Order not Generating requirements - Urgent

I have an issue where an sales order has been issued for a part that is supposed to drive material requirements however. Requirements are missing.
any help would be appreciated.
Thank you

Go to VA02, there double click on the line item and go to "Schedule lines" Tab page, there check what is the "Schedule Line category" if it is CN or CV something like that then it will not appear in MD04, it should be "CP".
If it is any Z* schedule line category then go to VOV6 and check whether "Req./Assembly" is active OR not, it should be activated to appear in MD04.
Also check "Checking Group" in material master.
Also Check OVZG - Check Requirement Class, Under Requirements Subscreen, Req.transfer is active OR not, it should be active.

Similar Messages

Third Party Sales Order not generating a PR when going on Credit Block

Hello Generous People,
We are having a problem with creating 3rd Party Sales Orders and generating a PR when the customer goes on a credit block and the is subsequently released from there credit block. The system enters a loop of creating a PR and then deleting it once the sales order saved and then place the sales order back on credit block. The Credit Management system has been setup to cause a block for certain fields.
We have looked at the OSS Notes that are recommended by SAP, for example 100861, 396791, etc. However we are implementing SAP ECC 6.0 with all the latest updates. I was looking at OVB5 and VOFM, but I have had no luck with these as well.
Thank you in advance for your help or advice.

Hi Jurijs,
Have you checked LVKMPFZ1, LVKMPFZ2 & LVKMPFZ3 to find out if there is any code for credit checks and blocks in these user exits. Also please check FORM USEREXIT_AVAIL_CHECK_CREDIT under include MV45AFZF to find out if there is any code which is entered to not allow the availability check for blocked sales orders and therefore stopping the transfer of requirements inthe form of PR generation.
Don't worry about going into ECC 6.0. Once you will start the upgrade process on ECC 6.0, you will come to know a set of transaction codes which you can run into the system to find out the non standard ABAP code changes which exists in your SAP landscape.

WF70 : Transfer order not generated

HI Gurus,
I have a collective purchase order for cross docking articles and have done GR for it.
In TA WF70 when i try to create a transfer order (I entered my PO and distribution centre in selection screen),i get the error 'No distribution data found for the data entered'.
Now when i checked my Purchase order in FRET table,I do not find any entry.
For creating a Transfer order in WF10, is an entry for the PO required in FRET table?
If so, can a Purchase order have an entry in FRET only through WF10 (collective PO creation)?
Please help since it is an urgent issue.
Helpful answers will be rewarded.
Thanks and regards
Alice

Hi,
Easiest way to find out is to manually create the TO through LT03 and see what the system comes up with. If no source bin is determined, you can run the determination log from the menu (within LT03).
I always set up mail alert in the WM mvt's which results in an express message with details about the error.
MdZ

F110 Posting Order Not Generated

Hi
I am using F110 - Automatic Payment Program. Payment run has been carried out but not able to generate posting orders.
Kindly help in resolving the issue.
Regards
Sonica

Hi,
I am not able to edit the payment proposal & below is the error message that pops up :
Company codes 1001/1001 do not appear in proposal 05.03.2008 ABCDE; correct
    Message no. FZ003
Diagnosis
    No data exists for the specified paying company code 1001 and the
    specified sending company code 1001 in payment proposal 05.03.2008
    ABCDE.
System Response
    The payment proposal cannot be edited.
Procedure
    Check the flow trace and payment proposal list in order to determine why
    the specified company codes are not contained in the proposal.
kindly assist.
Regards
Sonica

Production order status DLV generating requirements

Hi,
I have a production order of Material F. Bom is C, D, E.
C has item category L , D & E have item category N.
Production order's Status is DLV.After MRP run, system is again generating requirement for its child part C. What I noticed is, in the production order components overview, tfor D & E , two individual purchase requisitions are created which are yet open.( Not yet converted to PO ).
Please tell me is this open PR causing MRP to generate requirement for child part C again?
Regards.

Hi,
C is not issued, it is in COGI. But this does not mean DLV production order should generate requirements. All the order quantity is already produced and GR done.
D and E cannot be issued because it is non stock item. Its Purchase requistion is still open!
Please tell me what is causing requirements to be generated even though production order is having DLV status? If I do TECO to this order, then no requirements are generated. But why should I do TECO, DLV status itself should stop generating requirements, I believe..
Guys, any clues...
Regards.

