Order of buttons

I have imported an FCP project with chapter markers into iDVD. It looks great and the chapters work, but on the menu, when skipping from scene selection to scene selection with the remote, it jumps around instead of going from top left button to bottom right button like I want. Even if I physically move the buttons to the places I want, the selection order jumps around.
any clue how to remedy this? I thought it had to do with the order in which I create the markers in FCP, but that doesn't seem to matter.

Thanks for the reply Hussein. I didn't see anything regarding this in the documentation so I may possibly log an SR. Just wondering if anybody else has ran into this problem or noticed this before I go the SR route. Thanks again!

Similar Messages

Extremely slow when clicking the Specified Order - New button.

Post Author: cavenger
CA Forum: Charts and Graphs
I often use the specified order option on charts to group pieces of information together. When I click the New button for a new specitied order or if I try to edit an existing specified order, it takes forever for the dialog to come up. I have experienced this problem in both Crystal 9 and 10 installed on different machines. Is there some sort of option I am missing? Maybe something that tells it to query the database. I have no idea why it would do a query at that point, it is not like I am using a select list of options from a drop down where it would need to retrieve the values. The reason this is a problem is that it takes me forever to run reports when I am asked to an add hoc report that requires this sort of customization. VERY frustrating....TIA for all help.

Post Author: RichardN
CA Forum: Charts and Graphs
I'm having the exact same problem. I think what's most infuriating about this is after waiting several minutes for the "Specified Order" Tab to display, I have to wait several more minutes after I click on the New button. This happens everytime I click the New button, and I have eight groups to create.
I'm using Crystal Report XI Release 2 on Vista with 2 GB of RAM trying to access a Progress database using an ODBC connection.
Is there ANYTHING I can do to speed this up? Is it possible to use the "Formula Editor" to essentially write out the information the Group Options window is creating?
Thank you,
R

Establish order that buttons appear in an interactive PDF buttons when the buttons overlap

I have a button that when you roll over it a map appears and when you click the same button a menu appears. The image and the menu overlap one another. At the moment the image is appearing to over the top of the menu even though is is below it on order when in indesign. Can anyone help please? Can you order the appearance of buttons?

There are no rollovers in DPS. Are you sure you’re in the right forum?

Order of buttons on quick sales order header

Hello,
We recently applied the december 2009 OM rollup patch in one of our development environment for testing and came to find that the order of the buttons on the quick sales order form OEXOETEL was changed to alphabetical ordering. So the only way we can restore the original order that they were in before the patch is to pre pend 1,2,3,...to the user entered prompt name when you go to folder-->save as... . I can't seem to find any kind of information on metalink or the forums. Is this expected? and is there a better way to get the buttons back in the same order other than pre pending numbers to the button labels? Thanks in advance to any repliers!

Thanks for the reply Hussein. I didn't see anything regarding this in the documentation so I may possibly log an SR. Just wondering if anybody else has ran into this problem or noticed this before I go the SR route. Thanks again!

Order Prints button disabled Yosemite, iPhoto 9.6

I tried to order prints today and found out that I can't the order button is disabled. How can I re-enable the button?
Notice the image behind on top, is selected, but the Order Prints is disabled.

Do you still have the original library that you used iPLM to rebuild. I as because I didn't see anywhere that you used iPhoto itself to repair the database. If you still have it try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

Button order and routing from PS menu not working

Ugh, this is driving me crazy.
When authoring a Blu-ray, I've gone through the same steps since I started but all of a sudden the menus I'm creating in PS CS5 for Encore CS5 are not working and for the life of me I can't figure out why.
The problem I'm having is that I set everything up in Photoshop then import the menu into Encore however when using the navigation of a remote, scrolling down skips some buttons and doesn't cycle through them normally.
For example, let's say I have eight buttons defined in a PSD.
1
2
3
4
5
6
7
8
When I preview or do a test burn, the highlight will stop on 1 and 2 but skip 3 and 5 and other random button definitions. And then when it gets to the last, it doesn't cycle back to the first.
I have everything set up correctly as far as I know - group layers prefaced with (+), highlight cursor prefaced with (=1), etc. And the order looks good in Encore.
Extremely frustrated, anyone else having this problem in CS5? I can up the PSD if anyone wants to check it out.
Thanks,
Tom

Can you post a screenshot of the menu with button routing on?
I second Stanley's request, and please Crop into that area, and also Save your JPEG, or PNG, with adequate resolution for people to see the numbers on your Button Routing. Also, if you have any specific desires for the order of your Button Routing, please define that.
Note that En will Automatically Route Buttons, based on their Layer Set Order in PS. If you have done some moving around of the order of Button Layer Sets, or have done some Copy/Duplicate, then what you think the order should be, but it might not be so. En will start at the bottom of the Layers Panel, and assign the identifier, Button 1 (regardless of what name you might have assigned), to the lowest Button, and working up, one Button Layer Set at a time, until it reaches the top. Can you also post a screen-cap of your Button Layer Sets (can be closed for a clear shot of the entire Palette), with the Layers Palette showing clearly, and the image with the Buttons showing near by? That could also be very helpful.
Good luck,
Hunt

Acrobat Forms: "Rush Order" Button

How do I create a button that shows the image "Rush Order" when clicked and hides the image when clicked a second time?
So far I have figured that I need three buttons to acomplish this...
One button that is hidden and has the "Rush Order" image shown on "up".
One button to show the "Rush Order" image button.
One button to hide the "Rush Order" image button.
It's odd that I can't have a button with an icon that becomes visable when clicked and stays visable untill clicked a second time.
Anyone know how to do this easily without three buttons?
Thank You!
Jeremy

2 buttons are certainly enough. Let's say the image button is called "Image". Then you use this code as the other button's MouseUp Run a JavaScript code:
var f = this.getField("Image");
f.display = f.display==display.visible ? display.hidden : display.visible;
That's it...

