OracleASFormsReportsServices10g_90401_Windows.exe
from http://www.oracle.com/technology/software/index.html
in the middleware section I select "Forms & Reports Services"
then "Oracle Application Server Forms and Reports Services 10g (9.0.4.0.1) for Microsoft Windows"
I get the license page and accept
I click the link "OracleASFormsReportsServices10g_90401_Windows.exe"
and get
"We're sorry, the page you requested was not found.
We have recorded this error (404) to help us fix the problem.
You may wish to try again using one of the tools below. "
Is this link rot? Is there another place to download from?
Jeff at Oracle told me that the link is broken and that forms and reports is not available for 10.1.3. He said what I need to do is use AS 10.1.2.0.2, which comes with forms and reports. So, I will be uninstalling 10.1.3 and using 10.1.2.0.2. YIKES!
Similar Messages
-
OracleASFormsReportsServices10g_90401_Windows.exe link broken in OTN
I'm trying to download the Forms and Reports Services version 9.0.4 for Windows but the link is broken in OTN. Can anyone point another download location?
Dear list moderator, please try to help me instead of deleting this post.
RodrigoYour previous thread was not deleted; it was moved to the "Downloads" area where it belongs.
Cheers, OTN -
Can't download forms and reports server
for 2 days now i have tried to download this.
from http://www.oracle.com/technology/software/index.html
in the middleware section I select "Forms & Reports Services"
then "Oracle Application Server Forms and Reports Services 10g (9.0.4.0.1) for Microsoft Windows"
I get the license page and accept
I click the link "OracleASFormsReportsServices10g_90401_Windows.exe"
and get
"We're sorry, the page you requested was not found.
We have recorded this error (404) to help us fix the problem.
You may wish to try again using one of the tools below. "
Is this link rot? Is there another place to download from?Try a different browser.
-
Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7ba58
Exception Code: c0000005
Exception Offset: 0002e3fb
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button. -
My itunes wont open and i cannot find an itunes .exe file
my itunes wont open and i cannot find an itunes .exe file
I have this same problem and when I go to the control panel to uninstall itunes, I can't do that either. I have been trying to uninstall so I can reinstall. Hopefully someone has an idea.
-
Hello,
I am using LV 8.6.1 with the 1.13 report generation toolkit and I am having problems getting my built exe to work. I am trying to open an excel template and populate it with new data. I have broke the vi down to just opening excel - opening the template and then fill in some data. But at this point excel does not open at all. And naturally everything works fine in the development environment.
Error Code: -2147352573
Member not found in NI_ReportgenerationToolkit.lvlib:
Excel_open_workbook.vi
NI_Excel.lvclass: new reportsubvi.vi
I read a few help pages that said to add \vi.lib\utility\NIreport.llb and LVclass directories to the project folder and add them to the always include section of the build. But no luck so far.
Side question: The machine I want to use this on has 8.6.1 Full which does not have the extra excel functions that my developer has. Is there a way to install the DEV report generation toolkit in the full version? Then I would not need to build an exe.
UPDATE: I just tried the exe on a different machine that has a developer suite installed and it worked fine. So I guess I need to find out what else I need to add to the build to make it work.
Message Edited by _Bryan on 06-16-2010 11:58 AM
Solved!
Go to Solution.There should be some info on this in the KB.
But first you should make sure that your version of the report generation toolkit actually supports excel 2000 (which is 10 years old)
That should be in the release notes of the toolkit
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
Report Generation Toolkit error when running exe not vi
Unknown System Error in Get Report Settings.vi->Get Current Font.vi->Excel Easy Table (str).vi->insert table and save file.vi->80x test suite.vi
1. The above is an error I get from my exe
2. I do not get this error when just running the vi.
3. On several report gen functions cohersion dots are on my refnum input. Is this the cause of my problem with the exe?
I guess there is an another learning curve when dealing with the app builder.
Any suggestions would be appreciated.
Thanks
Brian
CLAD
Brianforget what i wrote. it was my vi.
funny, most of the time it aint LabVIEW causing the problem but the program itself.
Brian -
Report generation toolkit VI error when running EXE
A VI inside the Report Generation Toolkit (version 1.1.2), Excel Find Application Directory.vi, will not function correctly when running an EXE. The "Current VI's path" block will return the path of the currently running EXE rather than the path of the Excel Find Application Directory VI. (The same would be true for Word Find Application Directory.vi.)
-Joel
Solved!
Go to Solution.Have you had a look at this knowledgebase article? The error is caused due to the exclusion of any dynamic VI.
Ipshita C.
National Instruments
Applications Engineer -
How do I perform an Open VI Ref for a VI in my EXE?
Good evening,
I'm building a LV8.5 VI into an EXE using application builder. I am trying to get a reference to a SubVI using Open VI Reference. When I wire the subvi name as a string, I get an Error 1004 failure and the dialog says "the VI is not in memory".
I also tried the Open VI Reference by wiring a path that includes the EXE name prepended C:\MyApp\MyEXE.exe\MyVI.vi
When I tried this I got an Error 7 for File not Found
Does anyone know the proper way to include a SubVI in an EXE to be accessed later with Open VI Reference? I'm not certain if my VI that I'm loading dynamically was actually included in my EXE or if I'm providing the correct location for Open VI Reference.
