Oracledbconsoleorcl service is not running ?

i installed oracle database and developer suite 10g and the service mentioned was working properly at the first time , but when i restarted the computer it did not work , and when i try to start it , this message appears
windows couldn't start the oracledbconsoleorcl service on local computer . for more information review the system event log . if this is a non-microsoft service , contact the service vendor , and refer to service-specific error code 2 .
what should i do ?
thanks in advance

You probably got your IP via a DHCP and it changed after you rebootet your system?
also look what a little google search brought up:
Console service won't start -help
you probably need to install a loopback adapter and recreate the EM repository:
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABBDGBI
by the way this isn't forms related at all, so you might ask your question in the database general forum after you tried what I suggested you.
cheers

Similar Messages

SBO_Backup Service is not Running In SAP Business one 8.8

Hi Experts,
Here We have Recently Upgraded from SAP Business one 2007 to SAP Business one 8.8.
Previously the SBO_Backup service In Server Tools was running proberly,
But after Upgrade the Backup service is not running .
Kindly Give us your value solutions..
Regards,
M.Senthilnathan

Hi,
I Am Using Windows Server 2003 Small business Server edition.
I have checked Ur solutions.
Am running Server tools in Administrator Login only with Full Permissions.
The License manager and DI server is running Only The SBO_Backup service is not Running!!!
Regards,
M.Senthilnathan

OSB sbconsole "Test Console" service is not running

Hi all,
A problem in the osb domain sbconsole I am facing during testing of proxy/business services. When clicking on the "Launch Test Console" icon I got following error:
Error Accessing Test Configuration
"Test Console" service is not running. Contact administrator to start this service.
I have checked the test-console flag as true in ALSBdebug.xml file in all admin and managed servers. Still I am not able to test the service through sbconsole. All the servers are in OK state
Please help.
regards
Mohit Sharma

Cluster address should be comma-separated address of managed servers. For e.g. - If managed_server1 is listening on host:8011 and managed_server2 is listening on host:8013 then cluster address should be like host:8011,host:8013
You may refer section "Cluster Address" at below link -
http://download.oracle.com/docs/cd/E17904_01/web.1111/e13709/setup.htm#i717132
Regards,
Anuj

Report Subscription by email error - The SQL Agent service is not running

Hello All,
This may be an easy answer, so please excuse my ignorance if I am overlooking something simple. I a simply trying to setup Report Subscriptions to be emailed to me. We currently have essentially 3 servers in use in our environment - a CAS, a Site server
and a SQL 2012.
I have configured the email settings in Reporting Services Configuration Manager on the Site server and was finally able to see the email option in the Create Subscription Wizard, but it errors out with:
System.Web.Services.Protocols.SoapException: The SQL Agent service is not running. This operation requires the SQL Agent service. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SchedulerNotRespondingException: The SQL Agent service is not running.
This operation requires the SQL Agent service. at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateSubscription(String Report, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String
Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters, Guid batchId, String& SubscriptionID) at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateSubscription(String Report, ExtensionSettings
ExtensionSettings, String Description, String EventType, String MatchData, ParameterValue[] Parameters, String& SubscriptionID)
We do not have SQL installed locally, therefore it makes sense that the Agent service is not running. How do I subscribe to alerts in SCCM without a local installation of SQL?
-Brad

I am positive - see screenshots below of services on the SQL server:
Yes, reports work perfectly otherwise... Just cannot subscribe.
-Brad

The report server service is not running on Reporting Service Point server

Hi,
I have encountered a problem, my reporting service point has stopped working. (SCCM 2012 R2)
In srsrp.log:
Check state SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Check server health. SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Successfully created srsserver SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Reporting Services URL from Registry [https://s-hub-sql1.domain.local/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
The request failed with HTTP status 404: Not Found.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Failures reported during periodic health check by the SRS Server S-HUB-SQL1.domain.local.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
Registry change SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Timed Out... SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
Set configuration SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
In windows event log:
On 12/15/2014 6:39:28 PM, component SMS_SRS_REPORTING_POINT on computer S-HUB-SQL1 reported: The report server service is not running on Reporting Service Point server "S-HUB-SQL1"; start the service to enable reporting.
In configuration manager service manager, the service sms_srs_reporting_point is running.
In Reporting services configuration manager, the service is running.
If I restart the reporting service, it doesn't helps.
What is not properly?

