Order forecast Monitor screen will it pick base UOM or any other unit of measure?

Hi All,
In OFM screen showing only qty against key figures but UOM not showing.
I would like to know in OFM screen whether always qty will show in base UOM or any other unit of measure?
please can you suggest on this.
Regards

Venkat,
SNC supports multiple UOM (Base UOM and Document UOM) only for the below Screens:
● Detail screen for purchase orders
● Detail screen for replenishment orders
● Detail screen for invoices
● Detail screen for advanced shipping notifications (ASNs)
● Query To Be Confirmed for the purchase order worklist
Ref :
http://help.sap.com/saphelp_snc700_ehp02/helpdata/en/46/9c3cff7ded371ae10000000a11466f/content.htm?frameset=/en/46/827d1…
So, OFM screen data will always be in Base UOM only.
Regards,
Bharath

Similar Messages

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

Is the contract-free iphone6 lock to the T-Mobile sim card or will i be able to use any other carrier sim card in iphone6?

Is the contract-free iphone6 lock to the T-Mobile sim card or will i be able to use any other carrier sim card in the phone?

The phone is NOT locked.

Will find my phone work on any other phone such as sprint

Will findmy phone work on any other phone such as sprint

OK, well, I do understand the accuracy issue. My problem is that I can't get it to show as a device to find. I've tried all sorts of things including deleting and re enabling my Mobile Me account and then thought maybe it just didn't work on the wi-fi model. Since you say it does, I'm stumped as to why I can't get it to show up.
I've spent so much time trying to get it recognized that I was almost hoping you'd tell me it wouldn't work with wi-fi only so I could let it go. Now I have to get back at it to "solve" the mystery at least.
Thanks.........

My screen will not work at all. Any advice?

My touch screen as completely quit working.

See Here...
iOS: Not responding or does not turn on
TROUBLESHOOTING iiPod Touch Hardware
http://support.apple.com/kb/TS2771

Mail not responding. App is open but will not quit or respond in any other way.

My Mail app is not responding. The Dock shows that Mail is open, but I cannot get the screen to pull up, quit or otherwise respond. I tried to restart, but Mail stops that from happening.

From the menu bar, select
 ▹ Force Quit...
then select the frozen application from the list and press return.

HT1212 screen frozen cannot enter password , is their any other way of being able to open phone , so i can take all numbers of phone

screen frozen cannot enter password,is their a way of recovering, numbers

Try resetting your phone:
Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.

IBank error will not allow me to perform any other functions.

I am receiving an error in iBank that says, "The document could not be saved. amount is required value" and has an OK button to click on. Nothing happens when I click on it. I cannot close iBank, cannot shut down, turn off. Everything is disabled. When I try to shut down, it tells me iBank has disabled shutdown and to close iBank. But, I can't! Any ideas?

4gs wrote:
I am able to right click on iBank icon, there is no Force Quit-only Quit. When I select Quit, it gives me the same message that iBank has disabled shutdown. I am unable to click on Apple. When I try to click on it or anything on any of the toolbars, it just flashes for a fraction of a second. I am unable to select any of the options because they are gone.
Option-Command-Esc (hold for three seconds)
If that doesn't work press the power button on your Mac and hold until shutdown.

HT1923 Will I lose my playlists (or any other settings) by unistalling?

I want to revert back to iTunes ver 10.7 and was provided instructions for un-install and re-install but it wasn't clear if I would retain my settings, more importantly my playlists. Thanks!
http://support.apple.com/kb/HT1923

No, it won't affect your data.

HT201406 I have tried everything but my screen is still unresponsive have you got any other ideas ???

