Order number range - Group

Hi,
Client requirement is to maintain different number ranges for each order type.
Whenever I try to create a Group(Menu-Group-Insert). Then Text. Then number range.
I created new group, text,assigned number range but the new group is not coming.
(system is not throwing any warning/error message regarding overlapping)
Kindly share your views where i'm going wrong.
Thanks
Prasad

Hi ,
Whenever we add new group it comes at the bottom ie before Not assigned.
But it's not coming(the new group).
It's coming in Sandbox client but not in Testing client.
Kindly share your views.I'm under pressure from Client....
Pete & Thyaga...waiting for your views
Prasad

Similar Messages

Process Order Number Range

Hi Gurus,
How do you exactly add/create Number Range Groups for process orders?
Thanks,
Kumar

Hi Kumar,
Assigning number range
There are two types of number assignment:
Internal
When saving a data record, the SAP System assigns a sequential number that lies within the corresponding number range interval.
External
When saving a data record, either you or an external system assigns a number. You need to ensure that the number lies within the corresponding number range interval.
In CO82..
Menu path Group -->maintain
In maintain number range group screen,
Group --> insert
Give text and from number and to number
say text = new order say For FG
range - 1xxxxxxxxx to 1999999999999 (tick ext check box if the range is external number range-manual input)
click on +
You can see your group at the end of list
In Not assigned group your new order type will be present
Place the curser on that order type and fallow the menu path as below
Edit -->select element
Select NEW order number range group check box
edit --> assign element group.
Now the number range is assigned to the order type. Save it, You will get a pop up, just ignore it.
Please try and come back.
Regards
R.Brahmankar

Delete a number range Group in internal order

Dear experts!
Now, I'm getting some issue about maintain number range group in internal order.
So I defined a number range group, after that I want to delete the number range group. How do I have to do?
Best regards, Huy

Done the question!

Maintain Number range group for Internal order

Hello,
I have created Internal order type, now, i would like to create/maintain the number range group for this already created order type.
When i goto Maint Number ranges for orders->click on Group->Maint and again click on group insert... when i mention here the group name and number range for that group and say save the system in accepting but when view all the groups, i do not find this new group created by me.
How do i view the newly created group, is there any other steps to be followed? please advice.
regards,
radhakrishna

Hi:
It's a little late for this post but it is still important to record.
When you try to create a group in KONK transaction, the system doesn't show the new group.
This is because there are a inconsistences in the old groups.
You must execute RSSNR0T1 program to solve the problem.
Greetings
Marco

Order number range not define

Hi Experts,
when i create a production order system generate error massage " NUMBER RANGE NOT DEFINE ".
I have maintained OPJH (Number range also) and i have maintained CO82.
and order type also assign to number range group .
when i create production order in particular plant(1100) with same order type(PP01) then generate a error massage but when I create production order in other plant(2100,3100,4100) with same order type (PP01) then not a problem.
OPJH, OPJK, OPU3, OPL8 also maintained in this plant(1100) for this order type
Please suggest me
Thanks in advance............................

Please do the following
1. Double check in CO82-> Change number groups -> Double click the Production order type (PP01) change the number range & save.
2. As you specified its working well for the other plants 2100,3100,4100. Please check in OPL8 whether the plant 1100 is assigned to the specific order type or not. But CO82 is not plant specific its global change of number ranges for all the plants.
3. Finally if you are trying this with in development system, check with the basis whether the transport reqeust will take time to update.
Check and revert back.
Regards,
Sundhu

Why after new changes in internal orders settings order number ranges lost?

Dear Gurus,
We have noticed that order number ranges are being lost from time to time.
Than we have analysed that sometimes it happens after new transfers with new orders settings.
Why the system behaves like that?
And how can we avoid this problem?
With best regards,
Kamila.

The process is as below to assign/change number ranges to order types
Create Order type at KOT2 (KOT2_OPA) and enter Order Category ...say 01
Enter Order type name and description and SAVE
Select Number range Interval assingment Icon
At last row of the number range screen you can see your newly created Order Type
(Put the cursor on your order type and press F2) and Select the check box of group under which you need to assign and press F5
Now the newly created order type has been assigned and new number range has been assigned
So you can change existing order type also as mentioned above (even after posting made to that order types)
This could be the reason for changing number ranges to order types
Please take care while assigning number ranges to a new order types. Do not touch number ranges of existing order types
Srinivas

PM order number range

I have 8 types of PM orders and I want to define separate number range for each
PM01 - 910000000 to 919999999
PM02 - 920000000 to 929999999
PM08 - 980000000 to 989999999
I have tried to insert new group for these number range. But it is not showing the group in the system.
Where m I mistaking ?
I have done same with notification number range it is happening there.
Regards,
VM
Edited by: V M on Jul 2, 2008 10:46 AM

Hi
Pls See the steps below
select the number range in SPRO
1.Click Change group Icon
2 Select group in application tool bar and select insert
3.Give Your number range
4.Give short discription
5.Click Select icon next to red cross icon
6.Now select your order type and under non assigned
7.Select the new number range group
8.Enter select
This way your oder type will be assigned to the new number range
Follow sam procedure for rest order type
Regards
Anil Kumar
Anil Kumar

Maintenance Order Number Ranges.

