Orange Screen when switching

Hello, I recently bought a 15" mac book pro and partitioned the hard drive and installed 64 bit windows 7 on it, recently when switching from OSX to windows 7 using boot camp a orange screen with a white line will display and the computer is locked up. When turned off and turned back on windows 7 usually starts normally. I hadn't seen a similar topic on a similar problem and was wondering if I should be concerned.

I know exactly what you mean regarding Orange, ever since they were taken over by France Telecom they have been going downhill.
I ported away all of my Orange contract and PAYG numbers a few months back to o2 and Tesco myself.
I find the Orange branding on my old unlocked 6230 that I gave my mother serves as a reminder that they will never get a penny from me again. The branding does not affect any functionality as far as I can tell on Tesco.
I did have bluetooth issues with mine, so I had it updated at a Nokia service centre to 5.50 which cured most of the problems. If your handset is out of warranty they can charge anything up to around £20 for the firmware to be updated and depending on how you had it unlocked it could come back relocked to Orange, you could also have a word to see if anything can be done about the Orange branding if it still irritates you while you are there.
First use the search to see if your question has already been answered...
Secondly I will not knowingly assist in breaking the forum rules.
My information is always changing, what I post at the time is usually true.

Similar Messages

Images maximize (full screen) when switching windows?

When working with two or more images in Fireworks CS3 (Mac OSX 10.5.7)....
The image windows blast into full screen display when switching between images. I am new to CS3, (convert from Studio 8) but cannot find where to stop this irritating behaviour. I can correct by selecting Window>>Cascade - temporarily... But, when I click on another image window, that image blasts into full-screen again.
How can I stop this?
I really hate posting (usually preferring instead to lurk and scour the answers to my questions from previous posts). But, I am forced to post this question in hopes of a quick, simple solution to stop the lurching madness that makes me feel queasy every time my screen blasts an image into full screen mode..
Any help is appreciated... really, it is. :-)

OK, this is possibly a bug.
After restarting today, the problem did not occur until about an hour working with FW.
A restart did NOT stop it. So, I restarted again and tried three different files... It was fine for a while and then started the same thing again.
I am starting to lose hope that it is something I can do to prevent this. It appears that FW and Carbon are not playing together nicely.

Media Encoder Orange screen when encoding mts files

I'm trying to convert 1080p files from my Canon Vixia HFM41 to Youtube 720p using the Media encoder, and it typically works for about 20 seconds and then hangs up and I get an orange screen. At that time I can see it dumping RAM and the CPU usage goes down to zero. If I let it continue, sometimes it'll finish, but the video has long sections of orange screen.
I'm using latest versions of Premiere and ME with a Windows 7 machine. i7 2.2 ghz core, 8gigs of RAM, Nvidia cuda core GPU, SSD. Basically, the machine shouldn't be the problem.
BTW, I encode GoPro vids all the time with no issues. It's only these .mts files that are causing this.
Please help.

It does NOT play back in Premiere in its native format, which is why I started looking into converting it in ME prior to editing in Premiere. It drops frames even on 1/2 resolution in the preview window. I tried to force a timeline render and it hung up and gave me orange frames....even though the yellow line indicated it didn't need to render to play back ok.
I'm sure it's not hardware related, because when I had Premiere 5.5 on a significantly slower computer I routinely edited the same footage without converting.
I suppose I should start a new thread in the Premiere section to figure that out as well, but it still annoys me that ME isn't converting properly.
Any ideas?

Red screen when switching the camera.

Hi When I switch my camera from normal shooting to face me, it appears with a red screen. when i look at the lens on the front of the phone it appears to to red inside, but the back lens is normal.
Please any info will be appreciated.
Marc.

stants66 wrote:
Hi,
Yes the screen turns red when switching the camera. No it does not stabilize & I canot see myself when switching the cam.
Yes restart your phone as suggested above. Then use BlackBerry Virtual Epert to run a camera test.
Update us with the result
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

In the edit screen when switching between photos, it starts clear and then after a second, it becomes a little blurry. Any one else experiencing this?

In Iphoto, when in the edit screen, when the photo first comes on it appears clear, then after about a second, it blurs a bit which makes it hard to edit. This does not happen when previewing each photo, only when editing.
Anyone else have this issue.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Why does my imac get a black screen when switching on

why does my imac get a black screen when turning on, and logging in is very slow.

I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Let us know if these procedures don't solve the problems.
Hope this helps

Occasional grey screen when switching between SL and Windows

Hi folks,
I set up my new Mac Mini to dual-boot with Windows XP using boot camp. Sometimes when I switch from one to the other the system hangs on a grey screen and I have to shut down using the power button. This happens both when I choose restart and hold down the options (alt) tab and when I use system preferences and choose the boot drive from the menu. This is my config:
Mac Mini 2009 with 120GB HDD and 2GB RAM, running Snow Leopard and WindowsXP, Microsoft Natural Curve Keyboard 2000 and Logitech Optical mouse (both USB),
HP 1310 AIO inkjet printer. I am networked to an HP 1320tn laserjet printer and an NAS that is formatted to FAT32. Everything works.
Additionally, I have an external drive (2.5" HDD) that connects to the back of the Mini using two USB cables for power. I'm pretty sure I have the external drive formatted to FAT32 because both operating systems can see the contents.
I am wondering if the external drive is sometimes confusing the bootloader (or whatever it's called in the Mac world) and is the source of my problems. I am open to suggestions.
Thanks in advance,
Bryan

Well, I eliminated one problem: the external HDD was indeed formatted NTFS. I just installed a new external HDD formatted FAT32, connected by firewire, so I was able to take one USB device out of the system (and free up two USB ports). So far the computer is booting properly with no hangs and I am able to access, read, and modify documents from the ext drive when I am in SL.
Also, just for giggles, I ordered an Apple keyboard to further reduce incompatability risks (and to get the Apple shortcut keys. However, I am not parting with my Logitech mouse: must have two buttons.
We'll see if the problems occurs again.

