Orange arrow in general ledger

Hi!
Since few time, one of our customers meets an error when it uses the general ledger.
In fact, when the customer uses the arrow near the Doc.No.(the numero of the document) the link is not good.
So all links where document is an invoice open the same invoice, all links where document is a journal entry open the same journal entry.... it's the same thing for all types of documents.
Thank for your help.
Best regards,
Séverine

Hi Séverine,
Could you provide the version and patch level details.
Also, refer to SAP Note :1056094
Regards,
Vijay kumar
SAP Business One Forums Team

Similar Messages

How to list Financial documents in General Ledger View

Dear Sir,
The Financial Document posted during MIRO does not show profit-center against the line item pertaining to Vendor Credit GL ( in Tcode FB03) . However when we click on "General Ledger View" then Profit-Center gets reflected against all Line Items of the document .
We want to display multiple Financial documents with Profit Center , pl guide us as how can we do it .
We assure to give full points for the suggested solution pl .
With Rhanks and Rgds
B Mittal

Hi,
1 - Enter transaction FBL1N
2 - Ctrl + F8 to change layout
3 - Check "find" and search "Profit Center"
4 - Press left-right arrow and confirm.
Regards

Orange arrow link doesn't work in Sales Order details window, Win2003 only

Here is a weird one, I did some searching around and I couldn't see that anyone had asked about anything like this before.
In Windows Server 2003 when our add-on is running the orange arrow linking back to the Customer window from the Sales Order window does not work. If you click it, nothing happens.
<br><br>
<img src="http://6stringsamurai.brinkster.net/sapproblem.gif">
<br><br>
It's odd, it works on every other version of Windows. I didn't even think our code could change that.
Any ideas? Thanks!

My machine where this is being tested is using Service Pack 1 Patch Level 12. The customer is running Patch 11. I was able to recreate the problem on our machine using the SAP sample OEC Computers database.
Our add-on does not add any functionality to the Sales Order Window, I traced through some things this morning and I found that we do capture events from the Sales Order Window but clicking the orange arrow does not trigger any actual functionality
It checks out what form the event is from:
If (pVal.FormType = SAP_DELIVERY_FORM) Or _
       (pVal.FormType = SAP_QUOTATION_FORM) Or _
       (pVal.FormType = SAP_ORDER_FORM) Then
Then it checks the event against some conditions, all of which are false.
Like these ones and a few others
If m_oForm.Type = SAP_DELIVERY_FORM And pVal.ItemUID = BTN_AUTOPACK And pVal.EventType = et_CLICK And pVal.Before_Action = False Then
   ' Do some stuff
If (pVal.EventType = et_FORM_LOAD) And (pVal.Before_Action = False) Then
   ' Do some stuff
All of those statements are false in this case, they relate to other forms and general things to do when forms load and close.
I've traced this on a machine where the link works and the Windows Server 2003 machine where it does not and it behaves the same way on both. The only difference is, when it exits the sub that filters through those if statements, on Windows Server 2003 the customer window does not come up and everywhere else it does. Strange.
Thanks for taking a look at this, I really appreciate it!

Business One C# DI API's for General Ledger Report?

I am working on the General Ledger Report and unable to find the DI API's for C# for the following cases. If somebody can point me the API's, that would be really helpful. I have handle to the logged in company.
Get all ChartOfAccounts
Get AccountSegmentations
Get BusinessPartners
Get JournalEntries_lines
I am new to SAP. The documentation is bit unclear. I am using the following code to load the objects. Now it is unclear how to loop through the journalvouchers to load all the lines one by one.
SAPbobsCOM.AccountSegmentations segmentations = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oAccountSegmentations);
            SAPbobsCOM.AccountSegmentationCategories categories = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oAccountSegmentationCategories);
            SAPbobsCOM.BusinessPartners partners = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oBusinessPartners);
            SAPbobsCOM.JournalVouchers vouchers = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalVouchers);
            SAPbobsCOM.JournalEntries jEntries = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalEntries);
            SAPbobsCOM.JournalEntries_Lines jLines;

