Oraview.vrf(0):File_NOT_FOUND

I am installing oracle 8.0.5 on RH 6.1. I have installed the software without create database. After that I tried to create database through ./orainst, but I got message "oraview.vrf(0):FILE_NOT_FOUND while verifying oaview ( No such file or directory ) I have tried to find solution here, but I couldn't, please help.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Peter:
Which unix.prd file have you selected for
the create database installation session?
Pick the unix.prd file from the ORACLE_HOME
directory - NOT from your orainst directory.
HTH,
Peter<HR></BLOCKQUOTE>
Is it change within installer? If so, I have tried, but doesn't work. ??
null

Similar Messages

  • Oraview.vrf(0) is missing -- installation problem

    Hello:
    I had a problem when I was trying to install Oracle 8.0.5 on my
    RedHat 6.0 machine. Please help me if you happen to know the
    solution. It seemed that everything was OK at the first stage of
    my installation. After I set the environment variables, I ran the
    orainst to install new product without creating database. After I
    got the success result, I ran the "glibcpatch" script. I also got
    the message saying "Applied glibc patch for Oracle 8.0.5.
    successfully." Well, after I ran the orainst again to try to
    create database objects, I got the problem. In the install
    screen, I select "Oracle 8 Standard RDBMS 8.0.5.0.0". After the
    installation ran for a while, I got this message:
    Oraview.vrf(0): FILE_NOT_FOUND while verifying oraview.
    (No such file or directory.)
    I tried several times to install again from the very beginning.
    But each time it stopped there. I got the same results. Did
    anybody out there have the same problem before? If you know how
    to solve this problems, please help me. Your help is greatly
    appreciated. Thanks in advance.
    Warren
    null

    Phan Anh Tran (guest) wrote:
    : Hi all,
    : I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
    : However, I am running into a couple of post-installation
    : problems.
    : 1. root.sh (sucessfully ran).
    : 2. glibc patch (successfuly ran). There were a few errors on
    the
    : screen with the "mv" commands (file does not exist). Is tha
    : alright?
    : 3. catrep.sql (problem). This is where I have a problem.
    : I ran dbstart as oracle805 (installation account), but I have
    no
    : idea whether or not I really started the database. ps -aux did
    : not yield any clue.
    : I also tried svrmgrl and "startup", but the file "initXXX.ora"
    : did not exist, so I copied the existing "init.ora" to
    : "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
    gave
    : me the following:
    : ORA-00202: controlfile: 'ora_control1'
    : ORA-27037: unable to obtain file status
    : So, in other words, I have no idea whether or not I have
    : successfully installed Oracle. All insights are greatly
    : appreciated.
    : Thanks a bunch...
    : Anh
    Hei !
    I also did this fault :-( See this webpage - it's excellent
    and describes everything.
    http://jordan.fortwayne.com/oracle/rh6x.html
    null

  • NEWBIE:rdbms_commonm.vrf(0) FILE_NOT_FOUND

    Hi,
    I'm trying to install oracle 8 from unziped downloaded pack.
    I've been getting this error message during install operation:
    rdbms_common.vrf(0) FILE_NOT_FOUND
    But the file is there.
    My enviroment is RH5.2 and gcc 2.7.2.3.14
    TIA
    Helio Silva
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Peter:
    Which unix.prd file have you selected for
    the create database installation session?
    Pick the unix.prd file from the ORACLE_HOME
    directory - NOT from your orainst directory.
    HTH,
    Peter<HR></BLOCKQUOTE>
    Is it change within installer? If so, I have tried, but doesn't work. ??
    null

  • Install Oracle8 on linux

    When I follow the installer to install Oracle8 on linux, there
    comes a Notification message box, it say,
    oraview.vrf(0): FILE_NOT_FOUND while verifying oaview( No such
    file or directory)
    Who can tell me what caused the problem?
    Pine.
    null

    May be it will help
    http://www.thomasfly.com/Oranux/index.htm

  • Unable to install forms 6i

    Hi!
    I'm having problems in installation of oracle forms 6i. I had created a new oracle home but still its giving me problem.After I select the option to install oracle forms it progresses until 'analyzing dependencies' and then it either gives me errors:
    rsf80.vrf(1): Start block token when 'End of File' found
    or
    Dya.vrf(0):file_not_found while verifying rfs80
    or
    it aborts abruptly.
    Any help is appreciated.
    Thanks,
    Prasanna.
    null

