ORADAV problems - ORA-20504: User not authorized to perform the req
Anyone have any idea why we may not be allowed to upload files to portal via oradav or webdav?
We have checked the edit region to allow all files, quota is unlimited and we're using portal as a priviledged user (manage) for the page group.
We are however allowed to upload "zip" files only, but we're not allowed to unzip them! Apparently we're prohibited from uploading or creating files, since unzipping creates files, it fails as well.
Any suggestions?
bump
Similar Messages
-
Oracle drive and oradav - ORA-20504: User not authorized to perform the req
Anyone have any idea why we may not be allowed to copy files to portal?
We have checked the edit region to allow all files, quota is unlimited and we're using portal as a priviledged user (manage) for the page group.
For some reason we are globally blocked from copying files to /dav_portal/portal.
Any suggestions?I have the exact same problem on Oracle Portal 10.1.4 while I'm using Windows XP. I never had the webdav problem when I was using Windows 2000/NT on older versions of the portal. There is a note on Metalink (Note:338932.1) that seems relevant to this issue but I haven't been able to try WebDAV while using a different OS than Windows XP to confirm that is the bug I've encountered. The solution in that note says "Wait for the bug fix (no earlier than Portal 11.0) OR Use a client other than Windows XP."
I found another note (Note:367860.1) with the solution being to install and use the Oracle Drive client. Did that, and still got an "Error 5: Access is denied" alert when trying to add a file to a plain portal page with NO tabs and a single Items region that allows users to add content to it. Next, under that page's properties on the Items tab, in the Default WebDAV Types section, changed Default Regular Files to Simple File and tried adding a file using WebDav and ta-daaaa! It worked. However, I don't want to use the Simple File item type, I want to use the regular File!!! And yes, I have made some customizations to the File item (changed defaults, re-order attributes, etc.) Not sure what to do next. Any ideas??? -
Internal Error - User not authorized to use the gross profit module
We have a client who has a limited logistics license and just recently moved to 8.8. in the past he could deliver directly from a pick list but now he is getting an error "User not authorized to use the gross profit module". Is this something related to an authorization setting? Before the move this task was not an issue. Please advise.
Thank you.
ReneHi Gordon, one of our user just experienced the same problem in sales order.
In Form Settings he ticked "Display BP Catalog Number", and while he entered the catalog number he got the same error message.
I'm not sure what this has to do with the gross profit base method...maybe the fields "Gross profit" and "Gross profit base price"? Don't know where to set them up.
Thanks. -
Report exection problem for one user - not able to see the data.
Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,
-
Web Services Test ORA-28150: proxy not authorized to connect as client
Oracle 11g R2 APEX 4.2 with the latest listener.
Trying to click on the test button on the Oracle.example.hr sample under the SQL WORKSHOP Restful Services and receive the following error:
Internal Service Error 500
Error during evaluation of resource template: GET hr/employees/, SQL Error Code: 28,150, SQL Error Message: ORA-28150: proxy not authorized to connect as client
I have the APEX_REST_PUBLIC_USER and APEX_LISTENER created from the supplied scripts and have executed the DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE.
We can't get the web services to work.
2 days wasted on this issue; Any help would be greatly appreciated!
Edited by: 970698 on Nov 13, 2012 6:39 AM
Edited by: 970698 on Nov 13, 2012 6:40 AMThe error is saying that for whatever reason APEX_REST_PUBLIC_USER cannot proxy to the SCHEMA (APEX WORKSPACE) where the RESTful Service is defined.
Allow me explain how RESTful Services are invoked in Listener 2.0
- It is important that the RESTful Service is invoked as the SCHEMA user that the RESTful Service is defined in, to make sure the correct database security rules/constraints are applied when executing the query/pl sql block associated with the service.
- The mechanism Listener uses to do this is called connection proxying, which is a facility provided by the Oracle database to switch a connection from one user to another.
- Of course if you could switch from user A to user B without restriction that would not be good. Instead user B must grant user A the privilege to proxy to user B's identity.
- Thus when an APEX workspace first has a RESTful Service created in it, it performs this grant, giving APEX_REST_PUBLIC_USER the privielge to proxy to the workspace/schema where the RESTful Service is defined.
- Then when the RESTful Service definition is being evaluated for execution by the listener it proxies from APEX_REST_PUBLIC_USER to the workspace schema user immediately before executing the query/plsql of the service.
