OracleOCIConnectionPool and Oracle 8.17 Database

Can the OracleOCIConnectionPool libraries(java:oracle.jdbc.oci.*;) be run against an 8.16 database instances?

The application of the connection pool is a custom connection manager for XSQL servlet, I suppose it could be an EJB ... Unfortunately I am tied to 8.16 for the forseeable future, as you pointed out, the drivers are not certified for that use.

Similar Messages

Mac os 10.5 and oracle 10.2 database

Hi.,
Can any body have oracle database 10.2 installed on mac os 10.5. ?
if yes, please profide details install doc on my email id: [email protected]
--Shyam

Duplicate thread
Mac os 10.5 and oracle 10.2 database
Srini

HIPAA, Sarbanes-Oxley and Oracle Virtual Private Database

Is ORACLE VPD compatible with HIPAA, Sarbanes-Oxley?
Is ORACLE VPD incompatible with a certification?
Thanks in advance,
Alexandre Bailly

user8716187 wrote:
Is ORACLE VPD compatible with HIPAA, Sarbanes-Oxley?
Is ORACLE VPD incompatible with a certification?
This forum is used is discussions about Certifications issued by Oracle (OCA,OCP,OCE,OCP) to people who have satisified the Certification Requirements.
Sox etc are not disccused here.
The following link may or may not be useful [http://www.oracle.com/technology/deploy/security/index.html]
I suspect the database general forum mkay be the best place for your question ... others may know a better forum.
In general this is often discussed under security.
Also 11gR2 has features which may better support some aspect of socks compliance.

Crystal Report and Oracle SDO_GEOMETRY

Hi,
 
 
I'm using Crystal Reports for Eclipse version 2.0.4.r825 with Eclipse 3.5 and Oracle 11g as database. I configured the database connection using ojdbc14.jar. Some of the tables i want to use in the report contains columns using the SDO_GEOMETRY data type and if i try to drag this table in the data tab of the report i get the following "Unexpected ValueType" error:
 
 
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Could not Add Object.
Unexpected ValueType: ValueType=[255]---- Error code:-2147215362 Error code name:unknownError
 at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(ReportSDKException.java:65)
 at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.throwExecFailure(ReportCommand.java:253)
 at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.internalDoCommand(ReportCommand.java:126)
 at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(ReportCommand.java:237)
 at com.businessobjects.crystalreports.designer.uibase.gef.commands.CoreCommand.execute(CoreCommand.java:70)
 at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(DSEDropHandler.java:114)
 at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
 at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
 at org.eclipse.core.runtime.Platform.run(Platform.java:888)
 at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
 at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
 at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
 at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
 at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
 at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:456)
 at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:258)
 at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
 at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method)
 at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:363)
 at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:289)
 at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:172)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3880)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3473)
 at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
 at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
 at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
 at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
 at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
 at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
 at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
 at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
 at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
 at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
 at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
 at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
 at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559
 at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
 at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected ValueType: ValueType=[255]---- Error code:-2147467259 Error code name:failed
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:741)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
 
 
I tried the same with the Crystal Reports 2008 trial version and i'm having the same problem.
 
 
I don't wanna use the geometry column in my report but because of this error i can't use the whole table. Is there a way to avoid this error and still use the other columns of the table. Or maybe there is another way to connect to an Oracle database which can handle this special data type.
 
 
Thanks in advance,
 
 
Jens Keller

Hi Jens,
Views would work also as you noted.
No, if DB manufacturers change/update their Servers/clients they need to follow ANSII 92 standards. If they don't return the correct data type then CR will not "hack" our drivers to fix their issues. We did that for years and was a code nightmare, when they got around to fixing the problem it broke CR again. We decided to follow the standards, it may be our issue sometimes but in this case unique data types typically are not supported by CR. If you want support and it's not a client issue then add your request to the Enhancement Request2 post.
So yes in your case it would make it easier but for others they'll be asking why CR doesn't show all fields. Same reason.... not a CR issue.
Thanks agian
Don

Our Java application is built with java 1.4 version and oracle 10g

Our Java application is built with java 1.4 version and oracle 10g version database, is it possible to upgrade oracle database to 11g?

is it possible to upgrade
Yes. SE and the other editions have a migration/upgrade utility, not seeing any mention of that program in the XE license docs. To upgrade to 11gR2 from 10g, the 10g instance must be at patch 10.2.0.2 or higher.
So if you're a GUI dba, might be out of luck. But the the XE install has the catalog upgrade scripts that need to be run, there is a MOS note explaining the manual upgrade steps.
Or set up a brand new 11g database instance and datapump your user schema(s) from the 10g instance to the new 11g instance. The database doesn't care what java version you're using, it just does what its told with the data. DDL, DCL, DML ... its not much different. Quite a few new features in 11g.
But if you're after JVMs that piece is not supported with XE.

