BusinessObjects Metadata Repository and Oracle RAC

    What are the implications of having the BusinessObjects Metadata Repository reside in an Oracle RAC Database?  Is it doable?

    Yes, you can install BO repository on Oracle RA.Cluster.
    Make Sure with support is Oracle RAC 11g R2 is feasible or not. Till 11G R1 it was working fine.
    Thanks,
    Anil

  • Error in Installing SSO Metadata Repository Creation Assistant (10.1.4.3.1)

    I am trying to Install Portal Forms Reports 11, so I had to Install all prerequisites
    My Machine Specifications:-
    1- Oracle Enterprise Linux 5.5 x86-64
    2- DB 11g R2
    3- WebLogic 10.3.3 (X64)
    4- Oracle Identity Management 11.1.1.2.0
    I was executed the inspre11.pl with -op1
    than I was trying to Install SSO Metadata Repository Creation Assistant (10.1.4.3.1)
    in the last step (Step 7 - Loading Repository)
    http://lh3.ggpht.com/_bMH90GEkTL4/SwW1jlNHzFI/AAAAAAAABjE/ZZm55usPKu0/s1600-h/clip_image054%5B3%5D.jpg
    I encountered this error :-
    ERROR - Unable to connect to the database. See the log file for details. Check that you have provided the proper service name for the database, that the database is running, the database connection information is valid, and that the database is set up for password file authentication. For more information, click the Help button.:ORA-06550: line 1, column 7:
    PLS-00201: identifier 'DBMS_IAS_VERSION.SET_COMPONENT_LOADING' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    what can I do ? my Database is start up and the connection is OK !!!!!!!!!!!
    I followed the oracle documentation:-
    Installation Guide for Oracle Identity Management 11g Release 1 (11.1.1) E12002-02 October 2009
    now we are going to 2011 !!!!!!!!!!!!!!!!!!!
    Is there another newer Installation guide from oracle?
    thank you

    Good question, rozester.
    I encountered this problem also, while trying to install the SSO MRCA 10.1.4.3.1 on 64-bit RHEL5 (though it's at version 5.7 but I'm positive that won't make any difference to the result).
    This may or may not match your situation, but when I looked in the log file $ORACLE_HOME/assistants/repca/log/repca_<datestamp>.log, I saw what was probably the reason behind the error:
    <$ORACLE_HOME>/bin/sqlplus: error while loading shared libraries: libclntsh.so.9.0: cannot open shared object file: No such file or directory
    I think I remember seeing that the link operation during installation had failed, but I hoped it would be OK. And it possibly would have been, if I'd remembered to specify the destination database Oracle home rather than the SSO MRCA Oracle home when prompted (on the page where it asks for database home and log file path). Perhaps then it would have used the sqlplus binary from the database oracle home, and since that one definitely works, it might have worked. But before I thought of that, I did a workaround; I installed the SSO MRCA on a 32-bit RHEL5 box (using the same directory paths) and copied the shared library files to the 64-bit box's shared library directory via scp as follows:
    cd $ORACLE_HOME/lib; scp -pr * oracle@rhel64box:$PWD/
    When I re-ran $ORACLE_HOME/runRepca, it then worked without error. Another thing I could have tried is just running runRepca on the 32-bit RHEL5 box, and that probably would have worked too, but it probably would have been a lot slower compared to running it locally on the destination server; it's takes quite a while as it is.
    Hope this helps. I'm sure it'll help me if next time I do this I forget what I did before and go searching again ;-)

  • Metadata Repository Creation Assistant fails with ORA-01119

    <!--[if gte mso 9]><xml>
    Normal
    0
    </xml><![endif]-->
    Hi All,
    My DB version is 10.1.0.2 and I've upgraded the same to
    10.1.0.4.2
    In order to install B2B, I started off by installing the
    Metadata Repository Creation Assistant.
    After the initial steps, I got the following message:
    <h5>
    OracleAS RepCA was not able to find the Oracle Text Supplied
    Knowledge Base in the database specified. </h5>
    <h5>If you are planning to use this repository for installing
    OracleAS Portal, you have to install Oracle Text Supplied Knowledge Base.
    Oracle Text Supplied Knowledge Base can be installed in the database using
    Oracle Database 10g Companion CD.</h5>
    <h5>
    If you are not planning to use this repository for
    installing OracleAS Portal, you may continue further. Continue? Yes/No?</h5>
    I continued with "Yes" and I chose the storage option as
    "Regular or Cluster File system". In the next step -<strong>Specify Tablespace
    information</strong>, I chose to install it in the C:\ , where there was approx 18GB
    of free space. Yet, I encountered the following error:
    <h5>
    Unable to create tablespace. Please see the OracleAS RepCA
    log file for more details.</h5>
    <h5>ORA-01119 error in creating database file 'string'</h5>
    <h5>Cause: Insufficient space on device or invalid database file
    path.</h5>
    <h5>Action:</h5>
    <h5>a) Verify the database file path specified.</h5>
    <h5>b) Decrease the size of the requested file or allocate a
    file on another device with more available space. If a file size was not
    specified in the statement, then specify a file size smaller than the available
    space on the device.</h5>I have verified the database file path. I also tried
    decreasing the size. I further tried using another directory where there was
    11GB of free space. It still didn't work.
    Please HELP!
    -Suhas.