Buttons out of order

For the past month or more, I have been creating my first iDVD project. It's a compilation of many iPhoto slideshows set to music, some quicktime videos, some "page flipping" slideshows of imported albums from iPhoto.
I worked on this project randomly and added, enhanced, etc. as I continued to learn what iDVD could do. Now I see that all my menu selection buttons are not in the order I wish and I read that I can't re-order the buttons.
There HAS to be some sort of work-around for this that someone has found. I really don't want to re-send everything to iDVD just to arrange the button selection order.
Would it work if I created a new sub-menu, move the buttons in the order I wish to the new menu and delete the original?

For earlier versions of iDVD there was a script called iDVD companion
http://www.apple.com/applescript/archive/idvd/companion.html
which did exactly what you want, but I cannot guarantee it is still available, or that it will work with Leopard.
It definitely worked with iDVD 6 on Tiger.

Dialog box buttons appear out of order

Hello,
I am developing my app using a Firefox browser & Windows. I have a Javascript pop-up dialog box with OK and Cancel buttons (appearing in this order, OK button to the left of Cancel). When I run my app using Firebox & Unix, sometimes the button order shows up as Cancel and then OK. This has lead to people clicking the wrong button because they are used to seeing the OK button to the left of the cancel button. Is there something I need to do so that when my app is run on a Unix box that the buttons appear consistently with the OK button to the left?
Thanks, Laura.

Has anyone else experienced this behavior?

I bought an iPhone5 in the US Apple Store using "guest checkout". Now I must CHANGE Ships TO adress, because I forgot apartment number in adress. if I login with my Apple ID, it says that I don't have permission to open that Order. Any ideias anyone?

I bought an iPhone5 in the US Apple Store using "guest checkout".
Now I must CHANGE Ships TO adress, because I forgot apartment number in adress.
if I login with my Apple ID, it says that I don't have permission to open that Order.
Any ideias anyone?
Tnx

At official Apple page's I found this:
With our Guest Checkout feature, you can check out on the Apple Online Store without an Apple ID or password. Simply add the items you would like to purchase to your shopping basket, enter your shipping and payment information, and click the "Place Order Now" button.
You will be able to visit online Order Status to check your order status and track shipments.
To cancel items, add items, or make changes to your order, please call 1800 88 20 45.
What number I must dial?
1-800-My-Apple or 1800 88 20 45
Thx.

Table For Open Sales Order And Customer Invoices

Dear Gurus,
Are there any table to know open Sales orders and pending invoices for Customers?
Wishes,
Abhishek

Hi,
Go to T code VA05 and select open sales order radio button. Put other input parameters like date range or sold to . Execute you shal get list of all open sales order.
For pending invoices go to T code VL04 and you get list of all billing not yet created even though GI is done.
These are standard SAP functionality and can be used rather than looking in a table level.
Regards
Vivek

How to find open sales orders.

Hi Gurus,
Can you please help me out How to find open Sales orders in SAP.
Is there any transaction code available or we can get it through via tables.
Your afforts are highly appriciated .
SRavani.

Dear SRAVANI,
You can find open sales orders from the Transaction code "VA05N", You just run this report, Below the screen you can find open sales orders radio button , you select this and give execution parameters and execute(F8).
You will get the all open orders.
Hope it fixes your issue.
Please check it and revert.
Thanks&Regards
Raghu.k

All of a sudden when i click any button or link a new window opens with an ad

I have used Firefox for about 7 years. No issues...
I recently installed Ghostery add on.
The only way to describe it is:
I go to a page..
Click a link (or close to it) or enter or any other button/link that would take me to what I expect..
BUT instead it opens a new tab to an advertisement site (quibids, P&G, many other random ads) - a few of them I blacklisted with BLOCKSITE (installed after the problem started happening) but several I can't because I would actually use them when I need to (ex: Vistaprint.com)
When I go back to the original site and click the same link and click it again it works as intended.
This happens across all sites that I am on...
It is like there is a hidden link within the one I am clicking on.
I have pop ups blocked in my browser but this gets around it somehow.
Since GHOSTERY installed, some sites do not work correctly. If I click on a picture, or something that I want to expand it is as if I am doing nothing at all because it won't complete the action, the functionality is broken.
I have white listed a couple sites but this is random and if I whitelist everything I come across then it opens me back to what I am trying to avoid..
EXAMPLES:
went on Heat.com, clicked the button to go to the White Hot Gear instead it opened a new tab brandonline.com
was on LinkedIn and hit the comment button on a thread, then it opened a new tab vistaprint.com
was on publix.com, hit the order refills button, then it opened a new tab premium-promos.net
did a google search clicked on the link I wanted, it opened a new tab premiumgiftrewards.net
EACH time I go back to the original site and click the same button/link/etc it takes me where expected.
Thanks in advance for your help!

Both Firefox and IE have the same problem. The cursor instead of being a finger when pointing to a link is still an arrow. However I can click anywhere on the page and an ad will pop up. I have eliminated all unwanted bars in Firefox, I ran Malwarebytes until it came out clean. I also have AVG which had detected a few items on it's own. But when I get into Firefox I still have exactly the same problem. Now it will not let me download Browser Safeguard. Usually after one click the pointer returns to normal for a few screens. When I try to click to download Browser Safeguard it keeps bringing up different ads or it tries to get me to upgrade Firefox or some other browser helper program which I know are all BS tactics to get me to load their junk again. PLease help I'm an engineer and pretty good with PCs but this one has me beat at least so far.

