OracleVM-Server-3.1.1-build365.ovf fails to import

I am having no luck importing OracleVM-Server-3.1.1-build365.ovf in to Virtual Box 4.26 r82870 running on Mac Pro with Mountain Lion 10.8.2.
I take the following actions:
1. Navigate to OracleVM-Server-3.1.1-build365.ovf in Finder
2. Double Click which then opens VirtualBox Manager
3. A box saying reading appliance is open which is busy for some seconds but then the following error is given:
Failed to import appliance /Volumes/Data 1/OracleVM-Server-3.1.1-build365.ovf.
Start tag expected, '<' not found.
Location: '/Volumes/Data 1/OracleVM-Server-3.1.1-build365.ovf', line 1 (0), column 1.
Result Code: VBOX_E_FILE_ERROR (0x80BB0004)
Component: Appliance
Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
I have tried multiple downloads of the same file however all efforts end with the above error.
Please can some one help ? I am able to open other VBOX VM's from Oracle.
md5 check has been done and sum is fine.

Hi, I'm afraid there is not a fix but perhaps an alternative option.
Apple believe that Lion is too old to be worth supporting so they can't be bothered and provide comical advice: http://support.apple.com/kb/TS5279
Fortunately there is still a way to manage clients from Jaguar to Mavericks which is a little more reliable in a local network, the ancient and trusted Workgroup Manager: http://support.apple.com/kb/DL1698 , you can apply settings over a VPN client also if the remote Mac is bound to your directory.
Not the best solution but seems to be the only one which works, I'd hate to rely on OS X Server in a medium to large business environment.

Similar Messages

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

The attempt to connect to the server (IP address) on port 443 failed - OLT

Hi all
I am facing one problem, if i run load to any application for 100 users for 1 iteration then it is not showing any error. Lets say i ran the load of 100 users for one hour then for some users there are errors like
Line: (script.java:84)][ScriptException]: The attempt to connect to the server (IP address) on port 443 failed.
And my understanding is the user's which are facing failures is not able to get response or page loaded at their end. As failures are occuring for some particular steps not the entire scenario. Pls confirm.
Thanks

I believe that's an indication that there is an error receiving mail, but if you have any drafts or email in your outgoing mailbox, try deleting them. Apple's troubleshooting steps for this are (from http://support.apple.com/kb/TS4002):
Cannot receive mail in OS X Mail
If you use OS X Mail, look at the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dim and has a lightning bolt next to it, your account is offline. To resolve this, make sure your computer is connected to the Internet. Then choose Go Online from the Mailbox menu.
If taking your iCloud account online doesn't resolve the issue, follow these steps:
From the Mail menu, choose Preferences.
In the Preferences window, click the Accounts tab if it is not already selected.
In the Accounts list, select your iCloud email address.
Click the Account Information tab.
Verify your SMTP server settings with the following information:
Incoming Mail Server: imap.mail.me.com
User Name: Your iCloud email address
Password: Your iCloud password
Click the Advanced tab and verify the following additional settings:
Port: 993
Use Secure Sockets Layer (SSL): Should be enabled
Authentication: Password

Exchange server 2010 console not opening, inialization failed

hi,
exchange server 2010 console not opening, inialization failed when i have upgraded service pack to sp1.
please suggest asap or u can reach me @
[email protected]
[email protected]
+918750003544

Even I found the same issue once, and then I realised that the SP and RU should be same in exchange sever and the machine where the issue is.
Could you please check the same if that machine has the same Sp and RU, if not, please upgrade the same? I bet it will start working
Regards,
ASP20
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Error determining whether the target server is already a domain controller: Failed to open the runspace pool

Hi there , i already have some others DC running w2k12 R2 on the env, but when i was promoting another new DC running w2k12 R2 on the middle of the AD sync , the server encounter an error and rebooted it self ; after the server came back online , it keep
saying that a configuration is required for AD Domain Services , like the step when you are about to promote the server , but when you try to promote it , the error "Error determining whether the target server is already a domain controller: Failed
to open the runspace pool. The server manager winrm plug-in might be corrupted or missing."