I've already found the reason why all stopped working - someone deleted the report manager URL HTTPS bindings (in Report services configuration manager). Added it back, than reporting started to work. Awww!

Agent and TNSListener service can not run when system starting

The Agent and TNSListener services can not run automaticaly when system startes.If run Agent service by hand in control panel,system prompt 3221356559 error message.If run TNSListener service in control panel,system prompt none.But after refresh,TNSListener service is not running.How can i do next?Thanks very much!

geno.nullfree wrote:
I'm not sure but since it's saying there's a library issue, you could try running:
# ldconfig
Failing that you could try a:
# pacman -Rns slim
# pacman -Syu slim
I tried both "ldconfig" and "pacman -XXX", but the problem is still there.
Maybe I need use another way to recompile slim in my machine.
But I have no time to test it now, I will try it another day.
Thx for replies.

Alert: [LYNC] 'Lync Server Web Conferencing' NT Service is not running.

We keep getting this below Alert and everytime this happens, Conferencing would disconnect and connect back again. Current setup as below. We are on latest CU November 2014.
Server 2013 Pools - 2 pools
Each Pool has 5 front end servers with 2 back end servers mirrored.
Unable to find anything from best analyser, Ports have been validated. Any idea how to resolve this ?
Alert: [LYNC] 'Lync Server Web Conferencing' NT Service is not running.
Source: LS Data Conferencing Component [FE Server]
Path: FE Server
Last modified by: System
Last modified time: 11/24/2014 9:41:23 AM Alert description: 'Lync Server Web Conferencing (RTCDATAMCU)' NT Service is not running. To restart the service, run 'net start RTCDATAMCU' from a command-line window.
Whenever above alert is triggered, there is a corresponding application alert as below.
.Net runtime
Application: DataMCUSvc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an internal error in the .NET Runtime at IP 00007FFAC2A91020 (00007FFAC2A90000) with exit code 80131506.
Application Error
Faulting application name: DataMCUSvc.exe, version: 5.0.8308.0, time stamp: 0x5050e3de
Faulting module name: clr.dll, version: 4.0.30319.34014, time stamp: 0x52e0b86c
Exception code: 0xc0000005
Fault offset: 0x0000000000001020
Faulting process id: 0x303c
Faulting application start time: 0x01d00621fefd0760
Faulting application path: C:\Program Files\Microsoft Lync Server 2013\Web Conferencing\DataMCUSvc.exe
Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
Report Id: ca360fe4-73e7-11e4-80ca-001b21bfd144
Faulting package full name:
Faulting package-relative application ID:

Hi,
Did the issue also happen before updating to the latest CU?
Please make sure you have installed the latest service pack for the Microsoft .NET Framework
Please try to change part of Lync service to start as “Automatic (Delayed Start)”, restart FE Servers and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

The audio service is not running

Yeah as the title says..my audio isn't working it tells me "The audio service is not running"..in my headphones no sound even on my speakers..What will I do? I went to the service button and when I did start to windows audio it told me "Windows
could not start the windows audio service on local computer Error 1068:The dependency service or group failed to start.

Hi,
Find the related services and start them:
1. Click Start, type Services.msc in the Start Search box.
2. Scroll down the list of services, right-click Windows Audio
and select Start.
3. Select Properties for Windows Audio and set its Startup Type
to Automatic.
If the Windows Audio service does not start and you still get the error
Error 1068: The dependency service or group failed to start, then make sure that the following services are started and their
Startup Type is set to Automatic.
•Plug and Play
•Multimedia Class Scheduler
•Windows Audio Endpoint Builder
Karen Hu
TechNet Community Support

OS XP Operation could not be completed. "The print spooler service is not running what to do?

