OracleDI Installation and Java issues
I am brand new to ODI and just downloaded and installed it yesterday onto a test machine. I have not yet created my DB schemas yet I am waiting for the DBA to create a Test Environment for me to do so in. That being said, when i try to run the Examples that came with the Oracle Data Integrator the OracleDI Demo Repository, Source Data Server and Target Data Server all start up in cmd windows and on all three cmd windows is a statement: "A JDK is required to execute Web Services with OracleDI. You are currently using a JRE"
My system is Windows XP Pro based, I downloaded and installed both j2sdk-1_4_2_17-windows-i586-p.exe and jdk-1_5_0_15-windows-i586-p.exe, but i still receive the same warning on the cmd windows.
Any ideas on how i can switch to the JDK instead of using the JRE? Or any ideas on how to stop this warning from showing up?
Thank you in advance for all the comments and suggestions.
Tom Cusick
ODI uses ODI_JAVA_HOME environment variable to find java.exe
if ODI_JAVA_HOME is not defined it uses JAVA_HOME
For standard features a JRE 1.5 is enough however for Data Service generation ODI needs a JDK 1.5 .
Please be sure the path in ODI_JAVA_HOME is really a JDK
To find out what you are running from a default JVM ( to see if you have a JDK already installed ), type java - version on a command prompt ( what your JAVA_HOME is ).
Find out what your ODI_JAVA_HOME is set to presently ( likely JRE 1.4.2 ). Set it to a JDK 1.5 ( you will need to download a JDK 1.5 for your platform ( not sure which OS you are running ) if you don't already have one ).
David Hecksel
Similar Messages
-
I'm trying to use Microsoft Livemeeting 2007 - browser and java issues
My browser and java versions are apparently too new, and I can't seem to figure out how to download and use past versions to properly use the Livemeeting software. I know Livemeeting is outdated software, but this is what the client I'm working with is using, and I need to be able to join web conferences for document viewing/sharing, etc. Any help would be most appreciated, as I've spent hours trying to figure this out, but nothing seems to be working.
Maybe try this??
Microsoft Livemeeting 2007 not working
Otherwise you may want to try posting on the Microsoft Mac forums: http://answers.microsoft.com/en-us/mac -
I have a serious issue with my Lion installation. In the process of upgrading from Snow Leopard through 10.7 to 10.7.1 to 10.7.2 somewhere in there, Java got badly broken. I tried re-downloading Java for Lion and reinstalling but it gives me an idiot message that my OS version is not compatible. ***?
So I open the package with Pacifist and do an install to default location from the top of the package and all the Java stuff works again. But then within about three days I can no longer open DMG files. I double click them and nothing happens. Disk utility won't launch. If I reinstall the 10.7. combo update, Disk Utility works and DMG files open but if I try to connect to a streaming Java service such as used by Go To Webinar, I never get anywhere. So I am at the point where I can either work with DMG files OR I can use Go To Webinar but not both.
This is idiotic to me, but I cannot even begin to figure out why Java gets broken by applying an update and why my ability to work with DMG files keeps going away and if the two are actually related or there is just some weird timing juxtaposition.
Anyone who has seen this problem and figured out a solution, please wade in.
Thanks!
RossJadedEye wrote:
If I reinstall the 10.7. combo update, Disk Utility works and DMG files open but if I try to connect to a streaming Java service such as used by Go To Webinar, I never get anywhere.
Well, the issue doesn't seem to be in your User since the Combo Update doesn't touch anything in your User Account. This being the case and assuming you have a backup of your account on another disk, I'd do a clean install of Lion. Then in Setup Assistant migrate over all your stuff. -
I recently upgraded from Crystal 11.5 to Crystal 2008. Since then I have been battling a host of problems trying to make this work. This is the latest.
I had a problem running some older reports in a web application. I was getting the Login Failed error, which can mean about anything. So I was going to upgrade the report definition to the new Crystal 2008 format. Since I installed Crystal 2008, I have been having an issue with the report designer. The disoplay would not refresh the background. Whatever was on the screen when you opened the designer was in teh background and if you opened a dialog while in the designer, it remained on the screen even though the function completed successfully. This confusing display made the designer impossible to work with.
