OracleDiscoverer4i service terminated with service-specific error 6.

Hai Friends..
Tried installing 9iAS 1.0.2.1.0 on NT. When I tried to start the Discoverer4i service got this error. When i am running Discover Viewer it is saying that Communication error or ORB internal error.
I wouid appreciate any help.
Cheers
Gopi
null

Navigate to the drive:\%oracle_home%\DISCWB33 directory in a DOS prompt. Type in dis33ws. This executable should run. It will give you output similar to this:
D:\orant\DISCWB33>dis33ws
Setting up the Operation Mode and Application Name
Session name: OracleDiscovererSession
Preference name: OracleDiscovererPreferences
Setting the creator of DCSThreadMonitor
Registering SessionManager
Error binding to Preference Repository
Starting the memory manager
Session Manager destructor called (or some other message)or Wakeup if configured properly
This is normal since we are not passing any parameters to the executable as the batch
files or services would. The point here is to see if the executable responds and runs.
If the executable does not run, then the likely cause is corrupt or missing .dlls.
In this case you would need to reinstall Discoverer.
Example of one particular resolution:
Ran dis33ws and received an ODBC error indicating a .dll problem exists.
Reinstalled Service Pack 6a (SP6a) and Microsoft Data Access Component 2.5
(MDAC). Re-ran dis33ws and received proper resonponse above.
Brought up Discoverer via the portal page with no error.
Christopher

Similar Messages

The Lync Server Front-End service terminated with service-specific error %%-1008124893.

Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
Thanks

Hi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

The Web Management Service service terminated with service-specific error %%-2147483640,

We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now. Just this week the MSDeploy stopped working. The System event log shows this error when attempting to restart the Web Management
Service on the targeted Win200 R2 server:
The Web Management Service service terminated with service-specific error %%-2147483640.
The Application log shows this error at the same exact time the above error occurs.
IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed. Please reference the Win32 error in this event for further information. Exception:System.Runtime.InteropServices.COMException (0x8007007F): The
specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start()
Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
The above error is preceded by this warning:
A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel failure. The data field contains the error number.
Which is preceded by this error:
Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll. The data is the error.
We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection
Is this occurring because the port is blocked or because the Web Management Service is not running? (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.

Hi Nicola,
seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
Note 1043195 - Configuration of the Web service runtime
Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
Kind regards
Heiko

How to resolve error 'The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted'

One of my exchange 2010 servers dpm agent is give the following error when the dpmra service attempts to start.
The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted..
I have tried uninstalling/reinstalling the agent but this does not resolve the issue
Any help would be greatly appreciated.
Thanks
William Hickson

Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

SQL Server VSS Writer terminated with service-specific error 2147549183 (0x8000FFFF)

Hi Team,
SQL VSS Writer service terminated with service-specific error,
find SC query results, please advice wat;s the issue. Kindly note this service running fine for long time and suddenly stopped.
SERVICE_NAME: SQLWriter
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
                                (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN))
WIN32_EXIT_CODE    : 1066 (0x42a)
        SERVICE_EXIT_CODE : -2147418113 (0x8000ffff)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
Regards,
Karthik
Thanks & Regards, Karthikeyan

this is part of a log error for example:
24 Info 2011/09/26 23:00 [Start SQL VSS Comman]
(NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
25 Info 2011/09/26 23:00 [Start SQL VSS Comman] WIN32_EXIT_CODE : 0 (0x0)
26 Info 2011/09/26 23:00 [Start SQL VSS Comman] SERVICE_EXIT_CODE : 0 (0x0)
27 Info 2011/09/26 23:00 [Start SQL VSS Comman] CHECKPOINT : 0x0
28 Info 2011/09/26 23:00 [Start SQL VSS Comman] WAIT_HINT : 0x7d0
29 Info 2011/09/26 23:00 [Start SQL VSS Comman] PID : 15532
30 Info 2011/09/26 23:00 [Start SQL VSS Comman] FLAGS :
31 Info 2011/09/26 23:00 Klaar met uitvoeren post-opdrachten
32 Error 2011/09/26 23:00 The writer vetoed the shadow copy creation process during the
backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
33 Info 2011/09/26 23:00 Verwijderen tijdelijk bestand C:\Users\serveradmin\.temp\
1313680495583
34 Error 2011/09/26 23:00 Backup voltooid met fout(en)
This is what I look for usually from this log:
32 Error 2011/09/26 23:00 The writer vetoed the shadow copy creation process during the
backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
Just post all the log messages if you can.
[Personal Site] [Blog] [Facebook]

Event 7024 The DPMRA service terminated with the following service-specific error:

Hi
I am getting a DPMRA error on an Exchange 2013 Server.
Event 7024, Service Control Manager
The DPMRA service terminated with the following service-specific error:
An attempt was made to access a socket in a way forbidden by its access permissions.
I think I have fixed the issue by uninstalling the DPM Agent and reinstalling it. It now needs a restart (I will do this after hours)
Is there a better way of fixing an issue like this?

Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

The Remote Desktop Management service terminated with the following service-specific error %%4294967295

Got this error after a reboot for the monthly MS hotfixes. After messing around too much, I finally found the problem and though that I would document it here since I have not found the solution anywhere I looked.
This is in a Remote Desktop setup of two RDCB using a SQL DB that is hosted on a third server. The Remote Desktop Management service would fail to start with the "The Remote Desktop Management service terminated with the following service-specific
error: %%4294967295" error because the SQL Server service hosting the database was offline. It had not automatically restarted after the same hotfixes. So I started the SQL server, then was able to get Remote Desktop Management to start on my RDCB without
any delay.
Philippe Carignan

Hi Philippe,
How is everything going on?
Please check below thread for information.
Remote Desktop Management Service, Service-specific
error %%2284126209
Hope it helps!
Thanks,
Dharmesh

Weblogic app server wsdl web service call with SSL Validation error = 16

Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
 System.setProperty("javax.net.ssl.trustStore",”cacerts”);
 System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
 System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
 System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
 <wsp:Policy wsu:Id="TokenServices_policy">
 <wsp:ExactlyOne>
 <wsp:All>
 <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
 <wsp:Policy>
 <sp:TransportToken>
 <wsp:Policy>
 <sp:HttpsToken RequireClientCertificate="true"/>
 </wsp:Policy>
 </sp:TransportToken>
 <sp:AlgorithmSuite>
 <wsp:Policy>
 <sp:Basic256/>
 </wsp:Policy>
 </sp:AlgorithmSuite>
 <sp:Layout>
 <wsp:Policy>
 <sp:Strict/>
 </wsp:Policy>
 </sp:Layout>
 </wsp:Policy>
 </sp:TransportBinding>
 <wsaw:UsingAddressing/>
 </wsp:All>
 </wsp:ExactlyOne>
 </wsp:Policy>
 <wsdl:types>
 <xsd:schema targetNamespace="http://tempuri.org/Imports">
 <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
 <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
 </xsd:schema>
 </wsdl:types>
 <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
 <wsdl:part name="parameters" element="tns:GetUserToken"/>
 </wsdl:message>
 <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
 <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
 </wsdl:message>
 <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
 <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
 </wsdl:message>
 <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
 <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
 </wsdl:message>
 <wsdl:portType name="ITokenServices">
 <wsdl:operation name="GetUserToken">
 <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
 <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
 </wsdl:operation>
 <wsdl:operation name="GetSSOUserToken">
 <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
 <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
 </wsdl:operation>
 </wsdl:portType>
 <wsdl:binding name="TokenServices" type="tns:ITokenServices">
 <wsp:PolicyReference URI="#TokenServices_policy"/>
 <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="GetUserToken">
 <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
 <wsdl:input>
 <soap12:body use="literal"/>
 </wsdl:input>
 <wsdl:output>
 <soap12:body use="literal"/>
 </wsdl:output>
 </wsdl:operation>
 <wsdl:operation name="GetSSOUserToken">
 <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
 <wsdl:input>
 <soap12:body use="literal"/>
 </wsdl:input>
 <wsdl:output>
 <soap12:body use="literal"/>
 </wsdl:output>
 </wsdl:operation>
 </wsdl:binding>
 <wsdl:service name="TokenServices">
 <wsdl:port name="TokenServices" binding="tns:TokenServices">
 <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
 <wsa10:EndpointReference>
 <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
 </wsa10:EndpointReference>
 </wsdl:port>
 </wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
 at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
 at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
 at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
 at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
 at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
 at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
 at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
 at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
 at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
 at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
 at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
 at com.certicom.tls.record.WriteHandler.write(Unknown Source)
 at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
 at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
 at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
 at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
 at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
 at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
 at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
 at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
 at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
 at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
 at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
 at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
 at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
 at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
 at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
 at javax.xml.ws.Service.<init>(Service.java:56)
 at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
 at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
 at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
 at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(Unknown Source)
 at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
 at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
 at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
 at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
 at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
 at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
 at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
 at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
 at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
 at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
 at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
 at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
 at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
 at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
 at com.certicom.tls.record.WriteHandler.write(Unknown Source)
 at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
 at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
 at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
 at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
 at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
 at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
 at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
 at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
 at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
 at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
 at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
 at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
 at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
 at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
 at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
 at javax.xml.ws.Service.<init>(Service.java:56)
 at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
 at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
 at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
 at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(Unknown Source)
 at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
 at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
 at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error.

Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error. Is this a know issue or has someone been able to successfully install?

Sorry, we haven't tested Firefox on this device yet, and we aren't sure why it isn't working. If anyone (especially with Android development experience) would like to help us debug this problem, please start by creating an account and submitting a bug report at: https://bugzilla.mozilla.org/
Thanks for the report.

