Order of Queues(Capture/Apply/Propagation) to start and stop the queues

Hi All,
We have bi-directional replication using streams.We want to stop and restart it .
Would you please help me in deciding the order of different queues(Capture/Apply/Propagation)
Thanks in Advance!!!
Kind Regards

I always stop capture first; and ensure it has gone down cleanly by checking the alert log.
Then propagation (which may hang on the first attempt before it times out), then finally apply (followed by another alert log check).
Rgds
Mark

Similar Messages

  • How to start and stop a queue in ECC??

    Dear all,
    I have a problem regarding the Start and Stop of queues in ECC. Whenever I change the data in ECC (for example extension of a material to a new distribution chain, or Creating a quotation which has to trigger a corresponding quotation in CRM), replication is not happening to CRM. On analysis of the outbound queue in ECC, we are finding corresponding ernties for the material / quotation. On dbl cliking an entry, we are able to see the queue in STOP status. When tried to reset status and activate, system throws a message saying GENERIC STOP SET.
    1) How to overcome this problem?
    2) How to START or STOP a queue (for Eg: R3AD*) in ECC? 
    Please respond.
    Every point you share will fetch so many points / lot many smiles to you (No surprises.. I am plagerizing the famous quote on SDN)
    Regards,
    Rajesh

    Dear Chandra,
    Thanks for ur quick response. I have awarded you a sixer. Ofcourse, the content is much richer than that. But if i award 10, thread has to be closed. So that stopped me from awarding that
    Dear all,
    Can someone else share their views?
    Regards,
    Rajesh

  • How to start and stop the BI Services in Solaris 10

    Hello All,
    Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
    Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
    Any help will be appreciated
    Thank you
    Ash
    Edited by: 902739 on Jan 11, 2012 12:17 PM

    Please help me by showing action plan for stop sap , offline backup and then start sap.
    i am little bit confuse How to start and stop SAP on cluster for offline backup
    Below are the systems name with host name , please explain me in sequence
    Systems name                                   Hostname
    # Hope SAP ERP Prod DB Primary       gsgbbux860
    # Hope SAP ERP Prod DB Standby      gsgbbux861
    # Hope SAP ERP Prod Cluster              gsgbbux862
    # Hope SAP ERP App 1                       gsgbbux864
    # Hope SAP ERP App 2                       gsgbbux865
    Thanks in advance
    Zaheer

  • Start and stop the Communication channel from Java Mapping

    How to start and stop the Communication channel from Java Mapping in XI 3.0
    Scenario  PI - > MQ -> Third Party web application 
    Web application is down and then Communication channels are stop manually .  
    We need to automate this process,
    MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
    Trigger will send u201CSTOP u201C message to PI
    How to configure PI scenario to stop different com channels when this message received ?

    check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
    make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
    However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties.

  • With apple pages - how do I start and stop the correction system/ spell and grammar, etc proof reader?

    How do I start and stop the corection system - das Korrektursystem/ the program in pages where one mark a text while proff reading it?

    Pages version?

  • Report on active sync actions (like starting and stopping the sync)

    Is there a way to report on who stopped or started an active sync? I'm guessing it has to be stored somewhere, but I can't find it.
    Thanks!

    Hi Smit,
    I believe you are talking about FMS AWS instance and you may be using a centos 4.0.2 instance AMI or lower?
    Well ... earlier,  options for stopping a centos AWS image was not available, but recently they are there in place, so I suppose if you use a new centos 4.5.1 AMI then probably you can start stop the aws instance on yuor will. Give ut a shot and let me know.
    Regards,
    Shiraz Anwar
    I again cross-checked and found that you were right, start and stop is not supported there .... an alternative method is to take a snapshots of the runinng instnace and terminate that instance after that, later you can use your snapshot to attach to the EBS volume to run your system again. You may need to use the Elastic IP address, because you wont like your users to update each time you terminate the old instance, and create new instance from snapshot. I have never used it in this way, but this is one of the approach.

