Order - line item deletions

We are using standard SAP extractors and we have a major problem with Sales Orders. When line items are being deleted, the extractors are not sending this info to BW and our backlog is showing a different picture compared to the source system. Please help.

We use extract structures:
MC11VA0HDR
MC11VA0ITM
MC11VA0KON
MC11VA0SCL
MC11VA0STH
MC11VA0STI
MC11V_0ITM
MC11V_0SCL
MC11V_0SSL
data sources:
2lis_11_vahdr
2lis_11_vaitm
2lis_11_VAKON
2lis_11_VASCL
2lis_11_VASTH
2lis_11_VASTI
2lis_11_V_ITM
2lis_11_V_SCL
2lis_11_V_SSL

Similar Messages

Sales order line item delete error for MTO sales order

Dear Experts
iam facing below error for MTO sales order line item deletion
"For reasons of cost management, item 000040 cannot
be deleted"
Please help
Regards,
KEdar

It looks you try to delete the sales order line item and you get this error message.
Try to put reason for rejection for the line item and save the order. This is equal to deleting the line item.
You can also refer the OSS note 14097 - Order item cannot be deleted/overwritten for further information.
Regards,

Purchase order line item delete / undelete

Dear Experts,
I have one scenario please check system not allow to me to reset Mark of Deletion in P O line item for below purpose i do one below scenario.
1. Material without any valuation category
Material : XYZ-0001
Plant : 1000
Purchase order no. 4310034899 ,
Make GRN & VIV
2: After Valuation category changed in material master u2026.(Material XYZ-0001)
If I Try to Undelete line item from purchase order after val cat. Change u2026 system appear error message Deletion indicator cannot be unset
Please if any idea so share with me.
Regards
Aamir

Aamir,
When the PO Item was created say for example Material had Valuation category "Y" and latter you wanted to change the category to "Y". Now system would have check for all open PO's etc...based on this you must have set Deletion Indicator to this Line Item to allow valuation category change in material master. Now when this Item got created in the table level (EKPO), system updates the valuation category "Y". Currently this valuation category is not active so it would not allow you to perform removal of deletion indicator as program cannot automatically nor you have an option to manually update the valuation category to this Item.
Regards,
Prasobh

Purchase Order line items deleted after coying from PO in GRPO

Hi All,
Does anyone here experienced this problem? The user reported that after adding the GRPO that generated by copying from PO, they found out that the line items in PO has been deleted? We're trying to reproduce this problem but we're unable to reproduce it.
Thanks and Regards,
Vin

Hi Melvin,
Which version of SAP B1 you are working on ?
So if your PO item lines are deleted when copying to GRPO are you able to track the Base document from the GRPO. having the particular GRPO opened enable the form settingsa and make visble the Basetype and the other fields and check if the PO No. is available.
If this is a one of issue or you experience the same then thsi issue can be reported. If you have a back up of the DB before this transaction of PO copied into PO, restore the backup and check if the same applies.
Regards,
Rakesh N

Deleting Sales order line item

Hi,
The sales order line item deletion should not be allowed after accouting of the advance payment is happened.
How to achieve this.

Hi Seema
As far as I could guess you need to grey out VBAP-ABGRU field once you have posted payment for the sales order line item. Since this is a SD related process no validation or substitution would work in this. In this case when posting the incoming down payment through F-29 internally you need to call the user exit in the sales document to update the status of VBAP-ABGRU.
Thanks
Indranil

Restrict deletion of sales order line items

Hi,
I need to restrict deleting of sales order line item, I think we can use the user exit, MV45AFZB, USEREXIT_CHECK_XVBAP_FOR_DELE.
But when i set the flag to 'X', even though it does not delete at tht instance when the sales order save is clicked again the line item gets deleted.
ANy idea , to prevent that?
Thanks
Keshi

Hi Keshi,
That is the correct exit, we are using the same without any problem. Just set US_EXIT = CHARX.
Regards,
John.