Any advice or examples is appreciated. I'm using LV8.5 with the application builder.
Thanks,
Chris Norris
Embla Systems, Inc.This definately sounds like you have not placed your vi into your executable. When you dynamically call a vi, it is not included automatically into the exe. You have to add it as a support file. There is a window in the exe builder where at the top left you select your "top level vi" then below that your "support vis" Make sure that the vi you are trying to call is included in the support vi list.
If you are always calling the same vi, even multiple times, there is a way to get the path without as much bother. Create a static reference to your vi. It is a little icon into which you place your vi on the diagram. Pull the reference from this, then use the properties vi to get the path. Open your vi reference using this path. Do not use the static reference to do things to the vi, as this can cause problems for you, especially if close the calling vi.
Good luck,
CyberTazer
Software Systems Engineer -
Dear All,
I created one LabVIEW application file for report generation (using Excel Template).
While I run the program in programming mode it works well and create the report file in the specified path.
After creation of the application file(exe), it gives the correct path of where the excel template is placed. The same path is given to New Report.vi, but it gives the error 'File Not Found'.
Tell me, is any other configuration required for generating Excel reports? (During exe application mode)
Give me the solution.
Thank You
Jegan.Hello,
Most likely you are encountering a problem of stripping and/or building paths. Probably the easiest thing to do is put a couple indicators on your front panel for the path or paths you care about, build your exe, and make sure you are really using the path you'd like. If you always put the report at some deterministic place relative to the exe (that is, even it the exe is moved, it will go with the exe and remain in the same relative path location, then you can use the Current VIs Path funtion found in the ... File I/O -> File Constants palette as a start path (where you will want to strip at least the exe name off of course).
I think this will bring some clarity to the issue!
Best Regards,
JLS
Best,
JLS
Sixclear -
Error while running sawserver.exe file
Hi All ,
I installed OBIEE 11.1.5 in my machine and Database is in different machine (For RCU) .OBIEE reports are working fine but, I tried to run sawserver.exe file to register new instanceconfig file to implement multiple rpds and Catalogs in OBIEE 11G by referring the below link.
http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/
Command that I used is : sawserver.exe -c D:\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfigdemo.xml
Am getting the Error : the procedure entry point long jmp count not be located in the dynamic link library orauts.dll
Thanks in Advance .Hi,
How can i do it in OBIEE 11G? Any help will be grateful
Regards,
Joni -
I have Azure SDK 2.5 installed and when I try and publish my web role from VS 2013, it fails. When I manually upload the package and config through the Azure Portal I get the error: "Invalid application runtime - a runtime component
is missing:/base/x64/IISConfigurator.exe".
I have tried uninstalling and re-installing the Azure SDK with no change in the error.
Any ideas how I can troubleshoot this?I uninstalled the SDK, and tried to create a new cloud servce using the WCF service project template. The new project still gives me the same error:
The file provided is not a valid service package. Detailed error code: WCFServiceWebRole1 Invalid application runtime - a runtime component is missing:/base/x64/IISConfigurator.exe. -
Rwbld60.exe error while calling a graph wizard from reports 6i.
Hi,
I have a latest patch 4f installed on my machine for reports 6i. When i call a graph wizard from my reports i am getting a program error saying "rwbld60.exe has generated errors".
How do i confirm that my new patch is installed successfully.
Thanks in adv.
ShaileshI'm getting this also. I thought it was
due to my use of DATA PARAMETER. I've
logged TARS on this and have yet to hear
back from Oracle.
Maybe if enough of us get the error Oracle
will give some guidance on this one. -
When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.
-
ITunes.exe Error Message
Grateful for any help advice out there.
I am unable to copy songs for iTunes 6 to my iPod video, even though there is plenty of space left on the iPod. I can upload music from CDs to iTunes, but when I attempt to transfer them to the iPod nothing happens, and I get the following message:
iTunes.exe - corrut file
\iPod_Control\iTunes\Temp File is corrupt and unreadable. Please run chkdsk utility.
I am not particularly IT literate and would appreciate any advice or assistance on what I should do.
Sony laptop Windows XPcompton anstey,
This article addresses the issue you are experiencing:
http://docs.info.apple.com/article.html?artnum=300554
Maybe you are looking for
-
IPhoto 11 photo book save placed photos
I made a photobook for my client. She likes it. I took over 150 photos and used 48 photos for the book. In the photobook screen, the photos I placed in the book are check marked. The ones not used are clear. Is it possible to extract only those plac
-
Radar plot with category label changed
Hi I tried this example vi, Line Graph (Excel).vi, with some modification as shown in the attached picture. I changed the plot to a xlRadar. After I run the vi, I got the result as shown in another attached picture. I would like to know how to change
-
Question on Numbers Formula:
Hello Guys, Thanks in Advance for all those who attempt to solve my question. I am preparing a numbers file that helps me track my expenses. I would like to know a formula that i should apply on a table that basically sorts and populates all the enti
-
I want to download movies onto my pc and then onto my ipod touch! is there a way
-
How to leave BT Broadband/Calls with minimum fuss ...
moved as I was replying If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on 'Mark