ORCL Failed to connect to database instance: Closed Connection.
Hi all,
i am getting ORCL Failed to connect to database instance: Closed Connection, on my work environment but when i look into the database it is ok more over this ticket is generated from GridControl , i checked in trace-file but i haven't got any clue what to do in this case please any one help me on this why it is giving this kind of error
(ORCL Failed to connect to database instance: Closed Connection.)
Thanks
venkat
Edited by: madala03 on Apr 10, 2013 3:32 AM
Hi ,
thanks for the reply i checked in listener log , havent got any connection errors but in sqlnet.log
i got this
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 10-JAN-2011 12:08:29
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Similar Messages
-
HI Experts,
Today i got this alert from oem grid during RMAN bakcup of the PROD database.when i try to connect the database i am able to get into to the DB successfully with out any issues.
But i am not sure why this error has come and resone behind that.Please advise.
From: Oracle OEM [mailto:[email protected]]
Sent: Tuesday, February 22, 2011 11:21 PM
To: DBA_GROUP
Subject: EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Target Name=PROD.test.edu.au
Target type=Database Instance
Host=delhi.win.test.edu.au
Occurred At=Feb 22, 2011 11:20:33 PM EST
Message=Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Severity=Critical
Acknowledged=No
Notification Rule Name=Database Availability and Critical States
Notification Rule Owner=SYSMAN
when i check the alertlog file i could see the following
Tue Feb 22 23:01:36 2011
Starting control autobackup
Control autobackup written to DISK device
handle '/oracledb/rman_backup/PROD/control_c-197342269-20110222-01'
Tue Feb 22 23:22:42 2011
Errors in file /oracle/admin/PROD/udump/hubprd_ora_27069.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at line 2
PLease let me know the cause of the issues and solution to overcome this issues.
Regards,
SalaiIt would appear that your archive location is full. If it is full, then try to get some more free space there by either deleting the old archives or specifying a different location.
I don't see any mention of a flash recovery area in the log message, but you may also want to confirm that you have reached your space allocated to the FRA. -
Connect to database instance PRD Failed
Hi,
We had refreshed our SCM quality system last month with production data, since then we are facing problem in BR connect operations like CheckDB, Verif DB, cleanup logs and update stats . When we schedule these operation using DB13 then we get an error "Connect to database instance PRD failed", but when try to run this manually by clicking excute immediately button then these operations complete succesfully.
Can you please help on this ?
Our version details are as below.
SCM 5.0
Oracle Release 10.2.0.2.0
Thanks,
ChetanProblems with the OPS$ mechanism? Check SAPNotes 400241 and 50088...
Also check the output of
> R3trans -d
use <sid>adm on os level...
GreetZ, AH -
OEM Grid "Failed to connect to database instance: ORA-03135
Hello all,
Did anyone know why we get the error in the OEM grid:
Failed to connect to database instance: ORA-03135: connection lost contact (DBD ERROR: OCISessionBegin).
We checked the listener and it is running fine. Can someone advice where to look? Thanks.Hello,
1. I tried to ping to the grid control server, and it was successful. However when reviewing the emagent.trc trace file, I noticed the following error:
SQL = "/* OracleOEM */ BEGIN :succ_sub := 0; dbms_aqadm.enabl"...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=mddbbanner8-vip)(PORT=1521))(CONNECT_DATA=(SID=PROD4)))
2009-01-13 10:44:31 Thread-4113849248 ERROR recvlets.aq: Error enabling user dbsnmp for aq agent mddbbanner8_3872_PROD4 on PROD.loe.corp_PROD4: ORA-06550: line 1, column 65:
PLS-00201: identifier 'DBMS_AQADM' must be declared
ORA-06550: line 1, column 65:
PL/SQL: Statement ignored
2009-01-13 10:44:31 Thread-4113849248 ERROR recvlets.aq: unable to create subscription on oracle_database PROD.loe.corp_PROD4
2. In the emdctl.trc trace file, I see these errors:
2009-01-09 15:54:26 Thread-4136655072 WARN http: snmehl_connect: connect failed to (mddbbanner8:3872): Connection refused (error = 111)
2009-01-09 15:54:26 Thread-4136655072 ERROR main: nmectla_agentctl: Error connecting to https://mddbbanner8:3872/emd/main. Returning status code 1
3. Anyone experienced the same errors from 1 and 2 above? Any solution to this issue?
Thanks. -
Failed to connect to database instance: ORA-12541: TNS:no listener
Hello -
This is the error in grid alert:
Failed to connect to database instance: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
But the test of connection string in database configure screen is successful. tnsping works too.