A book for php and oracle

Hi.I' m working in an application using php for web development and oracle for server database.My question is until now I found many links about this subject also many books about oracle,plsql and many books about php but I can't found a book about php with oracle and plsql.So my question is are there books about php and oracle?
Thanks in advance thrylos

I have seen one in my local book shop, not sure about Internet though.

Error On Attach File in Apex 4.0.2 And Oracle database 10.2.3.0

hi all
i using Apex 4.0.2 and Oracle database 10.2.0.3
i have Blob Item in table and i wanted upload a file to Blob Item .
when i used Attach file button at the first saving connection failed and the second time successfully
How can i Fixed this problem?
Tommy
Edited by: Tommy on Sep 4, 2011 10:50 AM

Hi,
The absolute link works fine, but opening it in IE, I will get the following error message:
Internet Explorer could not open http://localhost:8080/i as a Web Folder.
I have troubles with Windows Server 2003, I'm going to install APEX in XP. Thank you.
Guys, I installed APEX on Windows XP and the borwser seems to give the same message about creating a webfolder. I'm unable to create one, please help will be appreciatied.
Regards,
Edited by: 873013 on 17-jul-2011 12:05

Using Coherence and Oracle Database as the CacheStore

We are working on implementing a solution using Coherence and Oracle Database as the CacheStore. We initially implemented the Cache as a distributed-scheme which in turn uses the backing-map-scheme. We are trying to introduce transaction management and I used a scheme-ref in a transactional-scheme to point to an already existing distributed-scheme. However when I bring up the server, my custom coherence-cache-config.xml file is not recognized and Coherence comes up with the default setting. Given below is the snippet of my configuration file.
1) I would like to understand why the below configuration doesn’t work and am I doing it the right way? If not, what is the correct way of doing it?
2) There are a multiple transaction management options given in the documentation. Which are the ones that will work with a distributed-scheme and read-write-backing-map-scheme?
3) If transactional-schemes cannot work with distributed-scheme, what is the best way to have a distributed cache with a oracle database as a cache store?
<caching-scheme-mapping>
<cache-mapping>
<cache-name>id<cache-name>
<scheme-name>example-transactional<scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<transactional-scheme>
<scheme-name>example-transactional</scheme-name>
<scheme-ref>distributedcustomcache</scheme-ref>
<thread-count>10</thread-count>
</transactional-scheme>
<distributed-scheme>
<scheme-name>distributedcustomcache</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<read-write-backing-map-scheme>
<internal-cache-scheme>
<local-scheme>

<scheme-name>inMemory</scheme-name>
</local-scheme>
</internal-cache-scheme>
<cachestore-scheme>
<class-scheme>
<class-name>spring-bean:coherenceCacheStore</class-name>
<init-params>
<init-param>
<param-name>setEntityName</param-name>
<param-value>{cache-name}</param-value>
</init-param>
</init-params>
</class-scheme>
</cachestore-scheme>

</read-write-backing-map-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>

Hi,
If you look at the documentation for transactional-scheme here: http://docs.oracle.com/cd/E24290_01/coh.371/e22837/appendix_cacheconfig.htm#BHCIABHA
you will see that it says The transactional-scheme element defines a transactional cache, which is a specialized distributed cache. That means that a transactional-scheme is already a distributed-scheme.
You will see from the same documentation above that there is no way in a transactional-scheme to configure things like cache-stores or listeners or even the backing-map-scheme as these are not supported on a transactional-scheme - so you cannot use a cache store.
Personally I would not use transactional-scheme unless you have some really big reason to do so - the restrictions far outweigh any perceived advantage of having a transaction. There are better ways to build applications so they do not require transactions, that is what we have been doing for years with Coherence so far, and there is no real reason to change that.
JK