I've used this printer since 2009 no problems. Added MS Office Home/Student 2010 and added Publisher 2010. When I try to add printer I get this message: "Operation could not be completed. The print spooler service is not running. In trouble shooting with "?" get an error Server error 403.
I've uninstalled and installed the last 2 days, over 16 hours. I'm on an Acer Netbook (10" screen). What do I do to fix this. I even tried System Restore and still does not work.

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

The index management service is not running

Im in the process of creating a web repository with the following version history
Version History
6.0.2.4.3_ContentManagement_Collaboration
6.0.2.3.5.Enterprise_Portal_Service_Pack_2
If finished creating the crawler profile, cache, website, sytem,repository.
when i go to index admin i get the error 'The index management service is not running '
tried restarting the servlet engine, the trex server -the error still persists.
is there any tool/note for correcting this.
any help apreciated
prasad badal

Hello Karsten,
thank You for your reply.
We have a lot of entries in our knowledgement.log files as the following:
#1.5#C000AC17158E0004000004AB005FCB470003E52BC02E9648#1096401000765#com.sapportals.wcm.service.indexmanagement.TaskQueueReaderTask#irj#com.sapportals.wcm.service.indexmanagement.TaskQueueReaderTask#System#0#####com.sapportals.wcm.scheduler##0#0#Error##Plain###null - java.lang.NullPointerException
     at com.sapportals.wcm.service.indexmanagement.TaskQueueReaderTask.run(TaskQueueReaderTask.java:33)
     at com.sapportals.wcm.service.scheduler.wcm.SchedulerEntry.run(SchedulerEntry.java:332)
     at com.sapportals.wcm.service.scheduler.wcm.Scheduler.run(Scheduler.java:367)
     at com.sapportals.wcm.util.factories.ThreadUtils$InternalFixedTimer.run(ThreadUtils.java:91)
     at java.lang.Thread.run(Thread.java:479)
Do you know what to do?
Thanks a lot

Window update will not run... error "windows cannot currently check for updates because the service in not running?"

i am running windows 7 64bit professional on an asus essentio series cm5675 i5 processor with 16gigs of ram
any reason or what is causes the update program/service to not run?

Hi, here is the report generated by the Farbar Service Scanner:
Farbar Service Scanner Version: 31-05-2013 01
Ran by Owner (administrator) on 02-06-2013 at 13:50:39
Running from "C:\Users\Owner\Desktop"
Windows 7 Home Premium Service Pack 1 (X64)
Boot Mode: Normal
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo IP is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
Firewall Disabled Policy:
==================
System Restore:
============
System Restore Disabled Policy:
========================
Action Center:
============
Action Center Notification Icon =====> Unable to open HKLM\...\ShellServiceObjects\{F56F6FDD-AA9D-4618-A949-C1B91AF43B1A} key. The key does not exist.
Windows Update:
============
BITS Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Windows Autoupdate Disabled Policy:
============================
Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Windows Defender Disabled Policy:
==========================
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender]
"DisableAntiSpyware"=DWORD:1
Other Services:
==============
Checking Start type of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ImagePath of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ServiceDll of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
File Check:
========
C:\Windows\System32\nsisvc.dll => MD5 is legit
C:\Windows\System32\drivers\nsiproxy.sys => MD5 is legit
C:\Windows\System32\dhcpcore.dll => MD5 is legit
C:\Windows\System32\drivers\afd.sys => MD5 is legit
C:\Windows\System32\drivers\tdx.sys => MD5 is legit
C:\Windows\System32\Drivers\tcpip.sys => MD5 is legit
C:\Windows\System32\dnsrslvr.dll => MD5 is legit
C:\Windows\System32\mpssvc.dll => MD5 is legit
C:\Windows\System32\bfe.dll => MD5 is legit
C:\Windows\System32\drivers\mpsdrv.sys => MD5 is legit
C:\Windows\System32\SDRSVC.dll => MD5 is legit
C:\Windows\System32\vssvc.exe => MD5 is legit
C:\Windows\System32\wscsvc.dll => MD5 is legit
C:\Windows\System32\wbem\WMIsvc.dll => MD5 is legit
C:\Windows\System32\wuaueng.dll => MD5 is legit
C:\Windows\System32\qmgr.dll => MD5 is legit
C:\Windows\System32\es.dll => MD5 is legit
C:\Windows\System32\cryptsvc.dll => MD5 is legit
C:\Program Files\Windows Defender\MpSvc.dll => MD5 is legit
C:\Windows\System32\ipnathlp.dll => MD5 is legit
C:\Windows\System32\iphlpsvc.dll => MD5 is legit
C:\Windows\System32\svchost.exe => MD5 is legit
C:\Windows\System32\rpcss.dll => MD5 is legit
**** End of log ****