  • About the bat file to start and stop the weblogic server10.3

    I am using windows 2003 os.
    i installed the WLS 10.3 .
    can anyone help me how to write the bat file for starting and stoping the weblogic server instance.so that it willl run as background service.
    I am new to this .Please suggest me
    Any help is appreciated.
    Thanks
    Sailaja.

    Hi David,
    yes.i am talking about Admin server.
    when i am creating the new domain,i didn't encounter any prompt asking me to run the Admin server as windows services.why i am not getting this prompt?where exactly i will get this prompt while creating domain.
    i am using the weblogic 10.3
    how can i make the admin server as windows services.
    Thanks
    Sailaja.
    Edited by: sj0609 on Dec 2, 2008 4:02 PM

  • How to Start and Stop the SAP System

    Hi,
    I have installed "Sneak Preview"; Searched for start and stop scripts but there are more than one script which has named start.bat and stop.bat. Moreover, I searched the documents which comes with Sneak Preview but could find useful instruction there either.
    Question: Could you please point me to the documentation where it explains the starting and stopping SAP, for Sneak Preview?
    Thanks in advance
    Jawad Kakar

    Please help me by showing action plan for stop sap , offline backup and then start sap.
    i am little bit confuse How to start and stop SAP on cluster for offline backup
    Below are the systems name with host name , please explain me in sequence
    Systems name                                   Hostname
    # Hope SAP ERP Prod DB Primary       gsgbbux860
    # Hope SAP ERP Prod DB Standby      gsgbbux861
    # Hope SAP ERP Prod Cluster              gsgbbux862
    # Hope SAP ERP App 1                       gsgbbux864
    # Hope SAP ERP App 2                       gsgbbux865
    Thanks in advance
    Zaheer

  • When I acquire data using USB6008 and NI_DAQmx Base in VC++, Shall I start and stop the task in ONTimer function?

    void Ctest2Dlg:nTimer(UINT nIDEvent)
       DAQmxErrChk (DAQmxBaseStartTask(taskHandle));
       DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByScanNumber,data,100,&pointsRead,NULL));
      DAQmxBaseStopTask (taskHandle);
    If I do this, the program will halt in about half minute. But if I do not start and stop task in OnTmer function, the program will not halt and the data acquired is not corrected.
    Please help me! Thanks

    This is a duplicate post.  Please post any new replies to the linked forum.
    Samantha
    National Instruments
    Applications Engineer

  • Automatic start and Stop the SAP System

    Hi experts,
    We want to deploy the unattended/Scheduled Start SAP  and stop SAP in IBM i series. How to do it? I have tried with WRKJOBSCDE and putted the command STOPSAP or STARTSAP but after finishing the job, now result. But when I simply put command STOPSAP/STARTSAP it works(start and stop sap system).
    How to deploy it?
    Thanks
    Asad

    Hi Ken,
    yes, that is correct, but in the meantime, it is **** easier ;-)
    As SAPHostAgent starts automatically, it is just needed in the default profile:
    Autostart = 1
    This is a really nice new feature ;-))
    Regards,
    Volker Gueldenpfennig, consolut international ag

  • Starting and Stopping the Portal

    Hi all
       After deploying my PAR, I am restarting the whole <b>SAP Instance</b> in the Server.
    1. Is this the right way ???
    2. Is there any other easy way to restart/stop the PORTAL alone instead of touching the SAP Instance???
    Thanks
    Kay

