Oralce 10g on Windwos 2008

Hello,everyone,
Can I intall the Oracle 10.2 on Windows 2008?

Yes, 10gR2 is certified for Windows 2008 and You can install it.
You can check by Yourself certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
And You should install 10.2.0.3 specifically created for Windows Server 2008. Don't use 10.2.0.1

Similar Messages

User managed backup and rman oralce 10g

hi guys
what are the enhancement of user managed backup and rman in oralce 10g
would u pls tell me in understandable manner
thanks in advance

Hi,
what are the enhancement of user managed backup and rman in oralce 10g
would u pls tell me in understandable manneRefer below link
http://dbataj.blogspot.com/2008/05/rman-versus-user-managed-backup-part-i.html
Hope helps.
Regards,
X A H E E R

Error : Oracle 10g with windows 2008

Hello Experts,
We are installing Solution manager 4.0 on windows 2008 with oracle 10g(10.0.2.0)
It shows "checking operating system version must be 5.1 or 5.2 actual 6.0.
<<<<<Failed".
If orcle 10g for windows 2008 is available on the sap marketplace, please provide us the link for that.
Please recommend any other oracle version compatible to the windows 2008 fro solution manager 4.0.
We have exiting system landscape production server on windows 2003 with oracle 10g Is it compatible with the windows 2008 with oracle 10g?
Thanks & Regards,
Abha

> Please recommend any other oracle version compatible to the windows 2008 fro solution manager 4.0.
Read
Note 1303262 - Oracle on Windows Server 2008
You have to also patch your sapinst.
Markus

Install Oracle 10g on windows 2008 Server 64bit

Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11g

You mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20

Can't install oracle 10g on windows 2008 R2

Please help me
I want install oracle 10g on windows 2008 R2 but can't install because I don't have file install oracle_10.2.0.4 and i can't download file from oracle.com
and oracle 11g i not license
Where can download file oracle install 10.2.0.4
thank you

user9357585 wrote:
same issue here. I need 10.2.0.3.0 with install software to bring a legacy sid over onto new server hardware that will not support Win 2003. I have Win 2008 32bit loaded and just need the software install ruitine to make the move. My legacy 10g server running on older hardware and Win 2003 works, but is now uncompliant with IA requirements now. We are sandboxing this application. My new server will need to have 2008 on it.
Will Oracle supply me the software. I have paid maintenace on my account every year. Just paid it for this year in Ocober. Should not have an issue here.submit a Service Request & you'll get your question answered

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Oralce 10g R1 - Ora-12541 after updating Windows 2003

Hi Experts
We are using Oralce 10g On Windows 2003. Today we have virus problem and we removed virus and did "Windows update"
Now when trying to open the sql getting error "Ora-12545"
Kindly check and help urgently.
Tx
G Selvam

Corolus G wrote:
HI
THnaks for reply,
But i did not change any parameter at allMaybe you didn't knowingly change any parameters, but you are running this on Windows. To paraphrase Forest Gump, "My momma always said Windows is like a box of chocolates. You never know what you are going to get." My team and I just finished spending three hours of troubleshooting an application when "we didn't change anything" -- except that a Windows update was pushed to the app server ....
If Oracle says "target host does not exist", I'd take Oracle's word for it.
So how do you go about chasing down ora-12541? Start with your names resolution - usually tnsnames. What is listed for the HOST= parameter of the entry in question? Is it listed as a server name or ip address? Can you ping it?
From the client machine please
1) show us the contents of your tnsnames.ora file
2) open a command prompt (cmd.exe)
3) give the command "set | sort"
4) give the command "tnsping <mysid>", where "<mysid>" is the tnsnames entry used to identify the database.
Copy all of the above - commands AND responses, and paste it back here.
Kindly check and help urgentlyWe can't check. After all it's your system. All we can do is suggest what you should check.
And there is no "urgent" here. This is a forum of peer volunteers.
"Urgent" means one of two things -
1) people are dying, or
2) you have a customer-facing, revenue-producing production system that is down.
(And to get some perspective on the second case, keep the first in mind.)
For the first, you call whatever civil emergency service seems appropriate.
For the second, you open an SR with Oracle - which requires a paid-up support contract. For them to consider your problem "urgent", you will need to demonstrate that your problem falls under item #2.
You don't have a support contract? Now you know the exact dollar figure that your company places on the data.