Hi,
Are you trying to run the report via code? If so, you can only do that using the UI objects as there is not DIAPI for reporting.
You first need to activate the menu item for the report:
connect.SboApp.ActivateMenuItem("13058");
Once you've done that, you can get the active form which will be your criteria window, use the UIAPI to set your criteria and run the report by getting the OK button object and calling the Click method.
David

General Ledger Accounting (New): Line Items of the Leading Ledger

Hello Guys,
We are planning to implement
General Ledger Accounting (New): Line Items of the Leading Ledger
0FI_GL_14
We are in ECC6 sap_appl 6.00 and BI 7.0 SP 14, BI Content 7.3 level 4.0
The new GL line item is available
Financial Accounting: General Ledger Accounting (FI-GL)
Available as of Release - SAP Enhancement Package 3 for SAP ERP 6.0
Shipment - SAP NetWeaver 7.0 BI Content Add-On 3 Support Package 08
Content Versions- 1.0; 703
Just we have to install SAP NetWeaver 7.0 BI Content Add-On 3 Support Package 08 and on ECC side SAP Enhancement package 3 for ERP 6.0 --. Financial accounting - SAP APPL 603.
Is it correct. Can you please confirm.
Thanks
Senthil

Hello Senthil,
Yes, thats engough, since SAP is recommending the same for that datasource 0FI_GL_14. I think you are already in that version.
See this SAP help document
[DataSource Transactional Data: 0FI_GL_14|http://help.sap.com/saphelp_nw04s/helpdata/en/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/content.htm]
Thanks
Chandran

General Ledger Accounting (New): Line Items 0FIGL_O14 Performace issue

Dear Forum,
We are facing a performance issue while loading the data to 0FIGL_O14 General Ledger Accounting (New): Line Items from CUBE ZMMPRC01 -> ODSO 0FIGL_O14 DSO.
Please see my requirement below for updating the data to 0FIGL_O14 DSO.
This report is generated to display Dry Dock and Running Repair expenses for the particular Purchase orders with respective G/L's.
1) The G/L DSO will provide us the 0DEBIT_LC and    0DEB_CRE_DC Foreign currency amount with signs (+/-) amounts and.
2) ZMMPRC01 Cube   will provide us the 0ORDER_VALUE (Purchse order value)and    0INVCD_AMNT Invoice amount.
While we are loading the data from CUBE ZMMPRC01 -> ODSO 0FIGL_O14 DSO ,we have created nearly 19 InfoObject level routine to derive the below mentioned fields data for MM Purchase Order related records.
0CHRT_ACCTS    Chart of accounts
0ITEM_NUM      Number of line item within accounting documen
0AC_DOC_NO     Accounting document number
0GL_ACCOUNT    G/L Account
0COMP_CODE     Company code
0COSTCENTER    Cost Center
0CO_AREA       Controlling area
0COSTELMNT     Cost Element
0SEGMENT       Segment for Segmental Reporting
0BUS_AREA      Business area
0FUNC_AREA     Functional area
0AC_DOC_NR     Document Number (General Ledger View)
0AC_DOC_TYP    Document type
0POST_KEY      Posting key
0PSTNG_DATE    Posting date in the document
0DOC_CURRCY    Document currency
0LOC_CURTP2    Currency Type of Second Local Currency
0CALQUART1     Quarter
0CALYEAR       Calendar year
For reference Please see the below logic to derive the data for PO related record.
DATA:
      MONITOR_REC    TYPE rsmonitor.
$$ begin of routine - insert your code only below this line        -
    ... "insert your code here
    types : begin of ty_FIGL,
                CHRT_ACCTS type /BI0/OICHRT_ACCTS,
                ITEM_NUM type /BI0/OIITEM_NUM,
                AC_DOC_NO type /BI0/OIAC_DOC_NO,
                GL_ACCOUNT type /BI0/OIGL_ACCOUNT,
            end of ty_FIGL.
    data :it_figl type STANDARD TABLE OF ty_figl,
          wa_figl type ty_figl.
    SELECT single CHRT_ACCTS
                    ITEM_NUM
                    AC_DOC_NO
                    GL_ACCOUNT from /BI0/AFIGL_O1400
                      into wa_figl
                      where DOC_NUM = SOURCE_FIELDS-DOC_NUM and
                            DOC_ITEM = SOURCE_FIELDS-DOC_ITEM and
                            /BIC/Z_PCODE = SOURCE_FIELDS-/BIC/Z_PCODE
                            and
                            /BIC/Z_VOY_NO = SOURCE_FIELDS-/BIC/Z_VOY_NO
                            and
                            FISCYEAR = SOURCE_FIELDS-FISCYEAR.
    if sy-subrc = 0.
      RESULT = wa_figl-AC_DOC_NO.
    ENDIF.
    clear wa_figl.
Please note the same kind of logic is applied for all the above mentioned fields.
Here is my concerns and issue.
For the all above all routines i am referring BI0/AFIGL_O1400
DSO and finally loading to the Same DSO(BI0/AFIGL_O1400
The worried part is my DSO 0FIGL_O1400 is currecnly having nearly 60 Lacks records and MM cube is having nearly 55 requests which are required to update to the Above DSO for PO related PO value and Invoice amount.
The big issue here is while uploading data from MM cube to DSO say for example if the request is having 25,000 records from this nearly 500-600 records will be updated to DSO.
But here it is taking huge time ( nearly 3 days for request ) for updating these records , like this i have to pull 50 more requests from Cube to DSO as per the requirement.
Please note as of now i haven't created any indexes on DSO to improve this loads.
Please note am facing this issue in Production environment and need your help ASAP.
Thanks & Regards,
Srinivas Padugula

