OraOledbous10.dll Specific module could not be found
To Any Oracle experts,
I have downloded the latest Oracle 10g Vista\XP client 10.2.03 which includes the OraOledb ADO drivers. I am getting a spuradic error :
"OraOleDBpus10.dll .. Specific module could not be found." My Oracle database is 9i ..
Strangly enough .. this only occurs when I run my executable from my local drive ( xp sp3 ) . if I place the executable on a network drive .. running it from my box ( same box ) .. the error does not occur ..
I am new to this forum .. I am using a TOLeAuto() class from xHarbour and Borland's C++ 5.5 compiler. The below code is the syntax. I loaded the Oracle database utilities, SQL+ and the Windows Drivers which includes the OraOledb. I know the setup is working because I can connect with the SQL+ utility so I know my tnsnames and sqlnet.ora files are correct.
Again .. this error only shows up sporadically on my local xp-sp3 box .. I have not loaded it on Vista .. and forget about Windows 7 .. the client will not even install because the OS version number is out of range.
The paths are correct, and my compiled program runs from a network .. just not ( always ) on my local xp sp-3 machine .. especially seems to happen after a run-time failure of my application. This is an app in development and I wil lhave run-time failures constantly.
Any advice would be quite helpful
Rick Lipkin
SC Dept of Health, USA
xPROVIDER := "OraOledb.oracle"
xSOURCE := "efis"
xUSERID := "suntrack"
xPASSWORD := "xxxxxxxx"
oRs := TOleAuto():New( "ADODB.Recordset" )
oRs:CursorType := 3 // opendkeyset
oRs:CursorLocation := 3 // local cache
oRs:LockType := 3 // lockoportunistic
cSQL := "SELECT FAC.LOCAL_FACIL_EID, "
cSQL += "FAC.TANK_OWNER_EID, "
cSQL += "FAC.SITE_NUM AS SITE_NUM, "
cSQL += "STANDARDTASKS.GETNAME( LOCAL_FACIL_EID,'NO_NUM' ) AS FACILITY, "
cSQL += "ADDR.ADDRESS_1 AS ADDRESS, "
cSQL += "ADDR.CITY AS CITY, "
cSQL += "ADDR.STATE_CODE AS STATE, "
cSQL += "STANDARDTASKS.GETNAME( FAC.TANK_OWNER_EID,'NO_NUM' ) AS OWNER, "
cSQL += "FAC.LOCKED_IND AS READ_ONLY "
cSQL += "from SUNTRACK.EFIS_UST_FACILITIES FAC, "
cSQL += "SUNTRACK.ADDRESSES ADDR "
cSQL += "where ADDR.OWNER_EID = FAC.LOCAL_FACIL_EID "
cSQL += "AND ADDR.ADDRESS_TYPE_CODE = 'BUSINESS' "
cSQL += "AND ADDR.STOP_DATE IS NULL order by site_num"
TRY
oRS:Open(cSQL,'Provider='+xPROVIDER+';Data Source='+xSOURCE+';User Id='+xUSERID+';Password='+xPASSWORD )
CATCH oErr
MsgInfo( "Error in Opening EFIS_UST_RELEASES table" )
oWndChild:Show()
RETURN(.F.)
END TRY
Would you resolve this problem? I have the same problem.
Similar Messages
-
I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll
Please tell me there is a fix that does not involve buying a computer clean sweep program.Hi brigitta2,
You might be getting the error message because of any of the following reasons:
.dll files are corrupt or missing
Attack of malware or other spyware
Incorrect installation of applications
Damaged Windows registry
Old Windows device drivers that need to be updated
The problem can be sorted if you know the exact reason behind the same. Please let me know the exact error message that appears on your screen.
If the issue is with damaged files then you might need to replace them or if it is a system issue, then please take your laptop to an expert who can deal with system issues.
Regards,
Anubha -
The specific module could not be found
hi,
While i am opening cube in SSDT, I am getting error like "the specific module could not be found"..pls help me to solve this issue.
Thanks
SelvaI found solution myself. i replaced DDL
C:\Program Files (x86)\Common Files\Microsoft Shared\MSDesigners8
from where Visual solution is working fine. -
Db2-connect error - dboraslib.dll - specified module could not be found
While I am trying to START SAP server, its giving the db2-connect error . showing the following error, can anybody throw some light.