So I decided to reinstall Crystal 2008 to see if there was something wrong in the setup. I opend control panel and uninstalled all the crystal 2008 components, which included Crystal 2008 SP2, Crystal 2008 SP3 and one other component. All the uninstalls ran successfully. I still have Crystal Reports XI release 2 installed.
I tried to run the install for Crystal. The install runs fine until it comes to the section to register the dll's. Then it fails. Below is the first message that I get. After that I get the same message for every module to be registered.
Error 1904. Module C: u2018program Files\BusinessObjects\BusinessQbjects Enterprise 12.0\win32_x86\ReportConvTool .dll failed to register.
HRESULT -2147024770. Contact your support personnel.
I have every version of the .Net framework on this machine and they are all up to the most current level. I have Visual Studio 2005 and Visual Studio 2008 on this machine as well. I am an administrator, and I do not have permission issues.
I am getting very weary of dealing with Crystal Reports technical problems. Nothing should be this difficult to make it work out of the box. Can someone help me.Hello,
PLEASE don't post the same question in multiple forums.
Install SP3 and test again and then search this for forum as well as Microsoft's site for the 1904 error. It's an MSIExec error code. Typically it's missing Windows dependencies or your PC needs to upgrade the MS Installer program.
Usually when dll's fail to register is because the OS is missing windows dependencies and likely the C++ runtime package.
Thank you
Don -
Adobe Creative Suite 5.5 Master Collection Installation and support Issue
My windows 7 operating system became corrupted and I needed to do a fresh installation of both the operating system and the the creative suite.
After installing both the operating system and the creative suite I received an error saying that the program has not installed correctly and to contact support.
I contacted support and I was told support wouldn't help me correct the problem and to ask the forum on how to fix this issue.
Any help on how to resolve this issue would be great!
The files that didn't install correctly were:
WARNING: DW031: Payload:{61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) 6.0.0.0 has been updated and has been selected for repair. The patch {32841ECE-EC28-42CD-A4DD-6CE832A7EA8D} Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) 6.0.0.0 has been updated and has been selected for repair. The patch {32841ECE-EC28-42CD-A4DD-6CE832A7EA8D} Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.FE9047P-1019rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Master Collection CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\REDDWA~1\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\REDDWA~1\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {11C0657F-2BD4-4CBC-87F3-9455DC91886E} Recommended Common Fonts Installation x64 1.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\RosewoodStd-Regular.otf'(Seq 60)
ERROR: DF012: Unable to find file(Seq 60)
ERROR: Error code: 2(Seq 60)
----------- Payload: {47CE893F-A0FF-4094-AA16-5209AEA7C7E0} Firefox Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeContribute6.1-FFPlugin\OEM(Seq 32)
----------- Payload: {208DE3D5-541C-41B0-8595-7A608A6E4306} IE Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeContribute6.1-IEPlugin\OEM(Seq 26)
----------- Payload: {4A4F91EA-5951-4C5C-B911-027D802817EB} Office Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeContribute6.1-OfficePlugin\OEM(Seq 34)
----------- Payload: {DD309051-FACF-4A5E-87F1-C57154BB3DE8} Adobe Contribute CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeContribute6.1-mul\OEM(Seq 8283)
----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp6552922255" Error 5 Access is denied.(Seq 74)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 74)
----------- Payload: {1C9D6B02-8B92-4E40-8B22-37D8C95430F0} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_USLanguagePack\OEM(Seq 74)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failedPartrick Gray it from the error message you have posted there appears to be a problem with the Windows Installer Service. Please see Error "1721 [or 1722]: There is a problem with this...package" when installing | CS4 | Windows for additional details.