Hi,
If selecting data from 0FIGL_O14 is taking long time then you can create secondary indexes on DSO.
0FIGL_O14 would be huge as data volume directly corresponds to data volume in BSEG.
But for you requirement, I think what you can do is,
1. create multiprovider on top of DSO and Cube and create Bex report to give you the fields requried from both the infoproviders, you can then use open hub or APD approach to keep the data in the staging table or direct update DSO and then load the data to the DSO
2. Create secondary indexes on DSO so that fetching would be faster.
3. Do the enhancment at R/3 level to fetch fields from MM during load of G/L
Regards,
Pravin Karkhanis.

New user just for entering JE and General Ledger

hello experts,
I created a user, just to enter few of the Journal Enteries and General Ledgers. I gave the rights for JE and also Financial reports but when I open the "G/L account and Business Partner" Report in Financial Report > Accounting, it open the initial parameter window but all Blank I mean no field in it but just OK and Cancel Button.
Also when I open the next report "General Ledger" Report in the initial parameter window. It does not show the Business Partner or Account Selection field on the top of this said windows.....
Is there any special Authorization required for this
Help Required ....

What is this user license type? All financial transactions need professional license.
Thanks,
Gordon

FAGLGA35 - Actual Distribution in New General Ledger accounting

Dears,
In transaction FAGLGA35, system gives below mentioned messages :-
i) No valid sender entries were found. Message no. GA710.
Diagnosis
The system did not find a valid sender for cycle 0LZAWL, segment AWL. The problem can be due to the following reasons:
Master data checking for cycle 0LZAWL, segment AWL, found no valid senders for this segment.
The senders are valid from a master data standpoint, but the system found no posted values or quantities in the database corresponding to your selection criteria. The sender and the segment will be processed only if the cycle works iteratively and at least one sender in another segment receives values which it can then allocate iteratively.
In cycles for indirect activity allocation, this message appears if segment AWL is to allocate posted sender activity quantities but the sender has been completely scheduled. Complete scheduling of posted activity quantities occurs, for example, if you use cycle AWL in a test run but already used it in a current real processing run in the system.
System Response
The system cannot process the segment.
Procedure
Check the definition of segment AWL in cycle 0LZAWL. In particular, check the validity of the sender master data for the settlement period.
To do so in cycle maintenance, choose "Formal check".
If segment AWL allocates posted values or quantities, the senders in the segment are valid only if:
The sender holds actually posted values/quantities not equal to 0
The cycle is iterative, and the sender receives values in another segment which it can then allocate iteratively.
If necessary, you must set the iteration indicator in cycle 0LZAWL.
In a cycle for indirect activity allocation, check whether the cycle is currently in use for posting in the system sender in segment AWL and thus completely schedules the senders in segment AWL.
If this is the case, cancel the cycle and repeat the cycle execution.
As per message solution, i do all the things but the same message comes.
ii) Cycle 0LZAWL, start date 20080401, does not include any senders.
Message no. GA749
Diagnosis
No senders were found for cycle 0LZAWL, starting date 20080401.
System Response
It is no longer possible to create receivers and assign senders for the segment.
Procedure
Check the definition of the cycle in the maintenance transaction for Actual Distribution: General Ledger. No valid sender cost centers could be found to match your selection.
If you use the sender rules "Posted amounts" or "Posted quantities", check whether records exist in the database for the criteria you entered (cost element, version...)
