Order can not carry revenues
Hi all,
we have a product cost colllector of RM01 type. we have a material say fg and a componet RAW. This product cost collector is for FG. we wanted to scrap RAW by 551 but in cogi it is showing error order can not carry revenues showing component RAW in the error.
Can you please help in this issue.
Thanks.
Edited by: s j on Jun 8, 2010 12:59 PM
Hi,
Check in the order type of the relevant order (via KOT2) whether the order can carry the revenues.
Regards,
Eli
Similar Messages
-
Order can not carry out revenues
Hi Experts ,
I was trying to release production order and got message no valuation variant is assigned . Even after assigning it in opn2 and reading PP master data it is showing same error .
Also while doing goods receipt ( MB1A ) I am getting error : Order 600003045 can not carry out revenues .
Please guide
Thanks
NealHi neal
As per controlling config. Planed cost has to be calculated during release are create of prod order. For that you have to assign costing carriant in OPL8. both for Plan and actual . in standard SAP PPP! is costing variant for plan and PPP2 is costing variant for actual.
For this costing cariant you have to assign costing type and valuation variant.
Please do it SPRO-Production-SFC-Integration-Order costing
Do these setting.
Standard valuation variant for PPP1 is 006 and for PPP2 is 007.
Regards
J. Saravan -
Services for Object in Maintenance order can not link
Hello,
"Services for object" in Maintenance Order can not link to share point.
Linking documents from the C drive or Global drive is successful but if SHAREPOINT is used, it fails
When trying to link to a Word document on our Sharepoint... It fails... when I'm in an order... it gives me an error... (displayed on the attached Word file...) and when I'm working within a document... (CVN02) it merely links to my C:\ drive which won't work...
We need to link to our "master" Sharepoint (web based) documents.
Please suggest the solution.
Thanks
Regards
AnilAnil,
Couldn't you add the web address as the attachment?
Regards
Narasimhan -
Sales order can not delete if it is free goods inclusive qty.
Dear sir,
I am unable to delete the sales order in the system.
This sales order has Free Goods items. Total order qty is 100 pcs. Main item has 98 pcs and sub item 2 pcs are free sending to customer with 0.00 net value.
When I deleted sales order only main item with qty 98 can be deleted. but sub item for 2 pcs can not deleted and below msg. appears.
Item 000021 may not be deleted (free goods inclusive quantity)
Message no. V1724
Can anyone please help in this regard. How to deleted sales order with free goods inclusing qty. Any copy control setting.
Please advise
nain b chandDear Durga Sana
No sir, I have deleted first main item. then second time tried to delete together and third time tried to delete from sales document then delete both but could not delete and same msg. is appearing.
Further please note this is return order created with reference of billing document.
We have created return order but now not need to further process.
Hence we want to delete this return order. In this case sub item as free goods can not delete and msg as marked above is appearing.
Any solution for this free goods item please SAP experts?
regards/nain b chand -
Purchase Requisition created from Maintenance Order can not deleted
Hi Gurus,
I've create a Maintenance Order for External Service (Control Key: PM02) and Purchase Requisition already created related to this Maintenance Order.
But when I want to cancel/delete the Purchase Requisition, there is error message "This item is only deletable via the associated production order". So II can not delete the PR.
Any solution for this problem ?
Regards,
Tri WHi,
If the PR has not been approved and no PO has been created yet, you have to delete the external service operation (PM02) in the work order. This should delete the Pruchase Requisitions.
Regards,
Joey -
Pr's Generated by PM Orders Can not be Change
The PR's generated by PM can Not be change or be used for a quotation. Does anybody Know anything about it.
Please if somebody can help me I will appreciate it.
Regards FernandoHi,
PR generated from PM orders can be changed only via PM order. Some one has to do the changes in PM order which will reflect in PR automatically.
Enjoy SAP .
Dont forget to give points if it useful ans.
Namskar,
Ketan Dave -
Help!! order can not be carried out
Hi all,
I am trying to create a shoping cart with a shop on behalf ID and when I press the order button I receive the following error message:
Line1: Partner Goods recipient not found
and below that there is a warning message that says:
The use of the last 5 characters in field CITY1 is restricted (38 of 40)
Do you know what is wrong here?Hi Maria,
For the warning message; proceed as it follows:
-TX SM30.
-V_T100C
-Application Area: AM.
-Generate an entry for Message 228 with value "switch off message" in the field Online.
For the topic around Partner Good recipient. Review User who you are shopping for. Try with another one in order to discard a general issue.
Thanks and Regards,
Abraham -
Purchase order can not partial receipt
HI Experts,
When i am make gr for Account assigned (K) purchase order.i am getting below error msg
already the made the GR for 200 quantity
Po is created without material no
Item 000010 is not relevant for goods receipt; increase quantity to 2,000.000 EA
Message no. BORGR634
Diagnosis
This item is not relevant for goods receipt. The quantity to be posted has to be the same as the delivery quantity.
It is not possible to post a partial quantity for this item.
Procedure
Increase the quantity of this item until it equals the delivery quantity.
Please suggest
Regards
VRHi,
Already Goods reciept is over against this PO.
You can check this by
me23n -> Item level -> Purchase order history -> click on Material doc.
