Order confermation

Hi,
I generate a report through Smartform everytime I confirm an order.
Now I d like to embed external files (pdf) to my original report (in these files I store important information about the items I m gonna send).
How can I do???
Mauro

There is a setting in Completion Confirmations , Where deviation from Planned Hours , Can be issued Warning Message but It will Not block entering of Actual Works more than Planned Work Hrs.
Check Spro - PMCS - Maint & Service Processing - Completion Confirmation - Define Control Parameter for Completion Confirmation , IN Check Tab , Make Work Dev Active , Enter Percentage 0% or 1% , save it
After when using iw41 , if u enter actual hrs more you will get warning.
Other thing tell me why do you need to Block Actual hrs entering if it is more than Planned Hrs in Order.
Where do this requirement exist , which industry ,
Regards,
Edited by: Srinivas Narayana Gowda on May 13, 2009 8:14 AM

Similar Messages

Purchase Order Confermation..

Dear All,
When I punch the sales order the Purchase order confirmation window Pop pop How this Window I disable.
Regards
Mangesh Pagdhare

Dear Mangesh Pagdhare,
You may uncheck purchase order under logistics tab to disable the link. Is that what you need?
Thanks,
Gordon

Downloading sales order to logical system

Hi all,
Can anyone tell me, when i create a sale order(VA01) how can i download it to the logical system & need to convert it into XML format as message.
Regards

Hi
My idea is to use the messages loaded in the order in according to its status.
U can see these messages by trx NACE (just as I said to you before).
These messages can create different objects like prints and idocs, but you can use it to create your file too.
So you want to create it as soon as the order is created, so I believe you need a message for Order Confermation.
Now this kind of message usually trigger the print but u can update the program (RVADOR01) in according to produce a file.
Max

"No parameters defined for plant and order type "

Hello Experts,
While doing Process order confermation geting error as "No parameters defined for plant and order type "
Pls guide me to resolve this issue...
Regards
Bhupen

Hi,
This error is due to the confirmation parameters not maintained with respect to the plant and order type you used in the process order.
Go to OPK4 transaction or in the path-Production Planning for Process Industries-Process Order-Operations-Confirmation-Define Confirmation Parameters.
Maintain with respect to plant and oreder type and again try to do teh confirmation.
Hope it helps
Thanks
Girish

How to pass message to standard message container

Dear All,
I am working on Exit for process order confermation while saving (CORK). In that i am using poviding Errorr message when raw material is not consum as per BOM. So while checking raw material consumed from RESB table in loop i want to add error message step by step in one message box and want to show all error message via standard message container or any other way by showing popub message box having 3 or 4 message at a time... Please help me out with this...
Thanks,
Ashish.

Hello Ashish
If you have interface IF_RECA_MESSAGE_LIST available on your system then I can highly recommend to use this one as message handler.
For a sample report have a look at:
[Message Handling - Finding the Needle in the Haystack|http://wiki.sdn.sap.com/wiki/display/profile/2007/07/09/MessageHandling-FindingtheNeedleintheHaystack]
Regards
Uwe

PRT- Maintenance Plan

Hi Experts,
Here is my Issue ,
We have Created Maintenance plan for PRT Equipment - for that Measuring point in counter over readg 500 pieces and Annual Estimate also 500 pieces .our Maintenance Package is every 200 cycle.BY confirming the production order exceeds the 200 pieces, the maintenance order also created by measuring document, in this juncture my doubt is , how to maintain the tool life and we wants the tool life is max of 500 pieces only , after exceeding the production order qty 500 pieces , the system will not allow to make production order confermation for that PRT Equipment, what is the settings for that,?
For Example a Planner m/c is Created by M- categary ( plant maintenance) , but the tool in which is used in planner m/c can be created P- categary ( PRT) . is it Right?
Tool -life only for 500 pieces , in that how to set for Mainetanacec package? instead of 200 pieces,can we assign 500 pieces?
ok If we set 500 in M.package , mainetance plan will be created and say tool is to be replaced, based on the plan we replace the tool and we instal new tool for the planner m/c. now can we create new PRT equipmnet- tool , for the planner m/c ? , For the new TOOL -PRT equipment , can we create new plan for that ? is it Right means what about old plan?
With Regards
SM.Charles Edwin