Cannot reject/delete sales order line item due to del.date in 2210

Hi all,
not sure if anyone else had this issue already....
Situation :
Sales order line item entered with delivery date in 2210. We would like to correct this order but can't....
every time SAP issues error :
Error determining posting period (info
S008, variant GL, RC 3)
I believe this is because we haven't maintained our calendars yet for 2210 :-D
Question : without us having to load/define the calendar...is there a utility/oss program which we can use to delete the line item, or reject it...or even update the delivery date?
Thanks for your help!

If the system pop ups the error message M2012, then please refer note 10891 or 37532. If the error message number is different, please update the forum.
thanks
G. Lakshmipathi

Deleting Purchase Order Line items

Is it possible when you delete a purchase order line item using ME22n to have the corresponding purchase requisition line item marked as closed or deleted?
Currently when we delete the PO line item we get the message that the "Requisition quantity XXXX open again" . We have purchase requisitions converting to purchase orders via ME59N on a schedule batch job, so the req gets converted to a PO again if it is not deleted quick enough.

Hi Gary,
In MRP related PR to PO or without MRP also, whenever you convert a PR to PO and then delete an item from PO, the corresponding PR gets opened automatically - and its standard. This is logical also, because sometimes the person creating PR is different from the person creating PO. And If a PO item has been created synchronous to PR item, then its deletion must also be sysnchronous.
I hope this answers your querry.
Regards,
HKV...

Information about the deleted sales order line item in idoc.

Hi Experts,
I am new to IDOC.We have the following idoc requirement,
When a line item is deleted from the sales order(VA02) ,
the outbound idoc getting triggered for the sales order has the information about the rest all line items other than the deleted line item.We now want the information about the deleted line item in the Idoc .
Please help me in proceeding further.

Hi,
I am facing the same scenario of capturing the deleted sales order line item in idoc.
I am using ORDRSP message type , where in E1EDP01- ACTION contains value "000" .
And the Deletion line item is not been captured, is there any configuration setting required to
capture the deleted line item in Idoc.
Based on the posting in this thread i understand that there is an indicator which has to be set .
Please let me know what is that indicator and how to set it?
Thanks
Sathish

Mass Deletion of Sales order line items

Dear Gurus..
There is a transaction VA02 for change and deletion of sales order line items. it takes time to delete line item of sales order one by one.. is there any abap program to do this process..
if so please let me know
regards
Saad Nisar

Hi,
You can use trx MASS with object type BUS2032 to change sales order items. Please check this link:
Re: Mass deletion of sales orders
Or try LSMW.
Regards,
Csaba
Edited by: Csaba Szommer on Apr 10, 2009 8:18 AM
Edited by: Csaba Szommer on Apr 10, 2009 8:21 AM

FM/Transaction/BAPI to delete sales order line item in APO

Hi,
Could you please share the details of FM / Transaction / BAPI to delete sales order line item in APO?
Tcode - SDORDER_DEL / FM - BAPI_SLSRVAPS_SAVEMULTI2 delete the complete order with all its order items.
Even the OM function modulesdelete the complete order. We could not locate a BAPI/FM for deleting only specific line items of a Sales order...
Thanks,
Arvind.S

Hi Arvind,
Can you try the below:-
Function module : BAPI_SLSRVAPS_REMOVEITEMS
Bapi object type: BUS10501
Using this, one can delete One or More Sales Order Items / Schedule Lines.
Please confirm
Regards
R. Senthil Mareeswaran.

Access control on Sales Orders - Line items

Is it possible to control access to users from deleting line items in sales orders?
(since Julius would reply saying a "YES" or a "NO" , i will complete my question )
If it is feasible to control, could some one make a suggestion on how to do this and help me, please?

