Order - Line item doesnot exit

Hi Friends.
Whener i opened order in va02. I have been geeting popup error information massage " Item 00010 does not exit " why ?????
I checked TC = VOV8, Numbersystem - Item number increment = 5 is there.
Kindly suggest ,immediatly.
Regards
siva

It should be 10
I mean the increment in VOV8
Hope it helps
Reward if it helps
Cheers & Rgds
Sudeep

Similar Messages

Sales order line item user exit?

Hi Folks,
Can any one of you suggest me an user exit in sales order line item level?
I want something which stops before/ or just after entering the quantity in the item level.
We wanted to set up a issue which deals with rounding profile comming from CMIR record to take from Ship-to rather than standard Sold-to party functionality.
Thanks a TON in advance.
Praveen.

Praveen,
Check this post
https://forums.sdn.sap.com/click.jspa?searchID=7098802&messageID=1674246
Regards,
Satish

Sales Order Line Items User Exit - Credit Management/ Exposure Calculation

Hello Folks
I am looking for a solution to a peculiar problem we have in credit management.
In case of Drop Ship sales order life cycle, the system automatically creates two line items per sales order - one each for Freight and Handling Fees. these are NOT relevant to schedule line delivery, nor are they billed to the customer along with the material billing. The default update rule for credit control area concerned is 12. The system, on finding line items not relevant to schedule line delivery automatically switches from rule 12 to 18. This leads to Open Deliveries field (S067-OLIWW) being updated instead of Open Orders (S066-OEIKW) on saving the sales order.
Once the sales order is billed for the material, the system should logically display net value as zero for the open order (as the 2 lines of fees and freight are not yet billed, the order is still open). But the system considers this figure at SALES DOCUMENT HEADER level and considers the net value as the total value of the sales document (including the material that is already billed).
What I am looking for is if there is an exit available whereby the system considers only those line items whose billing status indicator is "not complete". As such, the net value should be updated to the S067-OLIKW field net of the billed items.
Please advise if there is any such user exit available. Also, is there a way to customize this? We are exploring this at our end, but would appreciate an expert advise. Right advise will be awarded with brownie points
Regards
Mandar Barve

VKM1 uses FM SD_ORDER_CREDIT_RELEASE to release orders on credit.

User Exit for Purchase Order Line Items.

I have been trying to search for a User Exit for Purchase Order Line Items and have been unable to do find anything. I need to overwrite the Net Price and Pricing Condition on a certain type of material based upon the Pricing Condition for that Line Item which is on the Sales Document. Any direction you can point me into would be greatly appreciated. Thanks.

Thanks for pointing me in the right direction. I was able to create my first BADI using the PROCESS_ITEM method. The following link was also very helpful: Re: BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM

User Exit to make changes in sales order line item data.

Hi All,
I need to know about user exit by whcih I can make changes in sales order line item details --> Account assignment tab --> Sales order no and line item no.
I want to make changes so as to bring the active maintenance contract no and line item no here instead of sales order no and line item no. So whenever ( Va02 or Va03) we go to sales order line item and se the account assignment tab I should see the contract no there.
Just let me know the USER EXIT to do the above changes.
Points will be awarded.
Regards,
Satish.

Hi,
Please have a look at the following user exits...
1. user exit_ save_document
2. user exit_save_document_prepare
Regards
sankar

Need to Split Sales Order Line Item in VA01

Hi,
I have a requirement in which i have to split an order line item for KMAT materail number. system popup configurable screen, here all the required characteristic values have to be selected as per the customer requirement.
After entering all the required customer specific characteristic values, system determines batch automatically. If characteristic values of the Batch matches with the characteristic values of configurable screen selected in the sales order
Here also we have to check the sales Order Quantity (VBAP u2013 KWMENG) and order Confirmed quantity (VBEP u2013 BMENG), if the both the quantities are not same, consider order has partially confirmed.
If Order quantity is partially confirmed, check for the batches with the same characteristic values of the quotation configurable screen and if batch found, system has to create a one more line item and new batch has to be assigned to create line item.
Reduce the order quantity equal to the confirmation quantity in the first line item.
Create a new line item in the quotation, copy all the remaining unconfirmed quantity from the first line item and also copy all the characteristics and properties (item category, schedule line category, business data, item data, and requirement type) and assign the batch to the new line item. System does the availability check automatically and confirms.
In another scenario system doesnu2019t find batch, in this case capable to promise has to trigger directly.
Here we have to check the Order confirmed quantity, if confirmed quantity is equal to zero.
Change the item category of the line item, due to which system determines different Requirement type and schedule line category.
Based on the Requirement type system triggers the capable to promise.
I would lke to know which is the suitable user eixt or BADI to split the line items and what all the tables or structures i need to populate in order to create a new line item successfully.
I have seen many post in sdn but no body gives the right user exit name where i can add new line item.
Regards,

