Oralce Names Server problem

ENV:
system: Win2000Server
DB: Oracle817
Problem desc:
I have configed my Oracle Names Server,and uses Namesctl to test
it,the results show it works well.But I get these error message
when I use sqlplus(through ONAMES) in my client:
ERROR:
ORA-12637: Packet receive failed
help me!Thank you!
Regards
zoe

Similar Messages

Photoshop CS2: name server problem: Is there a solution?

Hi!
I have Photoshop CS2. I can't start the program anymore because of the already well known name server problem... (DEAR ADOBE!! HOW COULD YOU!!! )
Now, what can I do? As far as I know I purchased the software for an unlimited amount of time (thanks to the fact that there weren't any clouds, halleluja!)
Can anybody help me, please? Is there a way "around"?
Thanks a lot!!!
Christiane

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Name server problem on install

Hello,
just wondering if anyone can help - haven't had too much (very little) experience with solaris (or unix for that matter).
When installing Solaris 10 from cd (sparc) I get to the 'Confirm Information' screen, click confirm and it comes back with an error stating that 'The Name Server information entered is incorrect'.
The problem is that the NS's I entered are exactly the same as the NS's on my windows machine - also hooked up to the same router.
If I accept the supposed incorrect settings and continue the install everything completes ok - except the system can't resolve names. Here's the really strang bit - I can do an nslookup of www.google.com no problem (returning from the first NS entered) but can't do a lookup of anything else.
The DNS's are external to my network (supplied by ISP) and the connection is ADSL.
Other options set in setup : DHCP - no (Static public subnetted IP), Kerberos - no, Search Domain : none, Route :specified, ipv6 - no.
(during setup)The Solaris Install Console shows:
Completing system identification...
runCmd error in /usr/sbin/sysidput with output:
Unable to run cmd: /usr/sbin/sysidput
Any help would be much appreciated. (and apologies if this is something I should have picked up on in the docs - I did read as much as I could and I have searched the net for an answer to this)(I have also posted this on the install forum, but got no replies)
Gar

You should provide a bit more info on how your network is setup. How are you connected to the ADSL? Does your router have DHCP?
The DNS information you fill in during install is not ment for external DNS servers it's your local networks DNS server.
It is used to verify that the hostname you entered exists in the network/domain.
You could of course fill in external dns servers, but you'd allways end up with a 'can't resolv'. Simply because YOUR hostname does not excist on the external DNS server.
As Codename47 suggests, try not filling in a dns server. (use the hosts file instead)
Just an extra tip that appearantly some don't seems to know:
you don't have to reinstall to get it sorted. The command 'sys-unconfig' will force a reboot and guide you through the exact same configuration menu you had during install. Updating all locale, X and network settings along the way.
The nice thing is you can do it over again till you get it right and fully understand what it all means and changes.

Net8: Names server problem

Does anyone know how to set up an Oracle Names server properly. I realize that there are two methods , one using cache replication and the other a dedicated database for name resolution. Anyway, when use the GUI tools to create a Names server, I notice that (on NT) that a service is created and it has a registry entry pointed to a file called Names.exe. However, there is no file called Names.exe on my system.
[email protected]
Help, please !

up

Problem with SCs that created before the Name Server was configured

Hello,
I have created an SC and developed it.
When I created it, the Name Server wasn't configured and because of that, when I created new DC for this SC I needed to write the vendor manually. Lets assume I wrote example.org.
Sometime after I did configured the Name Server and I reserved example.org as a namespace prefix.
When I create new SC and new DCs in it everything is OK: Instead of writing example.org as my vendor I can choose from a combo box between sap.com and my own which is example.org.
The problem arises with the SC that has been developed before the Name server was configured: If I create new DC for it the vendor is shaded with sap.com inside with no option to change it, even though the previous DCs for this SC were created under the vendor example.org (which I entered manually).
I assume I can (with a lot of manual work) create new SC and move the DCs (or only their code) to the newly created SC, where I have the option to choose, but I am looking for more simpler solution. For example, changing a certain configuration file at the SC or so.
Anyone has an idea?
Thank you in advance,
Roy

Anyone...?