HI
sam,
As per ur requirment My understadnding is wirtten here-
1. First off, Creat all Tools as PRT Equipment... because in this way only u can generate maintenance plan for them and can perform maintenance.
2. For track of PRT Usage or Life u have to define a Measuring Point in PRT (Equipment). Whenever production order get confirm a measuring doucment will be posted...
in the Measuring point u can see last entered measurement reading that will reflect usage of PRT.
3. U have to assign a Maintenance Plan in PRT ( Equipment)
When PRT Usage exeeds certain level..(after confirmation of production order) Maintenace call object would be generated and subsequent maintenance can be carried out.
4. Besides all these we can not block usage of PRT in Production order.
5. PRT Must be assigned in Routing ..other wise it won;t work.
6. so prequesties for PRT Usage and Maintenance is
create Measuring point and a Performance Based Maintenance Plan. and assign it in PRT(Equipment).
7. in this case don't create PRT as a Material.
If Still in Doubt please ask.
Regards,
Amit kushwaha

User authorisation in tcode co15

Dear Sir,
For production order confermation we r using tcode- co15 but we want validation user can't t change there quantity if required only authoriesd person can change there quantity.
Is it possible can u please tell the procedure to solve this problem
Thnks in advance

Hi,
Option is to use transaction SHD0
The Purpose of transaction variants is to hide fields, menu functions, screens, to supply individual fields with default values or to change the ready for input status of one or more fields.
Using transaction variant, you can tailor screens to meet your required business process, and it can be used to accomplish security task, not directly supported by SAPu2019s security concepts.
A Transaction variant consist of a number of screen variants, customized to meet your requirements, Transaction variant only alters the layout of the screen. The Business processes delivered by SAP retain their integrity.
Ref Link
ttps://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation
for assigning to the users
ref Link
http://help.sap.com/saphelp_nw04s/helpdata/en/46/8ad21834a801dce10000000a1553f7/content.htm
regards
Venkat V

Confermation problem in production order

Dear All,
Good Morning
Kindly help out me from below mentioned difficulty
We have wastage norms of 3% and over delievery norms =3%
it means i can issue a 3% more material but during confirmation it give message of overdelievery not permitted?
So for a time being we can increase overdelievery % to 3.1%
Hope for quick response.

Dear All
This error comes during confirmation of first operation in Production Order and not while doing GR and GI .
I can't set overdelievery to unlimited in material master 'Work scheduling as it allow the user to book any qty in production order . We want to restrict them to 3% and same is set in in material master 'Work scheduling overdelievery =3% .
In SPRO'confirmation setting we have following setting
a) Operation sequence   Operation sequence is not check
b) Underdelivery        Underdelivery tolerance is not
c)   Overdelivery         Overdelivery tolerance is not c
d) QM results rec.      Message if no inspection results
Kindly help us
Regards

The pre-order of BO3

i have pre-orderd BO3 and sony have send me a confermation masseg ok but weher is the BETA CODE and wehen they are gonna send me ?
P.S : i have pre order it yasterday
بالعربي انا امس شريت بلاك اوبس ٣ طلب مسبق لكن ارسلولي سوني بس رساله التاكيد حق الطلب وين كود البيتا ومتى يرسلوه لي ؟

Someone has already answered this here:http://community.eu.playstation.com/...Black-ops-3-beta-code

Production order problem

dear guru,
i have problem in production order.i hve quantity in production order but when i conferm it with t code co11n the quantity does not show there
Pls tell me any solotun for it.
Edited by: Isabelle Britten on Jun 10, 2008 3:01 PM

Hi Singh,
In OPK4
In the last tab(operation Indv.entry)
Under quantities
tick the first & last
You will get it
Even in CO11n you press actual data you will get
Rgds,
SVP

Order status concern?