Hi Amit,
Thanks for your reply. In this scenario configurable material is involved. And first Make to Stock scenario is executed to check any material with customer entered characteristics are avialable. If its so it will determine its batch and assigned the quantity.
If zero quantity is assigned or no quantity is assigned then I have to trigger the Make to Order scenario for rest of unconfirmed quantities in order.
I have check it in USEREXIT_MOVE_FIELD_TO_VBAP but it was of no use. I even tried in USEREXIT_CHECK_VBAP but still no result. I am not sure what all the tables and structures i need to populate there.
Regards,

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

Restrict deletion of sales order line items

Hi,
I need to restrict deleting of sales order line item, I think we can use the user exit, MV45AFZB, USEREXIT_CHECK_XVBAP_FOR_DELE.
But when i set the flag to 'X', even though it does not delete at tht instance when the sales order save is clicked again the line item gets deleted.
ANy idea , to prevent that?
Thanks
Keshi

Hi Keshi,
That is the correct exit, we are using the same without any problem. Just set US_EXIT = CHARX.
Regards,
John.

Revenue Recognition based on User Status of assigned Sales Order line item

Dear Community members,
We have requirement to recognize / de-recognize revenue posted to WBS for calculation of RA, based on the 'User status' of the assigned Sales Order line item.
To elaborate requirement further -
1) WBS Element - XXX - 10 ( with operative indicator - Plan/Bill/Account Assign)
2) Sales Order(SO) Line Items assigned to the above WBS -
- SO No - 123 Line Item 10 - Actual Rev - $ 300 - User Status - EXE (Meaning this work is in progress , partial payment received thus actual revenue for RA at WBS is 'Zero'
- SO No - 124 Line Item 20 - Actual Rev - $ 400 - User Status - COMPL(Meaning this work is Complete , all payment received thus actual revenue for RA at WBS is $400
- SO No - 125 Line Item 10 - Actual Rev - $ 800 - User Status - EXE (Meaning this work is in progress , partial payment received thus actual revenue for RA at WBS is 'Zero'
As per WBS reports Actual Revenue posted to WBS XXX-10 is $ 1500 ( $300$400$800) , however since two SO line items ( SO 123 /line item 10 and SO 125 / line Item 10 ) are NOT having User status 'COMPLETE', the actual revenue posted by those line items $ 1100/- ($300 + 800) should not be included as Actual Revenue for RA at WBS level.
Thus Actual Revenue for RA at WBS XXX-10 should be $ 400 /- ( the revenue posted by SO 124/line item 20 which has user status as 'COMPLETE')
How do above can be achieved?? Is there any standard solution for this?? Is any SAP Note available for this (I too am looking for one but not found any ) ?? do we need any enhancement , Customer exit etc
Thanks in advance
with regards

Hi,
Thanks. You are right that the 'Completed Contract Method' would defer revenue recognition. However, the status checked would be of the RA object (WBS Element in this case, as RA key is on WBS and RA is being calculated on the WBS).
However, our requirement is to check the user status of the Sales Order Line items assigned to the WBS element and filter the revenues posted based on the active user status of individual Sales Order Line item.
Please give you inputs.
Thanks in advance
With regards

Copying text from CMIR (KNMT) to the Sales Order Line Item

We need to copy text from the CMIR (KNMT) to the Sales Order Line Item with two steps in the access sequence. First to look up by the Ship to Partner Function. If doesn't exist, then look up by Sold to Partner Function. Have setup a new text id (ZPRN), a new access seq (9011). The access seq has one seq =5 for KNMT, ZPRN, all languages and that saves fine. When I set the Partner Function to be SH. I get the following error msg:
"The Language does not come from the partner function AG for MVKE".
Any ideas? This access seq does not reference MVKE. It only references KNMT.
Thanks!

Hi Lisa,
Just stumbled on this post, as I am searching for something similar.
What you are attempting to do isn't possible in config.
This is because as standard Customer Material Info Records are not even considered for ship-to party in the sales order.
They work for sold-to only.
Therefore, this funny error message is SAP's way of saying, "Why are you trying to enter a partner here, because the data is determined for sold to only?"
You can change this with development for other fields (ie, to determine delivery plant, tolerances etc at ship-to) by using
the exit MV45AFZB with the USEREXIT_CUST_MATERIAL_READ form.
However, even if you do this, Text Determination is still sold-to only and still doesn't behave.
I am currently looking myself for a solution for this problem and I will let you know what I find.
Cheers
Chris

How to set Confrimed quantity as 0 in the sales order line item

hi all
i have a requirement that my user dont want to see confirmed quantity in the sales order line item.
scenario is make to order.
i have set strategy group is 20 -make to order
MRP Type is PD
Lot size -
EX , still its showing confirmed quantity.
could pls any one tell me how to set 0 quantity in the sales order line item
thnx

