Order change vs. order status

Hi experts,
The Completion Rule for item category has been set as blank, why partial deliveries triger order status to be Completed? How to make order complete until it's completely delivered?
Case:
Aug 5 - create sales order A
Aug 5 - release credit block for order A
Aug 12 - create partial delivery
Aug 15 - change order price
Then, overall order status "completed", reject status "nothing rejected", delivery status "fully delivered", overall blocked status "not blocked", the confirmed quantity in the schedule line automatically shows the partially delivered quantity.
When creating another delivery for order A, the system pops up "No delivery-relevant items in order A, Message no. VL455".
Edited by: Cathy on Aug 20, 2009 3:41 PM

Hi Ravi,
Is it caused by the field "fixed date & qty"? This field defaults as checked. This is a MTS scenario. On Aug 5, the confirmed qty only can be confirmed against delivery date Aug 8 until credit block is released. After 2 partial deliveries, order A is changed price on Aug 15.
Pls correct my assumption as followings if I'm wrong. The change on Aug 15 trigers the similar "availability check" or "order update" again. Because "fixed date & qty" is checked, the total partial delivered qty only can be considered as the confirmed qty against delivery date Aug 8 on Aug 15.
If my assumption is correct. I wonder why "availability check" or "order update" can be carried out. U know, the schedule line category CP does NOT activate "availability check". I simulate the case in the test system (same server) but no such issue occurs.
Any advice?
Hi Chris,
I use the standard item category L2N for debit meno. As I cannot access the system now, I'll respond later.

Similar Messages

  • Order Change vs Order Display in VA05

    Does anyone know what would cause an R/3 originated order to open from a VA05 list in Change mode, while a CRM originated order would open from the same listing in Display mode? The orders are the for the same customer, and same order type, however they do not open the same way in R/3. Any ideas?

    Jami,
       By default you can't open orders in change mode, which originated from CRM.
      You need to make below settings in ECC CRMPAROLTP table.
    PARNAME     CRM_SCENARIO
    PARNAME2    INT_CHANGE_ORDER
    PARNAME3    <Sales Order Type>
    PARVAL1        A
    Even you need to follow settings according to the note 888665 to apply cross sytem locks.
    //Bhanu

  • Purchase Order changing Sales Order Number when printing.

    Hi all,
           I have a client who is trying to print a Purchase Order and when they go to Print or do a Print Preview the Sales Order number changes from 2259 to 2264. The customer is using SAP Business 1 2005A SP01 Pl43. If anyone has heard of this or can help us out that would be greatly appreciated. Thanks!
    Jeff Haldeman
    Support One

    Hi Jeff
    That sounds strange .May be it is a bug .lets find out some of the issue before you log to sap support or patch upgrade .
    1 Are you using formatted search . check the setup - if it is automatically refresh when field altered or changes,
    --If that's the case , change it into  display saved user -defined values .
    give a shot and see what happens
    Thank you
    Bishal

  • BAPI_SALESORDER_SIMULATE can be used in case of Sales Order Change?

    Hi All,
    I'm using FM 'BAPI_SALESORDER_CHANGE' to update sales order.
    It's working fine even multiful item (delete, add, changing item).
    But I need to give simulated information to SAP portal before changing Sales order.
    This 'BAPI_SALESORDER_SIMULATE' FM looks like for creating new Sales Order.
    Is there any other simulation BAPI FM for Sales order change?
    Thanks.

    Hi,
    You can use
    BAPI_ORDER_CHANGE_STATUS_GET   Change status for order                                                  
    BAPI_SALESORDER_CHANGE         Sales Order: Change Sales Order                                          
    Thanks
    Sarada

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • EXIT/ BADI/ Enhancement point for User Status change in Order

    Hi all,
    I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
    I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
    I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
    Thanks and Regards,
    Sonal

    Hi,
    Use this Enhancement IWO10009 and call these function module to change the User Status
    STATUS_TEXT_EDIT --> To Read the existing status.
    STATUS_CHANGE_INTERN_VB --> to change the status.
    Regards,
    Satish

  • I need To change the order status

    Hi Guru's,
    My application Version:11.5.9base
    My database Version:8.1.7.4
    In Order Management Super User--->Order organiser
    one Of my order Line Item showing status fulfilled. But status Is already Closed.
    Can you tell how to change the Status to Closed.
    regards,
    ***SBJ***
    Edited by: user13098774 on May 16, 2011 1:51 AM