-
Installation and compatibility issues with photoshop CS4 - Win 8
I recently purchased a new computer with Windows 8. I am experiencing issues when attempting to install the downloaded and upgrade copy of photoshop CS4. Initially unpacking the software presented issues, but I believe they've been resolved - specifically I had to change the folder attribute from read only while unpacking, of course the tedium arose when this endeavor didn't seem to apply the new attributes to all subfolders and files. I percivered though by repeating it for each folder throughout. When I select the icon for the setup.exe file though the process ends as quickly as it began. I considered that it my have been seeking the previous version (in my case photoshop elements) so I sought to install it first, but as you may have guessed the old software is experiencing it's own compatibility issues. Does anyone know if photoshop CS4 will even work in Windows 8, and I hope someone will have already cleared this hurdle and can give me direction - please, I really am hoping for a life preserver here!
Thankyou, Chris
PS I did attempt to open one of the attached adobe reader files that came with the downloaded copy, but unfortunately they won't open prior to installation given they show the file size 0kb. I don't know if these files are simply acting as place holders for the cab files - or whether there remains an issue while unpacking the files to begin with.If the executable doesn't even run, it's either being shut down by some security stuff on your system or can't find a component. Impossible to tell. whiel there may be compatibility issues, on a more general level CS4 should run on Win 8...
Mylenium -
Linux installation and display issues
PROBLEM:
During installation, the following error occurs:
No Java virtual machine could be found from your PATH
environment variable. You must install a VM prior to
running this program.
RESOLUTION:
Install Java 1.5 and make sure that it's in your PATH environment. To
doublecheck that Java 1.5, simply
type 'java -version'.
PROBLEM:
When opening any display view, the following error occurs and nothing shows
up:
ERROR GuardianApplication [main] : Registry does not exist, creating
default registry
Unhandled event loop exception
Reason:
No more handles (java.lang.UnsatisfiedLinkError:
/<GUARDIAN_INSTALL_DIR>/configuration/
org.eclipse.osgi/bundles/72/1/.cp/libswt-mozilla-gtk-3139.so: libstdc++.so.5:
cannot open shared
object file: No such file or directory)
RESOLUTION:
Add your browser's library dependencies by editing the /etc/ld.so.conf and
add /<PATH>/firefox or /
<PATH>/mozilla directory.
Example: /usr/lib/firefox-1.5.0.7
Make sure that the path to firefox or mozilla contains the
/usr/lib/firefox-1.5.0.7/libxpcom.so. After
that, run ldconfig command to update your library.
Install compat-libstdc++-33 library. For Fedora users, simply type: "yum
install compat-libstdc+
+-33.i386" as root. Relaunch Guardian.I am really interested on comments. Anyway check also those sites about Linux on Toshiba notebooks:
http://linux.toshiba-dme.co.jp/linux/index.htm
http://newsletter.toshiba-tro.de/main/index.html -
Two independent installation and performance issue
Hi,
We have installed two independent DBs (11gr2 enterprise 64 bit)on a large box with 80 cores 256GB RAM.
The data files for both DBs are on ram. The objective is to find if we can double perf number with two instances.
What we see is that when both instances are run the "log file sync" event takes 5 times more time (there are other wait events also go up).
db2: (when db2 running alone)
log file sync 202,445 21 0 .9 Commit
db2: (when db1 & db2 running together)
log file sync 267,512 97 0 4.5 Commit
The CPU load average -1 comes down from
14.1 to 1.68 though CPU utilization jumps from 41% to 82%.
There are two independent installations. We are trying to find out how one instance of DB can affect other (make other wait more), unless there is an underlying issue in the common resource used by both.
The SGAs should be allocated and accessed by DBs separately, right?
ipcs -m shows:
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0xe93e5adc 262144 oracle 660 4096 0
0x13074fa0 491521 oracle 660 1612709888 0
0xcd05b8c4 622594 oracle 660 4096 0
if we turn off one db then
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x13074fa0 491521 oracle 660 1612709888 0
0xcd05b8c4 622594 oracle 660 4096 0
I am not very familiar oracle and do not know how to find memory layout of oracle DB. Any help/pointer is appreciated.
What is the best way to find out that two DBs do not share the same SGA/resources?
The two DBS have everything different except ora inventory.