I ordered my 3GS on June 10 and got my confermation email the next day. One thing i noticed is the pricing on the email...
"IPHONE 3G S BLACK 16GB-USA MB715LL/A $0.00 1 $0.00
Ships: Delivers by June 19th
Subtotal $0.00
Sales Tax $16.42
*Total Price $16.42*"
total price $16.42? Now it withdrew out of my account at the correct price but the email doesnt show it? another thing, when i check my order status through the apple website, it shows no orders? When i click the order # through my confermation email it shows the details of the order? is this something i should take up with apple, is anyone else getting this? thanks for the help!

i called Apple this morning. the rep told me not to worry about the order pricing. they didnt have an answer on why it happened but told me that my iPhone 3GS shipped this morning, a couple mins later i got my shipment email. sent me a copy of their invoice with the correct price. no worries now.

Open Sales Orders Backlog Report

Hi All: I have been asked to create Backlog reports for Open Sales Orders and the revenue amounts for the next 15days, one month, 2 months, 3 months 6 months etc etc. Does anyone know of a standard report that covers that and the business content and cues that go with it?
Thanks in advance
Bobby

I haven't seen any standard content for it, with my client, we actually developed the open order report from Item extractor and status extractor. And compare the created on date to the system data to see how long it has been opened for and put it in different buckets.
Hopes that help.
thanks.
Wond.

Open sale order aging report

Need a report on open order aging. The open order means not delivered or partially delivered. Further with days range since its open or not fully delievered i.e. > 15 days or 15-30 days and so on.
The standard transactions Va05 and VL10c can provide the list but dont provide any aging info.
Kindly help in this.
thanks
anu

Dear Anu
1. First in VA05 you can use Variants and get the report as desired by you,create one variant and use Filter along with greater then, less then (all are in selection option icon)
This way you can create three variants.
But limitation is dates has to be manually changed in variants each time.
2. Try this Tcodes
S_ALR_87014387 Display Document Flow
S_ALR_87014392 Display Document Flow
This reports will give you document flow run report with ticking checkbox for sales order,delivery and goods isse then after getting the list expand all (Shift+F12)
you will get the quantities for sales order, and what is delivered and what is issued.
3. As such if you want exactly the report you can take help of ABAP to create the ALV
4. Report or create Queries in SQVI , or else create MCSI report
Regards
Jitesh

Necessary Fields For Creation of Service PO of Order Type Relaese Order.

Dear Guru,
I have encountered an issue which i am trying to resolve...
My this requirment will seem little okward the way i am asking but i have no way...
The issue is I have to create a Service PO of Order type Release order (RO) using BAPI Function Module .BAPI_PO_CREATE1.
The service PO should be of multiple Item and services for particular line item should be multiple.
When I am creating this using ME21 or ME21N i am facing no issue.
But when i am using BAPI Function Module .BAPI_PO_CREATE1
i am getting following errors ;; The error which i am getting as below
T ID                   NUM MESSAGE
E BAPI                001 No instance of object type PurchaseOrder has been created. External reference:
E MEPO              000 Purchase order still contains faulty items
E SE                   029 Please maintain services or limits
E SE                   140 Service HIRING OF LCD: please specify unit of measure
But I am failing to findout in which field services or limits and unit of measurement have to maintain.
What are the necessary fields have to pass in Bapi import parameter and the table i am unable to findout.
Please show some way how to resolve this or give me some guideline to resolve this
Dear Moderator request your kind intervane to move this qurry into correct forum if i have asked this in wrong forum
Thanks and regards
saifur rahaman

Hi Saifur
Can you please elaborate how did you resolve the issue we are also facing same problem when we are trying to create the PO for service items through SRM it is throwing same error while creating the PO in SAP.
Email Id : [email protected]
Thank you in advance!!
Regards
Deepika

How to restrict manual changing of free goods in sales order

Hi ,
Goodmorning ,
We have some requirement : In sales order free goods quantity determination by system should not be allowed to change manually , where can we do this ?
Looking for your inputs
Thanks and regards
Venkat

As per SAP Standard, when the main Item quantity is changed, the Free Goods are redetermined. In this case any manual changes to Free Goods Quantities are lost.
But your requirement is for restricting the Chages of the Quantity of Free Goods Correct?
I believe there is no SAP standard solution for this. You will have to apply a User Exit, which will check the Item category of each LIne item & if it is free goods (TANN) then changes are not permitted.
Hope this helps.
Thanks,
Jignesh Mehta

Order confermation

Similar Messages

Maybe you are looking for