Satellite C55-A-1N1 Black screen when switched on

I've had my laptop for 7 months, I've had a lot of problems with it from the beginning.
It has always run slow and started disconnecting itself from the internet for no reason.
A few days ago it refused to connect to the Internet at all and now when I switch it on I just get a black screen.
No beeps or logos just a black screen. It powers up OK, and I've tried switching on while plugged in and with just the battery running.
It's still under warranty but I wonder if anyone has any suggestions. I'm really disappointed as my last Satellite was brilliant for years, had no problems.

Are you able to access the BIOS?
To access the BIOS press power button following by F2 button.
In case this isnt possible try this:
Disconnect AC adaptor and remove battery.
Now press and hold power button 30sec long.
After that connect the AC adaptor and battery and press the power button once again to power up the notebook.
Is this possible? Feedback would be appreciated

Line across screen when switching between applications?

2011 21.5" iMac OS X Mavericks (10.9)
AMD Radeon HD 6770M 512
Since upgrading to Mavericks I have noticed a line across the screen during the genie effect when you open, close or minimize applications. The line is most noticable when minimizing an application which is on top of my wallpaper. The wallpaper is the default Mavericks image.
The line does not appear when scrolling or sliding back through pages in safari etc. The above is the only thing that will trigger the issue.
Is anyone else experiencing this or have a solution for it?

Do you have any third-party extensions installed? I googled and found several that will perform this auto-hide action: Quitling, App Presto, AutoHide, and DragThing are some of them.

Green/Glitched Screen when switched from CS5.5 to Adobe CC.

I recently upgraded from CS5.5 to Adobe CC, and I converted a Premiere Pro project to open in CC. ALL of the video was green or glitched looking. The source videos are .mp4, with 17 videos that I'm pulling from to make this project. They have also changed from 59.94 fps to 0.00 fps or 0.01 fps. It shows up in Quicktime fine, and played in CS5.5 fine. I can only hear the audio, but all the video has turned green.
I am using:
Mac 0S 10.9.4
Adobe CC Premiere 8.0.1 (21) Build

Hello I just wanted to update and look for help again. For my previous project I just went back to CS5.5 and continued working from there since I was unable to solve my problem. I was able to start a new project after that without problems, but now, I have started another project from scratch, and it is showing up with the green screen after importing, again. The videos should be at 59.94 fps, but are showing up at anywhere from 0.00 - 0.06 fps, 0.37 fps, and 0.61 fps. I can still hear the audio, but am only getting a blank green image instead of video. Please note I started this project directly in Adobe Premiere CC this time as opposed to starting in CS5.5, and am still running into this issue. Could anyone please tell me why this is occurring and help me out?

That annoying orange screen when I close a file

Is there a way to get rid of that screen that pops up every time I close an Illustrator document? For heavens sake, if I wanted to do something else in Illustrator I know how to navigate to it without that annoying screen prompting me. It's really just in the way. Surely there's a preference to turn that thing off somewhere?

Figures. I was looking through preferences but never even saw that little button in the left corner. I've just been clicking away from it in frustration all this time without even looking it over in depth. Thanks.

Orange Screen

Hi, I get an orange screen when I view my video that was filmed on a droid X phone. The file type is a 3GPP Audio/Video (.3gp). The audio sounds fine but no video. Any suggestions? Thanks, -AP

Try using a free program called MPEG Streamclip to export the file as an AVI format which is much more compatible with Premiere Elements.
You can get the program here: http://www.squared5.com/
I have taken 3GPP2 files (.3G2 extension), which are very similar to 3GPP files and successfully exported them as AVI's using MPEG Streamclip, which then worked great in PRE when the original files wouldn't work at all.
Let us know how things work out.

How to switch off laptop screen when you connect external LCD?

Hello, being new to Mac I'd like to ask if it is possible to completely switch off the laptop screen when you connect an external LCD screen and use it as your main desktop. My MacBook Pro does that automatically when I launch a full screen game, say World of Warcraft, but I would like to be able to do it manually.

If you have it connected to a keyboard and mouse, you just shut the lid and use it that way. Of course, I'd be curious why you wouldn't want to use the screen. Having two screens can be extremely useful. The only problem with it is that then you may miss it when you are away from your second screen!

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

How to correct or fix slow imac on start up or when switching user. Blue Screen will stay on for 3-5 minutes.

How do I fix a slow imac on start up and when switching user? The blue screen will stay on for 3-5 minutes.
Thanks

How much free space do you have on your hard disk? And have you ever performed a backup & clean install after an OS X upgrade?

Orange Screen when switching

Similar Messages

Maybe you are looking for