Grid version: 11.2.0.1.0, no patches.
Target database version: 10.2.0.2
Connect string: (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = s08) (PORT = 1528))) (CONNECT_DATA = (SID = S08) (GLOBAL_NAME = S08.WORLD)))
Any ideas?OK.. Are you testing the connectivity from "Preferred Credentials " setting page?
Try to configure target from
Targets-->databases--> then select your database and click on "configure" button.
Enter all the details and press "Test Connection" button once it shows that connection is successful go to next page and finally save the setting.
Let me know how it goes.... -
Enterprise manager is not able to connect to database instance
Hi
I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
But the problem is that, when I try to connect to database with EM, it says:
Enterprise manager is not able to connect to database instance . The state of the components are listed below.
Can anoyone help me?user10637311 wrote:
When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
"emca -config dbcontrol db -repos create". for these two cases istener should be running.
emctl start dbconsole -> to start dbconsole service
emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
emca -config dbcontrol db -repos create :
<last part>:
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-02-18_02-01-40-AM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
ils.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log:
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
ERROR at line 1:
ORA-20001: SYSMAN already exists..
ORA-06512: at line 17 -
About database's "closed connection"
i have stand a database called "TMIS",but now i can't start it ,after i put in the ID and the password,it always show me a message : "closed connection",i don't know what to do to help the "TMIS" start ,i tried many methods ,such as changing the listener.ora ,but it didn't help.
the service "TMIS" always showed the status "UNKOWN",I don't know the reasons to cause my database can't connection,here is my /etc/hosts and the listener.ora
#/etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#here 127.0.0.1, actually i change to my own ip address
#listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost.localdomain)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/product/9.2.0)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = TMIS)
(ORACLE_HOME = /opt/oracle/product/9.2.0)
(SID_NAME = TMIS)
###why there was another service called "PLSExtProc")
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "TMIS" has 1 instance(s).
Instance "TMIS", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
please help me solve this question ,i'm confused by this problem.
thank you very very much!!!
my email address is [email protected],please connect with me !!ORA-12705: Cannot access NLS data files or invalid environment specified
Cause: Either an attempt was made to issue an ALTER SESSION command with an invalid NLS parameter or value; or the environment variable(s) NLS_LANG, ORA_NLSxx, or ORACLE_HOME was incorrectly specified, therefore the NLS data files cannot be located.
Action: Check the syntax of the ALTER SESSION command and the NLS parameter, correct the syntax and retry the statement, or specify the correct directory path/values in the environment variables.
Set your NLS environment variable Correctly
SQL> show parameter nls
NAME TYPE VALUE
nls_calendar string
nls_comp string
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string BYTE
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
NAME TYPE VALUE
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_time_tz_format string
nls_timestamp_format string
nls_timestamp_tz_format string
SQL> -
Not able to connect linux database instance in another machine
Hi,
I have installed oracle 10g database server in Linux, and i created one database instance. and i have added tns entry and listener entry.
I am to connect the database on that machine. but not in different machine. i am able to access/ping linux machine in another machine also.
while creating tns entry for linux database instance in another machine using "netca" i am getting this error.
Connecting...ORA-12560: TNS:protocol adapter error
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
I verified listener and tns entry ( i think for this listener configuration is enough) also. and database is up.
If anybody knows why i am not able to connect linux database in another machine. is there any network configurations other than listener configuration.
Thanks in advance.yes i tried to connect with ORACLE_SID, its successful. and using tnsname like you said.
Instead of using netca to create the tnsnames.ora entry on the second server, copy the tnsnames.ora entry from the DB server. Then use tnsping to test connection :-i done above but not able to ping the tns name, i am getting this error.
TNS-12560: TNS:protocol adapter error
------------------------------------------------ -
Failed to connect to database instance: ORA-02002: error writing to audit_t
I have a 4 node cluster and getting this alert very ferquently...
checking audit_trail gives this error
SQL> select count(*) from dba_audit_trail
2 ;
select count(*) from dba_audit_trail
ERROR at line 1:
ORA-01115: IO error reading block from file 1 (block # 108673)
ORA-01110: data file 1: '+DG_PROD/ngprod/datafile/system.258.665846277'
ORA-15081: failed to submit an I/O operation to a disk
Documentation on error says.........
ORA-02002: error while writing to audit trail
Cause: The auditing facility is unable to write to the AUDIT_TRAIL table. If this error occurs, SQL statements that are currently being audited may also fail. This error will occur if the SYSTEM tablespace runs out of disk space.