    I had experiences of installation problems of Oralce products such as Oracle Forms and Servers when the machines were previously installed Oracle products.
    To avoid such installation problems, the best suggestion from Oracle is to have a clean machine. When re-formating the hard disk and re-installing the OS is not a practical choice, we need at least clean up the window registry as much as we can(Windows 95/98 or Windows NT) after we uninstall the previous Oracle products.
    To clean up the registry, first thing is to go to Run|regedit|hkey_local_machine|software and delete the Oracle directory. Then I would do search items using keyword 'oracle' to delete items related to those Oracle products we want to delete. (But be very careful!) Though we won't be allowed to delete everything we want to delete, but at least it's much cleaner than if we just do uninstallations.
    Ora_Dev

  • Installation of fail safe unsuccessful need hlp

    tried to install failsafe but failed:
    1. using microsoft cluster server
    2. installing oracle fail safe 2.1.3
    3. using 2 netfinity 7000 and 1 ssa
    4. method of installation = staged
    5. on partitioned configuration
    4. error as follows:
    a. dr watson for windows nt
    application error
    oradim80.exe
    b. appschkd vrf(0): file_not_found while executing 'lu'
    c. WinZip extractor failed may be due to bad disk or file trasfer
    null

    This happened with the OS X Mountain Lion upgrade, I had to 'move' three files (com.pgp.framework.PGPwide, keyserver1.pgp.comGIobalDirectoryKey.asc, and PGPnke.kext) to get my system up and running again.
    This time  you have to move the file PGPwde.kext found under the /Library/Extensions/  I have those files on my desktop, but you can move them anywhere you want.
    Reboot the Macn and voila!  
    Yes I upgraded to Maverick last night and the first issue I had was with the KeyChain, the fix was easy, but the system wouldn't let me make it since the PGP file was rebooting the system. I had to go into SafeMode (press SHIFT upon reboot) and then I fixed my KeyChain probem (had to reset the password), then I fixed the PGP problem.
    Thanks and hope this helps!

  • Oracle 8 Enterprise & RedHat 6.0

    Every time I try to install oracle I get a surprise...
    The first time I tried (on RH 5.2) there was a missing
    directory, annoying but not blocking...
    Now I have installed RH 6.0....
    "...segmentation fault...." ARGH!
    Ok, there is a patch, great!
    I install it again without creating the database, then I apply
    the patches...
    Now let's start again orainst and let him create the db...
    problems.... problems...
    1) oraview.vrf(1)... FILE NOT FOUND!!!
    what the hell is this?ARGH!
    don't ask me how I succeded in solving this problem...
    2) ARGH! what's that <sid_name> in tnsnames.ora?..
    OK.. change it to "orcl" and let's start it again...
    3) Could not create database???????
    Let's try it by hand...
    $svrmgrl
    SVGRML> connect internal
    Connected.
    SVGRML> startup nomount
    ORA 27102: out of memory
    Linux Error: 22: Invalid Argument
    At this point i give up...
    Where is the problem?????
    P.S. do oracle people test their installation procedures?????
    null

    Carlo Sirna (guest) wrote:
    : Every time I try to install oracle I get a surprise...
    : The first time I tried (on RH 5.2) there was a missing
    : directory, annoying but not blocking...
    : Now I have installed RH 6.0....
    : "...segmentation fault...." ARGH!
    : Ok, there is a patch, great!
    : I install it again without creating the database, then I apply
    : the patches...
    : Now let's start again orainst and let him create the db...
    : problems.... problems...
    : 1) oraview.vrf(1)... FILE NOT FOUND!!!
    : what the hell is this?ARGH!
    : don't ask me how I succeded in solving this problem...
    : 2) ARGH! what's that <sid_name> in tnsnames.ora?..
    : OK.. change it to "orcl" and let's start it again...
    : 3) Could not create database???????
    : Let's try it by hand...
    : $svrmgrl
    : SVGRML> connect internal
    : Connected.
    : SVGRML> startup nomount
    : ORA 27102: out of memory
    : Linux Error: 22: Invalid Argument
    : At this point i give up...
    : Where is the problem?????
    : P.S. do oracle people test their installation procedures?????
    I do not know what is your problem. I have completed my Oracle
    805 (standard edition) installation on RedHat 6.0, and everithing
    works OK.
    Of course you have to fix manually tnsnames.ora and change the
    owner of some tnslistener files from root to oracle.
    I also parformed chmod -R a+rx $ORACLE_HOME.
    Anyway you are right, the Oracle documentation about the
    installation is extremelly poor. This is normal for a company
    like Oracle.
    Miklos Nemeth
    null

  • Create objects.