Problem of "NAME SERVER"

Hello
I've find a problem during deploy of applicationi in Netweaver Developer Studio.
I've build a new Dictionary project.
I've buil a new table with some rows into this project.
I've deploy dictionary project.
I've send my dictionary project on DTR and another user have take this project making "CREATE PROJECT".
Now this user have my porject in local.
The problem born when this second user try to modify the table. When this user add a new row, for example,an error is visualized. this error say that "CAN'T FIND NAME SERVER".
What is name server ??? why this error born only if anoter user try to modify my table ????
I can see that this problem born after that I've send the dictionary project on DTR..... why ????
thank you very much
Stefano

Hi Stephano,
after you configure the SLD to be your name server, you then need to configure you DTR so that it will use that name server.
To do this you go to this URL of your DTR:
http://<host>:<httpPort>/dtr/system-tools/administration/NameServerConfiguration
On this page, just enter in the URL to the server that runs the SLD: http://<host>:<httpPort>/
And then add the user name and password to access this system.
Hope this helps!
Cheers,
Jeff

Problem in setting up Names Server

I have done all the things for setting up Names Server using wizard of Net Assistant. I am using Oracle9i. My service of Names Server is not starting. It gives error which something about blocking.
I am not using region database and its first Name Server in my network.
The error messages are TNS-00506, TNS-12536
Please help.

You have to start the services in the Server and Clients of the following way :
Server
namesctl
namesctl> START
Client
namesctl
namesctl> START_CLIENT_CACHE
Joel P�rez

DNS timeout and Name Server timeout between two DC's

Hi All
My clients have a brand new domain built for them, with two domain controllers at separate sites, and one site is having some issues.
At one site (where DC2 is hosted), all users are having 5-10 minute log on delays - once in everything is running without issues. Site where DC1 is has zero issues - they run smoothly, get a nice quick login etc. All users are using redirected folders and
all have the same GPO's applying to them.
DC1 also has periodic issues communicating with DC2 - nslookup using DC2 gives "DNS request timed out. timeout was 2 seconds" on external AND internal queries, but then 5 minutes later will resolve perfectly. During the "DNS time out"
period, trying to resolve DC2 as a Name Server also gives the error "A timeout occurred during validation".
Not sure if these (slow logon and DNS/NameServer time out issues) issues are related but I am at a loss.
Reverse lookup zones are fully created and populated, entries aren't randomly deleting themselves. Replication between both DC's is working fine, no errors and SYSVOL/NETLOGON are sharing fine from both DC's. Occassionally restarting the DNS server services
on both servers will kick them back into talking - but only for around 30sec-1minute, after that they communicate periodically without problems and spend the rest of the time not resolving.
Any ideas floating around, as I am at a loss here. We haven't been able to join more than a few test users to DC2's site for fear of them all calling every day due to long log on periods.

