Order 23 is not a capital investment measure for Asset accounting(AUC)

Dear All,
Help This Error
For T Code Ko02 select order for AUC getting this error
Order 23 is not a capital investment measure
Message no. AY097
Diagnosis
Object concerned: Order 23 .
The object is not an investment measure, either because there is no investment profile entered for it, or the indicator "manage asset under construction" is not set in the investment profile.
System Response
Processing is not carried out.
Procedure
If you want to create assets under construction for the object, then enter an investment profile in the master data for the object.
Check if the the indicator "manage asset under construction" is set in the definition of the investment profile.
Replay solution ASAP
Regards
Nag
Edited by: Nagaraju Chagonda on May 24, 2011 1:18 PM
Edited by: Nagaraju Chagonda on May 24, 2011 1:19 PM

Hi Nag,
Please check if correction note 1165656 is valid to your release. It can correct this error.
Best Regards,
Vanessa.

Similar Messages

Creation of Assets for Capital Investment Measure

Hi,
Can some please tell me how to create an Asset for Capital Investment Measure.

Hi,
First you have to create master data using asset class AuC.
You have define asset class for Capital Investment Measure (AuC class) in t-code : OAOA. And still in the same t-code (OAOA), you choose "investment Measure" in box "Status of Auc".
If you choose "Investment Measure", the assets under construction in this asset class can be created solely in relation to capital investment measures (internal orders or WBS elements). So you cannot create and post in Asset Accounting directly (Example post using t-code : F-90).
If you use WBS Elements then you can post to the asset for Cap Invest Measure using t-code : CJ8G or CJ88.
Hope it can help.

Cj88结转报错:You have not yet settled all items from capital investment measure

通过cj88把工程成本结转到在建工程时候系统报错
：You have not yet settled all items from capital investment measures from the previous year.
我看了下对应的wbs 2008年的工程成本都没有结转。
如何才能结转以前年度的工程成本呢
cj88上面的几个参数结算期间，记账期间会计年度分别对应什么意思
比如我现在要结算2010年8月的工程成本那对应3个栏位就是 08 08 2010
那如果我要结算2008年工程成本三个参数应该填什么

你好
如果会计年度2008在财务一侧已经关闭的了话，是没有办法我转结2008年以前的工程成本的。这种情况下，只能把报错信息AW624的状态从报错改成警告，然后把以前年度的工程成本转接到当前年度。详细的步骤可以参照SAP note 82514 和 425601.
希望上面的回答会对你有所帮助。
George

MobileMe/iCal Error: "The server has not specified a calendar home for the account at..."

Hi everyone,
I get a problem when trying to add my MobileMe account in iCal. The error message I receive after trying to add ("+") my MobileMe account to iCal is:
"The account information was not found. The server has not specified a calendar home for the account at "/ -- https://cal.me.com/".
Attached the screenshot: http://grab.by/cPDP
Any idea's on what could be going wrong?
Thanks,
Michael

Hi everyone,
I get a problem when trying to add my MobileMe account in iCal. The error message I receive after trying to add ("+") my MobileMe account to iCal is:
"The account information was not found. The server has not specified a calendar home for the account at "/ -- https://cal.me.com/".
Attached the screenshot: http://grab.by/cPDP
Any idea's on what could be going wrong?
Thanks,
Michael

Trying to send a meeting request in Outlook 2010. Error: "the meeting is not in the calendar folder for this account. responses to this meeting will not be tallied

Trying to send a meeting request in Outlook 2013 Error: "The meeting is not int he calender folder for this account. responses to this meeting will not be Tallied.
Please let me know what should I do?
I have set the account as default what should be my next step?