Hi,
Thanks for your post.
Please waitting for the replication is finished and rerun the domain prep command to check the result.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Import Server fails to import if repository has password

Hi,
I am using MDM SP05 Patch2 on Windows Server.
I added a login password to my repository. Now what happens is the import server fails to import files for that repository giving the error :
"<i>[MDS=MDM Repos=Repo]: CatMgrClientWorker.Connect() failed. RC: 0xffaa0200 Invalid logon credentials</i>"
After changing the password, i restarted MDM Server and Import Server both.
But if i remove the password from my repository, the import runs successfully.
Someone pls suggest.
Regards,
Chintan

Hi Danish,
The process of changing the password in .ini files works till MDM 5.5 version.
From MDM 7.1 version, the password Must be Changed only at the Auxilliary level. Changing it in the .ini file directly will have no effect.
In MDM 7.1, configuration of some repository-specific MDIS/MDSS parameters moved from the repository sections of mdis.ini/mdss.ini to a new MDIS/MDSS-specific Repository Detail pane in MDM Console.
When you connect to the Auxilliary servers, you fill find both the configurations for MDIS and MDSS:
User: The user name MDSS uses to access the MDM repository.
Password: The password MDSS uses to access the MDM repository.
Use the same password that you have assigned to Admin in the Console.
You can refer to the Console Reference guide : page number 263.
If you have already done this, can you please check the log file and let us know if you find anything.
Thanks,
Priti

Business Server exception: attempt to establish connection failed.

Hi.
I'm a total newbie to the BPA Suite, but I have experience with other tool sets like MEGA. I've downloaded and installed an evaluation copy of version 10.1.3.4 of the tool.
I'm working through the Business Process Architect Quick Start Guide, going through the sample Quote to Cash process. Everything is progressing relatively well as I go through the document (except that the QuoteToCash project is already loaded in the LOCAL business repository without me having to load it separately), until I get to the first simulation.
When I go to the Simulation module, I get an error: "Server access exception: Business Server exception: attempt to establish connection failed."
I don't know what's wrong, but there are a couple of things I'm thinking about. One is that I didn't install XE separately, so I think that I'm just using the default Oracle Lite instance that gets installed with the tool. Another is that my account is configured without administrator privileges, so I generally have to run installers as a separate user with administrator privileges to get things to work.
Any suggestions would be greatly appreciated!
Thanks.

It might be bad form to answer your own question, but after further experimentation, I think that it's a permissions problem.
I repeated the installation on another (virtual) machine on an account that is an administrator, and I can simulate the Process Order process as described in the Quick Start Guide to my heart's content.
Now, the second machine isn't configured exactly the same as the first machine, so there could be other underlying or contributing factors. But I'm un-stuck for now.
I just thought I'd share what I found. Thanks.

In place upgrade of Server 2003R2 STD to 2008 SP2 fails at "Gathering Files"

I have a customer with two identical Dell servers. They both had Server 2003R2, and are both DC's. I did an inplace upgrade on the primary server in December to Server 2008 SP2 STD x86 without issue. I have since gone onsight to upgrade the second server
to 2008 and the installation fails at the "Gathering Files" part of the installation.
I have tried new medai, checked the event log. All I get is a popup that says "Installation encountered and error and cannot continue" and then I am back to the 2003 desktop. All of the pre-work completed without fail as to the domain prep etc. I cannot
find any reference on line as to this issue save for a few regarding Vista. I know Vista and Server 2008 SP2 are the same kernal, but the one solution I found was to remove user accounts, which i cannot do as its AD controller.
Please advise, as this is a remote customer and I only get on site 2 to 3 times a year and this upgrade is behind schedule. Thank you in advance for your asistance.
Shayne Noel
LAN Admin
Alberni technology Solutions
250 731 9625

