Order Combination Vs Billing.

Hi Experts,
I Have done One delivery combining 3 sales orders having  same header data and Item data.But when I am doing billing against the same delivery system is processing 3 billing documents.How can I do One billing for this delivery. please provide me the  solution.
Thanks.
AKHIBHA.

Hi,
Please check split analysis in billing document for more details.  The below link would also help.
[Invoice split|http://help.sap.com/saphelp_46c/helpdata/en/dd/560f63545a11d1a7020000e829fd11/content.htm]
Regards,
P Gomatheeswaran

Similar Messages

  • Order combination - VOFM

    Hi all,
    As every one knows for many orders to combine in to single delivery it must have same Ship-to, shipping conditions, delivery date, delivery priority etc..........
    My doubt is that which requirements checks them because I checked  copycontrol between OR to LF and order combination requirement is 51 but This requirement determines if sales documents can be combined in one delivery document and only checks delivery type, sales-organization, full delivery rules, and billing type.
    My doubt is where  Ship-to, shipping conditions, delivery date, delivery priority are checked for order combination.
    I also have new client requirement to  check Schedule line date (arrival date) - (VBEP-EDATU), Sold-to Party (VBAK-KUNNR) and      Unloading point (LIKP-ABLAD) before combining  orders to single delivery  where can this logic be added. Is it in requrement 51?
    Please suggest
    Regards,
    Rathan

    My doubt is where Ship-to, shipping conditions, delivery date,
      delivery priority are checked for order combination
    Routine 051 at header level is programmed in such a way that it will look for VBAK (Header of the reference document) and LIKP (Delivery Header) .  So whatever header data in preceding document differs, it will create delivery split. 
    thanks
    G. Lakshmipathi

  • Report for Material Issued against Service Orders But not Billed.

    Hi Experts,
    For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
    My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
    Thanks in Advance,
    Abhinesh

    Hi Vivek,
    What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
    You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
    (Sorrowully I don't know which logical database would be good for you)
    BR
    Csaba

  • Diffrence in incomming order qty and billing qty in cube 0sd_c03 & 0sd_c01

    Dear All.
    i have uploaded 2 cubes 0SD_C01 & 0SD_C01 from our R/3 data, SAP recommed for 0SD_C03 for sales analysis and their best practice is also based on 0SD_C03  but it is very strange the values of both the cubes are not the same when i run the report but the values of 0SD_C01 is 100% same as R/3 values i.e. mcsi reports show the same incomming and billing qty as i can see in report for 0SD_C01 but strang to see in 0SD_C03 there is diffrence in these values.
    can any one explain why did this happen as SAP recommed to use lbwe data sources and their best practice also base on 0SD_C03 and the other one i.e. 0SD_C01 is based on old LIS structures.
    during exploration i come to know that in some material orders incomming and billing quantaties are same but diffrence in most of them.
    any help will be highly appreciated.
    thanks & best regards,
    Zeeshan

    Hi,
    There are somany Routines for Keyfigures in both Cubes, I hope you may using 0QUANT_B key figure for Qty, the reason is there may be some difernece in Routines in both cubes, so you need to check it tehn you check in teh reports, whether is there any restrictions, you need to iopen the each node and check i nthe both reports.
    I also faced teh same problem with MCSI and BW reports, MCSI, we can customizi it an dut is just InfoStructure and having routines internally. So you need to take one material, plant and date where the diffrenece is coming then track it.
    Check OSS NOTES:
    Note 166996 - BW InfoCube 0SD_C03: incorrect incoming order qty
    Note 1156259 - Update rules incorrect for InfoCube 0SD_C03
    Thanks
    Reddy
    Edited by: Surendra Reddy on Aug 10, 2009 7:19 AM

  • Sales Order Status with Billing Plan

    Dear SAP SD Gurus,
    I have an order with 2 billing plans and both of them have been invoiced.
    The status of my order still considered "being processed" eventhough both invoiced have been created and posted to FI.
    I'm using item category "TAO".
    Any clue will be greatly appreciated.
    Thanks,
    Soo

    Dear All,
    I have fixed the problem. The schedule line for TAO should be non-delivery relevant.
    I have changed to not-relevant for delivery and it is working now.
    Thanks a lot for all the clues.
    Regards,
    Soo