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

To Generate Requirement numbers Sales Agent wise for Orders

Hi Experts,
i have small requirement searching for one BAPI for below requirement:
i have one MAM order, once we go JHA2N, after you select any one item for that order, in SALES AGENT Tab, it has multiple SALES AGENTS, each sales agent can have multiple Requirement Numbers.
we have written a user-exit to generate Requirement numbers automatically.
once we save this order in JHA2N, sales agent with respective requirement numbers will generate automatically(it will done via our user-exit, this user exit will generate Requirement numbers from Configuration level)
Now we are planning to write one program to mass updation with these sales agent and corresponding requirement numbers,
Here which BAPI we can use to fill above requirement and what type of parameters we can pass,
I tried with the BAPI "BAPI_ADMGMTSO_CHANGE" but our user-exit is not triggering.
User exit name is 'EXIT_SAPLJHAK_001'..
Please help somebody on this.
(I don't know the same can post in ABAP General , that's why posting here)
Sri

Hi,
this is configration issue, if one requirement has beed assighed to some particular ordres, it will take automatically when it is saved,...
just we need to open and save the order...it will trigger the BAPI and save with the requirement numbers..
Sri

COPA document not generating - very very urgent

Hi to all,
I configured COPA and our scenario is Make to order.
While doing of billin copa document is not generating.
I went to KE4S to transfer billing documents to copa manually it is saying that " document XXXXXXXXXXXX is not profit related and thus could not be transferred.
when I double clicked the error message it is saying that might be below reasons the copa document was not generated.
1. The document type is not profit related, such as inquiry
2. The sales document shows zero for the quantity
3.The sales document has been denied
4.The sales document is locked due to credit reasons
But in our case above 4 messges are not applicable.
Please guide me to solve the issue.
Sateesh Kumar

You said you didn't find any entries in KEAT... you mean there was nothing at all for this Billing?
You need to assign those Condition type in KE4I which you wish to analyse in COPA or which require an account assignment. I would analyse my billing to see if more than one condition types are not "cancelling" the transfer to COPA and hence no COPA document. COPA will not post if the net value of the billing is zero.
Derivation rules need to be maintained only if it has been configured. In all probability, if you are not getting an error for derivation rules, you are in the clear. If the system expects a derivation and doesn't find it, it throws an error.
Hope this helps.
Cheers.

Credit Management- KRML Output not generated for Sales Order ( v.v.u.)

<u>Credit Management - Credit control check at Sales order Level</u>
While saving the Sales order,which failed the Credit check ( As per Automatic Credit Check Settings), there is no output generated for output type KRML, for Partner Fn KB/KM. Normally,If credit check is NOK, then while saving the sales order, an internal mail is sent to the SAP office inbox of the Credit representative ( KB/KM). There is option for an external send also. The problem faced by us is that, the mail is not going in SAP Office inbox in quality server , it is going in developement server.We checked in table NAST that the Output for KRML (o/p type) is not generated. Kindly suggest what could be the reason.
Regards
Sunil Kumar

Dear Mr. Gauravjit,
Thank you for your valuable reply.
At the Extra-Output-Header-edit-goto-det analysis ,system give message as KRML o/p is not generated since Requirement 009 is not being fulfilled. But we checked the VBUK-CMGST = B is satisfied. Still the o/p not generated!
Also , in VV11 we maintained the Cond Records. Still the o/p is not coming.
The output is coming in Devlopment , but in Quality the output is not coming.
Can anybody please help !
P.S. I am colleague of Mr. Sunil Kumar, and reply on behalf of him.
With Best Regards,
Kaustuv

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

Planned order not getting generated at plant level

Hi experts,
When i run MRP for a particular plant in T- code (MD01) Planned order is not getting generated but when MRP is done against a material in T - code (MD02) in the same plant planned order gets generated... Is there any customizing to generate planned order in plant level.....
Regards,
Joseph.
Edited by: joseph5885 on Aug 12, 2010 9:23 AM

Dear Joseph,
No it is not recommended. only in emergance cases this will be done
Usually in MDRE and MDAB will be scheduled before MRP run at background for inconistancies in planning file enries
So the above said t-codes will take care of the same
Added
Refer this link
[Planning file entry;
Regards
Madhu
Edited by: K.Madhu Kumar on Aug 12, 2010 6:53 AM

Accounting Document not generated after Post goods issue in delivery order.

