Order of display of free Characteristics on the Bex Browser

Dear experts,
I have a question about the order of the "free characteristics".
I found the order of the "free characteristics" and that displayed on my web report is not the same.
It seems that the order the free char display is "alphabetic".
Does anyone know where is the configuration of the display order on my webtemplate?
thanks.

Hi David,
If you have created the query in Query designer 3.5x, then there is little you can do, since by default the free characteristics will always be displayed in alphabetical order by default on the portal. This is true even if you have sorted the free characteristics in some other order in the query designer.
However if you have designed the query in Query designer 7.0x (release 2004s) then you can keep the order according to the order you have maintained in the query designer. This can be done as follows:
Go to WAD 7.0 (release 2004s), open the web template created on your query. Then after you open, on the left you can see web items.Under that select 'Navigation Pane' and drag it to layout. Once you bring it in layout, then on the left side under Web item properties look for 'Internal display'.
In 'Internal display' look for in the field navifation pane content select free charcteristics. Then just uncheck the check box named 'Alphabetical Sorting of'.  By default it will be On, you just make it Off.
Hope this helps.
Thanks,
rahul

Similar Messages

  • Cant see the free characteristics in the work book?

    Hi all,
    I have added the free characteristics in the workbook, but cant see those free characteristics in the workbook!!
    How to see the free characteristics in the workbook!!
    Thanks

    hi pooja,
    just open your query in Bex Analyzer,
    there u will find three buttons above the data table display.
    then when u will click on Filter tab, u will get all the free characteristics and variables used in your query.
    then u can go to workbook, switch to design mode and make them visible,
    may be at the time of creation of workbook, it(filter) would have been removed and saved as workbook.
    hope this will help u
    thanks

  • Hiding characteristics in the BEx reporting

    My query is Hiding characteristics in the BEx reporting.
    I want to see only query title, variable and result.
    I want Hide or delete characteristics ( which are free characteristics and rows in Design mode of query) at query level.
    can I do this ?

    Ok. I was thinking you were in 7.0.
    anyway, in your query remove all the characteristics in your rows and the query will show only the result then. (no drill-down)
    For technical name and variable info. in analyzer, go to Layout and choose Display text elements.

  • How do I get the Adobe toolbar to display above a pdf in the web browser?

    Hi guys,
    I'm just having trouble with locating the grey toolbar, it's not displaying when I open a .pdf in a web browser.
    I can open the .pdf fine, (within Safari), and usually (on my old computer) there was a grey toolbar above the .pdf & there's a print icon on it - that's what I'm looking for, so that I can print my lecture notes straight away.
    The toolbar won't display on the web browser above the .pdf, but if I save the .pdf & open it with Adobe Reader, then the toolbar displays there with all of the icons etc.
    So I was wanting to know if instead of saving them every time, if there's an option to get the toolbar displaying above .pdfs in Safari?
    Has anyone else encountered this problem?
    Any help would be greatly appreciated.

    Unfortunately, iOS does not provide a way to install "plugins" to Safari so there is no possible way the Reader can do this. You can use the "open in" functionality to launch Reader from Safari.

  • How can I display Group By-Value in the Bex Report

    I have a report values looks like below,
    Month         BALANCE
    04/2005         $ 188.00
    11/2005         $ 188.00
    11/2005         $ 180.00
    12/2005         $ 194.00
    12/2005         $ 196.00
    01/2006         $ 182.00
    01/2006         $ 376.00
    02/2006         $ 184.00
    02/2006         $ 192.00
    I am expecting the results
    Month         BALANCE
    04/2005         $ 188.00
    11/2005         $ 368.00
    12/2005         $ 390.00
    01/2006         $ 558.00
    02/2006         $ 376.00
    Group by Month .(not a result value)
    Please advise on this.
    Advance Thanks

    Rows  - Calendar Year/Month
    Keyfigure Structure in the Column
    The below fields are in the column
    BALANCE
    No.Of .Days
    0-30 days
    31-60 days
    Still I am getting the value
    04/2005           $ 94.00
    11/2005          $ 94.00
              $ 90.00
    12/2005          $ 97.00
              $ 98.00
    01/2006          $ 91.00
              $ 188.00
    02/2006          $ 92.00
              $ 96.00
    Balance needs to Sum /group according to the date value.
    01/2006 has value 91 and 188.I am expecting 279 .
    Please provide some tips.Thanks for help.

