Order cannot be delivered (see long text)

I am creating a delivery wrt sales order through VL01N.
but I am facing the below error:-
Order cannot be delivered (see long text)
Message no. VL461
And in the Display log,its is showing as :-
Order is incomplete - maintain the order
Can anybody suggest me,where the problem,bcoz I am a mm guy and not aware very well releated to SD.

In VA02 for reqd. sales order,in menu edit --> incompletion log or
press ctrl + f8 to find out incomplete entries,enter datas & save it.

Similar Messages

Delta DTP cannot currently be deleted (see long text)

I deleted all the requests..actually there is no data in the write DSO and I have not loaded the cube...I want to delete the DTP and create a new one.
Delta DTP cannot currently be deleted (see long text)
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.

That depends is your prod system open to create Infopackages & DTP if so you can do that..but this may require a change in the Process Chain as well to change the DTP if at all a process chain exists for the same.

Runtime error while executing rule - see long text RSTRAN 301

Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text     RSTRAN     301
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    The argument 'GBP' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
Maruthi

Guess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation

Order cannot be delivered

Hi Experts,
Please help. Basically PP consultant.
While doing delivery in VL01N I am facing following error.
Order cannot be delivered
Diagnosis
Possible reasons include:
The copy conditions specified in Specify copy control for deliveries do not allow the order to be delivered.
The order is blocked for delivery.
The order document is incomplete.
Procedure
Pay attention to any notes that may be recorded in the log.
You can display the copying requirements defined for this transaction in Customizing.
How to solve this.
Edited by: Raja S on Jan 13, 2009 7:13 AM

Hi Raja
Your assignment and all settings seems to be correct
There are a few checks
1.In CMR also pls check whether you have maintained delivering plant as 2222 in the shipping tab
2.In MMR have you maintained delivering plant as 2222 in sales org data 1 tab
3.In OVL2 have you assigned shipping pt as 2222 for the delivering plant 2222. shipping conditions 01 and loading group 0001
Are you seeing those entries?
Mainly in OVL2 are you seeing your entry
If all these are correct pls log off from SAP and relog after 1 minute and once again create the sales order
Make sure that you are putting the right customer and right material(by oversight there can be a mistake)
After inputting the material choose the line item and go to item details and check whether you are getting delivering plant as 2222 and shipping point as 2222 in the shipping tab automatically
It has to come automatically
If doesnt come automatically pls enter these manually and see any error comes and post that error msg
It has to come automatically ,not coming still throwing error means there is some program error only
_After seeing your error in the sales order
In t code OVL3 for your delivering plant, shipping pt,and storage conditions from MMR maintain the storage location as 0002 and then try
Regards
Raja
Edited by: ramanathan raja on Jan 13, 2009 5:37 PM

Can not see long text description of a characteristics in portal

Hi experts,
I designed two queries via Query designer and published them to portal but I can not see the the long text description of "Name" attribute belongs to 0BPARTNER characteristics.
One of the queries shows only the last name of partner in portal while it is showing full name and last name in Bex Analyzer. The other query shows only the key value in both portal and Bex Analyzer.
I want to see long text description in both queries.
For an additional information, I'm extracting data from CRM 5.00 to BW 7.00
What will be the reason for this and how can I solve it?
Can anyone help me for this issue, it's a kind of emergency situation.

Hi,
we have the same problem.
We want to change <b>only</b> in the screen variable the hierarchy text (from default to long\medium text) but even if there's a possibility to do this, really it doesn't happen anything - it' s possible when you start query, in the selection screen inside every the variable there's a command "User Settings" in which manage what you want to see (I put display custom, as text, medium text).
I try to do this also in query analizer, selecting variable (hierarchy) and enter in this (user setting), changing in display custom as text - medium text, but even if I save this settings, really doesn't happen anything.
It seems the system isn't sensitive to this selection...
By now, if someone has an answer, please write us!
Thanks in advance,
Alessandra Mirone

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Loaded data is not yet visible in Reporting (see long text) Message no. RSM

Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
Naveen

Hi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen

Loaded data is not yet visible in Reporting (see long text)

hello
all
I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D( 23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
as I solve this problem ?

Jurado,
What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
Probably if you look closely you would know the answer.
Goodluck,
Alex
(Arthur Samson)

Error occurred in derivation rule. See long text ; Message no. K/110

I am facing the below error when posting document in FI
Error occurred in derivation rule. See long text
    Message no. K/110
    CO-PA Characteristic Derivation
Diagnosis
    Step 0166 5400: Profit Center in Inventory Posting
    No derivation rule entry was found for the specified source values valid
    on 02.04.2014.
    The derivation rule was defined so that an error message is displayed
    when this occurs.
    The system could not find a rule entry valid on 02.04.2014 for the
    following source fields:
     Product Group
Procedure
     Create a rule entry for these source values and make sure that rule
     entries exist for all the source values.
     If you do not want the derivation to be performed in every instance, you
     can also change the derivation rule so that no error message is
     displayed if a rule entry is missing.
     Maintain entries
     Maintain derivation strategy
In KEDE:
In KEDR:
Please help me what might be the reason.