Dear Sateesh,
If the availability check is carried out and stock is not there in our plant, then it will show the confirmed quantity as Zero.
If you don't want to carry out the availability check,
To achieve this,
1. Remove the availability check in the transaction OVZG against your requirement class.
You can find the requirement type assigned to the sale order in the procurement tab.
In OVZH transaction, you can find the requirement class assigned to your requirement type.
2. Remove the availability check for your schedule line category in VOV6.
In the material master MRP3 view, you ll be having Availability check, there you need to specify the availability check..
If you specify it as KP(No check), then it will confirm the qty, though the stock is not there in our plant..
To meet your requirement, you have to prefer user exit.(Correct me if I am wrong)
Thanks,
Venkatesh.S.P

Capture START and END installation date on order line item

Requirement: capture both start and finish dates for an installation program. Will likely require 2 new fields at order line item level.
USEREXIT_MOVE_FIELD_TO_VBAP???
Any suggestion for this enhancement???

Hi
U need to enhance the VBAP table by APPEND structure in order to add new fields you need.
So in that exit you can fill your new fields:
MOVE <......> TO VBAP-Z<......>.
Max

SD Order line item

We have a requirement wherein we want to copy Order line items from VA01 or VA02. The first approach we thought about was to have a 'Duplicate' button on the screen and then create copies of the first line item created using XVBAP etc. But we are not sure what tables SAP hits and what else it does in background. So its not very safe to attempt it this way.
The second option we thought about is by using the SD order creation BAPI.
The real problem is, all this is driven by users and they should have an option to choose what line items they are going to duplicate.
Is there a better, optimized way to do this ?

You are right. I've done it in the past and it is not simple (at least it is something that you can screw up a lot if not done properly).
Here is what I recommend:
Run an example transaction in SE30 (Runtime analysis) or debug. (ask a developer to do that)
Monitor which form is used by SAPMV45A to fill up an item when you enter it. You should try to mimick the SAP standard. Use the same form. That all should be done within your user exit (like mv45afzz). I can'te remember right now what is the name of if but there is an include where you can put your own fcode processing for the additional data A and B screens. Use one of them to add your buttons.
Good luck!
Leonardo

Field added in Aditional data tab of sales order line item at screen 8459

Hi all,
My problem is .
I have appended one field in VBAP table, given it a name "WBS ELEMENT"
The field is getting displayed in VA23 as well as VA02 Transaction.
when i create sales order with the quotation reference,
the "WBS Element" of line item of quotation should get updated in "WBS Eleement " of sales order line item
This i am doing by triggering user exit.
Problem is:
Once Quotation line item get copied to the sales order line item
and the screen is in front of you with those details,
before saving sales order .
if you go at the sales order line item withou saving the document
The field i have created in the screen 8459 i.e WBS Element ,doesnt get displayed.
how could i retain the field Ihave created on screen 8459
while creating the sales order from quotation before saving that sales order.
Pleas help .

Hi Vikram,
It seems as it has been coded only to save the values into the new field that you have appended to VBAP. But before saving if the user wants to see the field, it is blank. You can try coding in PBO (process before output) of the relevant screen as follows:
1. Get the reference of the quotation. Something like XVBAP-VGBEL will give this number.
2. Get the value of Z field in VBAP by passing this quotation.
3. Copy the above value to the corresponding Z field in XVBAP (or any internal table which holds VBAP data before saving)
Please reward if helpful.
Regards,
Krishna

Sales Order Line item category not getting Re detemining Correctly

Dear all,
            I need help regarding the Sales order item category redetermination.
            we are having two item categories YNAE and YNAG and it contains schedule line categories CP and CB ( i.e for item         category YNAE schedule line category is CP and for item category YNAG schedule line category is CB),
for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
         Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and it is working fine .
         But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule line on SAVE and its delivary dates are also not getting determined properly. If i press the option ATP check at the schedule line level than very things will getting corrected.
   I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
Regards,
Vaddepally Manoj

USEREXIT_PRICING_PREPARE_TKOMP is the wrong location - that exit is for pricing communication preparation only. Your primary location for item category determination is USEREXIT_SOURCE_DETERMINATION (MV45AFZB). In your simple scenario, you could consider making an availability check at this point with some assumptions and then assign the item category accordingly. Otherwise, you can re-assign item category and schedule line category in USEREXIT_MOVE_FIELD_TO_VBEP. The exit is called once before ATP (for ATP-relevant schedule line categories) and once afterwards. The call is recursive if you re-assign another ATP-relevant category.

Order - Line item doesnot exit

Similar Messages

Maybe you are looking for