  • Not Show a Characteristics in the Bex

    I have a charcateristisc in the Cube that I do not want to be visible in the Query Designer. Is there a way to acheive this by changing some of the database tables?
    Any help is appreciated.
    Thanks
    Amit.

    Hi Amit,
        If you are not maintainging data for this characteristic then deactivate it.
        I don't think it is possibe to hide a characteristic in query designer, when it is having some data in cube.
    Regards,
    Ramesh

  • Order of free characteristics in standard webtemplate

    Hi Gurus,
    i created a query with query designer. In Excel anything is fine. Also the order of the free characteristics in the navigation panel on the left side is as defined in query. But if i start the query in web i got a problem. In web the order of the free characteristics in the navigation pane is alphabetically and not as defined in the query designer. Any ideas?
    Regards,
    Adem

    Hey,
    I guess it's problematic. Since you wanna still have the standard web template general, you cant fix the sequence you like by changing it.
    I don't think it's possible.
    The only way is to create a new web template in which u have the correct sequence and than running the web template instead of the query.
    Tomer.

  • How to select more than one free characteristics in web report?

    Hi,
    From the performance point of view, I want to select more than one free characteristics to be displayed in WEB report.
    I know in BEx Analyzer, we can do this by right mouse click and choose' query property' from the context menu, all the free characteristics are displayed in the popup window. But in WEB report these free char don't displayed in the 'query property' popup window.
    Could anyone tell me how to implement this in WEB report?
    Eileen

    Hi,
    each free characteristics in the list has two functions beside it, 'drilldown in rows' and 'drilldown in columns', but this functions as select only one free characteristics, each time you select one, the report will be loaded again.
    if I want to select like 10 free characteristics, the report will be refreshed and reloaded 10 times.
    my question is that how can I select these 10 free characteristics once to improve the performance.
    your help will be appreciated. Thanks.
    Eileen

  • All Chars in Rows displayed in Free Charecteristics area

    Hi,
    I don't have any chars in the free characteristics area of BEx Query Designer. But when I execute the query all the characteristics in the rows are being displayed above the Result area just below the Name of the Query.
    How do I remove them from here? I think it is some settings issue.
    Thanks in advance.
    Bhargava

    Our users do not want to see the rows containing the characteristics (filter cells) below the query title and above the resulting query.   
    They do not want to repeatedly delete this gray area above the query results every time they download to EXCEL.  We are not using workbooks.
    We do want to be able to see the characteristics in the Navigation block when the users run the query from a web template.   In both the BEX designer or web template properties, we do not see a way to hide the filter characteristics after they download into EXCEL.
    Did you ever find the solution or configuration setting, etc to permanently hide them?

  • Ordering Caller Display

    Dont know if anyone can help - am in work until last and cant ring from here.  I have been trying to order caller display for my account but the website just leads me round in circles and never actually orders anything after numerous times entering my phone number and post code I've gone potty.
    Had an online chat with an advisor and after explaining what had been happening she gave me to the exact same page and I went round in circles again.
    Any mods on here that can sort it for me?
    Thanks in advance
    K

    Caller display is free with the BT Privacy at home service at http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=25504&s_cid=con_FURL_...
    You could try to order from that page.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Sequence of free characteristic in the Navigation pane

    Hi Experts,
    How can we specify a sequence to the free characteristics in the navigation pane in WAD (BI 7)
    for eg: i have to specify: in the wad like this
    1. Zone manager
    2. Area manager
    3. Region manager
    4. District manager
    As of now i only see one option, which alphabetically sorts it out, but i dont want that. I need to specify as per the above sequence.
    Points would be rewarded suitably.
    Regards,