Oracle Forms 6i(32-bit) = Oracle database 10g R2 Windows 2008 R2 64-bit)

We have Oracle database 10g R2 installed on a Microsoft Windows 2008 R2 (64-bit) (SERVER1)
We have Oracle Forms 6i (patch 4a) installed on a Microsoft Windows XP Professional (32-bit) (SERVER2)
I am not able to connect from SERVER2 to SERVER1, either through SQLPLUS or FORMS BUILDER.
Its giving some DLL error.
Is it because forms 6i (32-bit) cannot connect to a 64-bit database on a 64-bit OS ?

There might be problems with 8i clients (like forms 6i) if the database uses AL32UTF8 characterset indeed (if you need unicode and you need to run forms 6i use UTF8 instead) but this should not be related to the platform of the database.
The platform of the database server really should not matter as the forms runtime talks via SQL*Net with the database server and in the end it does not matter if the database runs on linux, windows whatsoever or unix 32 or 64 bit for the client. The only problem you'll encounter is that SQL*Net also changes with versions and thus "older" clients might not be able to communicate with "newer" servers and vice versa.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select * from v$nls_parameters where parameter = 'NLS_CHARACTERSET';
PARAMETER                                                       |VALUE
----------------------------------------------------------------|---------------------------
NLS_CHARACTERSET                                                |WE8MSWIN1252
SQL>I just tried a 6i form (6.0.8.25.2) connected to this database. It worked ;) (again: not certified)
cheers

Oracle 10g on Windows 2008 Server Std. edition

Hi all
We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
We try to install Oracle 10g 32 Bit - We get the following problems
a) By default it should take the highest partion i.e d:\oracle\product etc.
but it takes c:\users\administrator\documnets\oracle\product which is wrong
However we correct it by typing the correct path. Brows does not take to D partition
b) On proceeding further - >Installation aborts and and we get messages
unknowkn , unknown etc. for 3-4 aspects.
Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
User connected was administrator while installation of Oracle 10g 32 Windows.
We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
Kindly suggest some remedy
Suresh Bansal

With due respect i wish to request you to please see below thread:
Re: Oracle 10g
Which is making me confused.
Regards
Girish Sharma
There's a specific version for Windows 2008 (10.2.0.4), ready to download:
http://www.oracle.com/technology/software/products/database/index.html Reply by Werner

How to install Mini SAP using Oralce 10g Express Edition!

Hi Guys,
I am fresher in SAP and I want to install Mini SAP on my home desk-top for practicing ABAP, I will be grateful if anybody send`s me links for step-by-step installation guide and another question is, it is to install Mini SAP using Oracle 10g Express Edition?
Early response would be highly appreciated
Thanks in advance,
Reetesh
Edited by: Reetesh Tiwary on Jan 31, 2008 8:59 AM

Dear Andreas,
Thanks for your response!
SAPDB is in-built or I will have to install it seperately, If I will have to install it seperately from where I will get either of these maxdb or sapdb?
Thanks,
Reetesh