Dear Experts
Greeting of the daays,
Need your help on below issue.
After making the post goods issue ,the system is not making the accounting document.
The error given by the system is as follows:
Material document 12365 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 12365.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
__Solution what I tried to solve this issue ,but not successful.__
__Solution 1- maintain OMS2__
__Solution 2 - maintain OMJJ- movement type 601 - PRCTR is required entry.__
__Solution 3 - price maintain is material master.__
__Solution 4 - OBYC - BSX - 7920 - GLA/c and GBB- VAX and VAY - 7920 GLA/c.__
__Pls let me know if there is any confirgation is missing.__

Hi
Do this checks:
In tcode OBYC check if you have the proper entries.
Go to tcode OKB9 and do the settings for the G/L acc. that you have in OBYC.
To populate PRCTR you can use OKB9 and you can check if you have values in MARC-PRCTR.
I hope this helps you
Regards
Eduardo

URGENT*** Test Client testpoint not generated in WebLogic 10.3.0.0

Hi,
I have created very basic "Java EE 1.5 with support for jax-ws Annotations" web service and deploying in to web logic server 10.3.0.0. I am using Jdeveloper 11g for convert my java file to web service and deploying the same in to WLS directly from Jdev IDE.
Problem is, I cant able to see "Test Client" testPoint in order to test my webservice. When I access my web service via WLS admin console can able to see only "?WSDL" test point at TESTING tab and WSDL is accessible. But Test client is not getting generated.
Please help me, what am I missing here, why the WLServer not generating the test client. Am I missing any setting at server side. Please help me. Below is my web service code.
package edu.ws;
import javax.jws.WebService;
*@WebService(serviceName = "demoWS", portName = "demoWSSoapHttpPort")*
public class demoWS
public demoWS()
public String fullName(String fn, String ln)
String fullName = fn + ln;
return fullName;
WSDL file:
*
*
*<definitions targetNamespace="http://ws.syu.edu/" name="demoWS">*
*<types>*
*<xsd:schema>*
*<xsd:import namespace="http://ws.syu.edu/" schemaLocation="http://192.168.88.131:7001/DemoWebService-DemoWS-context-root/demoWSSoapHttpPort?xsd=1"/>*
*</xsd:schema>*
*</types>*
*<message name="fullName">*
*<part name="parameters" element="tns:fullName"/>*
*</message>*
*<message name="fullNameResponse">*
*<part name="parameters" element="tns:fullNameResponse"/>*
*</message>*
*<portType name="demoWS">*
*<operation name="fullName">*
*<input message="tns:fullName"/>*
*<output message="tns:fullNameResponse"/>*
*</operation>*
*</portType>*
*<binding name="demoWSSoapHttpPortBinding" type="tns:demoWS">*
*<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>*
*<operation name="fullName">*
*<soap:operation soapAction=""/>*
*<input>*
*<soap:body use="literal"/>*
*</input>*
*<output>*
*<soap:body use="literal"/>*
*</output>*
*</operation>*
*</binding>*
*<service name="demoWS">*
*<port name="demoWSSoapHttpPort" binding="tns:demoWSSoapHttpPortBinding">*
*<soap:address location="http://192.168.88.131:7001/DemoWebService-DemoWS-context-root/demoWSSoapHttpPort"/>*
*</port>*
*</service>*
*</definitions>*
Thanks
klogube