Hi Manjula,
Thanks for trying to help and for sending the link, but unfortunately, the link doesnt help me for my question.
the discussion in the link you sent is more on the stock situations that is a mis-match in MD04, when a order line item is rejected then the stock of the line item should be refelcted in MD04 and since this doesnt happen the program was supposed to be eecuted for consistency ==> this was the issue in the link
Now, coming to the problem on hand: If i create a sales order with 25 line items and make a delivery of 22 line items , do a PGI for the 22 and then , i check for the other 3 line items in the Order, realize that the schedule lines in the order are for a date that doesnt meet the date of goods issue of the other 22 items - i delete the 3 line items in the order <== this is what i want to restrict, users shouldnt be able to delete line items of a order that has a subsequent document.
I know i can manage doing this via ABAP based on a few validations on the document flow, but i wanted to know if there is an alternate method of achieving this.
I vaguely remember a situation where i had a user who couldnt enter line items in Purchase orders although he had all required transactions, org,values.......after much research and quite a few trial and error methods i got to a solution by adding/deleting (i dont remember corretly) a parameter value to the user and he could add line items. The curiosity i have is in knowing if there is some parameter value or an other Authorization object, that could help me achieve my objective
Although it could be efficient, ABAP would be my last option
Do keep posting, any help is good help

In Purchase Order Line item Maintaining Serial Numbers for Material Codes

Dear Gurus,
We have a business process in legacy system for Purchase Order like in PO line item, Material code with description, Quantity, unit of Measurement, Serial Number Start and Serial Number End is maintained, for example for Material code when we enter the data AXMLN00001 in Serial Number Start column, if the Qty 500 is maintained, by default system will calculate AXMLN00500 in Serial Number End column.
We understand that in standard SAP we donu2019t have this option of maintaining Serial Number Start and End in Purchase order Line item. Please let us know how this can be mapped and is it advisable to create two Z fields in EKPO table or else can we make any development.
Suppose if this is not possible in SAP for PO then in Banks if we want to place a order for Cheque books how we can maintain Start and End Serial Numbers to print in cheque books.
Also client is not agreeing to maintain manually Serial numbers in item text.
regards,
Dhanu

Aamir,
When the PO Item was created say for example Material had Valuation category "Y" and latter you wanted to change the category to "Y". Now system would have check for all open PO's etc...based on this you must have set Deletion Indicator to this Line Item to allow valuation category change in material master. Now when this Item got created in the table level (EKPO), system updates the valuation category "Y". Currently this valuation category is not active so it would not allow you to perform removal of deletion indicator as program cannot automatically nor you have an option to manually update the valuation category to this Item.
Regards,
Prasobh

Re-Cost (CK55) Marked Sales Order Line Items

My current client resets standards each quarter. They have requested to re-cost open CTO Sales Order line items and update the valuated sales order cost (EK01). I have reviewed the options available in CK55 - Mass Costing and find the processing log retrurns the following message:
   Cost estimate with status VO exists. See long text
   Message no. CK_MCSO014
   Diagnosis
   A cost estimate with the status VO already exists. This cost estimate will not be overwritten.
   System Response
   Processing continues with the next item.
   Note
   You can remove this message from the log with the customizing transaction User-Defined Error Management for Mass Costing of
   Sales Documents. The item will still not be costed, however.
Short of manually re-costing each open sales order line item. Is there a way to re-cost open CTO Sales Order Line items?
Regards,
Dewayne Wesley

I didn't realize there was a MASS Cost transaction.
Is there a MASS delete Sales order Cost estimat transaction? That would help.

Undelete Purchase order line item

Good day,
Is it possible to undelete a deleted purchase order line item? If yes, how can I establish this?
Thanks & regards,
Christel Smolders

hi
u will see block / unblock symbol also dust bin symbol in Po line. U can delete line item here and when u want to undelete by pressing unblock u can achive same
select the line item and then press unblock / undelete symbol ( Open lock symbol) line item will undelete
Vishal...

Order - line item deletions

Similar Messages

Maybe you are looking for