Order of addresses in email

When I start entering an email address TB tries to help by giving me some likely addresses. But they don't always seem to be in alphabetical order. I might try entering someone starting with B and most of the B's are shown - but not all. Why not?

I beg to differ with Matt. Here it seems to look for your string at the starts of words in both the display name and the email address. It seems also to be looking at nicknames in the same way - it uses "starts with", not "contains" nor "ends with".
I have no idea what it does with underscores or punctuation or stuff like braces and brackets; I scrupulously avoid these and other characters such as slashes and asterisks which tend to have metadata status in filenames.

Similar Messages

  • How can i change my order shipping address~

    I'm now being abroad , my family moved to NY from CA a few days ago ,but my order shipping adress was still my CA address ,how can i change my order shipping address except phonecall ,can someone please give me the apple serve Email which can chage my shipping address before Oct 8th when the product post~
    thx a lot!
    my email ad:[email protected]

    Have you tried to change your address with DHL? I think that will solve your problem if changing address with Apple is so hard, or too late at the moment.
    And I suggest you to call instead of sending emails, it's way more efficient. I know you are in China, but I don't see why you can't make a phone call from there.
    In addition, you can try track your DHL shipment via this service, http://dhl.trackingnumber.org/, it shows the location on a map.

  • I cannot send email - error message as follows : 'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk.' I can send email from other apple devices, and the email settings are identical. Any ideas?

    For some reason I cannot send email - all was working fine, but now I get the following error message when I try to send email:
    'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk'
    I can receive incoming mail ok and I can send email from other Apple devices. The problem seems confined to my Mac Book Pro.
    Ant ideas?

    Hello there, Pablo639.
    The following Knowledge Base article offers up some great steps for troubleshooting mail issues on your Mac:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have a problem with mail autofilling info email addresses. Emails sent to me the from looks like this: Holiday in the United States email address . I have no idea what this Holiday in the United States is...How can I fix/change to my name?

    I have an irritating problem with mail autofilling info in email addresses. Emails sent to me the from looks like this: Holiday in the United States <my email address>. I have no idea what this Holiday in the United States is or how it got to be there...How can I fix/change to my name?
    I fixed the To: autofilling incorrectly by deleting my email address from the Previous Recipients List, but is there a way to stop that from coming up on emails that I receive?

    Have you checked your Mac address book? If your email is saved somewhere in your address book with the name "Holidays in the United States" it might be adding the name automatically in Mac Mail.
    Alternatively, try this:
    Delete an Email Address from Auto-Complete in Mac OS X Mail
    To remove an email address from the auto-complete list in Mac OS X Mail:
    Start typing the recipient's address or name in a new message.
    Select the desired address from the auto-complete list as if you'd compose an email to them.
    Click the small down arrow in the recipient.
    Select Remove from Previous Recipients List from the menu.
    You can also search for the unwanted address directly in the previous recipients list:
    Select Window | Previous Recipients from the menu in Mac OS X Mail.
    Highlight the address you want to remove.You can highlight multiple addresses by holding down the Command key.
    Click Remove from List.
    Source: About.com

  • HT4519 sometimes when I send a mail it will go regardless of location or whether it has attachments, but more often than not they won't go and the message " a copy has been placed in your outbox. The sender address "my email blah blah was rejected by the

    Sometimes when sending a mail it will go more often it won't go, it doesn't seem to be relevant  to my geographic position and the message" a copy has been placed in your Outbox. The sender address" my email blah blah" was rejected by the server"     . Any ideas?

    Check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • Update address-dependent email field on save of BP

    We have a requirement to update the address-dependent email field from the address-independent email field upon saving a Business Partner.
    I've been working on the 'BUPA_ADDR_UPDATE' BADi but am having no luck with it so far. I have managed to retrieve the data in the address-independent email field using the 'BUPA_CENTRAL_GET_DETAIL' Function Module but as yet have not been able to do the update of the address-dependent email field.
    Can anyone offer any guidance please ?
    thanks,
    Malcolm.

    Hi Malcolm,
    Try using the BADI : ADDR_UPDATE.
    Email is a part of the address management, so you would need an address badi.
    BUPA_ADDR_UPDATE is a business partner badi and only has the address reference - such as address number, validity, move date, etc..it will not help in cases where you need to work with address fields such as city, country, email,etc.
    Another approach :
    Try writing your code in PARTNER_UPDATE badi. This is called after save of BP. So you can probably trigger another update on the BP's address from here..
    Hope this helps you.
    Cheers,
    Rishu.

  • Iphoto allows you to share photos by selecting them and then emailing as an attachment.  I'm not able to do that now, curser isn't appearing in the email address box when I attempt to address my email.  Photos are attaching but not able to include an addr

    iphoto allows you to share photos by selecting them and then emailing as an attachment.  I'm not able to do that now, curser isn't appearing in the email address box when I attempt to address my email.  Photos are attaching but not able to include an address.

    Windows Phone 8.1 is so full of surprises and opens the Windows Phone faithful up to a new world of apps.
    Video editors and
    file managers are just some of the new app categories possible thanks to Windows Phone 8.1. We’ve seen an official video editing app from Microsoft already, but today we finally get Files – the official file manager for Windows Phone.

  • Urgent:: regarding purchase order group address

    hi all.
    i need to know in which table can i find the Purchase Order Group address details...
    waiting for ur reply asap..
    thank u.

    hi this is me again ...
    please let me know the tables that r required to fetch the address details for PO.Group
    it's very urgent..
    i have the tables adrc,t024,etc..
    but they r not related to it....
    waiting for ur reply...
    bye.