    Hello:
    I was install oracle 8.0.5 under linux, the documentation talk
    about you must
    create objects in one session different of the initial oracle
    installation.
    I installed oracle successfully, but now when i try to create
    objects in other
    orainst session appear one error:
    oraview... file_not_found.
    What can i do?
    null

    John Sanabria (guest) wrote:
    : Hello:
    : I was install oracle 8.0.5 under linux, the documentation talk
    : about you must
    : create objects in one session different of the initial oracle
    : installation.
    : I installed oracle successfully, but now when i try to create
    : objects in other
    : orainst session appear one error:
    : oraview... file_not_found.
    : What can i do?
    Don't quite get your point but the usual way to create data
    objects is: log into the oracle as an ordinary user and then
    create object using the usual commands such as :CREATE TABLE
    .....blah blah. If I didn't quite catch your meaning can you
    specify your question a bit concrete.
    John
    null

  • Do you need a cisco router at remote sites when using VRF BGP?

    Hello.....
    If you could refer to the attached document and read the following... I need to know if a CISCO router is required for each of the sites.   OR does the ISP (Provider) provide the only required Router in the private cloud?
    We want to replace the Cisco 891 with a PepLink but I don't know if we can do that.  Can anyone jump in and help me understand?
    When we hear about VRF, its almost synonymous to MPLS VPN. Virtual Routing and Forwarding is commonly used by Service Providers to provide services within an MPLS cloud with multiple customers. The most interesting feature of this is that, VRF allows creation of multiple routing tables within a single router. This means that overlapping use of IP addresses from different customers is possible. Some enterprises use VRF to seggrate their services like VOIP, wireless, geographical location and other varieties.

    Whether you can replace the 891 device with another device boils down to a single question: Do you need to run BGP with the Service Provider in order to use their service. If you need to run a routing protocol with your service provider, your service is likely a L3VPN (IP VPN) solution ( i.e. you inject your site's routes into the providers L3VPN session, they use MP-BGP+VRF for segmentation within their network).
    If, however, they just drop you a L2 connection and provide L2 emulated services ( e.g. L2VPN or VPLS ) across their network, then your device can be whatever you want it to be.
    From your device's perspective, it is not VRF aware. That is, it does not know about how the service provider segments your service from another customers. In the L3VPN case, your device is routing-protocol aware. In the L2VPN case, your device is not routing protocol aware and does not need to form adjacency with the service provider's equipment.
    HTH.
    Rate if helpful.

  • Communication between multiple vrf context on fwsm

    i have 2 vrf context on fwsm of 6509 switch. i want to reach from vrf context1 inside to vrf context inside. how can i do it?
    vrf_context1_inside----6509_fwsm----vrf_context2_inside
    vrf_context1_inside must reach to vrf_context2_inside

    Thanks for the response.
    FileLock. We still have to target JDK 1.3 so we can't use FileLocks (at this point)
    JNI: That's an interesting idea. I suspect many people are using our software on Windows. Therefore, we could probably fix it in Windows the same as in the C++ code. If they're not on Windows, we could use the Sockets approach.
    I also had another idea: how about hashing the username string into some integer (or long) value. Then use the hashed value to lock some other resource: like the port number passed to ServerSocket. I know ServerSocket only accepts 0 - 0xFFFF so this obviously won't work. But is there some other system-wide thing we could lock given an integral value?

  • How to configure OSPFv3 with VRF in IOS (a guide)

    Hi everybody,
         I recently found myself in need of configuring VRF segregated IPv6 routing with OSPFv3 in a pair of IOS 6500s. After a bit of research, I found that although the latest IOS releases for the 6500 (15.1(1)SY for the Sup720 and Sup2T) support configuring OSPFv3 on VRFs, Cisco has yet to release any documentation pertaining to its configuration other then command references. So, I thought I would share some of the pertinent and important details I discovered along the way to getting this working and collect them all in one place to help out anyone else who is trying to do this.
    1. The first thing you need to do is turn it on. Make sure you have enabled IPv6 routing with the "ipv6 unicast-routing" command and IPv6 VRFs with the "mls ipv6 vrf" command. Without these enabled, everything you try that seems like it should work will fail.
    2. You must use the new style VRF definition commands, the old "ip vrf <name>" commands are for IPv4 only. The new style of configuring the VRFs is "vrf definition <name>", under these VRFs you must specify the IP versions you want to run with the "address-family ipv4" and "address-family ipv6" commands. Also the command to place an interface into these VRFs is slightly different as well. On an interface, you must use the "vrf forwarding <name>" command instead of the old "ip vrf forwarding <name>" command.
    3. For OSPFv3 instances, the VRF is defined after you enter the proccess by using the "address-family ipv6 unicast vrf <name>" command. OSPFv2 instances are still define the VRF at the same time as the process using the traditional "router ospf <proccess> vrf <name>" command.
    4. After you get this all configured the "show ipv6 ospf" commands will no longer work. You need to use the "show ospfv3 vrf" commands instead.
    I have attached a sample configuration of what I did. If anyone out there knows this better than I do, please correct anything I got wrong and/or add anything you think would be helpful. I would just like there to be a good source of info available for this subject, so people don't have to waste their time figuring this out the hard way.
    Best Regards,
    Greg