Ihave tried everything with my ipod and it is still unresponsive if anyone has any ideas comment on this message thanks

If a restore to factory settings in iTunes does not resolve the issue, it's more than likely hardware related, meaning you'll need to have the iPod serviced or replaced either by Apple or a third party service.
I would schedule an appointment at your local Apple Store/Genius Bar to have them take a look.
B-rock

No alternative unit of measure specified, during creation of sales order

Dear Experts,
when user is creating sales order, User is getting the error message no. MM108 "No alternative unit of measure specified" for particular material.
we have checked the alternative unit of measure it is already maintiained in the material master.
we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
can you provide the exact reason and solution to over come this please .
Thanks in advance.
Regards,
Suresh Veerepalli

Dear Experts,
The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text
1     L     l     <=>     1     L     l
1.121     KG     kg     <=>     1.000     L     l
1     PCE     Piece     <=>     1     L     l
1     BDL     Bundle     <=>     12     L     l
1     PAL     Pallet     <=>     720     L     l
Error is gettting when creation of Sales Order ,Order is standard order.
When we double click on error message the following details are shown.
1.No alternative unit of measure specified
message no:MM108
2.Diagnosis:
   This alternative unit of measure is missing.
3.System response :
   The system cannot carry out conversion
4.Prodedure:
This is due to Program error that should not occur.
Please provide the exact solution on this issuse.
Thanks

How can i find the base UOM?

Hi ,
I have created an rfc function module in our BW system. I have to call this RFC from SAP R/3 . To call this RFC I have to pass MATERIAL NUMBER , Quantity Required and UOM. Every thing is working good.
As per the Spec , "if UOM is not there on requested call , Assume base UOM"
I Didnt understand this point .How can find the base UOM of the quantity required?
Could you please give me the idea?
Thanks,
Suresh

Hi ,
Thanks for your responce.
Do you mean: When I call the RFC function module , if i wont give any UOM,
It will take the base UOM automatically or i should include any logic to pass the base uom.
Please clarify this.
Thanks.
Suresh.

HELP Make Settings for Units of Measurement for Monitoring of Consumption

Hello All:
I just cant' define an unit of measure to stablish consumption calculation. I know how to make all the other settings, but I just can't stablish the unit of measure to use in there.
Could please somebody gime this explanation ? Step by step ?
I've read that are preconfigured units of measure for examplo MPG miles per gallon US but I will use Kilometers per litre.
I want to know how to create this unit
how to link it with an existing SI group
So I can use it in the step Make Settings for Units of Measurement for Monitoring of Consumption
thanks in advance
Luis Henrique

Dear Luis,
Please use CUNI t code for creating unit of measurement. Please follow any exist Unit of measurement and replicate the same. This is a configuration so will have transport requirement
Regards
Gajesh

I am stumped I do not understand why my roommates macbook pro when duel screened will display perfectly on my monitor while mine refuses to, but mine will display perfectly when using another monitor that is not mine. Please help me out.

One day when using my duel display the second monitor decided it wouldn't display at full resolution in the middle of doing something i was confused. I use a mini display to hdmi then hdmi to the second monitor. I thought maybe the converter or cable died. I bought another another mini display to hdmi and tried another hdmi cord and the same issue. My roommate has macbook pro as well so i decided to see if it was the monitor, when i pluged the mini display converter into his and used the external monitor it displayed perfectly not below resolution. Doing this I knew it was not the monitor or the mini display to hdmi or the hdmi cable. I took it into the genuis bar assuming now that it was my grapics card or logic board. When the genuis went to duel screen it on a cinema display it displayed perfectly. So went home tried to duel screen it again and still not displaying at full resolution. That is where I am stuck, in summary:
My screen used to display perfect resolution on a second monitor and suddenly did not.
Tested two mini display to hdmi and hdmi cords both were fine.
Tested to see if monitor was issue but displayed perfectly when i used roommates laptop.
Went to genius bar and displayed perfectly on second monitor so it can display perfect resolution on apples monitors but will not do so anymore on my monitor, even though roommates macbook pro will display perfect resolution on my monitor.
I am beyond confused.

Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.

Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order. Can you pl. tell me how to configure this scenario.
Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

Hi,
Automatic Batch Determination for production order components is possible by configuration.
You can also refer below discussions to map your scenario.
Batch determination in production order | SCN
Automatic Batch Determination in Production order
Regards,
Naresh

Order forecast Monitor screen will it pick base UOM or any other unit of measure?

Similar Messages

Maybe you are looking for