OracleConcMgrVIS_baba service on local computer started and stoped

Hi Fadi and Hsawwan,
After completion of my Oracle12 instalatin I found few post erros e.g. 50015 with HTTP, JSP, PHP error and i'm able to fix with these errors with rapidwiz - restart. One of my service OracleConcMgrVIs_baba is not starting?
I try to start manually but no success. Any suggestions?
Do I need to uninstalled this service and install it again?
Cheers
Ajit

Duplicate thread (Please post only once):
OracleConcMgrVIS_baba service on local computer started and stoped
OracleConcMgrVIS_baba service on local computer started and stoped

Similar Messages

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The OracleXETNSListener service on Local Computer started and then stopped.

Hi,
I practiced with APEX till yesterday.
Today I'm not able to start OracleXETNSListener, thus not able to open APEX workspace.
Whenever I tried to start the listener I got the message below:
"The OracleXETNSListener service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service."
FYS, I have very limited knowledge about database.
I read about the solutions posted in this forum but couldn't understand.
Below are the files in ..\NETWORK\ADMIN\.
Would appreciate your help.
C:\OraXe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\OraXe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\OraXe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = GYEON)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
..\sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES = (NTS)
(I changed (NTS) into (NONE) after reading one article but did not work out. So I changed back to the original setting.)
..\tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = GYEON)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Thanks,
Guy
Message was edited by:
GUY
Message was edited by:
GUY

Hi,
Thank you for your advice.
-) the name of your machine is GYEON? YES
-) have you started a firewall? Don't know but I have Norton Anti virus program running.
-) have you changed your IP-address? Time to time it gets changed automatically.
Followed your steps and got the messages below.
Would appreciate your further help.
While stopping,
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
While starting,
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in us
32-bit Windows Error: 48: Unknown error
When tnsping XE,
TNS-12541: TNS:no listener
Thanks,
Guy
Message was edited by:
GUY

When starting the AMDS it just says "the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs."... help?

when trying to fix the ipod syncing/recognition by starting the AMD (apple mobile device) in admin tools section on my computer it came up with the message in the question aboce (the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs.)
i have restarted my comp etc and reinstalled itunes... recurrent issue.
note - i wiped my ipod before this issue occurred, does this affect the problem?

I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Next see the the other actions of the following concerning the AMD
iOS: Device not recognized in iTunes for Windows

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support

Wndows could not start the SQL Server (MSSQLSERVER) service on Local computer

I have 2 instance of SQL Server in same server. A is installed first and B next.
Somehow A cannot start at all when I try to start from Windows Services.
B can be started normally.
A worked normally week ago. There has been only one thing what I may have to server since that.
I have installed MondoDB. Currently MondoDB it is stopped.
windows could not start the SQL Server (MSSQLSERVER) service on Local computer
Error 31: A device attached to the system is not functioning.
Kenny_I

I don't see anything special in event logs.
Data file of both SQL Server instance are located on same C drive of same server.
Kenny_I
Hello Kenny,
The main issue is not related to SQL server .SQL is at receiving end its hardware or the cables ( not sure which one) are the one causing issue.
I serached
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/111da2ae-0a86-41a5-ba03-7d1c0cc91ea9/windows-error-code-31a-device-attached-to-the-system-is-not-functioning-properly?forum=wdk
http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6467
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?

I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8

Could not start the oracle service on local computer

Could not start the oracle service on local computer, did not return an error blah, blah.
I am running Oracle 9i r2 Windows, and have choosen to start my instances manually. When i start them up I get the above error message. But if I am a little patient the services do start up and all is fine, so far as i can see anyway.
I am curious to know why does this error message arise.
Thanks in anticipation
Fergus

To start the database in windows you have to start first the OracleService<SID> service.
These are the steps that you have to do at the command line:
NET START OracleService<SID>
SET ORACLE_SID=<database sid>
sqlplus /nolog
conn sys/password as sysdba
startupJoel Pérez
http://otn.oracle.com/experts

Error 3: "Windows cannot start the Firefox Service on Local Computer...?