Error while transferring SALES ORDER from ECC to SCM

Hi Experts,
I am working with SCM4.0 and ECC 5, while i transferring the sales order from ECC5 to SCM ,it encounters with the following errore message.
<b>Sales order M-10 1000: Integration model does not contain material master
Message no. XC100
Diagnosis
To ensure a consistent dataset in SAP APO, the material master data for filter object Sales order M-10 1000 also has to be known in SAP APO. In the current case no entry was found for the combination in the models that were checked.
System response
Object Sales order M-10 1000 cannot be transferred correctly.</b>
Any kind of suggestions would be appreciated well.
Thanks in advance..
Regards,
A.Fahrudeen

Hi Fahrudeen ,
I hope the master Data like Material and Location and Customer are not CIFed to APO prior to Sales order or else while ciffing the sales order you have not selected the sales order radio button and same time only enter the Material ,location and customer wothout the tick on filter objects for Mat/Loc and Cust.
Hope this helps..
Regds// Digs...

Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are

Vendor batch No. : Transaction ZJPMPU322
(Background)
There are "vendor batch" and "batch" fields in Goods-in-order and Goods-in-plan lists (transaction ZJPMPU322). Values for these fields are retrieved from inbound delivery document (transaction VL33N). After core 7.0 upgrade, "vendor batch" is not copied from "batch" in inbound delivery document any more so that nothing appears in the vendor batch field in the lists.
(Change request)
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are retrieved from "batch" in inbound delivery document ONLY IF "vendor batch" is blank in the inbound delivery document.
(Current design)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN
(If there is no record in LIPS, blank will be printed out for both fields)
(After change)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN only if LIPS-LICHN is not blank.
If LIPS-LICHN is blank, vendor batch is retrieved from LIPS-CHARG.
(If there is no record in LIPS, blank will be printed out for both fields. If both LIPS-CHARG and LIPS-LICHN are blank, blank will be printed out for both fields),
Following is the program:
REPORT zjpmrpu322 MESSAGE-ID zjpm001
              NO STANDARD PAGE HEADING
                        LINE-COUNT 50
                        LINE-SIZE 255.
*&   Development ID: PU_DD_322_LJP                                     *
*&   Report        : ZJPMRPU322                                        *
*&   The Purpose of this program is to print the Goods-in-order list *
*&   and the Goods in plan list for raw materials, materials purchase *
*&   etc at the Sasayama plant, Japan.                                 *
*&   Change Log:                                                       *
*&   Init    Who              Date        Text                         *
*&   PV      P V R S Varma    07-May-2003 Initial Version             *
*&   DU      D.Usui           2004/02/26   CR No. 1432                 *
*&   DU      D.Usui           2004/03/08   CR No. 1447                 *
*&   DU      D.Usui           2004/05/06   CR No. 1591                 *
                        Constants
CONSTANTS:
c_werks   LIKE ekpo-werks VALUE 'JP01',    "Plant code - Sasayama plant
c_id      LIKE thead-tdid VALUE 'F02',     "Text ID for Info record
c_object LIKE thead-tdobject VALUE 'EKPO',"Object of text for info rec
*c_zzjp_r1 LIKE marc-zzjp_re1 VALUE 'GMP', "Goods in plan- Domestic
*c_zzjp_r2 LIKE marc-zzjp_re1 VALUE 'GMPI', "Import sales order document
c_plus    TYPE c VALUE '',                "Holding '' sign
c_spras   LIKE makt-spras VALUE 'J',       "Language key Japan
*c_device(7)    type c value 'PRINTER',    "Device type
c_form(16)     TYPE c VALUE 'ZJPMPU305', "Form name
c_ele_gmp(4)   TYPE c VALUE 'GMP',        "GMP Text element
c_ele_gmpi(4) TYPE c VALUE 'GMPI',       "GMPI Text element
add begin CR1432
c_ele_bgmp(4) TYPE c VALUE 'BGMP',       "BGMP
c_ele_bgmpi(5) TYPE c VALUE 'BGMPI',      "BGMPI
add end CR1432
c_function(3) TYPE c VALUE 'SET',        "Function
c_type(4)      TYPE c VALUE 'BODY',       "Window area in main window
c_win_head(7) TYPE c VALUE 'HEADING',    "Heading window
c_win_shead(7) TYPE c VALUE 'SUBHEAD',    "sub heading window
c_win_fot1(7) TYPE c VALUE 'FOOTER1',    "Footer 1 window
c_win_main(4) TYPE c VALUE 'MAIN',       "Main window
c_comd(8)      TYPE c VALUE 'NEW-PAGE',   "New-page command
c_zar TYPE ekko-bsart VALUE 'ZAR',
c_x            TYPE c VALUE 'X',          "Indicator for print options
c_f            TYPE c VALUE 'F',          "Indicator for Purchase Order
add begin CR1591
Deletion indicator in purchasing document
c_loekz(1)     TYPE c VALUE 'L',
For ranges tables
c_sign_i(1)    TYPE c VALUE 'I',          "Sign(include)
c_op_eq(2)     TYPE c VALUE 'EQ',         "Option(=)
Confirmation category
c_ebtyp_ab(2) TYPE c VALUE 'AB',         "Order acknowledgment
add end CR1591
c_la(2)        TYPE c VALUE 'LA'.         "Indicator for Inbound deliver
                      Database Tables
                    Vaiables / Internal tables                       *
Internal table to store PO information
Not used after CR1591
DATA: BEGIN OF t_purc OCCURS 0,
         ebeln LIKE eket-ebeln, "Purchasing Document Number
         ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
         eindt LIKE eket-eindt, "Item delivery date
         menge LIKE eket-menge, "Scheduled quantity
         charg LIKE eket-charg, "Batch number
         matnr LIKE ekpo-matnr, "Material code
         werks LIKE ekpo-werks, "Plant
         meins LIKE ekpo-meins, "Unit of measure
         lifnr LIKE ekko-lifnr, "Vendor number
      END OF t_purc.
Internal table to store material description.
DATA: BEGIN OF t_makt OCCURS 0,
        matnr LIKE makt-matnr, "Material code
        maktx LIKE makt-maktx, "Material description
      END OF t_makt.
Internal table for storage of final EKET data
DATA: BEGIN OF t_eket OCCURS 0,