    Hi,
    Its the standard way the SAP behaves. Maybe you have to live with it.
    The only way around i can suggest is to have the following desc either starting with numbers or with alphabets:
    1. Zone manager
    2. Area manager
    3. Region manager
    4. District manager
    OR
    a. Zone manager
    b. Area manager
    c. Region manager
    d. District manager
    Regds,
    Shashank

  • Free Chars int the Planning Layout

    Hello IP gurus,
    Is it advisable to put too many free characteristics in the planning layout and in the real time cube . My user is requesting too many chars in the layout and I am suggesting to have it in the report/reporting cube and not in the layout/real time cube. All are actual and nothing to do with planning chars/key figures. Can you please advice what is the best design. Thanks in advance for your help guys.
    Senthil

    Hi,
    You can use free characteristic ,if you are going to plan at that granularity.For input ready query used in planning ,characteristics
    part of aggregation level has to be part of row or column.So check at what granularity you are going to plan for data,then decide design.
    Regards,
    Indu

  • A problem displaying PDF file in the Web Browser layout.

    I'm hoping someone can help me with this issue.  I need to display my PDF documents in the web-browser layout as part of my daily job.  I use JAWS 14, and many times, when my document is launched, it comes up blank, or at least that's what JAWS reports.  If I press the F5 key to refresh the page, then it displays properly.  I need the document to show up properly when it is initially loaded.  How can I accomplish this?    

    I'm hoping someone can help me with this issue.  I need to display my PDF documents in the web-browser layout as part of my daily job.  I use JAWS 14, and many times, when my document is launched, it comes up blank, or at least that's what JAWS reports.  If I press the F5 key to refresh the page, then it displays properly.  I need the document to show up properly when it is initially loaded.  How can I accomplish this?    

  • Display multiple roles like in BEX browser onto the Portal

    Hi All,
    What is the best way to display BW roles onto the Portal.
    Thanks,
    Tom

    Hi Patricio,
    In the backend BW system, there are BW roles assigned for each user. When I go to the BEX browser, I see these BW roles that contains queries and workbooks. Now how do I display these BW roles onto the portal.
    Thanks,
    Tom

  • Problem with the Drill down in the BeX Query Report

    Hi Experts,
    I have a problem when drilling down the characteristics in the BeX Report. There are nearly 125 fields (characteristics) all in Free Characterictics. After executing the Query, in the report when i am selecting one characteristic for drill down i am getting the values of another characteristic. This is not happening to all 125 fields.
    Please let me know where is the problem and give me some suggestion what we can do with this.......

    Here is my VI, it's just a trial so it can look messy...
    Thanks,
    Isabel
    Message Edited by Isa_pm on 01-22-2007 01:12 PM
    Attachments:
    Create report.vi ‏96 KB

Maybe you are looking for

  • Photoshop fails to run or re-install after power outage

    I experienced a power outage while performing an update to Photoshop via Creative Cloud on my iMac.  Since then I have been unable to use or re-install the app.  Initially when trying to re-install, Adobe Application Manager would run through most of

  • Signing in mail with a verisign certificate

    I have 2 certificates bought from Verisign that I used previously under 10.6. I made a clean install of 10.6 and then updated to 10.7, but even if I managed to import the certificates in the keychain access, the buttons in mail proposing the signatur

  • HT204406 Problem with iTunes match cutting off a song on my iPhone, not Mac or PC

    I have purchased the Katy Perry album "Prism" outside of iTunes and matched it with iTunes match. When I try to play the first song "Roar" on my iPhone, it plays only part of it and then cuts off and plays the second song.  This only happens on my iP

  • Info-package setting: Data selection tab

    Hi, I have to give selection conditions in info-package. The need is to restrict the values of a particular field to start with BP and BQ. i.e i need only values starting with BP and BQ. I gave from and to values in the selection screen of info-packa

  • Are you running 4 GB?!

    With the recent AMD price dump I am planning to give my old Diamond some more umph with a x2 4600+ and some more memory. After reading several posts in here I am a hesitant to go for 4 GB. I have XP-64 so I should be able to see all the memory. But a