When I click on the Services option under Microsoft Management and try to start the FIREFOX SERVICE I get this hiccup:
'''Windows could not start the Firefox Service on Local Computer;
Error 3: the system cannot find the path selected'''
...Any suggestions on how I can hep Windows find that path?
--I have a heck of a time getting windows to signal my Firefox browser--takes several clicks and over 6 or 7 minutes to emerge!
Thank you for your attention.
marlem388

Hi again, cor-el--
Many thanks for your help and diligence.
...I went through your advised operations, made sure I didn't delete my Personal Profile, and so on.
--Did not have a hard time uninstalling Firefox, and after I got rid of the downloaded file,
I continued re-installing Ff.
So all you suggested was fine and effective,
'''BUT''' I still get this weird message under Services in Administrative Tools:
'''Windows could not start the Firefox Service on Local Computer; Error 3: the system cannot find the path selected'''
--All the same, despite Local Computer's stubbornness , Firefox does emerge sooner than before, and I have you to thank for it.
Some day I will learn why Error 3 keeps being blind to Ff's path!
marlem388

Windows could not start the distributed transaction coordinator service on local computer

Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
Melvin

Hi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read    ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
        \Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang

Windows could not start the Network Location Awareness service on Local computer

i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
haus

Hi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support

Windows could not start the DHCP Client service on Local Computer, Error 2

Hi everyone,
I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
service on Local Computer." "Error 2: The system cannot find the file specified.".
There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
"sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
"NET LOCALGROUP administrators "NT Authority\Local Service" /add"
"netsh winsock reset catalog"
I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.

Hi,
Did you mean after the restart the sfc /scannow command still could find the corrupted files?
Have you check this these related registry entries permission for your account?
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
permission needed: Full Control, Read
for more information, read this article:
Some services do not start in Windows Vista and Windows 7
https://support.microsoft.com/kb/943996?wa=wsignin1.0
If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
Karen Hu
TechNet Community Support

Could not start the TNSListener service on Local Computer

I installed Oracle 10g rel 2 under Windows 2000. The computer is DHCP, so I installed the MS loop adapter, and am able to successfully the new IP address.
SQL*Plus returns this error:
ORA-12541: TNS:no listener
When I try to start the listener via control panel > services, I get this Microsoft Management Console error:
Could not start the OracleOraDb10g_home1TNSListener service on Local Computer. The service did not return an error. This could be an internal Windows error or an internal service error. If the problem persists, contact your system administrator.
My full computer name (via control panel) is dimension4100.ora.newmiddleclass.com and it is a member of workgroup WORKGROUP.
C:\WINNT\system32\drivers\etc\hosts contains (I added the 2nd line):
127.0.0.1 localhost
192.168.255.255 dimension4100.ora.newmiddleclass.com dimension4100
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = ora.newmiddleclass.com)(PORT = 1521))
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ora.newmiddleclass.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM.ora.newmiddleclass.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
My SID is HCM.
Can someone please suggest a solution? Thanks.

That helped somewhat... now I am able to start the listener. However, SQP*Plus now says:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor.
My tnsnames.ora now looks like this:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dimension4100.ora.newmiddleclass.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM.dimension4100.ora.newmiddleclass.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I'm using dimension4100 for the SQL*Plus Host String in the login window.

When I open Itunes it says,Windows could not start the bonjour service on local computer.

Just recently, I had a problem with the AVFoundation thing on my computer. Well I got that fixed, but now it has a message coming up that says " Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
Please tell me how to fix it.

Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
That's an unfamiliar one, steve.
Let's see what happens if we try to start the service manually.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications"
Open "Services". (Perhaps maximise the Window to better see what's going on.)
Select the Bonjour Service and click "Start".
Do you get an error message then? If so, what does that one say?

OracleConcMgrVIS_baba service on local computer started and stoped

Similar Messages

Maybe you are looking for