Sequencing and Trigger on Oracle 9i lite database

We created a schema (TESTSCHEMA) on Oracle 8.1.7 Enterprise edition and have a created a trigger which will use the sequence object to generate primary key for the table (TEST_TABLE)
Sequence creation:
CREATE SEQUENCE TESTSCHEMA.TEST_TABLE_SEQUENCE START WITH 6000 INCREMENT BY 1 MINVALUE 6000 MAXVALUE 6999 NOCACHE NOCYCLE NOORDER ;
Trigger creation:
CREATE OR REPLACE TRIGGER TEST_TABLE INSERT BEFORE INSERT ON TEST_TABLE FOR EACH ROW
DECLARE
pkValue NUMBER;
BEGIN
pkValue := 0;
Select TEST_TABLE_SEQUENCE.NextVal into pkValue from dual;
:NEW.TEST_KEY := pkValue;
END TEST_TABLE_INSERT;
We have created a snapshot of the schema on mobile server, synchronized the data with the client (Win32 for testing purpose).
The trigger works fine on the server, but when I run the same query on the lite database with msql it gives me an error:
[POL-3221] null key in primary index
I was wondering if Sequence generation and Triggers are supported on Oracle 9i lite database ? Or am I missing out something ??
Any information/ help is appreaciated
Thanks
Neeraj

You can't use SAVEPOINT / ROLLBACK TO SAVEPOINT statements in the database trigger:
ORA-04092: cannot SET SAVEPOINT in a trigger
ORA-04092: cannot ROLLBACK in a trigger
I am not sure what you need exactly, but you can try this:
Simulating ROLLBACK TO SAVEPOINT Behavior in a Database Trigger
http://www.quest-pipelines.com/pipelines/plsql/tips02.htm#JUNE
Regards,
Zlatko Sirotic

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

4195bee8-4db0-4799-a674-18f89aa500cb wrote:
i dont have access to My Oracle Support can u send text or html of document please?
Moderator Action:
No they cannot send you a document that is available only to those with access to MOS.
That would violate the conditions of having such service contract credentials.
Asking someone to violate such privileges is a serious offense and could get that other person's organization banned from all support and all their support contracts cancelled.
Your post is locked.
Your duplicate post that you placed into the Audit Vault forum space has been removed (it had no responses).
This thread which you had placed in the Solaris 10 forum space is moved to the Audit Vault forum space.
That's the proper location for Audit Vault questions.

Reports from Java and Oracle database

Hi
I need to generate couple of reports from my application, with Java as front end and oracle 11.2.0.3.0. database . Reports are having very simple select statements, using the criteria users enter from GUI. we don't need to execute a direct select statement from Java, with the where clauses . I did some research and found out about Pipelined functions. I tested for a small set of records and it worked fine. Will this work for large data set? any drawbacks of using this method? Any other methods for this requirement?
Thanks in advance
JP

Pipeline table functions do not sound like the appropriate approach. It is designed to primarily deal with data transformations. Using it as a rendering engine for report writing? There are fundamental problems with such an approach.
As Dave and Andre commented - the CORRECT means for PL/SQL to pass "data" to Java (or other client languages) is via reference cursors (pointers that the client can use for referencing SQL cursor programs on the server). And Java as a report writer does not really compare with the ease and flexibility that Oracle Apex (Application Express) provides as a reporting framework.

Install Oracle Application server 10g and Oracle database 10g on same box

Hi Experts!
i need to install Oracle database and oracle application server on the same machine(windows xp).
when i install both of them and reboot the machine either oracle database or oracle application server fails...
i suspect that the problem might be due to two - ORACLE_HOME
let me know how i can resolve this issue.
Note: Oracle DB and OAS OPMN process run as a windows service.
after restart opmn fails
Many thanks in advance
-Raghav

Jacco, in spite of your ace :-) this time I cannot
completely agree with you:
I hope sincerely that this ace thing doesn't "scare" anyone from challengeing me. I can't know everything, even though this ace sign suggests it.
- things like ORACLE_HOME are also set in the system
environment settings. This may lead to conflicts;It does, therefore you should set them with the service (I figured the installer of Oracle would actually do that for you, but I hardly ever work with Windows)
- the database and AS have different versions of the
RSFs. The most recent AS version is using 10.1.0.5
RSFs, where the database uses 10.2.x. This leads to
conflicts.
- Port conflicts are common in the ONS area, however
this should not prevent startup and should not be
very likely at this point since all products use the
same inventory and it should have been checked for
ports that are in use.ons port conflics shouldn't precent startup, but other port conflicts can.
>
With the total of our posts the problem should be
resolved anyway ;)Exactly, as long as the reader has the proper knowledge to understand them ;)
(this feels like a post just to make sure that you know I respect your opinions and advices)