Hi,
I suggest performing a Clean Boot first. This can reduce third-party software conflictions during the upgrading.
Clean Boot
========
1. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.
Note: Please click Continue if the "User Account Control" window pops up.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
4. Restart the computer and test the issue.
Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility,
check the box of "Don't show this message" and then click "OK".
Then upload all unnecessary hardware devices such as sound card, network card and external USB drives.
Now upgrade to Windows Server 2008 again.
If any error message appears, please let me know the exact wording of the error message.
In addition, please upgrade the following files (if they exist) to
https://sftus.one.microsoft.com/choosetransfer.aspx?key=b7d773d8-200a-4532-bc95-4a1c5a506dd3
Password: i!94cn^n7+m_6
C:\windows\panther\setupact.log
C:\windows\panther\setuperr.log
C:\windows\panther\unattendgc\setupact.log
C:\windows\panther\unattendgc\setuperr.log
C:\windows\setupact.log
C:\windows\setuperr.log
Tim Quan
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not
actually answer your question. This can be beneficial to other community members reading the thread.

How to Convert standalone .OVF\VMDK file to VHD, without having a VMWare server. We have a .OVF file on USB drive

How do I Convert standalone .OVF\VMDK file to VHD, without having a VMWare server. We have an .OVF file on USB drive. Running Hyper V 2012 SP1 and need to convert this to run on our system. Basically a vender of ours has decided
not to house our servers that they used to support one of our environments. They used VMware and we are a Hyper V shop. Now they are sending it back in an OVF format and telling us to convert it to VHD. Only tool I found was Microsoft converter
tool and you need a VMware server to do that. The exporter tool is another but doesn't actually do any conversion. Can anyone help?
Thanks
Eric

If the Java application must be stand-alone you must not deploy it on WebLogic, then WebLogic will manage its lifecycle.
In this case you can use the CommonJ API and use the timermanager if it must run on a certain time. More information
of how to do this can be found here: http://middlewaremagic.com/weblogic/?p=5569
If you keep the Java application stand-only and want to use a cron job you can follow the example presented here: http://middlewaremagic.com/weblogic/?p=7065
Note that the example runs a WLST script, but you can follow the same steps to run your Java application.

EWS, Office 365, An internal server error occurred. The operation failed.

I am using EWS 2.0 to access a users calendar in Office 365. I use AutoDiscover to find the ExchagneService, then bind to the calendar via CalendarFolder.Bind and at the next statement folder.FindAppointments I get the error
An internal server error occurred. The operation failed.
I know that the credentials used to access the user are correct - have tested in the webmail and it works just fine.
If I use my own credentials (after having assigned rights to the user in question) my program does not fail. Only apparent difference is the administrator role.
Below I have listed the central parts of the code:
First the AutoDiscover (which work)
service = new ExchangeService(ExchangeVersion.Exchange2010_SP1,TimeZoneInfo.Local ); // service is a global variable
service.Credentials = new NetworkCredential(ConfigClass.CalendarReaderName, ConfigClass.CalendarReaderPassword);
service.AutodiscoverUrl(cal, RedirectionUrlValidationCallback);
Then the part where I want to get the appointments
CalendarView view = new CalendarView(_firstdate, _lastdate);
Mailbox mailbox = new Mailbox(cal); // cal is the e-mail address of the user
FolderId id = new FolderId(WellKnownFolderName.Calendar, mailbox);
CalendarFolder folder = CalendarFolder.Bind(service, id);
FindItemsResults<Appointment> findResults = folder.FindAppointments(view); // This is where the error occurs
Anybody know what this error actually means and how to solve the situation. I want to run the program using a service account rather than my personal credentials.