Hi,
Please try the following points to narrow down the issue:
1. Please check whether the default Calendar folder is checked when you created the meeting request and sent it out.
2. Please check whether there is any shared calendar opened in your Outlook and the meeting request is created on behalf of the shared calendar instead of your own calendar.
3. Create a new Outlook profile and create a test meeting request to have a try.
Additionally, here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/b9e9e47c-13f2-4522-a0c4-14a4371e740c/trying-to-send-a-meeting-request-in-outlook-2010-error-the-meeting-is-not-in-the-calendar-folder?forum=exchangesvrclientslegacy
Regards,
Winnie Liang
TechNet Community Support

Install Business Content for Asset Accounting

Hi All
I am not able to install business content for Asset Accounting. I collected oFIAA info area with data flow before and afterwards and mode automatic. I checked the boxes for info objects, DSO multi providers etc and clicked installation and transport so as to get a transport request which I want to transport to production if all is well. It is prompting for a request which is already present and not allowing to change. I cancelled this process, created a new request in transport organizer and assigned the installation to this request. But afterwards it again prompted for the previous request and I aborted the process. What should I do to install the content as I don't want to transport a previous request since I didn't create it and I don't know what will happen if I transport. Sorry for the long story.
Regards
Subin

Some objects were already locked in the request , that could be the reason why It was prompting previous request number
Goto that request in SE09/SE10 - Remove the objects from the tasks or
Goto SE03 - Unlock Objects (Expert Tool) - enter request number and unlock all the objects from the request
Now goto Bus.content - Install and when it prompts for request enter new one
Note : I would suggest you to remove all the unwanted objects from old request though they are unlocked , In future it will be a problem if someone tries to use that request , or change description to do not transport so will people will think about this request not to use and transport

Error - No GL account selected for Asset account in Business partner master

Hi Experts,
Scenario - While adding A/P Invoice for Asset item, the error "Error - No GL account selected for Asset account in Business partner master Message (3518-13)
Awaiting your replies
Regards,
Sid

Hi,
You need to map the control account of that vendor(business partner).
->Open the respective Business Partner master data
->Under accounting tab
->Under General tab
->Control accounts (will be indicated with ... button),on opening this
->You will be prompted to map the control accounts
                                         ^ Down Payment Payables
                                         ^Assets Account
                                         ^Open Debts
Here you need to map the Asset account which also must be a control account(control account option should be checked in the chart of accounts).
Pls do check in the test system,understand the behavior of this account by booking ap invoice and payment,then proceed in the live system.
Hope this is helpful

No G/L account selected for Asset Account in Business Partner Master Data

Hi All,
When i tried to raise A/P invoice for an Asset Item the system is raised the following error" why?
" No G/L account is selected for Asset Account in Business Partner master data "
thanks
SV Reddy

hi Giri,
When you choose from list against the Asset Account in the business partner master data it is only displaying the Trade Creditors Account domestic and foreign acounts only. which one to choose in this case? i presume trade creditors account is the one to choose. but what is the logic for asset items to choose this Trade Creditors Account? Or else can we create a separate control account for purchasing the Asset items? what is the logic again here choosing a separate account through option create new ?
thanks
SV Reddy

Step by Step process for Asset Accounting in SAP

Hi,
Please provide information pertaining to Step by Step process for Asset Accounting in SAP.
Regards,
Vikas Malhotra

chk these
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/71da17448011d189f00000e81ddfac/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIAA/FIAA.pdf

Standard report for Reconciliation report for Asset Accounting and GL

is ther any standard report for Reconciliation report for Asset Accounting and GL

hi
functional specification r reqired for this issue
regards
venkataswamy

Investment order field is missing in origin tab of asset master (AuC)

Dear Experts,
While creating an asset master (AuC), the Investment Order field is not shown for the input, in the Origin Tab. Whereas for Asset master for the other Asset classes are showing this field for the input.
Please advice how can I get this field in the asset master under AuC asset class.
Thanks in advance in anticipation.
An early reply is well appreciated and properly rewarded with points.
Regards
Preethi

Hi,
First check the asset Scr.layout rule for asset class by using path -
Spro>Financial Accounting>Asset Accounting>Organizational Structures>Asset Classes-->Define Asset Classes
Select your asset class and check - asset Scr.layout rule .
Then go to -
Spro>Financial Accounting>Asset Accounting>Master Data>Screen Layout-->Define Screen Layout for Asset Master Data
Click on - Define Screen Layout for Asset Master Data
Select your Screen layout which you got earlier. In Logical Field group select 'Inv. account assignment'. and double click on field group rule.Then make required changes in 'Investment Order' as required - Required, optional, display.
Then check asset master data in AS02.