Oracle 10G and UCCX 5.0 Database Connection return 0 rows on query

Currently I have an issue with UCCX 5.0 and Oracle 10G, we need to access a table on an Oracle10G DB, form IP IVR, so I installed the driver, created the ODBC connection and declared the ODBC, user and password on the Database subsystem (name on UCCX match the ODBC name) and restarted the engine.
Im trying to do simple select statement (SELECT * FROM TABLE) and I'm getting a 0 count once I test it.

Hi,
I see it has been a while since you posted this question, but I am having exactly the same problem with an Oracle integration and I was wondering if you were able to fix this and how.
Your reply will be greatly appreciated.
Regards,
Eduardo

Auditing in oracle 10g database and oracle 10g application server

Dear friends,
We have oracle 10g application server and oracle 10g database server in place.My criteria is to audit users connected using oracle application user credentials to the database.
Can you please tell me how can i do it.
Thanks & regards,

Its the database connection you want to track. The session audit will show where it came from.
Auditing is turned using this command:
alter system set audit_trail = DB scope=spfile;
Note: The use of spfile will require a DB bounce before audit starts
To audit Sessions:
audit create session;
Query by Audit Type:
SELECT A.USERNAME,
OS_USERNAME,
A.TIMESTAMP,
A.RETURNCODE,
TERMINAL,
USERHOST
FROM DBA_AUDIT_SESSION A
WHERE USERHOST = <replace with iAS servername> ;
By User
SELECT USERNAME,OBJ_NAME,ACTION_NAME , TIMESTAMP
FROM DBA_AUDIT_TRAIL WHERE USERNAME = 'SCOTT';
Check for users sharing database accounts
select count(distinct(terminal)),username
from dba_audit_session
having count(distinct(terminal))>1
group by username;
Attempts to access the database at unusual hours
SELECT username, terminal, action_name, returncode,
TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS'),
TO_CHAR (logoff_time, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') <
TO_DATE ('08:00:00', 'HH24:MI:SS')
OR TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') >
TO_DATE ('19:30:00', 'HH24:MI:SS');
Attempts to access the database with non-existent users
SELECT username, terminal, TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE returncode <> 0
AND NOT EXISTS (SELECT 'x'
FROM dba_users
WHERE dba_users.username = dba_audit_session.username);
Other audits you might consider:
audit grant any object privilege;
audit alter user;
audit create user;
audit drop user;
audit drop tablespace;
audit grant any role;
audit grant any privilege;
audit alter system;
audit alter session;
audit delete on AUD$ by access;
audit insert on AUD$ by access;
audit update on AUD$ by access;
audit delete table;
audit create tablespace;
audit alter database;
audit create role;
audit create table;
audit alter any procedure;
audit create view;
audit drop any procedure;
audit drop profile;
audit alter profile;
audit alter any table;
audit create public database link;
Best Regards
mseberg

Database independant ETL in ODI for SQL Server and Oracle

Hi,
We have a requirement to create ETL which can be run for both SQL Server and Oracle.
We have some tables to be filled from operational database to data warehouse using business requirement.Our goal is to create code which should be database independant.
We will provide all DB details at the start of execution and it will code for as per provided details.
The same can be achieved by Talend.
I wanted to know if same can be achieved in ODI.
Any pointers regarding this would be helpful.
Thanks,
Mahesh

A quick trick: Provide one more value at the start of execution. It is something like a flag. For example db_flag. It can be either 'O' or 'S'.
Open both oracle and sql server KM. Copy one of the KM code to other KM and put an if condition to check the flag.
if (#DB_FLAG.equalsTo("O")){
Oracle code goes here...........
}else{
SQL Server code goes here...........
Its a pure KM customization.
Bhabani
http://dwteam.in

OracleOCIConnectionPool and Oracle 8.17 Database

Similar Messages

Maybe you are looking for