- It looks like the granting of the proxy privilege has not happened/failed for some reason.
Can you tell me:
- If the workspace where the service was defined is a newly created workspace, i.e it was created after installing APEX 4.2?
- If the workspace was created before or after running apex_rest_config.sql?
A manual workaround for your problem would as the SYS user, do:
ALTER USER <apex_workspace_name> GRANT CONNECT THROUGH apex_rest_public_user;
Regards,
Colm -
" User not authorized" error while deploying webdynpro application on WAS
I am getting following error while deploying dyn pro application on WAS
Error
May 17, 2005 6:37:21 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Settings
SDM host : DYNPRO
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/720359/LOCALS1/Temp/temp50603PVTOSAP.ear
Result
=> deployment aborted : file:/C:/DOCUME1/720359/LOCALS1/Temp/temp50603PVTOSAP.ear
Aborted: development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [DYNPRO] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
Additional Log :
May 17, 2005 6:37:21 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[002]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7162 - 630_SP]/>
<!NAME[D:\usr\sap\DYN\DVEBMGS00\SDM\program\log\sdmcl20050517131312.log]/>
<!PATTERN[sdmcl20050517131312.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
May 17, 2005 6:43:12 PM Info: -
Starting deployment -
May 17, 2005 6:43:12 PM Info: Loading selected archives...
May 17, 2005 6:43:12 PM Info: Loading archive 'D:\usr\sap\DYN\DVEBMGS00\SDM\program\temp\temp50603PVTOSAP.ear'
May 17, 2005 6:43:14 PM Info: Selected archives successfully loaded.
May 17, 2005 6:43:14 PM Info: Actions per selected component:
May 17, 2005 6:43:14 PM Info: Update: Selected development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08' updates currently deployed development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.09.04.27'.
May 17, 2005 6:43:15 PM Info: Error handling strategy: OnErrorStop
May 17, 2005 6:43:15 PM Info: Update strategy: UpdateAllVersions
May 17, 2005 6:43:15 PM Info: Starting: Update: Selected development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08' updates currently deployed development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.09.04.27'.
May 17, 2005 6:43:15 PM Info: SDA to be deployed: D:\usr\sap\DYN\DVEBMGS00\SDM\root\origin\local\PVtoSAP\LOKAL\0.2005.05.17.18.37.08\temp50603PVTOSAP.ear
May 17, 2005 6:43:15 PM Info: Software type of SDA: J2EE
May 17, 2005 6:43:15 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
May 17, 2005 6:43:15 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
May 17, 2005 6:43:15 PM Error: Aborted: development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [DYNPRO] with user name: [J2EE_ADMIN]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
May 17, 2005 6:43:17 PM Error: -
At least one of the Deployments failed -Hi Abhijeet,
1. Execute the remoteGUI
<<Installed drive>>:\usr\sap\J2E\JC00\SDM\program\RemoteGui.bat
2. Click the "Connect to SDM server" (Menu "SDM GUI --> Login")
3. Give the hostname (DYNPRO) and port (50018)
4. Enter the password and click login.
Check whether you are able to login or not. If you are not able to login through the RemoteGUI, then the password might be wrong. Check the password.
Regards,
Santhosh.C -
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
Design Studio BW SSO User not authorized
Hi all,
I have problem with BW SSO integration on Design Studio. We developed dashboards on top of BW. We have users and they are only authorized to see the data for their own companies and plants. To achieve that, we created OLAP connections with SSO enabled and we have BO/BW integration. The queries work fine in Analysis OLAP.
However, we are having problems with Design Studio. Here is the problem.
1. Create a dashboard lets say with a combo box and a chart.
2. Populate the combo box with the script below:
DROPDOWN_1.setItems(DS_1.getMemberList("0COMP_CODE", MemberPresentation.INTERNAL_KEY, MemberDisplay.TEXT, 20, "ALL"));
3. In combo box, wirte the code below to filter values on chart:
DS_1.setFilter("0PLANT__0COMP_CODE", DROPDOWN_1.getSelectedValue());
4. Save it on the platform.
5. Open the dashboard on the platform with SAP user
6. By default, in combo box, "ALL" value will be selected. If the user has only authorized to see only 1 or 2 companies, then the chart give "User is not authorized" error message.