         ebeln LIKE eket-ebeln, "Purchasing Document Number
         ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
         ebelp_ex(6) TYPE n,    "Extended ebelp with length 6
         eindt LIKE eket-eindt, "Item delivery date
         menge LIKE eket-menge, "Scheduled quantity
         dabmg LIKE ekes-dabmg, " Delivered Quantity
         charg LIKE eket-charg, "Batch number
         matnr LIKE ekpo-matnr, "Material code
         werks LIKE ekpo-werks, "Plant
         maktx LIKE makt-maktx, "Material Description-- jp check
         etens LIKE ekes-etens, "Sequence Number
         meins LIKE ekpo-meins, "Unit of measure
         lifnr LIKE ekko-lifnr, "Vendor number
         vbeln LIKE ekes-vbeln,
         vbelp LIKE ekes-vbelp,
         vpnam(40) TYPE c,      "Vendor product name
      END OF t_eket.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes OCCURS 0,
         ebeln LIKE ekes-ebeln, "Purchasing Document Number
         ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
         etens LIKE ekes-etens, "Sequence No
         eindt LIKE ekes-eindt, "Item delivery date
         menge LIKE ekes-menge, "Scheduled Quantity
         dabmg LIKE ekes-dabmg, " delivered quantity
         vbeln LIKE ekes-vbeln,
         vbelp LIKE ekes-vbelp,
         mark TYPE c,
      END OF t_ekes.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes_temp OCCURS 0,
         ebeln LIKE ekes-ebeln, "Purchasing Document Number
         ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
         etens LIKE ekes-etens, "Sequence No
         eindt LIKE ekes-eindt, "Item delivery date
         menge LIKE ekes-menge, "Scheduled Quantity
      END OF t_ekes_temp.
Internal table for storing data from MLGN table.
DATA: BEGIN OF t_mlgn OCCURS 0,
         matnr LIKE mlgn-matnr, "material code
         lhmg1 LIKE mlgn-lhmg1, "Standard pallet size
         lhme1 LIKE mlgn-lhme1, "Unit of measure
         lety1 LIKE mlgn-lety1, "tower
         ltkze LIKE mlgn-ltkze, "Storage location
      END OF t_mlgn.
Internal table for storing data from MARM table.
DATA: BEGIN OF t_marm OCCURS 0,
         matnr LIKE marm-matnr, "material code
         umrez LIKE marc-zzjp_cas_size, "Std package unit
         meins LIKE ekpo-meins, "alternate unit
      END OF t_marm.
Internal table for storing data from MARC table.
DATA: BEGIN OF t_marc OCCURS 0,
         matnr LIKE marc-matnr,               "Material code
         zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
         zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
         zzjp_aprn     LIKE marc-zzjp_aprn,   "Apperance
         zzjp_re1     LIKE marc-zzjp_re1,     "Heading
      END OF t_marc.
Internal table for storing data from lfa1 table.
DATA: BEGIN OF t_lfa1 OCCURS 0,
         lifnr LIKE lfa1-lifnr, "Vendor code
         name1 LIKE lfa1-name1, "Vendor name
      END OF t_lfa1.
Internal table for Storing data from LIPS table.
DATA: BEGIN OF t_lips OCCURS 0,
         vbeln LIKE lips-vbeln, "Delivery document no
         posnr LIKE lips-posnr, "Item number for Delivery document
         charg LIKE lips-charg, "Batch number
         lichn LIKE lips-lichn, "Vendor Batch number
      END OF t_lips.
Internal table for storing the final display data.
DATA: BEGIN OF t_display OCCURS 0,
        g_checkbox type c,      "check box for selection of records
         ebeln LIKE ekes-ebeln,      "Purchasing Document Number
         ebelp LIKE ekes-ebelp,      "Item Number of Purchasing Document
         etens LIKE ekes-etens,      "Sequence No
         eindt LIKE eket-eindt,      "Item delivery date
         menge LIKE eket-menge,      "Scheduled Quantity
         vpnam(40) TYPE c,          "Vendor product name
         lifnr LIKE ekko-lifnr,      "Vendor code
         name1 LIKE lfa1-name1,      "Vendor name
         meins LIKE ekpo-meins,      "Unit of measure
         matnr LIKE ekpo-matnr,      "Material Number
         maktx LIKE makt-maktx,     "Material Description-- jp check
         charg LIKE lips-charg,      "Batch number
         lichn LIKE lips-lichn,      "Vendor Batch number
         lhmg1 LIKE mlgn-lhmg1,     "standard pallet size
         lhme1 LIKE mlgn-lhme1,      "Unit of standard pallet
         lety1 LIKE mlgn-lety1,     "tower
         ltkze LIKE mlgn-ltkze,      "Storage location
         umrez LIKE marc-zzjp_cas_size,      "Std package unit
         meinh LIKE ekpo-meins,      "alternate unit
         zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,      "Product Std number
         zzjp_dos_frm LIKE marc-zzjp_dos_frm,      "Dosage form
         zzjp_aprn     LIKE marc-zzjp_aprn,          "Apperance
         zzjp_re1     LIKE marc-zzjp_re1,           "Heading
         std_pac_no(13) TYPE n,            "Std receipt package no
         tot_std_pt(13) TYPE n,             "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
         vbeln like ekes-vbeln,     "Goods-in-order
         vbelp like ekes-vbelp,     "Item
add end CR1447
      END OF t_display.
Internal table for storing the final display data -Goods in order list
DATA: BEGIN OF t_display1 OCCURS 0,
         ebeln LIKE ekes-ebeln,      "Purchasing Document Number
         ebelp LIKE ekes-ebelp,      "Item Number of Purchasing Document
         etens LIKE ekes-etens,      "Sequence No
         eindt LIKE eket-eindt,      "Item delivery date
         menge LIKE eket-menge,      "Scheduled Quantity
         vpnam(40) TYPE c,          "Vendor product name
         lifnr LIKE ekko-lifnr,      "Vendor code
         name1 LIKE lfa1-name1,      "Vendor name
         meins LIKE ekpo-meins,      "Unit of measure
         matnr LIKE ekpo-matnr,      "Material Number
         maktx LIKE makt-maktx,     "Material Description-- jp check
         charg LIKE lips-charg,      "Batch number
         lichn LIKE lips-lichn,      "Vendor Batch number
         lhmg1 LIKE mlgn-lhmg1,     "standard pallet size
         lhme1 LIKE mlgn-lhme1,      "Unit of standard pallet
         lety1 LIKE mlgn-lety1,     "tower
         ltkze LIKE mlgn-ltkze,      "Storage location