Hi Gurus,
I am working on the configuration of the Maintenance Orders for my client. I am trying to create 5 different number ranges for the five different order types to be used for five different processes. I have created the number range groups but strangely enough the groups are not visible in the list. Can you please suggest what should I do and where am I going wrong? I am creating the groups ( which are visible when I try to create new ones) from menu bar--> groups and insert.
Thanks in advance.
Anoop

Hi Anoop,
As per the referred case, what the system does is that the number range interval created while creating the new number range group gets assigned to an already existing number range group because there are several number range groups already defined, having no number range interval assigned to them so whenever a new number range interval is added, the number range interval gets linked with the already existing groups despite assigning the number range interval to the newly created group. The system does not even create the new number range group. For this you can change the text of existing groups or else assign each group with an interval and then start creating new groups with the desired number ranges other wise it would not create the group but the number range interval would definitely be created.
Regards,
Muhammad Usman Kahoot
Edited by: Usman Kahoot on Nov 8, 2011 6:28 PM

Costing Variant not assigned to Number Range Group

Hi,
I have an error while doing Sales order costing. When i create Sales order and do costing for it (Ctrl+F7) it give me an error,
"Costing variant XYZ is not assigned to a number range group"
Where do i need to assign the costing variant to a number range group.
Please advise.
Thanks in Advance,
Safi

Hi Ramana,
Thanks for the reply.
I have mainted the number rnages in VN01.The issue still persists.
Safi

Service order number range creation

Hi,
Could anyone please tell me how can we create service order number range if we have done a new service order type creation, and what should we do: should we create the number range in development and then transport it to the production or we should directly create it in production.
Thanks and Regards

Hi,
Please guide me what should we first do to transport the service order type transport request to prd.
1.Should we first transport the request for other components of the service order type?
2.Then should we transport the request for number range or we directly create it in production server?
Please guide.
Thanks and Regards
Edited by: MPVash Vash on Sep 8, 2008 7:53 AM

Planned Order Number Ranges

Hi Gurus,
I am having two plants defined in one company code.
Is Planned order number range plant specific?
My planned order number range in plant-1 is 1000-2000 and it is same in the Plant-2. If I create the planned orders in both plants.
What is starting number for planned orders in each plant?
Can I create like this?
Thanks in advance.
Regards,
Jejesh
Edited by: jejesh yal on Sep 30, 2008 9:25 PM

Hello,
If you are creating Planned order using the MRP, you can set the plant specific Number range for planned Order at OPPQ
Please check with planned order Number range tab at OPPQ
Regards
Pradeep

Demerger Purchase order number range.

Hi Friends,
We have demerger of 1 of hte business of the company & new entity will be using same client which we are using.
We will be Creating new Purcharse orders with open amounts for new legal entities.
Here requirement for purchase order number range is as belows. How can we achieve this.
Our advice for number range is to use a prefix + old PO number, to ensure the incoming invoices can be easily assigned.
Thanks,
Kiran

HI,
   You may define external number range as shown below, for example:
   Assign the same as external number range for the PO Doc type:
   While creating the PO, maintain the number range externally with the required prefix + old PO number.
Test the same and revert back.
Regards,
AKPT

Planned order number range in apo

Where planned order number range can be maintain in apo.
I am converting agreed plan into planned order but planned order number has generated.
Please somebody tell me.
Regards,
Sunill

Planned order number ranges can be maintain in
sproaposupply chain planningppdsglobal settings--maintain number ranges for orders.
and then you assign the number ranges in
sproaposupply chain planningppdsglobal settings--maintain global parameters and defaults (in planning tab )

How to transport number range group Configuration in Material Master

Hi,
I have this query regarding how to transport number range group in material master from one server to another.
Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
Can anybody help me with this I hope the query is clear.
Regards
Vivek

Hi,
Number range objects can be transported using Workbench requests.
Thanks
Kishore

Best Practice for Change Maintenance Order Number Range

Hello
We have decided that our Maintenance Orders will always start with the year of the open date. Example 201112345155
Every year we will need to change the number ranges
What is the best practice to change the order number range? What is the best approach here?
I have also another question. Why the "Current Number" is not incremental?
Thanks for the help

Hi,
The current number can be explained by use of buffering of the numbers. Buffering is defined via transaction SNRO, the AUFTRAG object is relevant for orders. When buffering is active, a set of unused numbers are assigned to each application server.
In your example - The fiirst 20 numbers were taken from the available number range and assigned to the buffer (possible 10 numbers to each of two servers). As orders are created a number is assigned from the buffer. Once the buffer values are used a further set of numbers are taken from the number range and the current number is increased (by buffer value).
-Paul

Order number range - Group

Similar Messages

Maybe you are looking for