Hi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas

DataSource has to be replicated (time stamp, see long text)

Hi Experts,
in Production i am getting an error like below
DataSource has to be replicated (time stamp, see long text)
@5C@ Errors in source system @35@
Message no. R3016
Diagnosis
DataSource 8ZCRFAC03 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.04.2011 12:56:44.
The time stamp in the BW system is 19.04.2011 12:29:02.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
i replicated data source and activated transfer rules giving source system and infosource but still it is failing with same message
what went wrong not able to understand
Please help,
Thanks in Advance
Nitya

Seems to be an incorrect transport sequence:
1. First transport you DS from source system R/3 QA to R/3 Prd
2. Once it is successfully transported to R/3 PRD, Replicate DS in BI PRD
4. Now try to collect your infosource, DS, TR in transport request & try to transport it from BI QA to BI PRD.
5. Once it is successfully replicated in Production try Running the loads
It should work.
Regards
Raj

Error occurred in derivation rule. See long text, Message no. ABADR100,

Hi
I am making some testing and I have the following message , which is about the functional area. I did not use the FM derive:
Error occurred in derivation rule. See long text
Message no. ABADR100
Diagnosis
SAP - Original Generic 4.7 Ver: Funded Program fro
No derivation rule entry was found for the specified source values valid on 22.06.2011.
The derivation rule was defined so that an error message is displayed when this occurs.
The system could not find a rule entry valid on 22.06.2011 for the following source fields:
Financial Management Area/Functional Area
Z001/6000
Procedure
Create a rule entry for these source values and make sure that rule entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you can also change the derivation rule so that no error message is displayed if a rule entry is missing.
please help

Hi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas

System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

Hello all,
One of the users is trying to run a report in Production using BEx analyser and gets the following error.
BI Server error:
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
I have already run the SAP Note 1237190 but there is no use as the error comes up again.
Could any one please help to resolve this issue.
Thanks
Phani.

Hi Dipika
Thanks for the reply.
But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
This is not happening with all the users though.
Its a random problem only.
Thanks
Phani.

DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)

Hi,
We copied SCM production system to SCM quality system and after that I tried to run forecast process chain.
I got the following error message when process chain tried to extract sales history and failed:
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 8ABCD_K01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.12.2008 23:55:19.
The time stamp in the BW system is 01.07.2008 01:51:43.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Errors in source system
Message no. RSM340
I never did this activity (data source replication)before.I'll appreciate if somebody can help me and provide step by step process to how to do it?
Thanks
Kumar

Thanks for prompt respons Julien.
STEP1:
In SCM quality system, I went in RSA1-- > Infoprovider-> Data source->Right click there --->replicate metadata
got popup message :
Message no. TK730
Diagnosis
In this logon client, any changes to the Repository and to cross-client Customizing objects are prohibited.
System Response
The function terminates
Procedure
If you still want to make the changes, contact the system administrator, who can allocate you a user in a client where you can make the changes.
STEP2:
When I ran the program RS_TRANSTRU_ACTIVATE_ALL ,
entered source system : BW....CLNT...
Infosource : 8ABCD_K01
got following log :
No Transfer Structure Selected
Message no. RSAR051
Do I need to do run data source replication process in SCM developement and then trasport to quality? Is there any pre/post requisite or step i missed.
Thanks

"abort system error in program CL RSR and form GET_PROVID-02-(see long text

Hi All,
When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
"abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
System error in program CL_RSR and form GET_PROVID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Can anyone help me?
kumar.

Hi , could you please check note 1166294 and check if the issue will be fixed ?
1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
Thanks,
Walter Oliveira.

Could not start Layout Designer (see long text)

Dear All,
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Refer also to SAP Note 1121176.
Note : I have already checked forums and also the long text file , i have installed SAP gui 720 with latest patch even though , we are getting the same error . or i have to installed ADOBE LIFE CYCLE DESIGNER to user PC ?
Note :
One of the forum is mentioned ,we can also download and install the newest SAP GUI (what is 7.2 i believe) which has LCD as a part of installation.
but still i am getting error .
SAP gui Details :
SAP PC VERSION INFORMATION: saplogon.exe
MAIN MODULE INFORMATION:
   saplogon.exe
   SAP Logon for Windows
   720 Final Release
   7200.3.9.1071
   1286983
SYSTEM INFORMATION:
   Operating system: Microsoft Windows XP 5.1 (2600)
                     Service Pack 3
Kindly advise.

Please let me know the path and it can be used permanent ? or it will ne expired ?
Thanks
Edited by: satheesh0812 on Nov 29, 2011 12:17 PM

Order cannot be delivered (see long text)

Similar Messages

Maybe you are looking for