Thanks
trc file: "dev_w1", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat Sep 30 19:06:25 2006
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DWK\SYS\exe\run\dboraslib.dll' ...
M
M Sat Sep 30 19:06:45 2006
M *** ERROR => DlLoadLib: LoadLibrary(D:\usr\sap\DWK\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'D:\usr\sap\DWK\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 1580
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 1580) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Sat Sep 30 19:06:46 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sat Sep 30 19:06:48 2006
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DWK\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(D:\usr\sap\DWK\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'D:\usr\sap\DWK\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server star47e_DWK_00 on host star47e (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Sat Sep 30 19:06:48 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M
M Sat Sep 30 19:06:49 2006
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 1580) [dpnttool.c 345]thanks cyrus.
I just updated the kernel and it got me passed the error but now it stops somewhere else.
Previous error OK:
B Library 'C:\usr\sap\DRS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\DRS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.79)
B New connection 0 created
M sysno 00
M sid DRS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 87
M intno 20020600
M make: multithreaded, ASCII
M pid 3360
New error:
X ES initialized.
M
M Mon Oct 23 16:42:37 2006
M calling db_connect ...
C Prepending C:\oracle\ora81 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C *** ERROR => Couldn't initialize Oracle client library,
please check your installation!
[dbsloci.c 1935]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1273]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9530]
M
This look familiar?
Thanks again. -
API Support.DLL Specified Module Could Not Be Found Error
Dear Sir/Madam,
While Starting my laptop the following error message is displaying on my desktop screen:
"There was a problem Starting
C:\user\dell\app data\local\conduit\API support\API support.dll
The Specified Module could not be found"
Kindly help me to resolve this problem as soon as possible.
Regards,
Chirag Agarwal
{REMOVED}Hi,
Please try to restore the system back to the point before the issue happened.
If the issue persists, test in Clean boot mode and Safe mode.
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
half services.
Let us know which service or startup cause this pop-up.
Kate Li
TechNet Community Support -
I am an old lady...please e-mail me in understandable talk for me..I do not know too much about computers.
Would like to eliminate this small box when starting up the
computer....HELPHello! That DLL may be related to your Lexmark printer. You may need to remove and reinstall the software to fix that issue. Do you still have your disk for it?
-
I don't know if this has anything to do with Firefox, or not. I sure would appreciate any help. Could this be why I can't download anything?
>
Efstratios Karaivazoglou wrote:
> Make sure to use CR Designer 2008 V1 (WITHOUT SP2) unless you install SP2 for BO Edge.
OK, so I will only install the BO Client Tools as well as the SAP Integration Kit. I don't necessarily need CR at this moment.
@ Raghu: we are on the base version of the BO Edge and SAP Integration Kit installation (= no SP, no FP)
EDIT:
I now installed the BusinessObjects Client Tools and the SAP Integration Kit on another PC, the error didn't occur on this PC -
Icon-the specific module could not open, background contains pops up on opening firefoxwhe
recently became new fire fox customer.two items it will not open one specific site i always visit.when i click on the site in gmail to open it the whole page fades and the sys freezes i have to x out of it.
the other problems is icon when firefox opens says the specific module could not be found background contains. what does this mean.
thxHello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
HPStatusBL.dll module could not be found
Before I installed my new HP printer, I uninstalled my HP Deskjet 3050A J611 series printer through Windows 7 uninstall program. Now everytime I boot up I get the following message:"There was a problem starting C:\Program Files\HP\HP Deskjet 3050A J611 series\bin\HPStatusBL.dll. The specified module could not be found."This does not affect the behavior of my computer, nor does it affect the working of my new HP printer. But I can't figure out how to get rid of this message.Help!Thank you to anyone who can help me.
Intruderscooter wrote:
After exhaustive research...this is the HP Monitor Ink status dll. It is heavily embedded in the computer and is not so straightforward to locate. Here is the path I took: MSConfig / Startup / Monitor Ink - this tells you where the .dll is locatedwithin your system. Follow that specific path and then delete the file. For example, for me it was one of the two paths below (can't remember which of the two now) but as long as you start with MSConfig / Startup it will get you there. You may also want to ensure that it is not running as a Service within MSConfig under the same name (Monitor Ink)Again, mine was embedded under one of these paths (as an example):
C: Windows / Users / (your name) / Roaming / Startup / Monitor Ink shortcut (delete this)e or...