Kallol Biswas
[email protected]
NucleoDyne Systems, Inc.Without a lot more information there really isn't much one can say other than that, properly installed, the two should be completely independent of each other.
That said it seems that is not the case which takes us back to what none of us out here can know ... what isn't as you assume it should be.
What is most confusing to me is this statement:
The data files for both DBs are on ram. The objective is to find if we can double perf number with two instances.I have no idea what either sentence is intended to mean. The first because datafiles are not "on RAM" and the second because two instances will never double anything other than resource utilization and overhead. -
Faulty Installation and Unique Issues
First of all, I'll tell you I'm in the middle of Nowhere, China and no one here knows what Apple, Mac, or FireWire means in Chinese or English. It's just not known here.
My MacBook suffered a loss of power today during an upgrade to Leopard that I had been putting off. Now I can start from the Installation Disc, but if I select "Macintosh HD" at startup, I eventually get delivered to a grey screen that goes nowhere. Starting from the disc to try to reinstall presents the problem of not enough storage space now that the faulty install has eaten up a good 7 or so GB. I tell you I'm in China because I can't find a FireWire here to use in Target Disk Mode and the government has issued a halt on the mailing of any electronic equipment until November 1, 2008, because of the Olympics. Now I have a brick instead of a MacBook that I'm not willing to clean install because it's LOADED with irreplaceable data that I can't transfer (to my knowledge, which is where you come in) at this point. I still have the option to run utilities when the installation disk is in, but am not experienced enough to know without your help how to make a backup to any kind of external disk from there. Also, if there's a way to just reverse what changes were made in the faulty installation from 10.4.11 to 10.5.1, I'd be more than happy to hear those or any other solutions you have to offer. Thanks a million!!If you can boot with the install disks and can hook up an external HD, then use Disk Utility to create an image of the hosed internal HD (result of interrupted installation) onto the ext HD. Then, wipe and reinstall Leopard (since I'm assuming that you failed to make a bootable backup of your Tiger installation), boot into the installation, mount the disk image, and try to use the Migration Assistant to transfer user and network settings.
-
Hi, i am using a brand new MBP with Leopard. I play a java based game called Runescape in one window, and in another window i have their (also java) forum opened. When i try to switch windows, by ex. clicking on a link in forum window, there is some flashing of both windows appearing (like one is highlighted and than another), and i have to click more than 2 or 3 times before the desired window is selected. I have no such problems on my PowerBook G4 with tiger and latest Safari on it. Any ideas?
The newly discovered zero-day flaw in Java 7 is so serious that the U.S. Department of Homeland Security has warned users to disable or uninstall it, and Apple has disabled the Java 7 plugin on Macs through its OS X anti-malware system, in order to protect users from a potentially serious security issue.
-
CS5 Installation and Update issues
I am trying to re-install Photoshop CS5 onto my Win 7 Ultimate System. I know from previously installing it several years ago that there was an issue with installing it with Adobe Raeder on a system. Something to do with folder location issues. I have tried re-installing CS5 and it does install (apparently Reader issue solved(?)). Both 32bit and 64bit seem to install ok. I can open Photoshop and access the program.
Problem: When I try to do updates for the software, that are available, they download and then hang on install. The Adobe installer stops responding and nothing installs.
Could someone pleas assist me with this issue.
Thank You
System Information:
Win 7 Ultimate 64 bit, Service pack 1 and updates installed.
8 Gigs of system memory
1 Terabyte main drive - Photoshop location.
75 GB partion on seperate drive for Photoshop Cahe.
Nvidia GTX460 with 1GB memory
332.21 Nvidia WHQL driverhttp://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
Have you tried manually updating? -
Oracle SQL Developer installation and Java
I finished installing Oracle Client without problems. Opened up SQL Developer for the first time and he asks me for the full Java.exe pathname.
That's fine, but when I input the java.exe I just get asked again, no errors. Repeat until infinity.
I installed the newest Java SDK and tried both 32-bit and 64-bit versions (jdk 7u4). I even tried installing Oracle Client version 11.1.0 AND 11.2.0 to see if that make any difference, but it's all the same.