         umrez LIKE marc-zzjp_cas_size,      "Std package unit
         meinh LIKE ekpo-meins,      "alternate unit
         zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,      "Product Std number
         zzjp_dos_frm LIKE marc-zzjp_dos_frm,      "Dosage form
         zzjp_aprn     LIKE marc-zzjp_aprn,          "Apperance
         zzjp_re1     LIKE marc-zzjp_re1,           "Heading
         std_pac_no(13) TYPE n,            "Std receipt package no
         tot_std_pt(13) TYPE n,             "Total no of std pallets
      END OF t_display1.
Internal table for storing the final display data - Goods in plan list
DATA: BEGIN OF t_display2 OCCURS 0,
         ebeln LIKE ekes-ebeln,      "Purchasing Document Number
         ebelp LIKE ekes-ebelp,      "Item Number of Purchasing Document
         etens LIKE ekes-etens,      "Sequence No
         eindt LIKE eket-eindt,      "Item delivery date
         menge LIKE eket-menge,      "Scheduled Quantity
         name1 LIKE lfa1-name1,      "Vendor name
         meins LIKE ekpo-meins,      "Unit of measure
         matnr LIKE ekpo-matnr,      "Material Number
         maktx LIKE makt-maktx,     "Material Description-- jp check
         charg LIKE lips-charg,      "Batch number
         lichn LIKE lips-lichn,      "Vendor Batch number
         lhmg1 LIKE mlgn-lhmg1,     "standard pallet size
         lety1 LIKE mlgn-lety1,     "tower
         ltkze LIKE mlgn-ltkze,      "Storage location
         tot_std_pt(13) TYPE n,             "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
         vbeln like ekes-vbeln,     "Goods-in-order
         vbelp like ekes-vbelp,     "Item
add end CR1447
      END OF t_display2.
add begin CR1591
RANGES: r_matnr FOR mara-matnr,   "for p_matnr
        r_ebeln FOR ekpo-ebeln.   "for p_ebeln
add end CR1591
DATA: line TYPE i.            " line number
DATA: g_checkbox TYPE c.      "check box for selection of records
DATA: g_tab LIKE sy-index.    "variable to hold index
DATA g_tabix LIKE sy-tabix. "holder for table index
Printing Options.
DATA: lw_pr_options LIKE itcpo.
*lw_pr_options-tddest = 'SA03'.      " Print Device Name
lw_pr_options-tdpreview = 'X'.      " Print Preview
lw_pr_options-tdnewid = 'X'.        " New Request
lw_pr_options-tdlifetime = 2.       " Retention in Spool
                        Selection Screen                             *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
SELECT-OPTIONS:
s_date FOR sy-datum DEFAULT sy-datum. " Search period.
PARAMETERS:
p_matnr LIKE mara-matnr,               " Material code
p_ebeln LIKE ekpo-ebeln.               " Purchase Document No
SELECTION-SCREEN END OF BLOCK blk1.
                   Selection Screen Checks                           *
AT SELECTION-SCREEN.
IF ( s_date-low IS INITIAL ) AND
     ( p_matnr IS INITIAL ) AND
     ( p_ebeln IS INITIAL ).
    MESSAGE e000 WITH 'Entry Must in atleast one of the Fields'(t00).
ENDIF.
IF ( NOT p_matnr IS INITIAL ) AND
     ( s_date IS INITIAL )      AND
     ( p_ebeln IS INITIAL ).
    MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del begin CR1591
This check is not found in original FS
IF ( NOT p_matnr IS INITIAL ) AND
    ( s_date IS INITIAL ) AND
    ( NOT p_ebeln IS INITIAL ).
   MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del end CR1591
               Validations for Data selection                        *
del begin CR1591
Waste check
IF ( NOT s_date IS INITIAL ) AND
    ( p_matnr IS INITIAL ) AND
    ( p_ebeln IS INITIAL ).
   PERFORM f_check_date_in_eket.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
    ( NOT p_matnr IS INITIAL ) AND
    ( p_ebeln IS INITIAL ).
   PERFORM f_check_matnr_in_plant.
   PERFORM f_check_matnr_in_ekpo.
   PERFORM f_check_date_in_eket.
   PERFORM f_check_matnr_in_plant.
   PERFORM f_check_matnr_in_ekpo.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
    ( NOT p_matnr IS INITIAL ) AND
    ( NOT p_ebeln IS INITIAL ).
   PERFORM f_check_matnr_in_plant.
   PERFORM f_check_matnr_in_ekpo.
   PERFORM f_check_date_in_eket.
   PERFORM f_check_ebeln_in_ekpo.
   PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
    ( NOT s_date IS INITIAL ) AND
    ( p_matnr IS INITIAL ).
   PERFORM f_check_date_in_eket.
   PERFORM f_check_ebeln_in_ekpo.
   PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
    ( s_date IS INITIAL ) AND
    ( p_matnr IS INITIAL ).
   PERFORM f_check_ebeln_in_ekpo.
   PERFORM f_check_werks_in_ekpo.
ENDIF.
del end CR1591
                     Data selection from Tables                      *
START-OF-SELECTION.
SET PF-STATUS 'SELECT'.
add begin CR1591
Set ranges tables
PERFORM set_ranges.
add end CR1591
mod begin CR1591
**Selection of PO data from EKET into internal table t_purc.
PERFORM f_select_eket.
**Selection of corresponding PO data for EKET from EKES into t_ekes.
PERFORM f_select_ekes.
**Selection of material desc from MAKT table into T_makt.
PERFORM f_select_makt.
**Copy the contents of t_purc and t_makt into t_eket table.
PERFORM f_move_eket.
**Replace the corresponding entries of t_eket with t_ekes.
PERFORM f_update_eket.
Selection of PO data from EKET into internal table T_EKET.
PERFORM f_select_eket2.
Selection of corresponding PO data from EKES appending to T_EKET.
PERFORM f_select_ekes2.
Selection of material desc from MAKT table into T_MAKT.
PERFORM f_select_makt2.
mod end CR1591
*Selection of vendor product name.
PERFORM f_select_vpnam.
del begin CR1591
No need
**copy t_eket-ebelp into temporary variable.
PERFORM f_copy_ebelp.
del end CR1591
*selection of data from MLGN table into t_mlgn internal table
PERFORM f_select_mlgn.
*selection of data from marm table into t_marm internal table
PERFORM f_select_marm.
*selection of data from marc table into t_marc internal table
PERFORM f_select_marc.
*selection of data from lfa1 table into t_lfa1 internal table
PERFORM f_select_lfa1.
*Selection of data from LIPS table into t_lips internal table
PERFORM f_select_lips.
del begin CR1591
Don't display list screen when no data exists
*END-OF-SELECTION.