Action: Add space to the SYSTEM tablespace or delete rows from the AUDIT_TRAIL table. If these operations fail or do not eliminate the problem, shut down and restart Oracle with auditing disabled. This is done by setting the initialization parameter AUDIT_TRAIL to FALSE.
How should I check the system tablespaces ...I'm getting the error....and moreover they are autoextendible....Any idea about the issueYou can check the space available in any tablespace with a query from dba_free_space;
Give serious consideration to moving AUD$ out of the system tablespace. Theoretically you can not do this prior to database 11.1.0.7 (where you can use the built-in package DBMS_AUDIT_MGMT.MOVE_DBAUDIT_TABLES). But if you open an SR at metalink they will instruct you to do it manually which keeps everything legal and supported.
http://www.morganslibrary.org/reference/dbms_audit_mgmt.html
Also look into using resumable transactions (DBMS_RESUMABLE) to keep these things from happening in the future.
http://www.morganslibrary.org/reference/dbms_resumable.html -
Unable to connect to Auxiliary instance using connect string
Hi All
I am trying to setup Data guard on 11G Release 2 OS : OEL 5.4. I have to connect to the auxiliary instance using rman. But i am getting following error.
>
[oracle@vm4dg ~]$ rman
Recovery Manager: Release 11.2.0.1.0 - Production on Mon Apr 29 19:25:13 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/orcl123@melbourne
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04006: error from auxiliary database: ORA-01031: insufficient privileges
>
I have tried the solutions like all service name in listener.ora to be in upper/lower case.
Thanks
AnkurHere's what you asked for
On primary
>
[oracle@oel54gen ~]$ rman target sys/orcl123@London auxiliary sys/orcl123@melbourne
Recovery Manager: Release 11.2.0.1.0 - Production on Mon Apr 29 19:50:09 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: LONDON (DBID=3149285088)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04006: error from auxiliary database: ORA-01031: insufficient privileges
>
for sqlplus on primary
>
[oracle@oel54gen ~]$ sqlplus "sys/orcl123@melbourne as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Mon Apr 29 19:52:13 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
Enter user-name:
>
for sqlplus on Standby
>
[oracle@vm4dg dbs]$ sqlplus "sys/orcl123@london as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Mon Apr 29 19:53:42 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
SQL>
>
One more thing is that i have two oracle homes on each machine. And listener are running from grid home
Thanks
Ankur -
How to connect oracle database using DB connect in SAP BW
hi all,
I have been provided with following parameters
Environment
DB Server
SID
Port
DEV
xyz.hou.abc.no U246M
10006 ---> ABC
I went in DBCO to create a new database connection
DB Connection - ABC_NEW
DBMS - ORA
User Name - User Name
DB password - DB password
Conn. info - ????
can anyone please guide what would be the connection info? i have seen other posts mentioning TNS alias but not sure what that is?
can anyone exactly guide on what would be the entry on the field connection info?
thanks in advanceHere is one way...
http://jakarta.apache.org/commons/dbcp/ -
Uable to connect to database with new connection
we are not able to connect to DB using SQL DEVELOPER with new connection,exiting connects works fine and sql plus works fine as well.
anybody has any information u.
Thanks
RKThank you very much for reply.
Sql developer version: 1.5.1; oracle db is 10.2g.
existing connections we are connected thru SQL Developer itself before couple days back. if you close and try to reconnect it is just kept running runinng.
our connections use SID,port no, host name, we are not using the Tns.
Thanks in advance
RK -
Ent. Manager is not able to connect to the database instance. ORA-12541
Hi
I have installed and configured Oracle 10.2.0.1 on a Microsoft Cluster with Windows 2003 Server.
Database instance and listener are running OK on both cluster nodes.
On one of the nodes (pwmssrv1) I configured Enterprise Manager to monitor and control the database.
At the beginning it worked fine, but after making a reboot on this server the Enterprise Manager cannot see the database instance and listener anymore.
I already recreated/reinstalled EM and the problem persists.