7. Select a company from combo box, the chart shows values of the selected company.
8. If the user wants to see the total of the companies authorized to see, then the chart doesn't show but the error message.
Another issue is that each company has plants. If the user wants to seel the data for all plants then he receives the "not authorized" error.
The user should be able the select "ALL" and be able to see the total of companies or plants authorized to see.
If "ALL" is selected for a company:
If a single company selected and ALL plants are selected:
If a single company and a single plant is selected:
BTW, the authorization works fine in BW and with Analysis OLAP tools. The user can see the total of the companies authorized to see.
Thanks for your help in advance.Hi Zahid - this application has more than one query, correct?
can you try if the authorization issue is occuring also when you have one query only per applications?
Reason I ask is, when using design studio, all queries are executed with merged variables and then I belive the authorisation context is different. I assume you have some special customer exit in the system for the authorisation check - and in case of design studio this can get into a point where the constellation is not authorized.
In such cases you would need to run authorisation trace (I would need to search the transaction).
Regards, Karol -
User not authorized for message processing
Hi,
I have a SM59 connection from SAP PI --> SAP R3.
Targethost sapr3T.mydomain.
Path prefix: /sap/xi/engine?type=entry
Process: From PI send a message to R3 (scenarie is a Server Proxy...)
User: PIPROXY has Role SAP_XI_APPL_SERV_USER
This is not enought I get error "User not authorized for message processing" when trying the connection from my PI server. (I tried with SAP_ALL and then it works)
What would be the right user role for this operation ?
Br,
MartinHi all,
I have the same problem in a XI -> BW scenario (Abap proxy).
I get error "User not authorized for message processing" when try to send message from PI to BW.
(I tried with SAP_ALL and then it works)
User: PI1REMOTE has Role SAP_XI_APPL_SERV_USER and SAP_XI_IS_SERV_USER
What would be the right user role for this operation ?
Thanks
Daniele -
System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED 0SAL_DS01 0S
Hello
I have a big problem, I a have active the ODS 0SAL_DS01 with the update rule 0CRM_SALES_ACT_1.
I have upload the data without problem.
When I want to see the data I have this message :
Your user master record is not sufficiently maintained for object Sales Org
System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED 0SAL_DS01 0SAL_DS01
Can someone help me please?
Regards.
FarchidHi Farchid,
You need auth for the SalesOrg Auth object that is securing this ODS. In RSSM, you can enter 0SAL_DS01 in the check for InfoProvider box and then click display. You should see a check mark against this auth object for SalesOrg. Makre sure that you have the related role assigned to your ID.
Hope this helps... -
User domain\SPFservice is not authorized to perform request using authentication type Negotiate
Hi,
I have installed WAP/SPF in the same domain via express installation. The SPF domain service account is sysadmin on the SPF database. The SPF domain service account is running as identity in IIS application pool. I have registered SPF in
WAP via SPFcomputeraccount\LocalSPFaccount. The LocalSPFaccount is member of the 4 local groups created by the SPF setup. The domain SPF service account is member of the VMM administrators.
When a new tenant want to subscribe to a hosting plan I get an error "One or more errors occurred while contacting the underlying resource providers. The operation may be partially completed. Details: Failed to create subscription".
When I look in the eventviewer of the SPF server in ManagementODataService, I can see "User domain\SPFservice is not authorized to perform request using authentication type Negotiate".
SPF/VMM are both on the latest update rollup. The VMM console is also updated on the SPF server.
I can successfully reproduce the troubleshooting steps from http://blogs.technet.com/b/privatecloud/archive/2013/11/08/troubleshooting-windows-azure-pack-spf-amp-vmm.aspx.Hi,
During the install it is also asking you to specify groups during the installation (4 x) Is the user you specified als spf runas account also member of those group in the AD?
So you have 4 groups created on the local box by the installation. But also 4 specified during the installation. Check if the account is member of those group(s) as well, reboot the spf and you should be up and running.
Best regards, Mark Scholman. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
The user admin is not authorized to make the Create Order request
Hi,
I have deployed the PiP and trying to create the order. But i am getting the below error
The user admin is not authorized to make the Create Order request>
Please note :--
I have assigned roles in administrator
I have assigned permissions in Weblogic.
ThanksHi,
Click on the user admin under user and groups , go to the tab Passwords. Give the password for the admin user and save it. Restart the server and try to login.