Diadem 11 crashed when using AOP5 plugin with no specific error

We have a ASAM-ODS database and are running a Avalon v4.2e server. DIAdem data TDM file is uploaded using openMDM client.
We have installed AOP5 plugin on 2 systems running DIAdem 11 to access the data directly from the ASAM-ODS database. On one machine it is working fine.
On the second machine with the same parameters, when we try to connect, DIAdem hangs and then crashes with no specific error in the log file. DIAdem is not able to refresh the Navigator window and show the data stored in the ASAM-ODS server. The relevant errors are attached and also the log file of the plugin.
How do we debug and resolve the issue? Any pointers would be welcome. We are using aop5dataplugin2_0_1.exe downloaded from the NI site.
Regards,
Shailesh
Attachments:
Error_1.JPG ‏83 KB
Error_2.JPG ‏49 KB
MDM AOP5 plugin.log ‏783 KB

Hi Shailesh,
Is it possible that the computer this worked on has had a newer version of DIAdem or LabVIEW or DataFinder on it? All three of those NI software packages share a layer called USI, which is what the DataPlugins "plug into". The USI layer only upgrades, so even if you installed a DIAdem 2012 evaluation version and then uninstalled it, you would keep the USI version from DIAdem 2012, and your DIAdem 11.0 would use that newer USI version. It is possible that the latest AOP5 DataPlugin is not compatible with 11.0, which was released nearly 5 years ago. I can look into that and get back to you.
Alternatively, DIAdem 11.0 may be struggling to work with a USI version from LabVIEW 2012 or DIAdem 2012. We do regression testing every release with multiple older DIAdem versions, but at some point the newer features don't work with the older software.
Brad

DTP run Time Error : Dump: Internal session terminated with a runtime error

Hi Experts,
I'm facing a problem during loading data from PSA to DSO from DTP. It gives Dump: "Internal session terminated with a runtime error".
When i went to PSA and see the no. of data packages, it is 1532.
Could anybody please help me how to load the data.
Thanks
Ajay

Thanks Srini!!
the load is running for 15 min and then it is throwing dump without a single package extract.
Ok...the same I'm also thinking to selective upload but can you please explain me how do i do that as it has only request in PSA.
and it is a pricing data.
Thanks
Ajay

Internal session terminated with a runtime error(ITAB_DUPLICATE_KEY)

Hi All,
Process Chain is failing While loading data from ODS to Cube iam getting error in DTP level internal session terminated with a runtime error(ITAB_DUPLICATE_KEY).Here my source is CRM.
Can you please suggest me for this issue.
Thanks,
Mahes.

hi Maheesh,
Runtime Error ITAB_DUPLICATE _KEY is resulted because of Duplicate Transfer Structures from different Logical Systems.
You can find the corresponding entries in the table RSISOSMAP ..On executing,we have the option to give the InfoSource name(ISOURCE) for wich the data load got failed with Runtime Error ITAB_DUPLICATE_KEY..
You can coreect this error by running the Program RSAR_RSISOSMAP_REPAIR in repair mode , the program first checks the RSISOSMAP table and corrects any incorrect entries found. A log is then written for the mappings that were corrected.
This will solve your problem.
Please refer to link mention in above thread for more detail i have just summarize the things :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04c82eb-ec7c-2c10-7fae-ca6e764c483a?QuickLink=index&overridelayout=true
Thanks,
Deepak

Error when adding new service invoice with DI Server, error -1114

Hi everybody.
I'm trying to add an serviceinvoice (DocType = 'Service Transaction') with DI Server AddObject method.
The xml-request document looks like this:
<?xml version='1.0' encoding='UTF-16' ?>
<env:Envelope xmlns:env='http://schemas.xmlsoap.org/soap/envelope/'>
<env:Header>
<SessionID>........</SessionID>
</env:Header>
<env:Body>
<dis:AddObject xmlns:dis='http://www.sap.com/SBO/DIS'>
<BOM>
<BO>
<AdmInfo>
<Object>oInvoices</Object>
</AdmInfo>
<Documents>
<row>
<DocNum>1241</DocNum>
<HandWritten>1</HandWritten>
<DocDate>10/08/2005</DocDate>
<DocDueDate>10/08/2005</DocDueDate>
<CardCode>V1010</CardCode>
<DocType>S</DocType>
</row>
</Documents>
<Document_Lines>
<row>
<Currency>USD</Currency>
<LineTotal>7500,00</LineTotal>
<AccountCode>_SYS00000000001</AccountCode>
<TaxCode>LA</TaxCode>
</row>
<row>
<Currency>USD</Currency>
<LineTotal>-7500,00</LineTotal>
<TaxCode>LA</TaxCode>
</row>
</Document_Lines>
</BO>
</BOM>
</dis:AddObject>
</env:Body>
</env:Envelope>
...But I get error eveytime I try to do it, the response document as follows:
<?xml version="1.0"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Body>
<env:Fault>
<env:Code>
<env:Value>env:Receiver</env:Value>
<env:Subcode>
<env:Value>-1114</env:Value>
</env:Subcode>
</env:Code>
<env:Reason>
<env:Text xml:lang="en">Schema Validation Failed</env:Text>
</env:Reason>
<env:Detail>
<ErrorList>
<Error>System Id = 193271344, Line Number = 1, Column Number = 359, Description = Datatype error: Type:InvalidDatatypeFacetException, Message: Invalid chars encountered..</Error><Error>System Id = 193271344, Line Number = 1, Column Number = 488, Description = Datatype error: Type:InvalidDatatypeFacetException, Message: Invalid chars encountered..</Error>
</ErrorList>
<Object>13</Object>
<ObjectIndex>1</ObjectIndex>
<Command>AddObject</Command>
<SessionID>............</SessionID>
</env:Detail>
</env:Fault>
</env:Body>
</env:Envelope>
Why? Which fields are missing or which field values of those I'm sending might be wrong?