I have uploaded a screenshot if that helps: http://i50.tinypic.com/mjtqte.jpg
Any ideas?
Regards,
Gunnar ÓskarssonHi Gunnar.
Documentation:
http://docs.oracle.com/cd/E25259_01/doc.31/e26419/install.htm#sthref8
Ideas:
-Do not use java7
-Use JDK not JRE
-On widows there is a version of SQLDeveloper including java 6 jdk
-Instant client is not required - but if you want to use it use at least 11.2.0.2
-Updated SetJavaHome in sqldeveloper\sqldeveloper\bin\sqldeveloper.conf to point to the JDK
-There is some confusion over 32bit and 64bit Operating System, java and SQLDeveloper, you can search the forum for details, eg: thread title: "Unable to start Oracle SQL Developer"
-Turloch
SQLDeveloper Forum -
CRYSTAL Reports 2010 for VS 2010 Installation and Deployment issues
On Installing Crystal Reports for Visual Studio 2010 the Crystal Report Viewer in the Toolbox reports itself as Version 13.0.2000.0. When dragging said viewer onto an ASPX Page it: -
1) Comes up with the wrong version: - Assembly="CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304", NOT 13.0.2000.0!
2) The ADE visualisation of the ASPX Page comes up with the following error: - "Error Creating Control - ContentPlaceHolder1. SessionState can only be used when enableSessionState is set to true. ...............
In my Web.Config file enableSessionState is set to true AND System.Web,SessionStateModule is referenced in <httpModules> the message is therefore less than helpful.
3) Surprisingly when I correct the Version to 13.0.2000.0, the same error happens. Even more surprisingly the page builds and in the development environment the CrystalReportViewer works@#@!! Unfortunately when deployed to a production Web Serrver W2K8 x64 and IIS7.x the page loads but the viewer does not, no errors are caught, the event viewer log is happy. (The click-once Runtimes x32 and x64 have been installed on the server).
The same code works fine in VS2008 targetting CR 2008.
How do I:
1) Get CR2010 for VS2101 Installed Correctly?
2) Deploy The Viewer to a production server?This is a known issue (unfortunately, no KB created yet as I just duplicated and reported the issue to QA (tracking number; ADAPT01506220) two days ago).
The issue appears only on computers with side by side install of .NET 2008 and .NET 2010.
Follow these steps to resolve the issue:
1) Remove the following from the web.config:
<add assembly="CrystalDecisions.Shared, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
2) Open the form that has the viewer on it, go to code behind and replace this:
<%@ Register assembly="CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web"; tagprefix="CR" %>
with:
<%@ Register assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web"; tagprefix="CR" %>
3) Go to the Properties of the project, select references and remove crystaldecisions.web of version 10.5.3700
4) In the Properties, click the Add button and then the .NET tab and select crystaldecisions.web version 13.0.2000.0
5) Recompile.
Distribute the CRVS2010 runtime.
MSM:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0.zip
32 bit MSI:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0.zip
64 bit MSI:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0.zip
BTW. the same issue exists with WIN apps. The fix here is much easier; Remove all CR 10.5.3700 references from the project and add references to 13.0.2000 assemblies. (tracking number; ADAPT01506310).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Tiger/OS9.2 installation and Booting issues among multiple HD's
G4 PCI, (thats bootable in 9, must be booted in 9 to use an essential business app). It has 2 HD's: an 80 G ata for OS9 & apps, & OSX (from Jag - Tiger, w/minimal apps&files. I later added a SATA 320G driven by a SIIG, pci card. The 320G became the main Tiger,X Apps & files HD, the smaller one for OS9 only, & Tiger emergency boot. The 80G died, but I was able to clone everything on it to a 10G ATA, that was then installed in the G4 so I could run the business app.
I also cloned the dying ATA HD to an empty 114G partition on the Large SATA HD. The idea was to transfer the os9 & Business app to a large partition bec it needed normal space. I couldn't get the G4 to boot in 9 from that partition, though it was a clone of the ATA HD??