    Hi
    In Oracle Order Management, I have ship confirmed a order, the order line status is staying at 'fulfilled' status and is not getting to 'Closed' status.
    please Give M e any answer .
    Regards,
    ***SBJ***

  • Possible to Change the Order Status

    Hai
    When i am booking the sales order the status is showing the Booked is it possible to change the Booked status according to the customer requirement ....
    thanks in advance
    M.Meenashi Sundaram

    Hai its possible to change the order status from the
    setup>quick codes>order management>
    type --flow status
    we can able to change it
    thanks
    M.Meenashi Sundaram

  • How to change Work order status ?

    Hi,
    I am using an ABAP program to change the user status of a work order to "CLOP" , This is like IW32 , Here Which function module I can use to do this ?
    Thank you for your help.
    Thanks

    Hi,
    You can use the FM 'STATUS_CHANGE_EXTERN' for updating the user status. and 'STATUS_CHANGE_INTERN for updating the system status.
    Hope this solves your problem.
    Regards,
    Hari

  • TO change the user status in the PM order

    Hi,
    My requirement is that a techician is assiged to do the work using MRS and based on that user status is update in the PM when the save button is clicked on the MRS board.
    Now according to my requirement if anybody click on the save button and the technician is assigned to do the operation is done through MRS than the User status in the PM order should get changed.
    As a part of standard functionality the user status is not updated.
    A new user status is created in the trasaction BS02.
    Can anybody please let us know how to achieve this functionality
    Thanks
    Mohit

    We had a similar requirement and this is what we did :
    1) Set up a task as a reciever for the WORKORDER SAVE event.
    2) In this task called a method of a business object.
    3) In the method called STATUS_CHANGE_EXTERN to change the user status.

  • How to get informed when PO / Contract changed to ordered / released status

    Hi,
    I am working on a program which sends SRM PO and Contract data to a non-SAP system, one of the requirements is to send SRM data immediately after PO / Contract's status changed to Ordered / Released ( workflow is used here ).
    I tried to used BBP_DOC_CHANGE_BADI, but noticed throuhg debugger that the last time this BADI get called, I still didn't see Ordered / Released status in the Status table.
    Is any way to know status change for PO / Contract ?
    Thanks a lot,
    Wayne Liu

    Hello Wayne,
    Solution 1:
    You can use the SRM Alert Mangament to know when a contract was released, specifically the following events RELEASED_AGAIN
    RELEASED_NEWLY.
    Check IMG Cross-Application Basic Settings-> Event and Event Schema for Alert Management
    For PO I could not find a similar event, but there is a APPROVAL_PROCESS_DOC_APPROVED event which can be used if the PO was approved after ordering.
    In any case you can create your own events and event handlers using the SRM Alert Management BAdi BBP_ALERTING.
    Solution 2: Only for Contracts
    You can use the existing Distribution mechanism to distribute contracts to Non-SAP systems.
    Distribution of contracts is triggered whenever significant changes are done to the Contract (like Release, Lock, Unlock).
    Implement function module NOR3_CTR_TRANSFER for this purpose.
    Edited by: Sushil Kumar on Mar 22, 2010 9:41 AM

  • CRM ORDER CHANGE AND STATUS MANAGEMENT - workflow

    Hi,
    We have created a Changed method for bus2000120 which is configured to fire when the Order is saved via Status Management.  We have added an entry to BSVW for the object, bus2000120.changed with no restrictions.  We have also created a function module that checks to see if the user status is E0005 or E0007 or it deletes the object from the Event table.  I see that this works correctly, however, a given SAVE of a transaction is firing 2 bus2000120.changed for the exact same user and system status.  (I know that it is firing 2 bus2000120.changed because I ran swels and swel. The event was listed twice. Please remember that the Event table when read directly after the save only lists bus2000120.changed one time.)
    There is only 1 entry in the event linkage(swetypv) for bus2000120.changed and it has a condition of the same user status, e0005 or e0007.  No real problem here, however, since there were 2 firings it runs the workflow twice.
    When you look at the extras-change documents you can see that the Header is changed twice, once for a system status and once for the user status.  I am assuming that since there are 2 changes, this is what is doing both firings.
    The funny thing is that if I fall into our custom code in debug where we are reading the status and event tables I only see bus2000120.changed.
    Any ideas on how I might solve this problem?  Do you believe I am correct in assuming that the 2 status changes to the header of the transaction is how both events are being fired?  If not, any guidance you might give would be greatly appreciated.