When I try to access the Oracle EM I get the errors (it do not show the login page):
Database Instance
(it shows the red down arrow)
Host pwmssrv1
Port 1521
SID WMS10
Oracle Home C:\oracle\product\10.2.0\db_1
Listener
(it shows the red down arrow)
Status Down
Host pwmssrv1
Port 1521
Name FSLEFA_BOCWMS_ORA
Oracle Home C:\oracle\product\10.2.0\db_1
Location C:\oracle\product\10.2.0\db_1\network\admin
Details TNS-12541: TNS:no listener
Agent Connection to Instance
(it shows the red down arrow)
Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach)
If I do the "emctl status dbconsole" it shows:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://pwmssrv1.BOCWMS.COM:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory C:\oracle\product\10.2.0\db_1/pwmssrv1.BOCWMS.CO
M_wms10/sysman/log
I also look into the logs and it shows a few errors (emoms.log):
2010-02-22 17:09:49,000 [HttpRequestHandler-9300338] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
2010-02-22 17:09:56,000 [HttpRequestHandler-22569956] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2010-02-22 17:09:56,000 [HttpRequestHandler-22569956] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
2010-02-22 17:09:57,000 [HttpRequestHandler-22569956] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
2010-02-22 17:09:57,000 [EMUI_17_09_57_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
Can someone help me on this problem.
Thanks in advance.
JoseYou need to do some troubleshooting to find exact issue...
Here are some metalink notes,
How to Verify Agent Connectivity to 'OMS and Repository' Target using emrepresp.pl [ID 472292.1]
--Database Status Shows Down Getting Error "Failed to Connect to Database Instance: ORA-12541: TNS:no listener " [ID 402227.1]
--Error While Configuring the Database from the Grid Control Console [ID 750621.1]
Hope this helps,
http://www.oracleracexpert.com/
Oracle RAC Load balancing and failover
http://www.oracleracexpert.com/2010/01/oracle-rac-load-balancing-and-failover.html
Download Oracle Grid Control and ASMLib and Install
http://www.oracleracexpert.com/2009/08/download-oracle-grid-control-and-asmlib.html -
10g RAC database: instances fail after a few days...
Im afraid I'm new to Oracle, so assume total ignorance when replying!
We have two servers, db1 and db2 running Oracle under Windows 2K3 web edition [SP1].
Both have a shared Direct Attached Storage disk, over a Scsi fibre connection.
The database is set up using instructions found online for RAC.
Either instance will stop, and the other will take over, after a few days. The problem is, we aren't using the database yet. [There isn't a problem with it, the development people have checked that they can use the database.]
The two errors [found using the EM console] which seem to be relevant are:
'Metrics "Database Time Spent Waiting (%)" is at 100 for event class "other"'
and 'Failed to connect to database instance ... TNS no listener'.
[Which is obvioulsly the failure]
I have scoured the web, and the rather dense reference books for Oracle I have access to, and to no avail.
Another contributing factor is the 'WMI Performance Adaptor' stops and starts on both machines every thirty seconds.
Any response/guidlines/advise would be greatly appreciated.
Apologies if I have started this thread in the wrong place!
James
Spelling errors - Message was edited by: jmorseTada, it failed at 4am last night.
Below is the bottom half of the log file.
2005-09-05 15:27:57.796: Attempting to start `ora.gandlake-db2.ASM2.asm` on member `gandlake-db2`
2005-09-05 15:28:04.703: Start of `ora.gandlake-db2.ASM2.asm` on member `gandlake-db2` succeeded.
2005-09-05 15:28:04.921: Attempting to start `ora.x200.x2002.inst` on member `gandlake-db2`
2005-09-05 15:28:33.359: Start of `ora.x200.x2002.inst` on member `gandlake-db2` succeeded.
2005-09-05 15:28:40.578: Start of `ora.x200.x2001.inst` on member `gandlake-db1` succeeded.
2005-09-05 15:28:40.609: CRS Daemon Started.
2005-09-05 15:28:41.140: Attempting to start >`ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1`
2005-09-05 15:30:06.078: Start of `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1` succeeded.
`ora.gandlake-db1.vip` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-06 19:48:35.703: Attempting to stop `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-06 19:48:36.250: Stop of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
Restarting `ora.gandlake-db1.vip` on `gandlake-db1`
2005-09-06 19:48:36.312: Attempting to start `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-06 19:48:38.843: Start of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
Successfully restarted `ora.gandlake-db1.vip` on `gandlake-db1`
`ora.gandlake-db1.ons` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-06 22:59:36.875: Attempting to stop `ora.gandlake-db1.ons` on member `gandlake-db1`
2005-09-06 22:59:38.218: Stop of `ora.gandlake-db1.ons` on member `gandlake-db1` succeeded.
Restarting `ora.gandlake-db1.ons` on `gandlake-db1`
2005-09-06 22:59:38.296: Attempting to start `ora.gandlake-db1.ons` on member `gandlake-db1`
2005-09-06 22:59:40.109: Start of `ora.gandlake-db1.ons` on member `gandlake-db1` succeeded.