C:Windows / Users / (your name) / Roaming / Application Date / Startup / Monitor ink shortcut (delete this)
Like I said, it is heavily embedded and each user configuration may be a bit different so start by finding the path within MSConfig / Startup / Monitor Ink. Hover over the location and it will identify the exact path.I would like to thank you for solving my "RunDLL Error" problem, I used your information and now the error is fixed.Thank You, Thank You, Thank you. P.S. Thank You. I wish you a great and wonderful healthy life. -
Hi,
I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.
-
Error :the specified module could not be found --oci.dll : Oracle9i
hi ,
i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
"the specified module could not be found" for the file oci.dll.
earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
with regards,Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.
-
I initially got the Error -2032 message after downloading the newest version of itunes. I read a geek blog that said to uninstall Quicktime and I did that a bunch of times. I also uninstalled and reinstalled itunes repeatedly. None of this works. I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know. It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime. I did this at the suggestion of the blog, but I may have screwed it up. Now I need to repair the missing .dll and still try to get itunes running
ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init(); -
Dboraslib.dll - Error 126 : "The specified module could not be found."
Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 1 successfully loaded
shared lib "dw_xtc.dll" version 1 successfully loaded
shared lib "dw_stl.dll" version 1 successfully loaded
shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar -
Module could not be found: VersionCue.dll
Currently, whenever I attempt to start Photoshop CS4 Extended, it launches fine. However, when I try to open a document (doesn't matter whether it's an old photo or a new blank one), I get an error:
The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.0\VersionCue.dll
I have tried to find a solution (particularly here), but not to much avail . I'm currently using Windows 7 Ultimate, 32-bit.Your welcome. I found on the Adobe download page the 4.0.1 version cue update for windows. When you download it make sure you right click on it and run as admin.
Also if you have a download problem turn off popup blocker in Internet explorer.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4218
Edit: Make sure nothing Adobewise is running or running in the background before install. -
I am using intermec printer (directly loading to the printer no system used for printing) for this program and if i run this,i'm getting this below error
"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}
any help on this .........
Thanks in advance.
using System.Globalization;
using Intermec.Printer;
using System;
using System.IO;
using System.Threading;
class TestCommunicationUSBHost
static UI.Canvas _canvas;
static UI.Keypad _keypad;
static UI.Canvas.Text _exitInstruction;
static UI.Canvas.Text _appliCationTitle;
// static UI.Canvas.Text _companyname;
static string _operatorCodeValue;
static UI.Canvas.Text _operatorCodeDisplayText;
private const string operatorCodeDisplayHeader = "SCAN Code: ";
static PrintControl printControl = new PrintControl();
static Drawing drawing = new Drawing();
private static bool _isExitKeyPressed = false;
// private static Communication.USBHost _usbHost;
static int Main(string[] args)
// Init new UI canvas
_canvas = new UI.Canvas();
// Set up some colors to use
Color white = new Color(255, 255, 255, 255);
Color blue = new Color(50, 100, 150);
// Add UI black background
UI.Canvas.Rectangle bg = new UI.Canvas.Rectangle(0, 0, _canvas.Width, _canvas.Height, blue);
_canvas += bg;
// Add Line
UI.Canvas.Line ln = new UI.Canvas.Line(10, 35, 300, 35, white);
_canvas += ln;
// _companyname = new UI.Canvas.Text(30, 45, "KEYBORD DEMO", "Univers Bold", 18, white);
// _canvas += _companyname;
// Add UI keycode text
_exitInstruction = new UI.Canvas.Text(20, 200, "Press [F4] to EXIT.", "Univers Bold", 18, white);