During indirect activity allocation with the sender rule "posted quantities", you should also note that only the difference between the planned/posted activity allocation and the scheduled activity quantity is allocated. If you entered activity types as sender, you should at this point also check the activity type category. For those quantities posted with an activity type of category 1 (manual entry, manual allocation) no indirect activity allocation is possible.
1. If this is an allocation in the FI/FI-SL area, the problem could also be due to the inheritance logic for FI-SL totals tables, whose "Inheritance of sender based on the receiver" indicator is activated in the "Partner object update" view (T811U-INHERSRC). These are tables that were installed before Release 4.6A.
Use transaction GCA8 to check this, and see the section on:
Inheritance Logic for Allocations
then correct the affected cycle, if required.
Is anybody have any solution. Please suggest it.
Regards,
Kalpik Shah

s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

Posting of CarryForward New general ledger

Hi financial wizards,
our client uses new general ledger. The accounting block has been extended with some ZZ user fields carrying results determined via substitution exits during posting.
The additional customer fields are added to the accounting block and are stored on item level (BSEG) as on aggregate level (FAGLFLEXT).
After the run of transaction FAGLGVTR - 'Balance Carryforward (New)' we have the correct values in the carryforward column of the target account, but values from customer fields are not transfered.
SAP will not help us with a note at this time; the features may be integrated in a later release.
Now my question: How to post the carryforward values manually or by program? I know the SAP Carryforward does not create any documents but after the run the Carryforward period (period 0 in former times) is filled with the sums of previous years P+L accounts. Carryforward works correct i.E. for profit center but not for the additional clients fields.
We need some good ideas as how to overcome this obstacle.
Regards,
Clemens

Dear Peter,
I am afraid that you are mistaken. There is lot of difference between the New GL Accounting and COPA. They are entirely different and its utility is also different.
Here in New Gl, Characteristics means, segment characteristics, for example, business area, profit center, functional area, segment.
Trust this answers your query!
Cheers,
Ashok SINGH

Reviewing General Ledger Accounts - No line item detail

I have just started with a new company using SAP Business One for the first time. My frustration is when reviewing the general ledger line items that there is no detail coming through that lets me see what the amounts relate to. No Description or Vendor Name. There is absolutely no way I can see if there are any posting errors to accounts unless I drill into each and every line item to see what it is. I have been into Form Settings but the fields required are not available options to select.
Every accounting system I have ever used has this standard feature - from off the shelf packages to customised SAP R/3.
I have spoken to the Implementation Company's Support Line and they have said that it would be a costly exercise to request a report that provides this information.
I can't accept that this is standard - why would anyone use the system????
I guess I just want to hear that this is not the norm with SAP Business One
Thanks

Try the General Ledger Report, there is a little more detail there - the BP Name is, I'm sure, included in that and you still get the drill down.
In the account balance screen, you can add the "Details" field which may give you more information as it usually contains the BP Code. It is not a difficult exercise for you support team to add a formatted search to populat that with the account name instead - it is a reasonably common customisation.