Hi LJ,
I did the same. I configured my WLS for development mode by making production_mode = false. But still I cant able to open http://localhost:7001/wls_utc window and so far cant able to test my WS :(
Please check my config file and let me know where else I suppose to make the production mode false!!
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
BP=100
SP=$BP
pushd()
     if [ -z "$1" ]
     then
          return
     fi
     SP=`expr $SP - 1`
     eval _stack$SP=`pwd`
     cd $1
     return
popd()
     if [ $SP -eq $BP ]
     then
          return
     fi
     eval cd \${_stack$SP}
     SP=`expr $SP + 1`
     return
# --- End Functions ---
# This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
# This script initializes the following variables before calling commEnv to set other variables:
# WL_HOME - The BEA home directory of your WebLogic installation.
# JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
# this script to switch between Sun or BEA or just have the default be set.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server. Depends directly on which JAVA_VM value is set by default or by the environment.
# USER_MEM_ARGS - The variable to override the standard memory arguments
# passed to java.
# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
# DOMAIN_PRODUCTION_MODE
# - The variable that determines whether the workshop related settings like the debugger,
# testconsole or iterativedev should be enabled. ONLY settable using the
# command-line parameter named production
# NOTE: Specifying the production command-line param will force
# the server to start in production mode.
# Other variables used in this script include:
# SERVER_NAME - Name of the weblogic server.
# JAVA_OPTIONS - Java command-line options for running the server. (These
# will be tagged on to the end of the JAVA_VM and
# MEM_ARGS)
# For additional information, refer to the WebLogic Server Administration
# Console Online Help(http://e-docs.bea.com/wls/docs103/ConsoleHelp/startstop.html).
ORACLE_HOME="/opt/oracle/middleware/jdeveloper"
export ORACLE_HOME
WL_HOME="/opt/oracle/middleware/wlserver_10.3"
export WL_HOME
BEA_JAVA_HOME="/opt/oracle/middleware/jrockit_160_05"
export BEA_JAVA_HOME
SUN_JAVA_HOME=""
export SUN_JAVA_HOME
if [ "${JAVA_VENDOR}" = "BEA" ] ; then
     JAVA_HOME="${BEA_JAVA_HOME}"
     export JAVA_HOME
else
     if [ "${JAVA_VENDOR}" = "Sun" ] ; then
          JAVA_HOME="${SUN_JAVA_HOME}"
          export JAVA_HOME
     else
          JAVA_VENDOR="BEA"
          export JAVA_VENDOR
          JAVA_HOME="/opt/oracle/middleware/jrockit_160_05"
          export JAVA_HOME
     fi
fi
# We need to reset the value of JAVA_HOME to get it shortened AND
# we can not shorten it above because immediate variable expansion will blank it
JAVA_HOME="${JAVA_HOME}"
export JAVA_HOME
SAMPLES_HOME="${WL_HOME}/samples"
export SAMPLES_HOME
DOMAIN_HOME="/opt/oracle/middleware/user_projects/domains/base_domain"
export DOMAIN_HOME
LONG_DOMAIN_HOME="/opt/oracle/middleware/user_projects/domains/base_domain"
export LONG_DOMAIN_HOME
if [ "${DEBUG_PORT}" = "" ] ; then
     DEBUG_PORT="8453"
     export DEBUG_PORT
fi
if [ "${SERVER_NAME}" = "" ] ; then
     SERVER_NAME="AdminServer"
     export SERVER_NAME
fi
POINTBASE_FLAG="false"
export POINTBASE_FLAG
enableHotswapFlag=""
export enableHotswapFlag
PRODUCTION_MODE="false"
export PRODUCTION_MODE
doExitFlag="false"
export doExitFlag
verboseLoggingFlag="false"
export verboseLoggingFlag
while [ $# -gt 0 ]
do
     case $1 in
     nodebug)
          debugFlag="false"
          export debugFlag
     production)
          DOMAIN_PRODUCTION_MODE="true"
          export DOMAIN_PRODUCTION_MODE
     notestconsole)
          testConsoleFlag="false"
          export testConsoleFlag
     noiterativedev)
          iterativeDevFlag="false"
          export iterativeDevFlag
     noLogErrorsToConsole)
          logErrorsToConsoleFlag="false"
          export logErrorsToConsoleFlag
     nopointbase)
          POINTBASE_FLAG="false"
          export POINTBASE_FLAG
     doExit)
          doExitFlag="true"
          export doExitFlag
     noExit)
          doExitFlag="false"
          export doExitFlag
     verbose)
          verboseLoggingFlag="true"
          export verboseLoggingFlag
     enableHotswap)
          enableHotswapFlag="-javaagent:${WL_HOME}/server/lib/diagnostics-agent.jar"
          export enableHotswapFlag
          PROXY_SETTINGS="${PROXY_SETTINGS} $1"
          export PROXY_SETTINGS
     esac
     shift
done
MEM_DEV_ARGS=""
export MEM_DEV_ARGS
if [ "${DOMAIN_PRODUCTION_MODE}" = "true" ] ; then
     PRODUCTION_MODE="${DOMAIN_PRODUCTION_MODE}"
     export PRODUCTION_MODE
fi
if [ "${PRODUCTION_MODE}" = "true" ] ; then
     debugFlag="false"
     export debugFlag
     testConsoleFlag="false"
     export testConsoleFlag
     iterativeDevFlag="false"
     export iterativeDevFlag
fi
# If you want to override the default Patch Classpath, Library Path and Path for this domain,
# Please uncomment the following lines and add a valid value for the environment variables
# set PATCH_CLASSPATH=[myPatchClasspath] (windows)
# set PATCH_LIBPATH=[myPatchLibpath] (windows)
# set PATCH_PATH=[myPatchPath] (windows)
# PATCH_CLASSPATH=[myPatchClasspath] (unix)
# PATCH_LIBPATH=[myPatchLibpath] (unix)
# PATCH_PATH=[myPatchPath] (unix)
. ${WL_HOME}/common/bin/commEnv.sh
WLS_HOME="${WL_HOME}/server"
export WLS_HOME
MEM_ARGS="-Xms256m -Xmx512m"
export MEM_ARGS
MEM_PERM_SIZE="-XX:PermSize=48m"
export MEM_PERM_SIZE