Regards
R -
SALES ORDER CAN NOT BE LESSER THEN POSTING DATE
Hi everyone
Can any one tell how can I restrict sales delivery date less then posting date. Like if user create a sales order on 22,03.14 then delivery date should not be before 22.03.14. I saw in system if I enter sales delivery date before 22.03.14 then system accept the dateHi,
Try this:
IF @transaction_type in ('A') AND (@OBJECT_TYPE='17')
BEGIN
If exists (SELECT t0.docentry FROM ORDR T0 WHERE T0.[DocDueDate] < T0.[DocDate] and T0.DocEntry = @list_of_cols_val_tab_del)
Begin
SET @error = 10
SET @error_message = 'Not allowed to enter delivery date less than posting date'
End
End
Thanks & Regards,
Nagarajan -
Production orders can not be processed by finance after TECO
Hi,
For past few months the production orders that are TECOu2019d but cannot be processed by Finance because they get a message that the settlement rule has not been satisfied.
When we look at the production order the settlement rules showing confirmed. To fix this issue, manually we enter settlement rule and delete the previous one.
What can be the problem? whatshould I do to fix this issue permanently.
Jayesh
SAP PPHi,
it is sure issue with settlement profile ,u select into order type dependent parameters,
For normal order settlemnt is done against material account, i.e.debit & credit at material consumption account,
for rework order ,settlement is against cost center,
Pl. check what u select into settlement profile.
Regards,
Devendra -
Stock Transfer Order - can not PGI
Dear experts,
For intercompany STO :
On our process we create STO type NB
We create delivery ->VL10G -( delivery type NL),
Then on VL02N do Picking
When try to PGI on VL02N got the error message:
M7 153- Purchase order 4500014669 does not contain items for a stock transfer
Please advise where is the problem
Warm regards,
MosheHi
Check the following
What is the document type used in PO? is it a intercompany document type. In general 'NB'
Have you assigned the delivery type NLCC to plant in SPRO
Check this out.
Regards,
Raman -
PM - MM order can not be completed due to purchase order commitment
Hi
The error "There is still a purchase order commitment for ORD XXXXX" comes up when I try to complete an order in the transaction IW32. I pressed the cancel button then the information box comes up with the text "Order has status "technically completed"". I checked if there is any open PO assigned to this PM order. Yes there is one which was already GRposted and invoiced in 2006. Final invoice indicator has been set too.
I would appreciate a lot if you can help me regarding how to complete this order? Is it a program error.
Regards,
EsraHi Thyagarajan
I checked the operations in the PM-order. There are two external processing operations. One has an aggrement which has the validity end 2005-12-31. I don`t see where to see if the other operation is assigned to a purchasing document. In the menu path, extras, cost reports there is a PO which was already invoiced and GR-posted.
I don`t know where to look for more if there are any open purchasing documents?
Thanks.
Esra -
Why my order can not be processed ?
Hi
My company is in Singapore, i buy the Photoshop plan for my using while i am in abroad (vietnam) with company credit card (singapore card). But it does not work. My order is always in error and asking me to contact customer service. I have tried many times already.
Pls advise me what to do to fulfill this order.
Thanks and Regards,
Phuc Nguyen ThienVerify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html -
Hi all,
when I have changed a program at production side that is already being used in live systems, it asks me request to change the code, I create new one and want to carry this into live system;
however I cannot, it just says it has been released and now the lock of the object has gone(something like that), but I cannot see it at<b> stms</b> transaction side; what is the problem?
Thanks.Hi!
Mostly the transport routes are defined this way: developer system -> quality control system -> production system.
If you modify a program in the productive system (which might NOT happen in most common), it will ask you for a new transport request, but because this system is the last in the line, it will go nowhere. Modifications will be live immediately after the activation.
Regards
Tamá -
HI
while doing goods receipt (MB31) i am getting following error msg.
Order 1000001 cannot carry revenues
Message no. KO014
Diagnosis
You have tried to post an order, which is not allowed to carry revenues, under a revenue element (or the system determined the order automatically).
The field "Revenues" in the order type determines whether revenues can be posted to an order or not. Orders carrying revenues cannot be settled to a cost center.
System Response
Order 1000001 cannot carry revenues.
Procedure
You can either
Please help me out
points would be rewarded.
Nilesh
enter a different order.*
enter a different cost element (not a revenue element).*Hi,
Please check the cost element category in KA02. it should be 11. the goods for the material you are doing, the affected cost element should be categorized as 1 which is part of material cost.
Regards,
Jigar
Maybe you are looking for
-
Using XQuery I'm trying to dynamically create attributes as the result of a complex for statement. This works fine: <tag attributeName="{ for ...}" /> and I could just repeat this for every attribute. However the "for/where" statements are complex an
-
How to list table name of src db?
hi all: I debug a mapping , 1) owb warnning: can not find source; 2) I click "edit" button; 3) owb show a new window,I click "browser" button; 4) I choose a source datebase link so owb should list table name of src db, but owb don't list table name o
-
Problems reducing quote level when forwarding.
In Mail, under the Format menu, there is a selection "Quote Level". Under that there are selections for "Increase" and "Decrease". Early on with OS-X, decrease quote level worked sporadically (sometimes). Now it doesn't seem to work at all. I have my
-
because of my operating system I cant update all of the suggested plugin updates
-
Error in jboss while deploying
12:49:57,181 INFO [MainDeployer] Starting deployment of package: file:/C:/jboss-3.2.1_tomcat-4.1.24/server/all/deploy/MyBank.jar 12:49:57,692 WARN [verifier] EJB spec violation: Bean : MySession Section: 22.2 Warning: The Bean Provider must specify t