System error 3 OracleDBConsoleorcl service could not be started.

Hallo!I installed Oracle 10g on my Windows XP while connected to my modem that accesses the internet via DHCP.
I installed the Microsoft Loopback Adapter to force my OEM and isqlplus to use the static IP 10.0.0.1.
When I try to launch my OEM via http://joey-xp:1158/em (hostname joey-xp resolves to 10.0.0.1),I am unable to launch OEM.
From the cmd prompt,I type emctl start dbconsole.
C:\Documents and Settings\JOEY>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://127.0.0.1:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleorcl service is starting.
The OracleDBConsoleorcl service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.
I don’t understand why the default loopback (127.0.0.1) is being used.
How do I solve this?
Thanks.

Thanks zekeriya but unfortunately using
emca -dbconfig dbcontrol db
does not help.
The system error 3 still appears.
Thanks.

Problem found: The Diagnostics Policy Service is not running

Whenever I attempt to run network diagnostics Windows 7 Ultimate response with Problem
found: The Diagnostics Policy Service is not running. <o:p></o:p>
I usually find my own solution to the network problem. However, not to the inability to run
diagnostics. In addition, in my attempt to find a solution, the Diagnostic
Policy Service Properties has become corrupted. The run under this account information
is not valid.
So I basically need the account and password for the service. In addition, once I have that info properly
inserted, I need a way to get the diagnostics to actually run.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

SW Update: Start Time: Not available - Service is not running

Server Admin reports the "Software Update Service is: Running" in the Overview window. The clients are being updated from the Software Update server. The Server Admin tool also reports "Start Time: Not available - Service is not running". The Server Admin tool also reports "Last Check: Not available" from the "Settings/Updates" window. However, all new updates are available. Diskutil has verified permissions too. What needs to be done to correct the reporting?

Hi Jeff, if you try typing 'sudo serveradmin fullstatus swupdate' in the terminal what do you get?
If it still says stoppped then try typing 'swupdctl start'
I sometimes need to start it from the command line.
Let us know how you get on.
Cheers

Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
I would appreciate any help...
Thank you

This worked for me. GP
Problem : error 1075 and Local print spooler service is not running.
problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista. HP came up with simple solution below. The regedit part is what fixed mine. I did not need the safe mode part. I think Lexmark should add the solution to your knowledge base.
==============================
From HP: Please perform the below given steps in safe mode to resolve the issue.
Reboot your notebook and press F8. The system will show some booting options select safe mode.
Note: Starting computer in safe mode may take some time.
Uninstall the printer using Programs and Features from the control panel of your notebook.
Uninstalling any software from Control Panel :
1. Click on Vista (start) button
2. Click on control panel
3. Double click on Programs and Features
4. Click on YOUR Lexmark Printer and click on remove.
Download and reinstall the printer software using the below given link :
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
NOTE: Clicking the link may give an error indicating it is invalid.
Copy and paste the entire link in a new browser window.
After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
Click on Vista (Start) button, and type Regedit.exe in search bar
Navigate to the following branch
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
In the right-pane, double-click the DependOnService value
Delete the existing data, and then type RPCSS
Close Regedit.exe
Restart the computer.
This should resolve the issue.
For information on keeping your HP and Compaq products up and running, please visit our Web site at:
http://www.hp.com/go/totalcare

Oracledbconsoleorcl service is not running ?

Similar Messages

Maybe you are looking for