Capitalization of AUC investment measure to asset

Hi,
I created a project and then settled corresponding WBS elements to AUC investment measure using CJ88.After that i am not able to capitalize to final asset.Please help me in procedure as I am not able to settle using normal line item settlement AUC as this is investment measure.

Hi Prad,
I am on 4.6C/D.
Please check on your settings for Capitalization of AUCs created through Investment Support Measures: -
1. Go to the IMG, Asset Accounting under Special Valuation and determine the Depreciation Areas you would like your Investment Support Measures to post to.
2. Still in Special Valuation, define an Investment Support Key and assign it to the relevant depreciation area
3. Also, define the relevant account determination for such posting under the Special Valuation
4. Proceed in the same area to define the Transaction type for the Investment Support Measure by changing any of the Standard ones in there in line with your requirements
5. Now move back to IMG, Asset Accounting then Master Data. Here you go to the screen layout and pick the relevant asset class for AUCs. Get this logical feild group and pick on the item Investment Support. Proceed to define its feild group rule as optional at the required asset maintenance level (Main Asset and/or Sub Level)
6. Leave the IMG and access the relevant AUC's Master Data from the User Menu. Click the tab Investment Support and insert the Investment Support Key you created in note 2 above
7. Now capitalise the AUC. Should work

HT203052 How do I delete an icloud account which uses an email account no longer in use - I do not have the the passwrd for this account

How do I delete an icloud account which uses an email account no longer in use - I do not have the the passwrd for this account

You will need the password. If you can't get it reset via http://iforgot.apple.com (if you remember the answers to the account's security questions then you should be able to reset it via them) then try contacting Support in your country, they should be able to reset it.
Contacting Apple about account security : http://support.apple.com/kb/HT569
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html

Plant and Cost Center are not displaying in FI doc. for asset scrap ABAVN.

Hi All,
When we do asset retirement by Scraping using Transaction Code ABAVN, Plant and Cost center are not appearing in the FI document. But, in the master data the Plant and Cost center are assigned for the particular Asset.
When I see the FI document display, the fields Cost Center and Plant are blank. Business Area and Profit Center fields are getting updated.
Can any one help me how to get this Plant and Cost Center in the posted document. Is there any OSS notes for this. I am using ECC 6.0 version.
Thanks in advance for your help.
Regards,
Rajesh

Rajesh
Aditional on me answer.
The systemtakes not the cost center from the asset you have to assign it in OKB9 or to fill in during this posting:
Steps
Click on Simulate, than you see the posting screen:
Click on the line (pk 40)
Click on Goto and Additional account assignment and fill in the cost center whatu2019s in the master record of the asset and post
An other option is to make a substitution to get this information

Business Object for asset accounting/capitalization

Hello frineds,
I need to develop a work flow to notify IO owner when IO status changes to RELEASED.
my workflow needs to be triggered once we save the internal order.
1) I am not getting any Business Object for this asset accounting. do u have any suggestion?
2) Can u tell me how to save the internal order through which my workflow is getting triggered?
My requirement is to use the transaction * CJ92 , CJ20N, ko02 or ko04 * for changing the IO status to released.
Thanks,
Romanch

Hi,
In the transaction KO02, U can find one tab Control data, In that Control data tab u can change the status to released.
Thanks and Regards,
Chandra M

Order 23 is not a capital investment measure for Asset accounting(AUC)

Similar Messages

Maybe you are looking for