Successfully restarted `ora.gandlake-db1.ons` on `gandlake-db1`
`ora.gandlake-db1.vip` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-08 04:47:35.078: Attempting to stop `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-08 04:47:35.734: Stop of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
`ora.gandlake-db1.vip` ran out of restarts on `gandlake-db1`
`ora.gandlake-db1.vip` failed on `gandlake-db1`, relocating.
2005-09-08 04:47:35.875: Attempting to stop `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1`
2005-09-08 04:47:36.718: Stop of `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1` succeeded.
2005-09-08 04:47:36.765: Attempting to stop `ora.gandlake-db1.ASM1.asm` on member `gandlake-db1`
2005-09-08 04:47:37.390: [RUNNABLELISTENER:4648] state change aborted (locked): ora.x200.x2001.inst
2005-09-08 04:47:44.578: Stop of `ora.gandlake-db1.ASM1.asm` on member `gandlake-db1` succeeded.
2005-09-08 04:47:44.625: Attempting to stop `ora.x200.x2001.inst` on member `gandlake-db1`
2005-09-08 04:47:46.531: Stop of `ora.x200.x2001.inst` on member `gandlake-db1` succeeded.
2005-09-08 04:47:46.625: Attempting to start `ora.gandlake-db1.vip` on member `gandlake-db2`
2005-09-08 04:47:50.203: Start of `ora.gandlake-db1.vip` on member `gandlake-db2` succeeded.x200 is the name of the database, there are two instances in total, db1 and db2. The company name is 'gandlake', and the machines are called 'gandlake-db1' and 'gandlake-db2'.
Thanks again. -
Failed to connect to database ONLY at the first time
Hi all, I installed Discoverer 10g version and I'm using an Application User to connect to the server where's the Db is installed.
Every time I try to connect to the server with Discoverer Viewer or Desktop I have a curious behavior....
ALWAYS but ONLY the first time I try to connect I have the following error :
- Failed to connect to database - Unable to connect to Oracle Applications database: invalid username/password.
If I try to re-connect again the second time it works perfectly !!....so, I think, there's nothing related with my .dbc file.
I tried also to write the ':' at the end of the user name....but it didn't work.
Into the pref.txt file doesn't exist a parameter like DefaultUserTypeIsApps to set....
Anybody have had the same "strange" behavior and found a solution or workaround ?
Thanks in advance
AlexThanks for your answers first of all !
At the end I found the solution looking at the Note:307167.1 on Metalink:
Discoverer Plus 10.1.2 Fails with ORA-1017 Error On First Login Attempt Then Works On Second Attempt
This note is very useful but into the solution the point 3 is not correct !
3. Modify the servername parameter to indicate the fully qualified servername.domain
Example:
An httpd.conf setting of: ServerName my_servername.mydomain.com should match a Discoverer Plus URL like http://my_servername.mydomain.com:7778/discoverer/plus
I had this problem both with Viewer and Plus...so instead to change the server name parameter (into the Apache/Apache/conf/httpd.conf file) with my complete URL (http://gnvdev.ote.gr:7779/discoverer/plus), I just write my right server name:
Example
After the installation of the Discoverer 1og server, into the httpd.conf file it was written automatyically: ServerName gnvdev
I just modified in ServerName gnvdev.ote.gr and both Viewer and Plus started to work perfectly at the first time.
I hope that this hint will be useful for you and others in the Discoverer forum !!!
Best Regards
Alex
Maybe you are looking for
-
Is it possible to close all apps in one one click?
Is there a simpler way of closing all apps on your iphone than doube-clicking the home button and then closing each one individually? I don't see a "close all apps" option anywhere. Sometimes I find myself with 20 apps open all at once and it's tedi
-
Calling a page after creating a primary key?
Hello, I have a form on a table with a create button on it. The primary key is created after I click the CREATE button, and brings me back to the report which shows my new record. Everything is fine here. Now, I want to branch to a new page (after pr
-
My itouch is stuck in recovery mode after I attempted to restore it
, the restoration progress bar doesn't move and I'm unable to shut down my mac book or use my itouch, my itouch is not jailbroken, please help!
-
Charts are not showing up in WEBI after the SAP Integration
folks, I have successfully iinstalled the following BOBJ XI R3.1 Java version Crystal Reports 2008 with SP1 Xcelsius 2008 enterprise SAP GUI Java Connector
-
Powerpoint transitions in Captivate
Hi Hopefully someone may be able to help with a quick query. I have Captivate 5 (with latest updates) and also Powerpoint 2007 on one PC and Powerpoint 2010 on another. I'm trying to upload a PowePoint document to Captivate which has been created i