  • Restriction of sales order conversion to billing request for projects not r

    Dear all,
    We have SD integrated with Project systems. Each of the sales order is linked to the WBS element of the project which has to be billed. Sometimes a project which is not released is attached to the sales order and while billing it doesnu2019t get posted to accounts because that project/WBS element is not released. Is there a way to restrict conversion of sales order to billing request if the project is not released?
    Looking forward for help.
    Thanks and regards,
    Padmaja

    Define a new condition type and assign it to the pricining procedure
    In the requirement routine have a new routine and put a logic so that it compares the subtotal field A of nett price
    For e.g KOMP-NTPRC
    The condition type should apply when KOMP-NTPRC < =the draft amount
    You have to try this
    I havent done it practically
    Regards
    Raja

  • How to restrict Order Combination in Delivery

    Dear Gurus
    My client creates delivery in Collective Processing mode in batch run. But he does not want to create one  Delivery containing multiple Orders. It is possible by Order Combination Check in Customer master.
    I want to know if there is routine available in Copy control to control this.
    Regards,
    Neeraj Srivastava

    Hi,
    Yes, it is possible. Please deactivate that order comination in customer master as well as also maintain copy contol requirement VTLA there assign delviery split routine..
    Regards
    sankar

  • UK VAT - MWST Condition Rate in Sales Order different to Billing Document

    We are testing the UK VAT Rate Change.
    Condition MWST has a rate of 15% until today and 17.5% from tomorrow.
    When I create a sales order with a requested delivery date of tomorrow and a pricing date of today the MWST Condition is shown as 17.5% at both header and lin eitem.
    If I create a delivery, post goods issue and create a billing document today, the billing document correctly shows the MWST Condition rate as 15%%.
    But the Sales document still displays the MWST Condition rate as 17.5% .
    ?? How can I get the sales document to display the actual condition rate ??
    I cannot find a solution to this anywhere and would be grateful for any help.
    Regards,

    Hi Michael,
    If the pricing date for the Sales Order and the Billing Document are the same, the VAT should be also be the same.
    But the pricing date for both document does not always have to be the same.
    If the real goods issue date is different from the planned goods issue date and you use it as a reference for the pricing date, then both dates will be different & that's OK. The same would happen if a discount is changed after the Sales Order is introduced but before billing & a new price determination takes place during billing.
    IMHO the Billing Document is the critical document and needs to have the right VAT rate.
    The Sales Order should have the data calculated based on the best information available at creation time, but does not need to be corrected after Billing.
    Best Regards,
    Franck

  • Using bapi_po_create1 to create PO with return item - Order Combination

    Hello,
    There's a shipping tab that appears in a purchase return item, and in it there's a flag called Order Combination.
    Only i can't seem to find a way to change that flag using this BAPI, nor using bapi_po_change.
    Any ideas?
    Thank you in advance.
    Duarte

    Hi
    Its a setting that you maintain in the customer master reord that defaults it.
    So if you want this to be flagged for some vendors and for some no flag the you need to maintain accordingly in the Customer master data  - Sales are data  Shipping tab
    If you want it to be maintained through BAPI then populate the same in  POSHIPPINGEXP structure
    Thanks & Regards
    KK

  • In sales order item level billing tab

    in sales order item level billing tab you have nine fields for payment terms
    i want to know from where is the payment terms coming in the fields , i have checked that whatever payment term is there in SP/SH/PY they are not getting updated in the nine fields
    can anyone tell wat is the possible ways to fill these tabs

    Hi,
    Payment terms are coming from Customer Master on Sales order , I did checked by removing the payment terms from customer master and created the sales order were it has not defaulted.  Updated the Customer Master with Payment Terms and created the sales order now Payment terms got defaulted.
    Regards
    Raj

  • Order-related intercompany billing

    Hi
    I know that the standard system only generates an intercompany billing document for the cross-company code sales if a delivery is involved.
    The order-related intercompany billing and the cross company process for service items, leasing and maintenance items and third-party items is only possible with using the sap note 63459.
    I am using ideas ecc 6.0, where in the report required for creation of intercomapny billing ZZIVAUFT is already there. But here it asks for billing documnet & not the Purchase order or sales order.
    Has any body worked on this note. Can i get the deatils how to impliment this note.
    Thanking you
    Vinod