Hi,
Are you pointing each DC/DNS to the other one as primary dns in tcp/ip properties? Can you post a dcdiag /a /f:dcdiag.log from the DC2?
Any warnings/errors in Application log on the client(s) facing issues after they get logged in ? Can you also confirm that users from site with DC2 are having DC at : set | find /I "LOGONSERVER" output?
Hope it helps.
Regards,
Calin
Hi Calin
The DC's were originally pointing at each other for the primary but others prior to posting here suggested that was not best practice anymore and said they should be the other way around - in any case, either direction doesn't resolve the issues.
The only application error the users are getting is :
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
The winlogon notification subscriber <GPClient> took 84 second(s) to handle the notification event (Logon)
DCDIAG of DC2 :
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = CAB1-DC-V01
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: AUS\NDC1-DC-V01
Starting test: Connectivity
......................... NDC1-DC-V01 passed test Connectivity
Testing server: AUS\CAB1-DC-V01
Starting test: Connectivity
......................... CAB1-DC-V01 passed test Connectivity
Doing primary tests
Testing server: AUS\NDC1-DC-V01
Starting test: Advertising
......................... NDC1-DC-V01 passed test Advertising
Starting test: FrsEvent
......................... NDC1-DC-V01 passed test FrsEvent
Starting test: DFSREvent
......................... NDC1-DC-V01 passed test DFSREvent
Starting test: SysVolCheck
......................... NDC1-DC-V01 passed test SysVolCheck
Starting test: KccEvent
......................... NDC1-DC-V01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... NDC1-DC-V01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... NDC1-DC-V01 passed test MachineAccount
Starting test: NCSecDesc
......................... NDC1-DC-V01 passed test NCSecDesc
Starting test: NetLogons
......................... NDC1-DC-V01 passed test NetLogons
Starting test: ObjectsReplicated
......................... NDC1-DC-V01 passed test ObjectsReplicated
Starting test: Replications
......................... NDC1-DC-V01 passed test Replications
Starting test: RidManager
......................... NDC1-DC-V01 passed test RidManager
Starting test: Services
......................... NDC1-DC-V01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
......................... NDC1-DC-V01 failed test SystemLog
Starting test: VerifyReferences
......................... NDC1-DC-V01 passed test VerifyReferences
Testing server: AUS\CAB1-DC-V01
Starting test: Advertising
......................... CAB1-DC-V01 passed test Advertising
Starting test: FrsEvent
......................... CAB1-DC-V01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... CAB1-DC-V01 passed test DFSREvent
Starting test: SysVolCheck
......................... CAB1-DC-V01 passed test SysVolCheck
Starting test: KccEvent
......................... CAB1-DC-V01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... CAB1-DC-V01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... CAB1-DC-V01 passed test MachineAccount
Starting test: NCSecDesc
......................... CAB1-DC-V01 passed test NCSecDesc
Starting test: NetLogons
......................... CAB1-DC-V01 passed test NetLogons
Starting test: ObjectsReplicated
......................... CAB1-DC-V01 passed test ObjectsReplicated
Starting test: Replications
......................... CAB1-DC-V01 passed test Replications
Starting test: RidManager
......................... CAB1-DC-V01 passed test RidManager
Starting test: Services
......................... CAB1-DC-V01 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:30:22
Event String:
DCOM was unable to communicate with the computer 139.130.4.4 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:30:43
Event String:
DCOM was unable to communicate with the computer 203.50.2.71 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:31:05
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:31:27
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
......................... CAB1-DC-V01 failed test SystemLog
Starting test: VerifyReferences
......................... CAB1-DC-V01 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : aus
Starting test: CheckSDRefDom
......................... aus passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... aus passed test CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running enterprise tests on : swms.com
Starting test: LocatorCheck
......................... swms.com passed test LocatorCheck
Starting test: Intersite
Doing intersite inbound replication test on site AUS:
......................... swms.com passed test Intersite
SYSVOL is sharing OK, these errors are occurring when DC1 is performing backups and comes good a few seconds later)
The DNS failures are not on the NIC of each server they are the forwarders for the server, not sure why they are failing as DNS lookup is running fine and the IP's are resolving correctly within the forwarders.
set | find /I "LOGONSERVER"
C:\Users\Christopher.McCartne>set | find /I "LOGONSERVER"
LOGONSERVER=\\NDC1-DC-V01
NDC1 = DC1
CAB1 = DC2
The users are logging onto NDC1 currently as I did switch around their DNS servers to have DC1 as their primary to test if this resolved the logon times. It didn't so I've switched them back and will re-run the check to see which server is the logonserver.

Flat file connection: The file name "\server\share\path\file.txt" specified in the connection was not valid

I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid.
It appears that the problem is with the rights of the user that's running the package (it's a proxy account). If I use a higher-privelege account (domain admin) to run the package it completes successfully. But this is not a long-term solution, and I can't
see a reason why the user doesn't have rights to the file. The effective permissions of the file and parent folder both give the user full control. The user has full control over the share as well. The user can access the file (copy, etc) outside the SSIS
package.
Running the package manually via DTExec gives me the same error - I've tried 32 and 64bit versions with the same result. But running as a domain admin works correctly every time.
I feel like I've been beating my head against a brick wall on this one... Is there some sort of magic permissions, file or otherwise, that are required to use a flat file target in an SSIS package?

Hi Rossco150,
I have tried to reproduce the issue in my test environment (Windows Server 2012 R2 + SQL Server 2008 R2), however, everything goes well with the permission settings as you mentioned. In my test, the permissions of the folders are set as follows:
\\ServerName\Temp --- Read
\\ServerName\Temp\Source --- No access
\\ServerName\Temp\Source\Flat Files --- Full control
I suspect that your permission settings on the folders are not absolutely as you said above. Could you double check the permission settings on each level of the folder hierarchy? In addition, check the “Execute as user” information from job history to make
sure the job was running in the proxy security context indeed. Which version of SSIS are you using? If possible, I suggest that you install the latest Service Pack for you SQL Server or even install the latest CU patch.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

JDBC Thin driver and Oracle names server

Hi
Any managed to get the Thin driver to user the Names Server aliases, ie I want to connect to service xxx like
jdbc:oracle:thin:@xxxx and not specify instance and port as the DB is running in a multiple machine cluster and can be switched to a different machine...
With OCI driver I have managed on NT but having problem with OCI/Linux and Beta 10g...
Tks
Andre

I don't have much experience with OCI from JDBC, but should work like any other kind of connection via SQL*Net. I.e. I would check if connection can be made using SQLPlus, check environment variables (ORACLE_HOME etc.) of 9iAS instance, check version of JDBC classes and their readme.txt. There are also some settings in sqlnet.ora file which might affect this (like default domain - try to use full name of alias - OCRL.WORLD or whatever alias you have there). You may also want to switch tracing for SQLNet and/or listener on (it's not easy to find in doc how to do it, though) to check if there is at least some traffic between klient and server...
Myrra

Name-server importing wrong url?