MEM_MAX_PERM_SIZE="-XX:MaxPermSize=192m"
export MEM_MAX_PERM_SIZE
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
     if [ "${PRODUCTION_MODE}" = "" ] ; then
          MEM_DEV_ARGS="-XX:CompileThreshold=8000 ${MEM_PERM_SIZE} "
          export MEM_DEV_ARGS
     fi
fi
# Had to have a separate test here BECAUSE of immediate variable expansion on windows
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
     MEM_ARGS="${MEM_ARGS} ${MEM_DEV_ARGS} ${MEM_MAX_PERM_SIZE}"
     export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "HP" ] ; then
     MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
     export MEM_ARGS
fi
# IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
if [ "${USER_MEM_ARGS}" != "" ] ; then
     MEM_ARGS="${USER_MEM_ARGS}"
     export MEM_ARGS
fi
JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} "
export JAVA_PROPERTIES
# To use Java Authorization Contract for Containers (JACC) in this domain,
# please uncomment the following section. If there are multiple machines in
# your domain, be sure to edit the setDomainEnv in the associated domain on
# each machine.
# -Djava.security.manager
# -Djava.security.policy=location of weblogic.policy
# -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
# -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
# -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
EXTRA_JAVA_PROPERTIES="-Ddomain.home=${DOMAIN_HOME} -Doracle.home=${ORACLE_HOME} -Doracle.security.jps.config=${DOMAIN_HOME}/config/oracle/jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol ${EXTRA_JAVA_PROPERTIES}"
export EXTRA_JAVA_PROPERTIES
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${EXTRA_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
ARDIR="${WL_HOME}/server/lib"
export ARDIR
pushd ${LONG_DOMAIN_HOME}
# Clustering support (edit for your cluster!)
if [ "${ADMIN_URL}" = "" ] ; then
     # The then part of this block is telling us we are either starting an admin server OR we are non-clustered
     CLUSTER_PROPERTIES="-Dweblogic.management.discover=true"
     export CLUSTER_PROPERTIES
else
     CLUSTER_PROPERTIES="-Dweblogic.management.discover=false -Dweblogic.management.server=${ADMIN_URL}"
     export CLUSTER_PROPERTIES
fi
if [ "${LOG4J_CONFIG_FILE}" != "" ] ; then
     JAVA_PROPERTIES="${JAVA_PROPERTIES} -Dlog4j.configuration=file:${LOG4J_CONFIG_FILE}"
     export JAVA_PROPERTIES
fi
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${CLUSTER_PROPERTIES}"
export JAVA_PROPERTIES
# Clear the pre_classpath here in case an application template wants to set it before the larger pre_classpath is invoked below
PRE_CLASSPATH=""
export PRE_CLASSPATH
JAVA_DEBUG=""
export JAVA_DEBUG
if [ "${debugFlag}" = "true" ] ; then
     JAVA_DEBUG="-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=${DEBUG_PORT},server=y,suspend=n -Djava.compiler=NONE"
     export JAVA_DEBUG
     JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole..."
     export JAVA_OPTIONS
else
     JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -da"
     export JAVA_OPTIONS
fi
if [ ! -d ${JAVA_HOME}/lib ] ; then
     echo "The JRE was not found in directory ${JAVA_HOME}. (JAVA_HOME)"
     echo "Please edit your environment and set the JAVA_HOME"
     echo "variable to point to the root directory of your Java installation."
     popd
     read _val
     exit
fi
if [ "${POINTBASE_FLAG}" = "true" ] ; then
     DATABASE_CLASSPATH="${POINTBASE_CLASSPATH}"
     export DATABASE_CLASSPATH
else
     DATABASE_CLASSPATH="${POINTBASE_CLIENT_CLASSPATH}"
     export DATABASE_CLASSPATH
fi
POST_CLASSPATH=""
export POST_CLASSPATH
POST_CLASSPATH="${ORACLE_HOME}/modules/features/adf.share_11.1.1.jar${CLASSPATHSEP}${POST_CLASSPATH}"
export POST_CLASSPATH
POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${DATABASE_CLASSPATH}${CLASSPATHSEP}${ARDIR}/xqrl.jar"
export POST_CLASSPATH
# PROFILING SUPPORT
JAVA_PROFILE=""
export JAVA_PROFILE
SERVER_CLASS="weblogic.Server"
export SERVER_CLASS
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${WLP_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
JAVA_OPTIONS="${JAVA_OPTIONS} ${JAVA_PROPERTIES} -Dwlw.iterativeDev=${iterativeDevFlag} -Dwlw.testConsole=${testConsoleFlag} -Dwlw.logErrorsToConsole=${logErrorsToConsoleFlag}"
export JAVA_OPTIONS
# -- Setup properties so that we can save stdout and stderr to files
if [ "${WLS_STDOUT_LOG}" != "" ] ; then
     echo "Logging WLS stdout to ${WLS_STDOUT_LOG}"
     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stdout=${WLS_STDOUT_LOG}"
     export JAVA_OPTIONS
fi
if [ "${WLS_STDERR_LOG}" != "" ] ; then
     echo "Logging WLS stderr to ${WLS_STDERR_LOG}"
     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stderr=${WLS_STDERR_LOG}"
     export JAVA_OPTIONS
fi
# ADD EXTENSIONS TO CLASSPATHS
if [ "${EXT_PRE_CLASSPATH}" != "" ] ; then
     PRE_CLASSPATH="${EXT_PRE_CLASSPATH}${CLASSPATHSEP}${PRE_CLASSPATH}"
     export PRE_CLASSPATH
fi
if [ "${EXT_POST_CLASSPATH}" != "" ] ; then
     POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${EXT_POST_CLASSPATH}"
     export POST_CLASSPATH
fi
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.ext.dirs=${WEBLOGIC_EXTENSION_DIRS}"
     export JAVA_OPTIONS
fi
JAVA_OPTIONS="${JAVA_OPTIONS}"
export JAVA_OPTIONS
# SET THE CLASSPATH
CLASSPATH="${PRE_CLASSPATH}${CLASSPATHSEP}${WEBLOGIC_CLASSPATH}${CLASSPATHSEP}${POST_CLASSPATH}${CLASSPATHSEP}${WLP_POST_CLASSPATH}"
export CLASSPATH
JAVA_VM="${JAVA_VM} ${JAVA_DEBUG} ${JAVA_PROFILE}"
export JAVA_VM
Edited by: klogube on Oct 23, 2009 10:58 AM