the error came back - but the trace revealed the error:
        <m:ResponseMessages>
          <m:FindItemResponseMessage ResponseClass="Error">
            <m:MessageText>An internal server error occurred. The operation failed.</m:MessageText>
            <m:ResponseCode>ErrorInternalServerError</m:ResponseCode>
            <m:DescriptiveLinkKey>0</m:DescriptiveLinkKey>
            <m:MessageXml>
              <t:Value Name="InnerErrorMessageText">Too many concurrent connections opened.</t:Value>
              <t:Value Name="InnerErrorResponseCode">ErrorTooManyObjectsOpened</t:Value>
              <t:Value Name="InnerErrorDescriptiveLinkKey">0</t:Value>
            </m:MessageXml>
          </m:FindItemResponseMessage>
        </m:ResponseMessages>
      </m:FindItemResponse>
    </s:Body>
</s:Envelope>
</Trace>
The account is used for other purposes as well - looking into other calendars. And I have seen this limitation before and read that it is a timing issue.
I guess I need to use another account ...

Mac mini server and harddrive 1 of 2 failed now fan runs full speed

I have a 2010 mac mini server. One of the drives failed.
I took out the bad one and the fan started to run full speed.
Replaced that drive with a new one. runs great but fan is running.
I put the temp sensor in exact same place but had to use a small pc of tape
to hold it on. I used the same tape that was holding the wires to the drive.
I used the temp sensor connector on the logic board closest to the fan connector?
Does that matter?

Hello, possible work arounds...
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.  It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating.
Free SSDFan Control...
http://exirion.net/ssdfanctrl/

Advisor failed to import the latest advisor knowledge management packs

Hello All facing this issue from couple of days, troubleshooted from every perspective but haven't got any successful result...
Event Description: Failed to import the latest Advisor Management Packs to the Management Server.
Reason: System.ArgumentException: The requested management pack is not valid. See inner exception for details.
Parameter name: managementPack ---> Microsoft.EnterpriseManagement.Common.ManagementPackException: Verification failed with 1 errors:
Error 1:
Found error in 2|Microsoft.IntelligencePacks.OfflineUpdate|7.0.9401.0|Microsoft.IntelligencePacks.OfflineUpdate|| with message:
Could not load management pack [ID=Microsoft.IntelligencePacks.Types, KeyToken=31bf3856ad364e35, Version=7.0.9401.0]. The management pack was not found in the store.
: Version mismatch. The management pack ([Microsoft.IntelligencePacks.Types, 31bf3856ad364e35, 7.0.9366.0]) requested from the database was version 7.0.9401.0 but the actual version available is 7.0.9366.0.
Summary
The latest Management Packs for the Advisor connector have not been imported to the management server database.
Causes
Management Pack Update Failed (55032,55008), Management pack Update SCOM Error(55031), Management Pack Update Import Failed (55006)
Resolutions
Refer to the Operations Manager event log on the management server for more information
NOTE:
Proxy settings are configured on server as well as on console...
REGARDS DANISH DANIE

Hi,
According to the error message, "The management pack ([Microsoft.IntelligencePacks.Types, 31bf3856ad364e35, 7.0.9366.0]) requested from the database was version 7.0.9401.0 but the actual version available is 7.0.9366.0."
We may need to check the management pack's version.
Have you applied the SC advisor connector?
System Center Advisor Connector for Operations Manager
http://www.microsoft.com/en-us/download/details.aspx?id=38199
Regards, Yan Li

Ldif2db command fails to import data and deletes the root node

ldif2db command fails to import data into LDAP.
The command used was
ldif2db -n userRoot -s "dc=example,dc=com" -i test.ldif
The test.ldif conains the nodes under dc=example,dc-com
eg: ou=test,dc=example,dc=com
But on executing the command the root node "dc=example,dc=com" itself got deleted. The console output was like "Skipping entry uid=test001,ou=test,dc=example,dc=com" for all the entries present in ldif.
What might be the reason for this ? Any clues ?
The reason y i am trying to do this ldif2db is to preserve the createtimestamp and modifytimestamp while migrating data from one Directory Server to another. Any other ways of doing it ?

ldif2db is the right command to migrate data and preserve those attributes like createtimestamp and modifytimestamp.
However, when this command is used, it will first remove everthing before it load whatever you want. So you need to be very careful. I got this terrible problem as well.
In my experience, if you use this command, don't use "-s". You can just use:
ldif2db -n suffixName -i test.ldif
If you only have one suffix (database), then you can use "-n userRoot".
Also, if you migrate your data from server A to server B, you'd better dump the data using db2ldif -n userRoot -a test.ldif from server A. Then load it into server B using ldif2db -n userRoot -i test.ldif.