Dear experts,
I am trying to import a track from NWDI so I can add development components to a software component in the track. The problem I am having is:
I keep getting this error " Syntax of 'nibco.com/nbdc/nibcotst' is not valid : Invalid name: appropriate prefix not found; choose another name or another name server". We haven't had this problem in the past...When I go to CMS->Landscape Configurator and click on display development configuration button I get this configuration:
The url for name-server-url property is correct: http://xxxxxxxx:xxxxx/sld/cimom
But when I import to NWDS the url get's changed:
One NWDS:
Another NWDS:
For some reason it is changing the naming server url on import to http://xxxxxx:xxxxx/sld/name and http://xxxxxxxx:xxxxx/sld. Any help is much appreciated.
Thanks,
Bradley Sorensen

Hi Bradley,
I did not fully read this conversation, but this is how it works in general.
1. Name server is changed in SLD.
2. Track "in CMS' webui -- Landscape Configurator" has to be re-saved in order to have the change reflected there (this is what you have done so far)
3. NWDS development config has to be re-imported on client side. Otherwise it'll consider the old configuration, since after the first sync it creates a local file called ".confdef" and works from that one.
So as a hint: if you have no open activities in your devconfig, you can even delete it from your NWDS and import it again that makes sure it uses the updated devconfig .
There is also an "Update Development Configuration" option in the context menu of the Development Config in your NWDS, but if that would not work give it a try re-importing the development config eventually in a new NWDS workspace.
I hope this helps.
Cheers,
Ervin

Name server not updated in development configuration after change of SLD

Hi Guys
Hope you can help me with this one.
We have moved our SLD from one server to another.
After this we changed the name server in NWDI and in NWDS.
In NWDS i removed the development configuration and reimported it, but when I do this, a popup box shows the details of the development configuration and the name server is still the old SLD server. This means that when I start the NWDS I get an error saying that the name server host is unreachable.
Where do I change this?
I found out that the name server is setup in the .confdef file under .dtc\0 in the field called name-server-url. If I change this manually in the file, it works. But if I remove the development configuration and reimport it again, I am taken back to the old name server again.
It seems as if something has to be changed in NWDI, but I can't figure out what.
Can anybody help?
Cheers,
Jacob Vennervald

Hi Jacob,
I would proceed as follows: 
- login to your new SLD 
- go to the technical systems in the landscape area of the SLD 
- in the filter drop down select AS JAVA 
- check if your NWDI has reported to this SLD in the last 12 or 24 hours, you can check this on the "last update" column 
- if your system has reported to this sld the last few hours this is good if not go to the step "change J2ee to new sld" i will descirbe later. 
- remember the name of the system here. it is like sid on dbhostname. 
- got to sld administration (link on top) choose content maintenace in administration 
- in the subset filter select "All with instances" as class set SAP AS JAVA Cluster 
- you should find your system there. click on it. 
- in the new screen find a link in the middle top <nr> associated instances -> click it 
- in the next screen you will see the relationship of the technical system to the rest of the sld data. 
- there should be a topic called "hosted application server" 
- the should be an entry like: system landscape directory: sld on sid on server -> click it 
- here you will see the data for this hosted system. You can find the cim/url definig the SLD you will find the roles. Landscape and name server should assigend and so on here you can chage the SLD url. 
You can although proceed as follows. This as well requieres you nwdi to report and use this sld in j2ee see below if not. 
- on sld startscreen choose landscapes in the landscapes part of sld 
- select landscape type nwdi systems 
- if there is no landscape you can create one 
- in the landscape ypu can assinge systems. The sld should be availabel to choose. 
- once in the landscape you can view the system and you can change the CIM Server url and the roles there aswell its just another view on the content. 
 
you can although check: 
- open name reservation from develpoment part of start screen 
- here you should find a button about enabling or disabling the sld for nwdi usege. this should be of course enabled... 
 