Output message not generated for Purchase order

We maintain MN04 message condition record for 2 key combination for output type NEU:
1. Purchasing Output determination : Document type -> NB, medium 1 print out
2. Purchasing Output determination : Document type/Pur Org/Vendor -> NB, 1000, vendor 20001, medium 5 External email
When I create PO for other vendor (not 20001), the system is nicely generating the output of the PO for printout.
Next we have maintain a condition record in MN04 for a particular vendor 20001, Doc type and Porg with setting 5, 4, EN so that we can send the PO via email to the vendor 20001, the system is not generating a message output of the purchase order when i check it before saving.
Please help me with this situation. we need setup the email PO functionality.

I created another message type ZNEU copy from NEU, include it in the message schema, created condition record with MN04/MN05 for both NEU for printout and ZNEU for medium 5 email. done all steps mentioned in the links.
When create a PO still only 1 message record NEU is defualted for printout only.
The message record for email ZNEU is not defaulted in PO?? Anything elase need to be done.

Designerd does not generate Order BY code for Sort Order on a lookup tabel column.

I am setting the Sort Order on a column which is based on a lookup table.
When generate the the module, designer does not generate the code for the Sort Order that I set on the lookup table column.
Is there a work around for this problem or is there some thing else that needs to be done in designer to make it generate the order by clause?
I will very much appreciate help.
Regards
Prasad.

A bound lookup item, will be generated as a NON-database item in Forms. Designer generates an ORDER BY CLAUSE (a Forms Block property) for the ordering. But a NON-database item cannot be included in the ORDER BY CLAUSE.
I used a stored function for ordering the lookup item.
Best regards
Harm van Zoest

Order not Generating requirements - Urgent

Similar Messages

Maybe you are looking for