    Hi Kay,
    You are right about custom login changes.But Normaly if you develop portal application and upload the PAr file ,you do not have to restart the instance.Portal runtime takes care of droping the existing copy of the PAR or replacing with newer version.
    This is what i get from help
    Portal Archive Files Deployment Cycle
    Use
    The deployment procedure for a Portal Archive (PAR) file consists of two steps:
    Uploading the PAR file into the application repository
    Notifying all Portal Runtime (PRT) nodes that a new version of the application is available
    Activities
    Uploading a PAR File to the Application Repository
    There is only one application repository and all PRT nodes and PAR files on the J2EE Engine cluster share the same content. The PAR upload procedure stores the whole archive in the underlying persistence layer. It also extracts all the information that requires fast access at runtime from the portalapp.xml.
    Modifying PRT Nodes
    Once the upload to the application repository is completed, the upload process notifies all PRT nodes. This step updates thelocal deployment of the portal application on each server. The update of the local deployment requires runtime deployment capabilities, and that is why all portal applications can be released. A PRT node:
    ·        Checks if the application is already loaded and drops the corresponding instance.
    This step also checks and drops all entities (applications, components and services) that depend on the current application.
    ·        Starts the deployment process.
    This process gets the PAR file from the repository and updates the local deployment by expanding the archive content.
    ·        Restarts all portal applications that have been dropped.
    The main purpose of the local deployment is to improve performance at runtime by providing fast access to classes and to portal application resources. The local deployment avoids additional round trips to the application repository and, in that sense, must be considered as a cache for portal applications.
    Deployment Policy
    The local deployment is done using the DeploymentPolicy property declared in the portalapp.xml file:
    ·        If this property is set to “5.0”
    The deployment is backwards compatible with the EP50 version of the portal. The old folder is not removed and the deployment process simply overrides the folder with the new content.
    ·        If the DeploymentPolicy property is missing
    A regular deployment is performed; the old deployment folder is removed and then replaced by the new one.
    The deployment logic assumes that the application does not store any configuration locally; everything must be stored in the repository.
    For more information about the DeploymentPolicy property, see Application-Config Element Properties.

  • CAN WE START AND STOP THE CONTROL CENTER SERVICES USING OMB?

    Hi All,
    I'm new into the world of OMB and currently i have been working with OMB scripts and i just need to know whether i am able to start the control center services using OMB...?
    Any help will be highly appreciated.
    Regards,
    Shenoy

    Thanks ALL, I GOT IT, but I used other solution.
    Since I installed and uninstalled the Oracle several times, it keeps also many different Services for the listener. I don't know why, it didn't create a Service for my actual instalation with its path. In other words, all the services remained in the services.msc panel, had the path that was already removed from the Windows folder.
    Then what I did, was that I picked one service, took its name (OracleOraDb10g_home1TNSListener), went to regedit to [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\OracleOraDb10g_home1TNSListener] and simply changed the image path that was setted for the one that was removed (C:\oracle\product\10.1.0\Db_2\BIN\TNSLSNR ) for mine that is installed right now
    (C:\oracle\product\10.1.0\Db_1\BIN\TNSLSNR). Nothing more and finally works.
    I have tried something in the services.msc panel before, as you can see in this forum at the thread "I can't start listener in the Control Painel/Admin Tools/ Services", but I never got
    success.
    Appreciate your time!!

  • Starting and Stopping the Oracle Enterprise Manager Console

    I read 2DayDba. Here was written:
    Log on to the operating system as the oracle user. Issue the following command to start the dbconsole process:
    emctl start dbconsole
    I opened cmd and wrote that.
    Enviroment variable  ORACLE_SID not defined. Please define it
    I understand it, but I don't know excatly.

    Windows
    set ORACLE_SID=<yoursid>
    Bash
    ORACLE_SID=<yoursid>; export ORACLE_SID
    Kornshell
    export ORACLE_SID=<yoursid>
    emctl start dbconsole
    Sybrand Bakker
    Senior Oracle DBA

  • How do I start and stop the SolidWorks Simulation by Labview function?

    Hi folks I have two question.
    1. According to "NI SoftMotion for SolidWorks - FAQ http://zone.ni.com/devzone/cda/tut/p/id/10493#h49", an user can manually by right-clicking the SolidWorks assembly in the Project Explorer and select Start Simulation. How to start simulation by Labview function?
    2. How to produce setup program(include Solidworks assembly) by Application Builder? An user can simulate without Labview 2011.