**1. The OSX "Startup Disk CP" in the Large SATA HD, sees both Tigers and Both 9's in both HD's. I can restart directly into the Small ATA HD's X or 9. It will not boot into its own 9, though the CP sees it, and allows me to choose it. Itwill auto restarts back in its X, after a blank grey screen while it trys to make sense of whatever it sees in the 9 partition. This 9 is a clone of the ATA HD's perfectly working 9.
**2.When happilyrunnibg in the Small ATA's 9, its "Startup Disk CP" only sees its own X & 9, it doesn't see the SATA HD at all....To get back to the Large HD X, I must first reboot into the Small HD's X, then its Startup Disk CP sees the Large SATA's X & 9. I can then reboot into the Large X, but again not into the Large 9 (same deal as above).
**3.I tried to clone the ATA Disk (working 9&X) to a new external USB HD's 100G partition. It took forever. The SATA CP saw both in the Ext HD,but wouldn't boot in either in either. The ATA saw both but wouldn't boot.Scarey, very nasty freeze/crash, that refused to find any ogood OS.I
**Apple-C, with the 9 CD didn't work... grey dead screen, so I couldn't install a new 9 on the SATA, if it could be found?. I had to use the X disk CP to find a working OS. I Don't want to tell you how many hours of crash restarts with & without the Tiger Disk and repairs I went thru.
** How can I install 9 & its apps, to the large SATA partition?**Why didn't the cloned 9 work on the SATA?** Why does the ATA Startup Disk CP, not see the SATA?**Why do both HD's Startup CP see the EXT usb's 9 & X, allow you to choose them, when they are not bootable? Why are they not bootable? Help!Help!Help! Thanks so much. Totally exhausted! I know the easy answer is getting a new 80G ata and cloning the working 10G to that one, but why won't the SATA work???Maybe the drive is using a GUID partition table. Tiger can read and write GUID drives, but PPC Macs can't boot from them. Select the drive (all the way at the left, not the volume indented below it) in Disk Utility, and look at the bottom-right of the window for "Partition Map Scheme". You need "Apple Partition Map" for it to be bootable by a PPC Mac. This is selectable via the "Options" button in Disk Utility's "Partition" tab.
Also, for OS 9 to boot, you have to chose the option to install OS 9 drivers when you initialize the drive. -
EAS Startup issue after OEPM 11 Installation and Configuration
Hi All,
EAS server is not starting up after the successfull installation and configuration of OEPM 11.1.1.2
Provider Services and Shared Services started fine and i was able to login to Shared Services console
During eas startup individually from the startup script i see this catalina.out file with some errors..
By this i understand that there is some problem in selecting the required JRE as i see both JRE and JRE-64 under the
common folder. Anybody has come across this issue while startup of EAS 11.1.1.2
Any help would be accepted...
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
Thanks,Hi,
1. I assume your system is 64 bit.
2. I think you are installing the 64 bit application. In that case you would get both the folders i.e JRE and JRE-64.
3. Seconldy, I would like to set the permissions of the folders to everyone and give full control and test again. ( to do this, right cick ->security ->add 'everyone' -> give him full control and test).
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/
Maybe you are looking for
-
Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is
-
Given a table that looks like this: ALLOC_NUMBER ALLOC_PCT 88888 2.71428571 88888 0 87777 -2.7142857 85555 11.0429273 I want to group by alloc_number and determine if the sum of the alloc_pct in that group is > 0. If so, return a count of all alloc_n
-
i have an ipad air. very , very impressed. my wife has a samsung which is a great little machine, however... apple is not an orange... question- my ipad heats up , like the underside of some laptops , what do you think?
-
....for some reason..when i press the power button...the laptop makes a loud fan kind of noise...eventually the screen will light up and the apple icon will appear...whats weird is that the icon moves down from its original position slighty..its almo
-
Unable to access share unless I use the AFP url
Dear friends, my Imac 27" runs Lion and I have Sys Pref->Sharing with File (and Printer and Scanner) sharing ticked. Under the former I have a Downloads folder with bob (my userid) on Lion in R+W and Everyone with RO. On my rMBP which runs Mountain L