Regards
Marg -
RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED
Hi Gurus,
I am working on 3.5 version. Got the following error messages while trying to retrieve data from Cube.
RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED
RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_
RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GE
Data cannot be seen in the report too.
However, PSA displays the data. The request is also green.
This is related to authorizations. Can anybody help?
Points assured.
Thanks.Run Su53 and check the authorization for the user that is getting this error.
Also, check for all the obejcts in the cube, whether any of them are marked "authorization relevant". If so and if you have authorization objects created on them, and have a variable on that characteristic and if values are maintained for that variable, make sure the user who is getting this error has value in that variable.
Ravi Thothadri -
Watch ESPN - User not authorized error
I'm a U-200 subscriber, I get all of the ESPN channels on u-verse. I recently moved to Kansas City from Chicago, and since the move I haven't been able to access Watch ESPN online. I've tried from my laptop, phone and two different tablets. I just get the User Not Authorized error. Does anyone know how to fix this? I don't have time to spend an hour on hold waiting for tech support.
I'm a U-200 subscriber, I get all of the ESPN channels on u-verse, and also BTN, NBCSN, etc.. I recently upgraded from Internet U-verse only to U-200 and Internet, switching from DirecTV. Unfortunately, when I try to use TV network apps on my iPhone and iPad (like ABC, Watch ESPN, NBC Sports Live Extra, Fox, BTN2Go, etc), after selecting ATT U-verse as my participating TV provider and entering my U-verse credentials, I just get the User Not Authorized error from every single app. Does anyone know how to fix this? I don't have time to spend an hour on hold waiting for tech support, and I am about to switch back to another provider after only three days with U-verse. Examples of errors: NBC Sports Live Extra: "We're Sorry it looks like you're not a subscriber to this channel. Please contact you're provider."ABC: "Error code:400-1. Unfortunately, you cannot access this content. Please contact your TV provider for further assistance."BTN2Go: "User is not authroized to this content."Watch ESPN: "Unable to play video. You are not authorized to play this content. Please contact your provider." Can someone please help??? Talked with two techs who have basically thrown up their hands saying they cannot help. Update on 6/9: So I sent a PM to ATTU-verseCare and quickly got a response from SadathCS. He called me and noticed that when I upgraded from Internet Only Uverse, the database they use to authenticate TV subs on these apps was not properly synched after my upgrade to the TV/Internet account bundle. He forced the sync and it is now working. Thanks SadathCS! issue solved.
-
System error - User not authorized to access requested Info Object!
Hi, Experts,
I have a user ID begin with S***, but when I click some links, the following message shows:
"System error - User not authorized to access requested Info Object!"
How could I have authorization to see these links?
Thanks!
LorrieHi Lorrie,
If you are a superuser, you should not get this error.
If not, you can not change any autohorizations.
Check it out. For your job, you have to be a super user.
Thanks,
Gordon
Maybe you are looking for
-
This week xorg crashed a couple of times, I am trying to find out why but I do not know where to start looking. I am using xorg with gdm and gnome 3. It just happened again, so I gathered some data I thought might be usefull. The crash: Backtrace: [
-
Lumix DMC - FZ 200 raw support lacking. Is there a work around to access jpeg images
I'm Using Aperture 2.1.4. I Shot RAW + JPEG on a recent trip using my new Lumix DMC - FZ 200 on a 64 gb sdxc card which seems supported by OSX 10.6.8 - import seemed to be working ok. Aperture shows only thumbnail with "Unsupported image format". Fil
-
PI 7.0 SP15 to PI 7.1 EHP1
Hello, Have a few queries. 1. Firstly, I see the EHP1 getting released to customers by end of august 09? am I correct? 2. Nextly, can an upgrade from PI7 SP15 to PI 7.1 EHP1 be done directly? or there needs to be some other upgrade that needs to happ
-
Duplicated entries in BSIK using Logical Database KDF
Hello everyone, I'm using Logical Database KDF to retrieve some data, but i'm getting duplicated entries when getting to BSIK. Can anyone point out in my program what could i be doing wrong? If i put a breakpoint in the line immediatly below GET bsik
-
Hi there! I'm in need of some help with iphoto. I want to send a book that I have made directly to a person in New Zealand, however I'm with Apple UK and when I try to change my shipping info, it will not let me select another country other than the