_canvas += _exitInstruction;
_appliCationTitle = new UI.Canvas.Text(05, 05, " A1 Technologies", "Univers Bold", 23, white);
_canvas += _appliCationTitle;
_operatorCodeDisplayText = new UI.Canvas.Text(20, 100, operatorCodeDisplayHeader, "Univers Bold", 20, white);
_canvas += _operatorCodeDisplayText;
// Set up keypad event handler
_keypad = new UI.Keypad();
_keypad.KeyDown += new UI.Keypad.KeyEventHandler(KeyHandler);
// Set up timer event handler
UI.Canvas.Timer timer = new UI.Canvas.Timer();
timer.Interval = 1000;
timer.Tick += new UI.Canvas.TimerEventHandler(TimerHandler);
timer.Start();
//int USBHost port o or Setup USBHost
Communication.USBHost _usbHost = new Communication.USBHost("/dev/ttyUSB0");
_usbHost.Open();
// Enter UI main loop
_canvas.Run();
// Cleanup UI
_canvas.Dispose();
_keypad.Dispose();
return 0;
public static void KeyHandler(Object o, UI.Keypad.KeyEventArgs eventArgs)
int keycode;
keycode = eventArgs.KeyChar;
if (keycode == 4)
_isExitKeyPressed = true;
return;
public static void TimerHandler(Object obj, UI.Canvas.TimerEventArgs eventArgs)
if (_isExitKeyPressed)
UI.Canvas.Timer timer = (UI.Canvas.Timer)obj;
timer.Stop();
_canvas.Exit();
else
// Open the first USB host device and read any data sent
Communication.USBHost usbHost = new Communication.USBHost("/dev/ttyUSB0");
usbHost.Open();
if (usbHost.IsOpen)
Console.WriteLine("Opened /dev/ttyUSB0 ({0})", usbHost.HIDName);
FileStream fileStream = usbHost.GetStream();
try
int timeout = 0;
int i;
while (timeout < 5)
// Console.WriteLine("Exiting in {0} secs", 10 - timeout);
Byte[] bytes = new Byte[256];
if ((i = fileStream.Read(bytes, 0, bytes.Length)) > 0)
// string data = System.Text.Encoding.ASCII.GetString(bytes, 0, bytes.Length);
string data = System.Text.Encoding.ASCII.GetString(bytes, 0, i++);
_operatorCodeValue = data;
// _operatorCodeValue = _operatorCodeValue + data;
_operatorCodeDisplayText.Data = operatorCodeDisplayHeader + _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
int leftCordinate = 40;
drawing.Clear();
Drawing.Text line1Text = new Drawing.Text();
line1Text.Point = new Point(leftCordinate + 30, 40);
line1Text.Data = _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
line1Text.Height = 18;
line1Text.FontName = "CG Times Bold";
drawing += line1Text;
drawing.PartialRendering = true;
printControl.PrintFeed(drawing, 4);
else
Thread.Sleep(1000);
timeout++;
catch (Exception ex)
Console.WriteLine("Exception reading /dev/ttyUSB0: {0}", ex.Message);
// Wait a short while
Thread.Sleep(1000);
// Clean up
// usbHost.Dispose();
return;Hiya,
The error is because the app tried to import that driver but it was not found. So, you will need
to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
The code snippet does not show any information about the DLL import, check there too.
Hope this helps. :)
Maybe you are looking for
-
Hello, 2 Z10s (10.1.0.4181 - 10.1.0.4633) on different locations with 2 Fritz!box 7390 on 5Ghz with firmware 5.50. Worked a long time, then maybe 2-3 weeks ago problems started. Tablets are not affected so I suppose its our Z10s fault. WiFi works, th
-
I just opened a new I tunes account. The music that I purchased from an old account will not transfer to my new account & the old account email no longer exists it is (djbdeercreek613@com***t.net) and the password would not be accepted when we enter
-
Let's say I have the following code: DATA idx TYPE i. DATA msg TYPE string. msg = "You are on index #". CONCATENATE msg idx INTO msg. WRITE msg. This obviously won't work because idx isn't the right data type so my question is, how do I cast idx into
-
CloseDoc is interrupting a batch run script in Acrobat X
I am using a batch script to split a PDF file and then process (send via email) the individual pages. Because extractPages opens the new page each time it's called, I had inserted a closeDoc referencing the new doc object so that I didn't end up wit
-
HTTPS hyperlinks not working when report exported to PDF
Hi, I have the following problem - I have a https link in the report, which works properly when the report is exported to HTML, Excel, DOC, but no hyperlink is rendered when the report is exported to PDF. Important: When http:// or mailto: are used i