  • How to pass payable or ordering vendor addresses using basic type CREMAS01

    Hi there!
    have a query on how to feed payable and ordering vendor address details to an existing basis type CREMAS01. multiple payable vendors can be existed under one ordering vendor . Currently both OV, PV are being populated at purchase org level and thus both details available under segment E1WYT3M of E1LFM1M. however E1WYT3M doesn't have address related info.
    We would like to send all payable vendor address details associate for an ordering vendor via existing CREMAS01 Idoc. Can someone please let me know what are all technical ways to fill address in existing Idoc type? if possible, please share any document to achieve this req. I'm also surfing web at same time.
    Thanks in advance.

    Thanks for the reply.
    The blog talks about specifying the username token policy or specifying the credentials using username and password properties.
    What I need to do is pass something like this :
    <Authorization>Basic Yw377jbkjbaiudjuo3u=</Authorization>
    where,
    Yw377jbkjbaiudjuo3u= represents Base64Encoded combination of username and password separated by colon(:) [username:password]
    I have set the bpelx:inputHeaderVariable=Authorization under Invoke of MyBPEL.bpel and have used Assign activity to pass Basic Yw377jbkjbaiudjuo3u= as the Authorization value, but it is not working.
    In addition, I also tried setting the  <property name="oracle.webservices.http.headers">Authorization</property> in composite.xml for the reference service but it doesn't work.
    Can you please help me in figuring out what am I missing? Is there any patch that has to be applied for this to work. I am using SOA 11.1.1.5
    Please help

  • How to set FROM ADDRESS for EMAIL activity in Process Flow

    Hi all,
    Can any one tell how to set(which address) FROM ADDRESS for EMAIL activity in Process Flow?
    Thanks,
    Suvvi

    Did you set what OWB guide says:
    To execute a process flow with an email activity, you may need to access different host machines and ports. New security measures implemented in Oracle Database 11g Release 1 restrict access to hosts and ports. You must explicitly grant access to hosts and ports that the email activity accesses using the DBMS_NETWORK_ACL_ADMIN package.
    For example, the user OWBSYS needs to send an email through the mail server mail.example.com using port 25. The DBA must perform the following steps:
    1. Create an Access Control List (ACL) for the user OWBSYS using the following command:
    EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL
    (’acl_for_owb_cc.xml’,’ACL for Control Center’,’OWBSYS’,’CONNECT’);
    The ACL has no access control effect unless it is assigned to network target.
    2. Assign the Access Control List (ACL) to a network host, and optionally specify a TCP port range. Use the following command:
    EXECUTE DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (’acl_for_owb_cc.xml’,’mail.example.com’,25)
    3. Commit the changes made using the COMMIT command.

  • What determines the address iCal email reminders are sent from?

    *What determines the address iCal email reminders +are sent from+?*
    On our g4 iMac, running Tiger, my wife has multiple pop3 email accounts. 6 to be exact.
    She only has one address listed in her address book, and that is her own main primary address.
    She recently started using iCal email reminders for reoccurring events. At first she was getting emails from her main address mailed to her main address. Works as planned.
    But recently, she is getting reminders emailed to her main address send from one of her other POP 3 email accounts. This is not desirable. She needs them to come from her main address, the one that is her primary account and is listed in the address book. She is not sure what caused this change or why.
    So the question is, what determines the address the email reminder is sent from and how can you change this to another address.
    THX

    Yes, that's what I thought too.
    There is only one address besides the "APPLE" card in her book, and that is her primary address, and unfortunately, NOT the one her reminders are coming from.

  • I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once.

    I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once. Can you please help?

    Restart your Mac. See if that makes a difference.

  • ICloud mail is down again...mine allows mail to open, then when trying to address an email I get a beach ball and it stays until I quit mail.  Anyone experiencing this and what is apple doing about this?

    I like many have been experiencing mail problems since I migrated to iCloud.  Was working fine for a bit, then I now either get crashes or a revolving beachball when I attempt to type an email address.  Have tried quitting and rebooting...you name it.  What is Apple saying or doing to fix the problem.  Been like this all weekend.

    iCloud mail is down again...mine allows mail to open, then when trying to address an email I get a beach ball and it stays until I quit mail. 
    That doesn't necessarily mean the mail is down in iCloud.
    You can always check iCloud system status here.
    If you are using Safari to access iCloud.com, go to the Safari menu bar click Safari / Empty Cache.
    Now go the menu bar again and click Safari / Reset Safari.
    Select the top 5 boxes then click Reset.
    Quit then relaunch Safari, go to iCloud.com
    Try Mail.

  • New OS Issue -----10-27-13 I downloaded the new OS to my MacBook Pro. Now, when I address an email, it puts the address in there twice.

    10-27-13 I downloaded the new OS to my MacBook Pro. Now, when I address an email, it puts the address in there twice. How do I stop that, please? Thank you

    Thank ypu for your thought.
    Yes, I do have it turned.
    When I type the first few letters of the address, it shows the correct address. When I hit <enter>, the name appears in the address section twice. Only began to happen after the downloaded update.
    Cheers,
    Joe

  • How do I clean up all addresses on email that I am trying to forward to someone

    How do I clean up addresses on email that I am trying to forward to someone else,

    Not quite sure what you mean by clean up. If you tap an email address in a message that you have received, you can create a contact in the contacts app from the window that pops up.
    If you are asking if you can remove addresses from that email and forward the email to only those that you select, you can tap the curved arrow icon and select reply all - then tap the CC field, then tap the address that you want to delete, then hit the X delete key on the keyboard to remove that email address.
    You can add more addresses by tapping the blue + button to bring up your contacts and select more addresses in there.
    Message was edited by: Demo

Maybe you are looking for