    Greg,
    Greate information.
    Thanks for posting This!!!
    Reza

  • VRF Issue on a 6500

    I have a 6500 with one VRF. I want traffic to pass from the VRF to the global switch through an IPS so I set up a point to point link through the IPS using two GBIC ports each assigned with an IP out of the same /30. One port is in the VRF and the other is not.
    While the VRF and global routing table both show the subnet directly connected, I cannot ping from one side to the other. I replaced the IPS with a cross over cable to rule out the IPS without any change.
    Is this traffic trying to pass over the bus?

    these r the 3 tables which r connected to ur view - T882,T001,T001Z
    if u want data based on some join on these 3 tables then put a join in ur code on these 3 tables and then fetch ur record..if u want datra specific to one table only then u can directly select tht frm a single table..
    amit

  • OSPFv3 issue on a subif associated with a VRF

    Hi,
    I am trying to virtualize router and physical interface to test daul stack topology. This is one of my test 1841 routers which is failing enable OSPFv3 on a subif associated with a vrf while ospfv2 works fine with IPv4
    interface FastEthernet0/1.59
    encapsulation dot1Q 59
    vrf forwarding TEST
    ip address 172.18.58.18 255.255.255.240
    ip ospf cost 200
    ipv6 address 2001:DB8:BABE:59::2/64
    end
    Router(config)#int f0/1.59
    Router(config-subif)#ipv
    Router(config-subif)#ipv6 os
    Router(config-subif)#ipv6 ospf 1 ar 0
    % OSPFv3: not supported on VRF interface
    Router(config-subif)#do sh ver
    Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.1(4)M2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Mon 26-Sep-11 15:48 by prod_rel_team
    ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
    Router uptime is 9 minutes
    System returned to ROM by reload at 04:11:11 UTC Tue Nov 15 2011
    System image file is "flash:c1841-adventerprisek9-mz.151-4.M2.bin"
    Last reload type: Normal Reload
    ===XXX====
    Any suggestions here???.
    Thanks
    Ramu

    Hi Ramu,
    As indicated by the error message, OSPFv3 VRF-Lite is not supported yet. Only BGP and static are available. Please work with your Cisco representative for road-map information.
    HTH
    Laurent.

  • Reroute some vrf traffic between 2 sites over redundant link

    hey guys,
    We have a single client (in vrf) with 2 sites in different states and running over our mpls core.. Our primary link in our core is experiencing degredation of service and want to route this client over our redundant link while keeping all other clients going over our primary link - is this possible?
    The client in question has its own vrf (L3VPN) at both sites and is running over mpls between both sites. We want to re-route this particular client to take our backup path, while keeping everyone else between both sites going over the primary. We are not using TE, instead LDP to build MPLS.
    I don't believe this is possible to only re-route one client, however I thought I would ask the question.
    We cannot failover to secondary link for everyone between both sites because the link doesn't have the capacity.
    Thanks in advance.

    Hi,
    Using MPLS TE would certainly be an option. You would need to setup an MPLS TE LSP over the backup. You would also need to configure a separate lookback interface on each PE and use this loopback interface address as the next hop for the specific VRF
    ip vrf X
    bgp next-hop loopback 999
    ip route 255.255.255.255 Tu1
    This way you would make sure that only the traffic for this specific VRF would travel over the TE tunnel.
    Regards

  • Using LMS to extract VRF name as a variable from device config to deploy VRF name in additional configuration

    Using LMS is there a way to run a job which would extract the VRF name in part of the configuration and then use it as a variable to deploy additional configuration using the VRF name. We have a number of management VRF's and need to deploy a mass configuration change on a number of devices.
    aaa group server tacacs+ blah
    server x.x.x.x
    server x.x.x.x
    ip vrf forwarding test

    I am working for a service provider and I was given a task to configure more than 50000 devices (!). First I started with VBS and some scriptable terminal application, but it was too complicated to handle that much data. I then decided to develop my own application dedicated to device mass-configuration. As I understand your question, you may also find it useful : http://www.prettygoodterminal.com
    BR 

Maybe you are looking for