"change J2ee to new sld" Ok and here what to do or to check if you are not sure if your NWDI uses/reports to the new sld. 
- Go to the nwdi server an open Visual admin i asume you are running a 7.0 Di if not let me knoe i can although tell you for CE. 
- ok in VA. select on of your server nodes->services->SLD data supplier. 
- an overview page will show up. 
- select the http settings tab in the lower middle. 
- https settings will tell the j2ee where to report to. Verify the data and change if needed. use the lightinigbolt button on top to transfer data to the sld. have a little patiance if your data is not shown immediately in your sld,. it may take 1-2 minutes until it is shown in the gui. 
- switch to cim client generation tab. those paraemters will tell your j2ee from what sld to read data from. It is important to understand that you may report to one sld but to read from antioher. depending on your sld landscape. The CIm CLient should use the same Sld as your NWDI uses in CMS setting. 
- if all is setup. do a cim client test. 
 
Allright. This is all I know on how the NWDI is integrated in SLD. Hope you can resolve your problem wiht this steps.
 
Have a good time 
Jan

Asynchronous reserve finally failed: missing name server configuration

Hi,
can anybody give me a hint why we get these errors?
"asynchronous reserveFinally failed: missing name server configuration, no logon known -> operation will be retried name reservation : name server=http://sapcoe01.bbn.hp.com:50000/, category=SAP_DevelopmentComponentName, name=hp.com/appl/tax, reservationKey=63415681, state=FINALIZE_PENDING"
The development objects are listed in SLD with status PRERES. The Name Server location is configured in DTR with the logon data. The name server is also listed in the development configuration.
Where else could be the cause for this error?
Many thanks for any hints!

Hi Martin,
Here you can see the *_PENDING items: http://<host>:50000/dtr/sysconfig/support/NameReservationList
And here you can configure the name server: http://<host>:50000/dtr/system-tools/administration/NameServerConfiguration
The solution is to define your name server a second time with a slightly different URL. The first entry you already defined probably uses the fully qualified hostname, e.g. http://<host>.mycompany.com:50000/sld/cimom. Define the same name server again but without the domain and without the /sld/cimom path, e.g. http://<host>:50000/. Actually it should correspond to what's shown in the error message, e.g. "operation will be retried name reservation : name server=http://<host>:50000/,". When you click Save Configuration, the pending items in the queue will be processed. The only problem we have left is that "after some time" the 2nd entry we just defined dissapears and we need to configure it again (and again and again...)
Kind regards,
Sigiswald

Role Name Server defined in SLD but no CimomURL maintained

Hello gurus!
We have a problem with our NWDI setup.
What I want to do is to update an existing track DFODEV02 with the software package EP-RUNTIME.
I synchronize with the SLD. However when I try to save, I get the following error:
"SLD (URL http://<NWDI_server>:<port>)
server exception: Invalid Name Server null - Check SLD configuration -> Role
Name Server defined in SLD but no CimomURL maintained."
I am not familiar with the customizing for this but I have looked into a couple of customizing steps related to Data Supplier:
1) Under administration on SLD I see the following:
Update Namespaces is marked as sld/active; but
Update Other SLDs is an empty list.
2) From the configuration on NWA:
Target URL: <RuntimeSLD_server>/sld/ds
Both 'Automatic send' and 'success' are both "true".
Hope that you can guide us on the right “track”
In advance, thank you very much!
Best regards,
Elias

Hi Elias,
1) Under administration on SLD I see the following:
Update Namespaces is marked as sld/active; but
Update Other SLDs is an empty list.
This is something else, your error message is not about this one.
What you need to make sure is that you have a name server defined.
You can check it in various ways:
A). go to CMS -- Track Data -- select the track in question -- tab Build Variants -- Display/Download the Development Configuration --> This will be an XML file. If you see a tag "sld-nameserver" then you are ok, however I assume this tag is missing or points to a wrong SLD in your case.
B)
Go to the initial page of the SLD.
2. Choose Landscapes.
3. Choose New Landscape…
4. In the page that appears, select the landscape type NWDI System.
5. Specify NWDI as the name of the landscape. Choose Create.
The new landscape is displayed.
6. Select the new landscape.
You see the details about the landscape.
7. Choose Systems and then choose Add System to Landscape.
8. Choose the hosted system type System Landscape Directory. Choose OK.
You see the installed SLD.
9. Select the SLD.
The details view appears.
10. Select the roles Landscape Server and Name Server and save your changes.
The name server is now known to the NWDI and can be used there. Only now can you create valid development configurations.
Could you please confirm this way whether you have a name server specified and that points to the correct SLD ?
I hope this guides you to the right "track"
Regards,
Ervin

Oralce Names Server problem

Similar Messages

Maybe you are looking for