    Hi,
    buddy don't know abt ecc6 but it'll great if you tell me what all need to be done for order related inter comapny billing in 4.7 beacuse i think you know abt it.I gone through with that OSS notes 63459 but could'nt get through with it.Could you expalin.
    I hope will get a response from you.
    Regards,
    SATYA

  • Down Payment processing for Sales orders using Milestone Billing Plan

    Hi,
    The business scenario is as follows.
    The delivery for the sales orders are to be created only after the pre payment( a percentage of the total sales order value) is made by the customer.
    Hence the sales orders while creation are blocked for delivery creation using credit block by means of a userexit.
    The credit manager checks the blocked sales orders using VKM1 transaction and verify if there are any payments made by the customer to cover this pre payment to be made.
    If it is enough to cover then he releases the sales order manually for delivery creation.This is a complex process since there are too many sales orders and the payments made by the customer may not match the amount to be paid(it can be greater or lesser).The customer just pays a huge amount which is to be distributed among the sales orders for pre payments.
    Later, when the invoice is created, the customer account is cleared manually using F-32 transaction for the oldest open invoices.
    Here again there is a huge manual effort involved since he need to distribute the amount against the invoices using oldest open item principle.
    As a solution we are planning to implement "Down Payment processing for Sales orders using Milestone Billing Plan".
    Is this the right solution?
    Can you please give the steps in detail to implement this functionality for above scenario?
    We are using SAP 4.7 version without Project Systems.
    Thanks in advance.
    Regards,
    Ragesh

    Hi Ragesh
    Check the links where you will get the entire down-payment configuration
    [https://forums.sdn.sap.com/post!replydownpayments ]
    Regards
    Srinath

  • Make payment terms in sales order editable after billing

    Hi,
    i checked orders in two different systems. In one system payment term is editable even after completely billing the sales order. In other system the payment term field in sales order is grayed out after complete billing and it is not editable.
    Not sure what is the standard way. Is there any configuration / develpement throgh which we can control this?
    I want to make payment terms editable in SO even after completely billing the order.
    Any suggesion friends?
    Thanks,
    Tushar

    Hello Tushar,
    The fields:
       VBKD-INCO1 (Incoterm 1)
       VBKD-INCO2 (Incoterm 2)
       VBKD-ZTERM (Payment terms)
    remain open at header level even after the order has been billed.
    At the item level these fields are greyed out but at header level
    they remain open in the event that a user may want to add more items
    to the sales document.
    The possibilities where the payment term disabled for edit at header
    level could be done by modification/userexits, or screen definition.
    Could you please check if you are using exits in MV45AFZZ particularly USEREXIT_FIELD_MODIFICATION or screen variant ?
    Regards,
    Raghavendra YN

  • Create Return Order copy from Billing created from DBM Order Processing

    Hi SAP Gurus
    I have scenario where the user requested to create return order based on Billing created from DBM Order Processing.
    I know that, we can create return order from DBM. but the function copy based on order. the user is requested to do return
    by billing document ( function as SD )
    is this requirement can be done in SD VA01 where the user can copy the billing created from DBM and create return order using SD function

    Hi,
    in DBM you regulary have mulitiple invoices per order (due to split).
    You either can cancel an certain invoice and adapt the order or create a returns order based on an given order where you can select certain (e.g. invoiced) items.
    BR

  • Order Combination

    Hi All,
    Not able to combine  2 different  order  line items and create  single delivery. Same customer used in  both the sales orders.Order combination field flagged in  Customer master, sales order header level and item level. Config maintained  in copy controls from salesorder to delivery and below mentioned fields has same data in both the sales orders
      shipping point , ship to party, incoterms, sales organisation. Can  any one throw some light, on this , why  not  able to combine 2 different sales orders and generate single delivery? am i missing something
    Regards

    Run program ZLE_ANALYZE_DELIVERY_SPLIT in SA38 to analyze why the deliveries got splitted.
    If this program is not available, then the same can implemented using OSS Note 355404 - Why was there a delivery split during creation?
    Regards,

Maybe you are looking for