del end CR1591
*lines = sy-linno - 1.
*Collection of data into the final display internal table t_Display
PERFORM f_collect_final.
*Display the contents of t_display as a simple List
PERFORM f_list_display.
AT USER-COMMAND.
PERFORM f_select_layout.
INCLUDE zjpmipu315.
INCLUDE zjpmipu316.
*&      Form f_check_MATNR_in_plant
     This Routine is to check if the the selected material code is
     available in the plant 'JP01'.
FORM f_check_matnr_in_plant.
DATA: l_matnr LIKE mara-matnr.
SELECT matnr UP TO 1 ROWS FROM marc
                   INTO l_matnr
                   WHERE
                   matnr = p_matnr AND
                   werks = c_werks.
ENDSELECT.
IF l_matnr IS INITIAL.
    MESSAGE e000 WITH
    'The material is not available in '(t02) c_werks 'plant'(t20).
ENDIF.
ENDFORM.                    " f_check_MATNR_in_plant
*&      Form f_check_EBELN_in_EKPO
      This Routine is to check if the Purchase order number selected
      is existing or not and if it exists, check if it is related to
      the plant 'JP01'.
FORM f_check_ebeln_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
                INTO l_ebeln
                WHERE
                ebeln = p_ebeln AND
                werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
    MESSAGE e000 WITH
    'PO not available or not related to '(t03) c_werks 'plant'(t21).
ENDIF.
ENDFORM.                    " f_check_EBELN_in_EKPO
*&      Form f_check_matnr_in_ekko
      This routine is to check if any PO exist for the selected
      Material code.
FORM f_check_matnr_in_ekpo.
DATA: l_matnr LIKE ekpo-matnr.
SELECT matnr UP TO 1 ROWS FROM ekpo
                   INTO l_matnr
                   WHERE
                   matnr = p_matnr.
ENDSELECT.
IF l_matnr IS INITIAL.
    MESSAGE e000 WITH
    'PO does not exist for the material no'(t04) p_matnr.
ENDIF.
ENDFORM.                    " f_check_matnr_in_ekpo
*&      Form f_check_date_in_eket
      This routine is to check if any purchase order exists
      with the selected
FORM f_check_date_in_eket.
DATA: l_eindt LIKE eket-eindt.
SELECT eindt UP TO 1 ROWS FROM eket
                   INTO l_eindt
                   WHERE
                   eindt IN s_date.
ENDSELECT.
IF l_eindt IS INITIAL.
    MESSAGE e000 WITH
   'No PO exist with the selected delivery date '(t05).
ENDIF.
ENDFORM.                    " f_check_date_in_eket
*&      Form f_check_werks_in_ekpo
      This Routine is to check if the selected purchase order
      is associated with the plant JP01
FORM f_check_werks_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
                   INTO l_ebeln
                   WHERE
                   werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
    MESSAGE e000 WITH
    'The selected P0 is not relevant to '(t06) c_werks 'plant'(t22).
ENDIF.
ENDFORM.                    " f_check_werks_in_ekpo
*&      Form f_select_eket
      Routine to collect data from EKET, EKPO, MAKT, EKKO tables
      using inner join and store the data into internal table
      t_PURC. The data selection is based on the selection screen's
      input.
FORM f_select_eket.
IF ( NOT s_date-low IS INITIAL ) AND
     ( p_matnr IS INITIAL ) AND
     ( p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            eket~eindt IN s_date AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
     ( NOT p_matnr IS INITIAL ) AND
     ( p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            eket~eindt IN s_date AND
            ekpo~matnr = p_matnr AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
     ( NOT p_matnr IS INITIAL ) AND
     ( NOT p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            eket~eindt IN s_date AND
            ekpo~matnr = p_matnr AND
            ekpo~ebeln = p_ebeln AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ELSEIF ( s_date-low IS INITIAL ) AND
     ( p_matnr IS INITIAL ) AND
     ( NOT p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            ekpo~ebeln = p_ebeln AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
     ( p_matnr IS INITIAL ) AND
     ( NOT p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            eket~eindt IN s_date AND
            ekpo~ebeln = p_ebeln AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ENDIF.
IF sy-subrc <> 0.
   MESSAGE s000 WITH 'Data not found'(t07).
   LEAVE LIST-PROCESSING.
ELSE.
SORT t_purc.
ENDIF.
ENDFORM.                    " f_select_eket
*&      Form f_select_makt
      Routine to select the material description for all the
      materials present in T_purc table
FORM f_select_makt.
DATA: l_t_makt(4) TYPE c VALUE 'MAKT'.
SELECT
      matnr
      maktx
FROM
      makt
INTO TABLE t_makt
      FOR ALL ENTRIES IN t_purc
WHERE
     matnr = t_purc-matnr AND
     spras = c_spras.
IF sy-subrc <> 0.
    MESSAGE s000 WITH
      'Relevant data not found in'(t09) l_t_makt 'table'(t23).
ELSE.
    SORT t_makt.
ENDIF.
ENDFORM.                    " f_select_makt
*&      Form f_move_eket
      Routine to join data in T_PURC and T_MAKT tables into
      internal table T_MAKT.
FORM f_move_eket.
LOOP AT t_purc.
    t_eket-ebeln = t_purc-ebeln.
    t_eket-ebelp = t_purc-ebelp.
    t_eket-eindt = t_purc-eindt.
    t_eket-menge = t_purc-menge.
    t_eket-charg = t_purc-charg.
    t_eket-matnr = t_purc-matnr.
    t_eket-werks = t_purc-werks.
    t_eket-meins = t_purc-meins.
    t_eket-lifnr = t_purc-lifnr.
    READ TABLE t_makt WITH KEY matnr = t_purc-matnr
                                     BINARY SEARCH.
    IF sy-subrc = 0.
      t_eket-maktx = t_makt-maktx.
    ENDIF.
    APPEND t_eket.
    CLEAR t_eket.
ENDLOOP.
ENDFORM.                    " f_move_eket
*&      Form f_select_ekes
      Routine to select EKES data for all corresponding entries
      of T_EKET.
FORM f_select_ekes.
DATA: l_tabix TYPE i.
IF NOT s_date IS INITIAL.
   SELECT
           ebeln
           ebelp
           etens
           eindt
           menge
    INTO   TABLE t_ekes
     FROM
           ekes
    WHERE
           eindt IN s_date.
ELSE.