    Thankyou very much for your reply, i am new to Actionscript so your help was really good, I did the following code which seems to work ok.
    I now need to get the time that elapsed from the first to the second key press so I can move an object on the stage a set number of pixels, for example; 1 sec move 10 pixels, 2 sec move 20 pixels etc
    Any further help would be greatly appreciated.
    Thanks again.
    Mick
    import flash.utils.Timer;
    import flash.events.TimerEvent;
    import flash.events.KeyboardEvent;
    var myTimer:Timer = new Timer(100,100);
    myTimer.addEventListener(TimerEvent.TIMER, fl_TimerHandler);
    var fl_SecondsElapsed:Number = 1;
    function fl_TimerHandler(event:TimerEvent):void
    trace("Seconds elapsed: " + fl_SecondsElapsed);
    fl_SecondsElapsed++;
    stage.addEventListener(KeyboardEvent.KEY_DOWN,keyDownHandler);
    var myKeyBoolean = false;
    function keyDownHandler(event:KeyboardEvent)
    if (event.keyCode == 86)
      myTimer.start();
    else if (myKeyBoolean == false)
      myTimer.stop();

  • How to Starting and Stopping OC4J Server using Ant

    How to Starting and Stopping OC4J Server using Ant
    In the ant task definitions for ant-oracle-classes.jar (see antlib.xml) there are two tasks called
         name="restartServer" classname="oracle.ant.taskdefs.deploy.JSR88StartServer"
         name="shutdownServer" classname="oracle.ant.taskdefs.deploy.JSR88ShutdownServer"
    I thought that these would shutdown and start the OC4J server. I guessed the parameters as – (Does anyone know where 50 ant targets are documented?)
    <oracle:restartServer
    userid="${oc4j.admin.user}"
         password="${oc4j.admin.password}"
         deployeruri="${deployer.uri}"
    />
    <oracle:shutdownServer
         userid="${oc4j.admin.user}"
         password="${oc4j.admin.password}"
         deployeruri="${deployer.uri}"
    />
    This, however does not start and stop the SOA suite. To do that I've hacked this solution together -
    <path id="oc4j.console">
         <pathelement location="${oracle.home}/config"/>
         <pathelement location="${oracle.home}/jlib/startupconsole.jar"/>
         <pathelement location="${oracle.home}/opmn/lib/optic.jar"/>
         <pathelement location="${oracle.home}/lib/xmlparserv2.jar"/>
    </path>
    <target name="stop" description="stop oc4j server" depends="init">
         <java classname="oracle.appserver.startupconsole.view.Runner">
              <classpath refid="oc4j.console"/>
              <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
              <arg value="stop"/>
         </java>
    </target>
    <target name="start" description="restart oc4j server" depends="init">
         <java classname="oracle.appserver.startupconsole.view.Runner">
              <classpath refid="oc4j.console"/>
              <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
              <arg value="start"/>
         </java>
    </target>
    This sort of works – except when the SOA suite doesn't stop cleanly – and needs user interaction to press a Close button. This isn't very useful when doing a continous integration build and deploy.
    So, does anyone have any suggestions or alternative methods to do this?
    - frank

    Actually if the server throws exceptions when it stops (which it always has since we applied patch 10.1.3.3) this technique will pause until a user responds to pop-up ... So a better way (I think) is -
    <target name="start" description="start oc4j server" depends="init">
    <java classname="oracle.appserver.startupconsole.view.Runner">
    <classpath refid="oc4j.console"/>
    <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
    <arg value="start"/>
    </java>
    </target>
    <target name="stop" description="stop oc4j server" depends="init">
    <echo message="We expect OC4J *NOT* to stop cleanly, so we will timeout after 3 minutes ..."/>
    <java classname="oracle.appserver.startupconsole.view.Runner" fork="true" timeout="180000">
    <classpath refid="oc4j.console"/>
    <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
    <arg value="stop"/>
    </java>
    </target>
    <target name="restart" description="restart oc4j server">
    <antcall target="stop"/>
    <!-- wait for server to quieten down -->
    <waitfor maxwait="2" maxwaitunit="minute">
    <not><http url="http://${oc4j.http.hostname}:${oc4j.http.port}"/></not>
    </waitfor>
    <antcall target="start"/>
    </target>

Maybe you are looking for