    Hi Suhas,
    Can you please do the following?
    1.     Please try pointing to C:\b2b.dbf file during installation and see if the installation goes fine or not.
    Regards
    Vipin R.S

  • Can OID/IM components be moved to a new Metadata Repository?

    Hi
    I've looked around on Metalink but can't find any document that suggests this can be done, but I thought I would ask the question anyway (two iin fact):
    1. Can an existing OID/IM setup be configured so as to oint to a new metadata repository? Is it possible to install a new MR and then associate the IM components away from it's existing MR to a new MR?
    2. In an OracleAS Cold Failover Cluster (IM) topology, I've read contradictory notes (or I've misunderstood). Do the OID and MR components have to be on the same box? Or can they be on different boxes?
    Regards
    Andy

    #1, refer this:
    http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/chginfra.htm#BGBDDDBE
    #2, refer following note on MetaLink:
    368688.1 Master Note:How to Split AS10G Infrastructure Components Including the Metadata Repository and Identity Management
    Hope this helps.
    Thanks
    Shail

  • 9.0.4.1 Metadata Repository in 9.2.0.6

    I just upgraded my 9iAS infrastructure and mid tier with BI and Forms from 9.0.2.3 to 9.0.4.2. We had all the components on one server except we had a separate 9.2 db for our portal repository.
    I want to know how to migrate my metadata repository to a different server and use database version 9.2.0.6. Are there any documents or specofic sections of documents which could guide me in this migration?

    I am not familiar with the document you refer to, but suspect you should apply the 9.0.4.2 patch if you want to integreate OCS with a 10g portal.
    I have successfully integrated a 9iAS portal with R2 OCS (9.0.4.1), and the following details may be worth a closer look:
    1. To my knowledge, the passwords for your portal user and SSO user (orasso) are encrypted and stored in OID based on the hostname and IP address of your SSO server. Thus, the password for orasso and portal will differ between your portal Infra and your OCS infra, resulting in that only one of the two will work properly with your common OID. run the attached script on both your SSO servers and compare the result:
    #!/bin/ksh
    OIDHOST=antares1.i2sp.no
    OIDPORT=4032
    echo "Enter the desired Oracle schema name (default orasso): \c"
    READ DBUSERNAME
    if [[ -z $DBUSERNAME ]]; then
    echo "No schema value entered, using default:orasso"
    DBUSERNAME=orasso
    fi8
    echo "Enter the password of the cn=orcladmin user (usually the ias installation password): \c"
    stty -echo
    read OIDPW
    ty echo
    echo "Looking up schema password from $OIDHOST:$OIDPORT"
    $ORACLE_HOME/bin/ldapsearch -h $OIDHOST -p $OIDPORT -D "cn=orcladmin" -w "$OIDPW" -b "cn=IAS Infrastructure Databases,cn=IAS,cn=Products,cn=OracleContext" -s sub "orclResourceName=$DBUSERNAME" orclpasswordattribute
    Setting the password for orasso and portal to the same encrypted string is a good start. If they differ, change to the same encrypted string using "alter user orasso identified by xxxxxx" in sqlplus.
    Hope this will help you on the way :-)

  • OAS 10g metadata repository creation assistant & database version issue

    Hi,
    I have to install Oracle Application Server 10.1.2.0.2 on a server which already has an Oracle database 11g running on it and I dont want to install another database due to the load factor. I am not sure if I could use that database
    (version 11g) for the metadata repository. I know that we can use an existing database for the creation of metadata repository using the metadata creation assistant but I am a bit worried about the version of the database which is 11g whereas the application server and the metadata creation assistant both are 10.1.2.x.
    Your help is highly appreciated.
    Cheers,
    Omer

    MRCA 10.1.2.0.2 cannot be used to install a repository in an 11g database. If you want to use MRCA 10.1.2.0.2 with an 11g database, you will need to install a 10g database first, create the metadata repository and then upgrade the database to 11g. Not applicable in your environment as you already have a 11g database.
    Regards,
    EJ

Maybe you are looking for

  • How to use JDeveloper for OA Framework in Personal Computer

    Hi All, I have downloaded Jdeveloper with OA extension on my laptop. Now I want to do some exercises. But I dont know how to find dbc file and login details to use it. Can sombody help me please. Thanks Bhupendra

  • How can I get Thumbnails back in the file View Menu?

    My computer died and I had to re-install CS6.  I had originally installed it to an external hard drive expecting that I could just hook up a new computer when the time came and everything would work as before.   Not to be.   I contacted Adobe and got

  • Keyboard key not working

    Hi I left my mac over the weekend and not use it at all and I came back after the weekend to find that my 't' key isn't working. It works on my wireless keyboard so I am guessing its an error on the key but I have never know it happen to just a singl

  • Advise on Wireless and 7921G

    I have been asked by my boss to add some Cisco 7921 phones to our network. Currently we dont have wireless coverage. The wireless will be installed purely for voice. Can someone advise me on, or point me to some docs, to ensure I set the wireless up

  • Photoshop cs5 reinstall help

    I uninstalled all of my stuff on my hardrive and saved them to my hardrive and now I cannot reinstall them. It says that '' The Program can't start because aif_core.dll is missing form your computer''