DESCRIBE TABLE t_purc LINES l_tabix.
IF l_tabix GT 0.
    SELECT
            ebeln
            ebelp
            etens
            eindt
            menge
            dabmg
            vbeln
            vbelp
     FROM
            ekes
     INTO   TABLE t_ekes
           FOR ALL ENTRIES IN t_eket
            FOR ALL ENTRIES IN t_purc
     WHERE
            ebeln = t_purc-ebeln AND
            ebelp = t_purc-ebelp AND
            eindt IN s_date.
          AND ebeln eq p_ebeln.
       and matnr in p_matnr.
ENDIF.
CLEAR l_tabix.
IF NOT s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
    SELECT
            ekes~ebeln
            ekes~ebelp
            ekes~etens
            ekes~eindt
            ekes~menge
            ekes~dabmg
   APPENDING TABLE t_ekes
      FROM ekes
     WHERE
            eindt IN s_date AND
            ebeln EQ p_ebeln AND
            ebtyp EQ c_la.
ELSEIF NOT s_date IS INITIAL AND p_ebeln IS INITIAL.
    SELECT
                ekes~ebeln
                ekes~ebelp
                ekes~etens
                ekes~eindt
                ekes~menge
                ekes~dabmg
       APPENDING TABLE t_ekes
          FROM ekes
         WHERE
                eindt IN s_date AND
           ebeln EQ p_ebeln AND
                ebtyp EQ c_la.
ELSEIF s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
    SELECT
                ekes~ebeln
                ekes~ebelp
                ekes~etens
                ekes~eindt
                ekes~menge
                ekes~dabmg
       APPENDING TABLE t_ekes
          FROM ekes
         WHERE
           eindt IN s_date AND
                ebeln EQ p_ebeln AND
                ebtyp EQ c_la.
ENDIF.
IF sy-subrc = 0.
    SORT t_ekes.
ENDIF.
IF NOT t_ekes[] IS INITIAL.
    t_ekes_temp[] = t_ekes[].
    SORT t_ekes_temp BY ebeln ebelp.
    DELETE ADJACENT DUPLICATES FROM t_ekes_temp COMPARING ebeln ebelp.
    LOOP AT t_ekes_temp.
      READ TABLE t_purc WITH KEY ebeln = t_ekes_temp-ebeln
                                 ebelp = t_ekes_temp-ebelp.
      IF sy-subrc NE 0.
        CLEAR t_purc.
        SELECT SINGLE
              eket~ebeln
              eket~ebelp
              eket~eindt
              eket~menge
              eket~charg
              ekpo~matnr
              ekpo~werks
              ekpo~meins
              ekko~lifnr
       INTO CORRESPONDING FIELDS OF t_purc
      FROM
               ( ( eket INNER JOIN ekko ON
                eketebeln = ekkoebeln )   INNER JOIN ekpo ON
                eketebelp = ekpoebelp AND
                ekpoebeln = ekkoebeln )
    WHERE
             eket~ebeln = t_ekes_temp-ebeln
      AND    eket~ebelp = t_ekes_temp-ebelp
      AND    ekpo~elikz NE c_x
      AND    ekko~bstyp EQ c_f
      AND    ekko~bsart NE c_zar.
        IF sy-subrc EQ 0.
          APPEND t_purc.
          CLEAR t_purc.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
REFRESH: t_ekes_temp, t_ekes.
CLEAR: t_ekes_temp, t_ekes.
Once the header is filled up get the details from EKES
SELECT ebeln ebelp etens eindt menge dabmg vbeln vbelp
                     INTO TABLE t_ekes
                     FROM ekes
                     FOR ALL ENTRIES IN t_purc
               WHERE ebeln EQ t_purc-ebeln.
Mark the entries as 'X' which falls in the date range
LOOP AT t_ekes.
    IF t_ekes-eindt IN s_date.
      t_ekes-mark = 'X'.
      MODIFY t_ekes INDEX sy-tabix TRANSPORTING mark.
    ENDIF.
ENDLOOP.
SORT t_ekes BY ebeln ebelp ASCENDING mark DESCENDING.
Delete the entries from eket if no entries in EKES falls in the period
LOOP AT t_purc.
    l_tabix = sy-tabix.
    READ TABLE t_ekes WITH KEY ebeln = t_purc-ebeln
                               ebelp = t_purc-ebelp.
    IF sy-subrc EQ 0.
      IF t_ekes-mark NE 'X'.
        DELETE t_purc INDEX l_tabix.
      ENDIF.
    ENDIF.
ENDLOOP.
delete the entries from EKES which do not fall in the specified period
DELETE t_ekes WHERE mark NE 'X'.
ENDFORM.                    " f_select_ekes
*&      Form f_update_eket
      Routine to substitute relevant t_eket entries with that of
      t_ekes entries.It does not modify the remaining entries for
      for which the corresponding values in t_ekes doesnot exist.
FORM f_update_eket.
DATA: BEGIN OF lt_temp_eket OCCURS 0,
           ebeln LIKE eket-ebeln, "Purchasing Document Number
           ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
           eindt LIKE eket-eindt, "Item delivery date
           menge LIKE eket-menge, "Scheduled quantity
           dabmg LIKE ekes-dabmg, " Delivered quantity
           matnr LIKE ekpo-matnr, "Material code
           maktx LIKE makt-maktx, "Material Description-- jp check
           etens LIKE ekes-etens, "Sequence Number
           meins LIKE ekpo-meins, "Unit of measure
           lifnr LIKE ekko-lifnr, "Vendor number
           charg LIKE eket-charg, " Batch number   Added by PD 08/08/03
           vbeln LIKE ekes-vbeln,
           vbelp LIKE ekes-vbelp,
        END OF lt_temp_eket,
        l_menge LIKE ekes-menge.
LOOP AT t_eket.
    LOOP AT t_ekes WHERE ebeln = t_eket-ebeln
                    AND ebelp = t_eket-ebelp.
Added by PD 08/08/03
      MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
      MOVE t_eket-ebeln TO lt_temp_eket-ebeln.
      MOVE t_eket-ebelp TO lt_temp_eket-ebelp.
      MOVE t_eket-meins TO lt_temp_eket-meins.
      CLEAR l_menge.
      l_menge = t_ekes-menge - t_ekes-dabmg.
      IF l_menge LE 0.
        CONTINUE.
      ELSE.
        MOVE l_menge TO lt_temp_eket-menge.
      ENDIF.
      MOVE t_ekes-eindt TO lt_temp_eket-eindt.
      MOVE t_ekes-etens TO lt_temp_eket-etens.
      MOVE t_eket-lifnr TO lt_temp_eket-lifnr.
      MOVE t_eket-maktx TO lt_temp_eket-maktx.
      MOVE t_eket-matnr TO lt_temp_eket-matnr.
      MOVE t_ekes-vbeln TO lt_temp_eket-vbeln.
      MOVE t_ekes-vbelp TO lt_temp_eket-vbelp.
      APPEND lt_temp_eket.
      CLEAR lt_temp_eket.
      CLEAR t_ekes.
    ENDLOOP.
    IF sy-subrc NE 0.
Added by PD 08/08/03
      MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
      MOVE t_eket-ebeln