Failed to import ActiveX control

I am using VB2005 express and VC#2005 express. With my old friend
VS2003, whenever i needed to add flash to my WInforms, all i needed to
do was to add the control as a com component and drag it on the stage
from the toolbar. Now, when i did the same in new express version,
althogh it is added in the toolbars and the references list, but still,
whenever i try to drag a shockwave flash instance on my win form, i get
the error:
Failed to import ActiveX control, please ensure it is properly registered.
does some one have any idea how to add flash comntrol as we used to do in earlier versions? Please reply this ASAP.
Thanks and regards.
Syed Mazhar Hasan

None of these solutions are working for me.
In VS2005 I'm stuck. I also have VB6 installed, and there the OCX imports fine. In VS2005 I get the above error message, but sometimes I also get a ResolveComReference error.
1) When I go to the obj directories the interop files aren't even generated (so the delete then re-add solution doesn't work for me).
2) running tlbimp on the ocx gives me a TI0000.exe error - Error loading library
3) running aximp on the ocx generates a TYPE_E_CANTLOADLIBRARY error.
This ocx has loaded fine in VS2005 before I reformatted my PC, and loads fine on other machines. VS2005 is local, but our code is on a server share drive, so my first thought was some kind of security settings was messed up, but I moved everything to a local drive and still no dice.
I've also made sure that I have the latest VS2005 service packs, and XP is compeletly up-to-date.
I've been working on this for almost a week with no progress, and I'm getting pretty desperate. Anyone have any other ideas?

Records fail to import

Hi All,
When i perform import through import manger.
I get a message that the some records failed to import because they are used in WF.
I understand the reason of failure..However when the Import log pops up on failure of import.
This import log does not seem to give any particular info of which records have failed.
No unique Id of the record.How will i be able to find out ,if i have imported 50000 records and some records fail while importing.
How will i find out which records have failed.?
Thanks
AJ

Hi Amruta
ENABLING TRACING AND AUDIT TRAILS IN THE IMPORT LOG
The Verbose parameter in the mdis.ini file controls how much
information is included in the Import log (see u201CMDIS Configurationu201D on
page 396 for more information about the mdis.ini file).
Settings for the Verbose parameter in are described in Table 91.
Table 91. Verbose Parameter Settings
Setting Hexadecimal Description
Verbose OFF 0x0000 Turns off all verbose settings
Verbose ON 0xFFFF Turns on all verbose settings
FI Verbose 0x0001 Adds verbose field information
XML Verbose 0x0002 Adds verbose XML processing information
MAP Verbose 0x0004 Adds verbose field mapping information
THRD Verbose 0x0008 Turns on STRUCTX, VALUEX, and IMPORTX settings
PARSER Verbose 0x0010 Adds XML/text parser audit trail
STRUCTX Verbose 0x0020 Adds structural exception thread audit trail
VALUEX Verbose 0x0040 Adds value exception thread audit trail
IMPORTX Verbose 0x0080 Adds import exception thread audit trail
CHUNK Verbose 0x0100 Adds chunk processing audit trail
VxR Verbose 0x0020 Adds virtual extended record audit trail
Last option may help you. Also the logs can be accessed via the Server/MDIS/Logs where you can see the Import logs.
best regards
Ravi

OracleVM-Server-3.1.1-build365.ovf fails to import

Similar Messages

Maybe you are looking for