OID 10g and AD 2008

Hello,
We are facing a dilema and I am hoping someone else has gone through this and could offer a suggestion.
We use OID 10g as part of our single sign on that authenticates our Oracle apps 11i based app with AD 2003 currently, using DIP. The plan is to upgrade AD 2003 to AD 2008. However, from what I understand we need to upgrade our OID to 11g. Our dilema is that this would force an upgrade of another large system at the same time, which I am hoping avoid and am hoping to buy us some time to upgrade to OID 11g a little further down the road when we have more bandwidth to handle.
I came across an article that talks about a work around that I am hoping could help us short term.
The article is here http://mjohal.wordpress.com/2009/12/24/integrating-oracle-apps-11i-with-ms-ad-2008/
But the part I am hoping someone could shed some light on is this below portion from the article in the link above.
[So, as OID 11g is not yet certified with Oracle Apps 11i, integration deployments with Oracle Apps 11i/OID 10g cannot be integrated with MS AD 2008.
Well, there is a way around to achieve this. However, that will involve introduction of additional component I.e. Oracle Identity Manager (OIM), a component of Oracle Identity Management Suite, provides a identity provisioning solution for Oracle and non-Oracle products. Oracle Identity Manager is certified to use with Oracle Internet Directory 10g and MS Active Directory 2008.
Oracle Identity Manager provides connectors for OID 10g and MS AD 2008, which allows users created in MS AD 2008 to be reconciled into OIM, which in turn will propogate user information to OID. In turn, OID will propagate those changes to Oracle Apps 11i FND_USER table.]
What I need others help with is, Is this indeed possible? Has anyone else done this? If not, what options do we have with working with AD 2008.
Thank you,
MarkP

>
>
[So, as OID 11g is not yet certified with Oracle Apps 11i, integration deployments with Oracle Apps 11i/OID 10g cannot be integrated with MS AD 2008.
http://blogs.oracle.com/stevenChan/2009/12/oid_11g_ebs.html

Oracle 10g and Windows 2008

I'm trying to install Oracle 10g x86 on Windows 2008 x64. Installation crashes in the beginning with the next error message:
Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle Support:
"Unknown"
"Unknown"
"Unknown"
Any objections?

What do you mean when you say "I'm trying to install Oracle 10g x86 on Windows 2008 x64" You are trying to install an x86 Oracle edition on a 64 bit OS. This is not certified yet. In fact if you take a look at the certify matrix you will find that the 64 bit platform is not certified yet, but it is planned for this year.
The only available edition so far for Win2008 is x86. Patience is advisable.
~ Madrid
http://hrivera99.blogspot.com

Error in installing oralce 10g in AIX 6.1

Hi , i tried to install oracle 10g in AIX 6.1(p) (64 bit ) but got the following error . Please help me?
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' before
you proceed with Oracle installation. rootpre.sh can be found at the top level
of the CD or the stage area.
SKIP_ROOTPRE environment variable is set, which means
rootpre.sh was already run as root.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5200
Failed <<<<

Hi,
based on 169706.1 (Modified: 06-MAY-2009) 10.2.0.4 and 11.1 are so far supported on AIX 6.1. Therefore when you install 10.2.0.1 this error is raised because at that time when Oracle 10g R2 was released AIX 6.1 was not available. You should however be able to install the software unsing:
./runInstaller -ignoreSysPrereqsInstall first only the software 10.2.0.1. Then patch it to 10.2.0.4 and afterwards run:
$ORACLE_HOME/bin/dbcaCheers,
David
OCP 9i
http://www.oratoolkit.ch/otn.php

How to run oralce 10g forms in runtime

hi all
I have an application developed in oracle 10g forms , wheni fun it opens in browser , how can i restrict my fmx to run in browser , as i dont want to run it in browser like forms 6i .
Regards
nawaz

Hi nawaz
From the menu design time:
1- select >Edit>Preferences>select the Runtime tab
and close to the field of web browser location - >
Select the Browse button to locate the IE location on ur hard-disk.
2- Run ur main form >Select Favorites >Select add to Favorites.
Then ,u have a link 2 ur application , u can drag and drop it in ur desk top.
or use the existing link.
or if u wanna run a specific form locally then, u have to run the Start OC4J Instance to be intiallized ,and when finished working on that form run the End OC4J Instance to be terminated.
Hope this helps,
Regards,
Abdetu..

OEM in Oralce 10g

Hi All,
I have installed oracle 10g on HP-UX 11.23 Itanium server. After installation i had created two databases with different OS Users. Out of them two OEM for one database is working but for another database OEM is not working.
So please guide me to start OEM for another database.
Regards,
Nirav Patel

Hi,
did you try this question on the database forum ?
Frank

Oralce 10g on Windwos 2008

Similar Messages

Maybe you are looking for