Dear
Problem No 1 : we are working in a process industries with three plants each of them have three order type. we have define MRP group in "OPPR" then assign each MRP group to Orde types in "OPPE". Now the problem is whn i convert plan order in process order for any material systme automaticaly pick the order type PIi01.
Answer :
1.Please check the OPPR -Plant and MRP group -Select Order Type Button -Check what Order Type you have assinged here ( PI01( May be the default Process Order Type )
2.If you are maintaing MRP group ( 0001 or 0002) , did you asisng the same in MRP1 view ?? because
3.Did you maintain the similar Order type in OPKP -Define Production Scheduling Profile ? -This has highest priority .
4.Did you maintain correct order type in OPJH-Maintain Order Type ??
Refer the expert comments on the same issue : Strategy group to define production order type
Problem No 2: 2nd Problem is system system is not creating plan order for prrevios dates. say i enter PIR for month of november from first november to 30th november and run MRP on 29th the sytem create plan order on 30th of november with exception message 30.
Answer : You can plan the order in back dated , if you maitain Satrt date in the Past optiuon in OPU3/OPU5-Define Scheduling parameters .Goto OPU3 -Select the Order Type -Double click -Maintain 90-60 days in the Start Date in the past in Scheduling Control and Details scheduling tab .
Hope it helps
regards
JH

Order of buttons

Similar Messages

Maybe you are looking for