General Ledger report with Op Bal , Trans Line Items and Closing Balance

Hi Experts,
My clients needs a General Ledger report which should show Opening balance and all transactions line items with closing figure in a single report for a fiscal year in the given date range wise. Can I get a report in standard sap. Waiting for your reply.
Thanks in Advance,
Arabinda Parida

Hi Parida,
There is no such report in SAP. Basically all standard report gives line items not with opening and closing balances. Anyway check mentioned transaction which may help to you.
S_ALR_87012309....It is cash journal report. Anyway you can enter GL account get opening and closing balances with all relavent transactions.
Regards
Suma

Difference in Open Balance As per Trial Balance and General Ledger in SAP

Dear All,
1 ) Whle generating trial balance in SAP B1 for one Business master there is a difference in Opening Balance as per Trial Balance and as per General Ledger how ever closing balance in matching.
Difference As follows
Report Name      ob cr     ob dr           dr                   cr                                  CL
General Balance          614536     19237612.34            18650320.01     1201828.33
Trial balanceB     4521743.19          19237612.34       13514040.82     1201828.33
Is it possible the open balnce should be same in both report. The opening balance as per GL report is correct.
2) I have run the period end closing for Apr- 2010 to Mar 2011 after that I generated the traial balance for Apr-1-2011 where the opening balances for expense account and revenue account is showing technically after period end closing the balance become zero for all closing balance revenue and expenses accounts.
Please note that there are some entries in revenue and expense account in on 1st apr. 2011.
Please guide on this.
Regards
Aarati Kollur.
<a href="http://www.youtubemp3.net/">youtube mp3</a>, <a href="http://www.limewire.name/">limewire</a>

Hi,
I think you should re-visit the selection creteria for the Trial balance.
The Display Opening Balance has two options. If you select from 'Start of Company activity', then it will include every balance of previous year.
Check for the Display Closing balance option as well. As you have performed the Period End closing, the checkbox options can have an impact on the outcome in the report.
Check the selection again.
Kind Regards,
Jitin
SAP Business One Forum Team

Changes from 11i to R12 for General Ledger Module

Can anybody help me from where can i get the document for technical changes from 11i to R12 for General Ledger Module.

check at:
http://www.oracleappshub.com/general-ledger/r12-oracle-general-ledger-new-and-enhanced-features/

F-03 and General Ledger View in New GL

Hi All,
SAP Version :ECC 6.0
FM activated
I am able to view the Profit Center in the u2018General Ledgeru2019 view in the document. But when the same document is seen in F-03 Profit Center cannot be seen (I understand F-03 follows the Entry View).
Is there any way
that the u2018General Ledgeru2019 View can be used while selecting documents in F-03(Clear GL Ac) ?
OR
Profit Center (not available in Entry view) can be viewed in F-03 ?
Regards,
Dev

Hi
Thanks for reply!
SDNFICO,
that the u2018General Ledgeru2019 View can be used while selecting documents in F-03(Clear GL Ac) ?
In FB00 > Document Display tab > Select check box "General Ledger View"
This doesn't helps. It changes FB03 view and nothing in F-03.My query is related to F-03.
Dawn,
I have done the same and later on found that PC is not visible.
Any more replies!
Regards
Dev

New General ledger accounting in ECC 6.0 : Profit centre not in BSID table

hi,
I already create new transaction code and report from standard transaction code
*s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items)* and i
also add Profit center fields into Dynamic selection.
My problem is, if i run the report using customer account the output is displayed but
if i run the report with customer & profit centre the output is not displayed. currently i'm using
new General ledger accounting in ECC 6.0 and when i look into bsid table the value
is empty for profit centre and the value for profit centre are stored in new table
FAGLFLEXT.
do i miss something?
thanks.

s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

Orange arrow in general ledger

Similar Messages

Maybe you are looking for