Did you try to set the AccountCode also for the 2nd line?
HTH,
Frank

Service PO with service text - Account determination

Hi experts,
When we create Service PO without Service Master, Material Master (Only with service text), how the account determination will happen.
Is there any other way to get the account determination?
Regards
Mohan

Account determination can also happen through material group if not through account assignment.

WCF service setup with certificate authentication error

I have a WCF service setup and I need to use a certificate with it and are getting numerous errors when I attempt to browse it. The 1st error I get is "Security settings for this service require 'Anonymous' Authentication but it is not enabled for
the IIS application that hosts this service."
This sounds like a straightforward error message and setting the authentication method in IIS to anonymous resolves being able to browse the service. But I need to use a certificate and setting authentication to anonymous is obviously not right since we
only want those with the proper certificate to access the service. I have all authentication methods in IIS set to disabled when I get the above error message. I have the SSL settings in IIS for the service set to require a certificate as well. I am using
IIS 8.5 as well.
Here is my config file in hoping someone could point me in the correct direction. The service should only work over HTTPS since we are using a certificate and I need the meta data exposed as well hence the mexHttpBinding. I have searched the web but no solution
is working. Any help is appreciated.
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="HEALookupProxy.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<appSettings>
<add key="aspnet:UseTaskFriendlySynchronizationContext" value="true" />
</appSettings>
<system.web>
<compilation targetFramework="4.5.1" />
<httpRuntime targetFramework="4.5.1" />
<authentication mode="None"></authentication>
</system.web>
<system.serviceModel>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true">
<baseAddressPrefixFilters >
<add prefix="https"/>
</baseAddressPrefixFilters>
</serviceHostingEnvironment>
<services>
<service name="HEALookupProxy.HEALookupService" behaviorConfiguration="HEALookupServiceBehavior">
<endpoint address="" binding="wsHttpBinding" contract="HEALookupProxy.IHEALookupService" bindingConfiguration="HEALookupConfig" />
<endpoint contract="IMetadataExchange" binding="mexHttpBinding" address="mex" />
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="HEALookupConfig">
<security mode="TransportWithMessageCredential">
<transport clientCredentialType="Certificate"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="HEALookupServiceBehavior">
<serviceMetadata httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false" />
<serviceCredentials>
<serviceCertificate x509FindType="FindBySubjectName" storeLocation="LocalMachine" storeName="My" findValue="certnameremoved" />
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />

<directoryBrowse enabled="false" />
<security>
<authorization>
<remove users="*" roles="" verbs="" />
<add accessType="Allow" users="user1, user2" />
</authorization>
</security>
</system.webServer>
</configuration>

Hi spark29er,
>>The service should only work over HTTPS since we are using a certificate and I need the meta data exposed as well hence the mexHttpBinding.
For creating the HTTPS WCF service, first please change the mexHttpBinding to
mexHttpsBinding as following:
<endpoint contract="IMetadataExchange" binding="mexHttpsBinding" address="mex" />
For more information, please try to refer to:
#Seven simple steps to enable HTTPS on WCF WsHttp bindings:
http://www.codeproject.com/Articles/36705/simple-steps-to-enable-HTTPS-on-WCF-WsHttp-bindi .
Then please try to check the following article about how to do the certificate authentication on HTTPS WCF Service:
http://blogs.msdn.com/b/imayak/archive/2008/09/12/wcf-2-way-ssl-security-using-certificates.aspx .
Besides, setting the
includeExceptionDetailInFaults as false can give us more detailed error information.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

OracleDiscoverer4i service terminated with service-specific error 6.

Similar Messages

Maybe you are looking for