    see post stream, solved via sap note 1063138

  • Production order change status report

    Dear All,
    I created production order in PP. suppose I make changes in production order while confirmation i.e. i change prodn. order qty. 50 to 40 at stage 30(i.e. atrouting stage-- 3rd operation). From where i will get the status of this changes in production order qty ?
    I tried in TC: COOIS , but it shows changed qty. 40. I want the diff. 50 -40 = 10 which i have cancelled whilw prodn.confimation.
    Pl' reply....

    we r using strategy '30'. we can not use make to order strategy as our planning has flexibility. So we r creating production orders manually@ 8000 materials from excel to SAP (using BDC program). So there is no linking with sales orders and production orders.
    we r uploading material and qty. in mass to create prodn. orders manually.
    while prodn. orders confirmation of new plan , sometimes to accomodate spill (pending orders--incomplete orders of last month) we have to cancel some new prodn. orders.
    So how to cancel those and from which report i will get change qty. status?
    thanks.

  • Sales order as complete and change the delivery status.

    Hello All,
    We  produces an order but then the customer calls and does not want the material so we in turn will scrap the material against the production order using transaction MB1A mvmt type 951 E. 
    Since the material were scrapped and no material were shipped against the sales order, the sales order u201Coverall statusu201D remains open and the delivery status is u201Cnot deliveredu201D.
    To close the order  we u201CRejected line itemu201D and moved on.
    I would like to know if there is another way we can set the sales order as complete and change the delivery status. 
    Regards
    Amit

    Hello,
    you can use the status profile for the same. but a better way would still be to use the rejection reasons . the rejectionr reasons are very well integrated with the document flow as well as transfer of requreiemnts to Production
    so a best practise would be to use rejection reason
    hope this helps
    Thanks
    akasha

  • BAPI for changing Work order user status in IW32

    Hello Experts,
    I am getting Same Problem in updating status via BAPI, BAPI_ALM_ORDER_MAINTAIN.  Its not giving any error but even not update status.
    I know i can use this for changing the user status also but not sure how to carry out things.
    I used this code.
    fi_methods-method = 'SAVE'.
    APPEND fi_methods.
    fi_methods-refnumber = 1.
    fi_methods-objecttype = 'USERSTATUS'.
    fi_methods-method = 'CHANGE'.
    fi_methods-objectkey = '002000002453'.
    APPEND fi_methods.
    fi_userstatus-user_st_text = 'COMM'.
    fi_userstatus-user_langu   = 'EN'.
    fi_userstatus-change_event = ' 01 '.
    APPEND fi_userstatus.
    CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
      TABLES
        it_methods    = fi_methods
        it_userstatus = fi_userstatus
        return        = fi_return.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    Above code I am using and there the message comes like
    T ID                   NUM           MESSAGE
    S IW                   080           Order saved with number 2000002453
    S IWO_BAPI2     110           BAPI control was ended
    can any on know what is wrong in this? please help if having knowledge.
    Thank You,
    Jahnavee Trivedi

    I am getting Same Problem.
    fi_methods-method = 'SAVE'.
    APPEND fi_methods.
    fi_methods-refnumber = 1.
    fi_methods-objecttype = 'USERSTATUS'.
    fi_methods-method = 'CHANGE'.
    fi_methods-objectkey = '002000002453'.
    APPEND fi_methods.
    fi_userstatus-user_st_text = 'COMM'.
    fi_userstatus-user_langu   = 'EN'.
    fi_userstatus-CHANGE_EVENT = ' 01 '.
    APPEND fi_userstatus.
    CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
      TABLES
        it_methods    = fi_methods
        it_userstatus = fi_userstatus
        return        = fi_return.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    Above code I am using and there the message comes like
    T ID                   NUM           MESSAGE
    S IW                   080           Order saved with number 2000002453
    S IWO_BAPI2     110           BAPI control was ended
    can any on know what is wrong in this? please help if having knowledge.
    Thank You,
    Jahnavee Trivedi

Maybe you are looking for